Get actual disk size of all updates in particular WSUS category
Hi everyone!
I need a tool (maybe PoSh script, or SQL command) to get current files size on disk of WSUS updates category, e.g. Drivers.
Is there anywhere something that can help me?
Thanks!
Looks like PoshWsus might be the way to go: get-poshwsusupdate can be filtered to just pull updates based on the classification, and these could be passed to Get-PoshWSUSUpdateFile, which returns the file sizes. Would take a little scripting,
but should be do-able
#Import PoshWSUS great Powershell Module
Import-Module PoshWSUS
#Connect to your WSUS server
Connect-PoshWSUSServer -WsusServer wsus.local
#Define Updates scope - only Drivers
$DRVScope = New-PoshWSUSUpdateScope -UpdateTypes Driver
#Get all drivers, get file info about each one and measure TotalBytes property
Get-PoshWSUSUpdate -UpdateScope $DRVScope | Get-PoshWSUSUpdateFile | Measure-Object -Property TotalBytes -Sum
That script save me a lot of time!
Thanks Michael, thanks PoshWSUS authors!
Similar Messages
-
Hi, everyone, does anyone know how to get the size of the disk, say hard disk? In the Writing Device Driver it says that the block device driver must create an 'nblocks' property for each minor block device. I want to get the size of the block device in another driver. Is there any DDI/DKI kernel function for this?
How to get the same thing in a user mode application? Is there any API to do this?
Thank you very much.I just found a function in include/sys/conf.h. The prototype is:
extern int bdev_size(dev_t);
Can I use this function to get the disk size of the device dev_t? I couldn't find the documentation of this function.
Thanks -
When Firefox starts up it checks for add-on updates. Frequently I get "Firefox could not install the file at http://releases.mozilla.org/pub/mozilla.org/addons/10868/forefox_sync-1.6.3-sm+fb+fx.xpi because Download error -228"
This one is for Firefox Sync; I get equivalent for any others for which updates were found.
I find all updates will apply, or none. It's never some do and some don't.Thanks for the link. Unfortunately this doesn't help because without changing any setting the update will eventually install be it a day or three later.
If updates were disabled, then they would remain disabled and no updates would ever install (& I'd expect a more relevant worded message), which is not the case.
I would expect Firefox to find updates to extensions only if they were compatible, or again tell me "not compatible" rather than a nondescript "download error" message.
I have Firefox auto-updating so am on the latest release (not beta) most of the time .. until it tells me to download the latest. -
Imac slow getting online, after sleep. All updates done
imac slow getting online, after sleep. all updatea are don
Hi William,
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK. -
Consistent text size for all browsers
Can someone please point me to css help in understanding how to size text so it looks (relatively) the same in different browsers?
Hi
Browsers use different defaults for the font size, typically 14px and 16px. So in order to get a default size across all browsers, you have to set this for the body of the document.
You could use px, rem or % values for all your settings, all have there advantages and disadvantages.
Pixel values are a relative value on computers and similar devices and not an absolute value as many people think, so there use will vary depending upon things like, resolution and pixel-aspect-ratio.
% values are as good as ems but are more difficult to calculate.
rem values take the default pixel size of the browser and all values are then calculated according to this value. As the default value can be anything, you do not actually know what the user is going to see. As an example if the user has set their default value in the browser options to 20px then the relative value of 1rem is 20px, if however they have set this to 12 px then the value of 1rem is 12px, so the use of rem gives an unknown font size.
rem does have one distinct advantage over other forms of values in that it does not cascade and all values are worked out from the browsers default value, which is a fantastic usability feature as the user then decides on the size of any text, unfortunately it does also mean that the designer has no control over what this is.
em also has its disadvantages in that the value cascades, as an example suppose you have the value set in the body of 16px and the p tag at 1em, if you then set the default value for a div at say 2em, and the value for a p tag within the div at 0.75em the value for the p tag inside the div will be 24px not 12px, as it inherits the value of the parent as its base value
PZ -
How do I remove updates from the "all updates" list?
Hello, say I have been getting updates for Windows 7, and I fully migrated to Windows 8, how do I get to remove the updates for Windows 7 from the "All Updates" list within WSUS? I have tried de-selecting the Windows 7 product from the p roducts
and classification option, and I have tried runing the clean-up wizard, but they are not getting removed. Deleting the database and reinstalling WSUS can't be the only option....Uh... no... they weren't. No such concept exists. However, if you have an Automatic Approval rule configured on your WSUS server, that could account for such an action.
And all of that is aside from why these updates were imported from the Online Catalog in the first place, and not just synchronized normally like other updates.
What do you mean no such concept exist? They were approved by an admin, no one said anything about getting them imported, you are assuming these things, and normal sync was conducted.
