Set up a new document to print

I'm new to InDesign. Loved PageMaker! I need to set up a document for an elementary school yearbook. In PageMaker I set it up as a Letter size single pages and then I asked to build a booklet, printing to 11 x 17 paper. How do I set up to print a booklet on 11 x 17 in InDesign? Please help!

See:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities
If you want all the same setting like mail a then restore the new iPod from the backup of the old one. Otherwise, set it up as new and sync what you want.To restore from backup see:
iOS: How to back up

Similar Messages

New document type--printing PO

Hi, I created new doc types and I noticed that the POs created under the new doc types did not displayed anything in the Messages (printing). Do I have to configure the output control? if yes, how? thanks so much!

Hi
You may not view it in the dropdown list, for message setting whe you are creating the condition record, you select the output type in MN04 (NEU or any other customised out type for PO) , from the key combination when you are selecting Purchasing output determination: Document type and executing , you will find the condition record fields enter your new document type directly instead of selecting it from the drop down. It will pick the details as you wish. There is no configuration required for this.
Regards

InDesign CS2 Setting up a new document

When opening a new document how do you get three pages to view in the page layout? (For instance when creating a six page folder.)

In the pages panel, disable allow pages to shuffle. Then just drag the
pages to the spread you want them to be part of.
It's a bit tricky but you'll get the hang of it.
Bob

How do I set up new Document Profile with custom page sizes?

I see that different profiles have different sets of page sizes. I need a set of page sizes which I use often, and I would like to create a set of these sizes in a new profile, or at least somehow add them to the very minimal set of page sizes which can be selected when setting up a new document. Can this be done?

Thanks Jerron, I have done this but it only adds one document at one size to the list of presets. The list of sizes that comes with it is the same as the preset it was created from originally. What I would like to do is add to the list of sizes which comes with any one of the document presets or create a new one with a new list of sizes.

Set a preview document to print limited copies?

Hi,
Is it possible to set a preview (PDF) document to print only a certain number of copies after which it would then become locked (password protected)?
Thanks in advance for any help,
Dave

Yes, I take your point. Once the genie's out of the bottle...
BDAqua wrote:
Hi Dave,
I don't think so, I think you'd have to wrap it in some kind of Script or App that kept track of how many times it printed, but then how would you prevent them from copying/duplicating the whole thing???

"New Document" button on ribbon not working in the "Master Page Gallery" in Internet Explorer 10 & 11

I'm trying to add a "JavaScript Display Template" to my "Master Page Gallery" but when I click on the "New Document" button and select "JavaScript Display Template" it opens the "Add a master page" dialog
and prompts me to upload a file. I've ran into this problem with "Compatibility View" set to both "On" or "Off". I'm able to upload files but I can't get the new forms to show up.
This happens on the root site collection site. For subsites, the "New Document" button is completely grayed out.
FYI - I am a site collection admin and in the "Owners" group for each site.
How can I fix this?

Hi,
According to your post, my understanding is that "New Document" button on ribbon falied to work in the "Master Page Gallery".
In the root site, please make sure you enter all the necessary information when you upload file.
In the other word, you need to make sure the save the “JavaScript Display Template" successfully.
In the subsites, when you click the “Master Page” under Master Page Gallery in the sub site site setting page, the "New Document" button is completely grayed out.
If you want to add the template, you need to active the “SharePoint Server Publishing” feature in the Site sitting->Manage site features.
However, the “Master Page” under Master Page Gallery will become to “Master pages and page layouts”.
If you click the Master pages and page layouts”, you will go to the
Master Page Gallery of the root site, and then you can add Document.
Thank you for your understanding.
Thanks,
Linda Li
Linda Li
TechNet Community Support

Problems moving edited photos onto a new document.

I am new to Photoshop CS3 extended and i am having problems moving an edited photograph to a new document for printing. I get a screen stating 'The target document has a different depth than the source document. This may result in lower than expected quality. Are you sure you want to proceed' If i say yes nothing happens,
if i try to print from the edited photograph without moving it onto a new document it doesnt fit onto an A4 paper and comes up with 'Specifit print settings (Interpolation, Calibration,Encoding) will be ignored since you are printing to a non post-script printer.
This has just started to become a problem I have not changed printer which is a printer/scanner/copy Lexmark 4550 please help

Sounds like you are trying to make a move a 16bit image into an 8 bit image. besure to convert it before you transfer.

[CS4] Default new document profile

If I create a New Document Profile, how do I make it the default? I did it in
CS3 but can't remember how.
Michael
mhphillips at gmail dot com

On Wed, 29 Oct 2008 17:52:13 +0000, I wrote:
> If I create a New Document Profile, how do I make it the default? I did it in
> CS3 but can't remember how.
Now here's a strange thing. I installed AI 14 on my laptop and set up a new
Document Profile exactly as I had done on the G5. On the G5 when I request a
new document it defaults to "Custom" albeit with the settings I had
specified. On the laptop it defaults to my named New Document Profile. So why
is the Profile name not displaying on the G5? Mystery. In a minute someone's
going to advise me to trash the preferences!
Michael
mhphillips at gmail dot com

New document settings

How do I set up a new document in millimetres instead of picas? Please help!

With InDesign open, but no document open, set Preferences > Units and Increments to millimetres.

How to setup new document for Desktop Wallpaper

hi all
new to the forums here...
i'm making a desktop wallpaper to display an announcement for my graphic design department at school, and i'm wanting to know the best way to set up the new document in PS CS4. i'm using the resolutions found under syst prefs > display prefs, just plugging those numbers into the new document setup for width and height. my question is what resolution i should use for a clean and sharp wallpaper, and should i just accept the default settings for color mode, color profile, and pixel aspect ratio.
FYI: right now i'm working on an 20" Intel iMac. models at school include 17" iMac G5's or early Intel iMacs, 20" and 24" aluminum Intel iMacs.
thanks in advance,
daniel

"my question is what resolution i should use for a clean and sharp wallpaper, and should i just accept the default settings for color mode, color profile, and pixel aspect ratio."
The resolution is irrelevant - pixel dimensions are all that matter. For instance, if the target desktop dimensions are 1920x1200 pixels, it doesn't matter if the resolution is 72 ppi or 300 ppi. Color mode should be RGB, profile should be sRGB and use square pixels.
-phil

HT3500 I am trying to hook up my new Canon MG5320 printer wirelessly to my MacBookPro with OSX.8.2. The Airport Extreme Base Station does not have a WPS button and so I seem to be stymied even though the printer detects the Airport Extreme. Suggestions?

I am trying to set up my new Canon MG5320 printer to my wireless network. However, there is no button on the Airport Extreme to push when I get to that step in the set-up directions. I am using OSX.8.2. Suggestions please!

If the display shows the "Press and hold the WPS button..." message on the MG display, press the red Stop button on the MG and then select Standard Setup. The MG will search for networks and should display your Airport Extreme's network name. Select this and then enter the password to connect to this network.

Creating a new document with columns and printing effects

If you create a new document and set columns into it in the new document menu, and then subsequently create images, tables, text etc. in the document that are bigger than one column (that stretch for example across the entire page), will the part of the image that's in the gutter print and/or show up if it's saved as a PDF?
Help!
Thanks!

Guides are only there as a reference for you to help in alignment.They don't restrict what or where objects can be placed or affect their visibility or printability.
To see what your page will look like in print, switch to Preview Mode (fast way is to press W with nothing selected).

History report page prints before printing each new document?cc=us

How do i stop my HP Officejet 6700 Premium from printing a history report page before printing each new document, using Windows 7 & Using Microsoft Word? When I open a document and print it, it prints a history including: File Name; Directory; Template; Title; Subject; Keywords; Comments; creation Date; Change Number; Last Saved On; Last Saved By; Total Editing; Last Printed On; As of Last Printing....
Everything worked perfectly for a year, then I had to reinstall the printer because I deleted it by mistake. I cary it with me when I travel to meetings and didn't have my install disk, so I had to download the install software. I haven't changed any settings in Word, but it appears that the report is generated from Word.
Help will be appreciated. I can't find any other topic like mine to see an already presented solution.
This question was solved.
View Solution.

Hi,
The report indeed being generated by Word and not by the pritner driver.
As you did not clarify your MS Office version I included the steps for Word 2010, I believe the same should also apply for Word 2007:
From Word click the File menu, then select Options.
Select Display from the left pane.
Under the Printing Options sections, uncheck the box next to Print document properties.
Click OK and try printing again.
If you cannot find the specific option, please clarify your exact Microsoft Wiord version.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I have two AppleID's. Can I set up a new Apple ID just for document syncing in iCloud? How?

I have two AppleID's. Both use known email addresses. I need absolute security for documents. Can I set up a new Apple ID just for document syncing in iCloud? How?

Sorry, I did not mean to imply that security was non-existant or horrible, just it is online, so no absolutes.
iCloud is really not useful, IMO, for collaborating as only you or your AppleID enabled devices can access the files.
I have multiple online storage accounts with the common free services, but my most used is www.box.net. Many document apps will readily support it, and even if one does not, you can use the box.net app itself to access files, then open them in the app usually. And you can share your online folders, with reasonable controls on access to keep control of who can see (and upload or download) what.
A lot of people I know use dropbox as well, but they are usually using paid accounts (often their company sets one up for them to use to exchange files with clients) and I don't know how much better is the security on a paid dropbox account versus a free one. I suspect the free ones are on a par with box.net.
You could also use add security by using some sort of PGP or other encryption tools to encrypt files put up on the shared folder(s). You'd exchange public keys with your colleagues so they could decrypt those files once they download them. That may be overkill for many peoples needs though.
Another option, if you have an online hosting account, is to get one that offers SFTP access and use that for sharing files (the downside of that is having to distribute the password to colleagues, so you could loose control of it if one of them is careless or thoughtless with it). It seems more and more document-type apps for iOS are supporting generic FTP and SFTP as well as the popular free online storage solutions.

Problem while print preview purchase order for new document type

Dear Experts,
I have got the problem as below and need your helps.
I created a new purchasing document type and then created a new PO with this document type. PO was created successfully in the system. I added a message to print out PO with the followed parameters as NEU output type, 1.Print Out medium , VN partner function, dispatch time is 3 ( Send with application own transaction).
Then, I clicked Print Preview button on the ME23n screen, the error message bellowed was shown
"The combination of document type
and Purchasing organization is invalid.
please check the document and change it.
unable to print the form"
I really want to print the PO with new purchasing document type on the existed purchasing organization, Could you please help me identify the problem and solution for this issue?
Appreciate for your responses.
Thanks,
Tinh Vo Trung
Edited by: Tinh Vo Trung on Sep 23, 2011 7:43 AM

Dear All,
Many thanks for your responses.
Regarding to maintain the condition record in MN04, I already done for that but the problem was not resolved.
Could you please come with the other posible causes and solutions for this issue?
Dear Bijay Kumar Barik,
Please let me know why we check the new document type in Program, Routine and From of NEU output type?
p/s: I compared the version the program, FORM and routine of NEU output type and found that there is no the differences btw DEV server and QAs server. However, An PO created susscessfully in QAs server, but the error was happend in DEV server.
Could you please come with the other posible causes and solutions for this issue?
Thanks,
Tinh Vo Trung

Set up a new document to print

Similar Messages

Maybe you are looking for