Okay, let's clear up some logical impossibilities here. If the Server Cleanup Wizard deleted files, then the updates were DECLINED. Then the downstream servers WILL synchronize those declines, and the updates will be DECLINED
on the downstream servers.
Yes, that is theoretically how it’s supposed to work, but it does not, for example, my upstream server is showing 223 updates for FEP 2010, but my downstream server is showing 239 updates out of which 21 are invalid software updates.
This statement is logically inconsistent on a number of levels:
First, as noted, if the files were deleted, then the updates were declined on the upstream server, so they should now be declined on the downstream server.
Second, I have no idea what you mean by "red X representing an invalid software update". I'm not familiar with any such icon. Can you provide a screenshot?
Third, the servers are not "still getting the metadata". They get it ONCE. The day it arrives in the environment. After that, it's there FOREVER... unless deleted by the Server Cleanup Wizard.
As I already explained, theoretically the files should be synced up, but they don't and when I say that they are represented by a red X I am referring to the Microsoft's Technical Reference for the Icons Used for Software Updates which you can find here
http://technet.microsoft.com/en-us/library/hh848254.aspx
So here is the thing, you are saying that the metadata is there forever, but is it? I mean if the server cleanup gets rid of it that means it’s not there forever, right? Maybe I am missing something? As a side note, I did run the server cleanup wizard, and
it did not remove it since the icons with the red X's are still there...
So first question: Have you used the Server Cleanup Wizard on the downstream servers?
Yes, and it did not help. I am still seeing bad updates, as these ones for example –
Not possible, except by declining the update on the upstream server. Which should have already replicated.
Declining updates does not help me in this scenario for postdated KB's, only for the ones going forward.
I'll still need to figure out what you're talking about here, as I have absolutely no idea about these indicators.
Please refer to Microsoft's reference -
http://technet.microsoft.com/en-us/library/hh848254.aspx
No, actually. :-//
Does it now? :P -
Please for referral information, how can I get more disk space, or actually information and guidelines that can have enough free disk space. How, I have to delete documents or downloading to another drive. (The problem is that Safari could not download the file "iTunesSetup.exe" because there is not enough free disk space.Try deleting documents or downloading to another drive) ... Perhaps this is the main problem why can not open iTunes and inscription is: the folder "iTunes" can not be found or created, and is required. The default location for this folder is inside the "Music" folder. - And after options ok, appears option: Choose iTunes Library with inscription iTunes needs a library to continue. You may choose an existing iTunes library or create a new one - but still following options Choose Library and the following options can not open iTunes ... Please for instructions on how to eliminate the problem or eror ...
Mac is running OS X v10.6.8, Safari should be 5.1.10. Or Mac OS X / Version 10.6.8 / Build 10K549 / Serial Number W8****ATM / Processor 2.4 GHz Intel Core 2 Duo / Memory 4 GB 1067 MHz DDR3 or More Info:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2,4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1,07 GHz
Boot ROM Version: MBP71.0039.B0B
SMC Version (system): 1.62f7
Serial Number (system): W80394HFATM
Hardware UUID: 94647506-C5D0-5D73-BC7F-FC680D238F43
Sudden Motion Sensor:
State: Enabled
<Personsl Information Edited by Host>buy an external HD 1TB for $60
NO notebook is a mass storage device, so dont try to turn it into one, it doesnt work that way.
Unless youre using it every couple weeks, its static data and should be on an external HD
In the case of a Macbook Air or Macbook Pro Retina with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace. You should never be put in the position of considering “deleting things” on your macbook SSD in order to ‘make space’.
Professionals who create and import very large amounts of data have almost no change in the available space on their computers internal HD because they are constantly archiving data to arrays of external or networked HD.
Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your macbook has a HD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your computer to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation. -
How to get the file size (in bytes) for all files in a directory?
How to get the file size (in bytes) for all files in a directory?
The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
Furthermore the size is not retrieved correctly.
How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
Thank you
Peter
java.io.File f = new java.io.File("D:/todo/");
files = f.list();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (new File(files[i]).isFile())
System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }pstein wrote:
...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
Here is an SSCCE.
import java.io.File;
class ListFiles {
public static void main(String[] args) {
java.io.File f = new java.io.File("/media/disk");
// provides only the file names, not the path/name!
//String[] files = f.list();
File[] files = f.listFiles();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (files[i].isFile()) {
System.out.println(
"file[" +
i +
"]=" +
files[i] +
" size=" +
(files[i]).length() );
}Edit 1:
Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting. To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form. It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM -
My time machine 3 TB HD was encryption enabled and it took forever. I tried reformattiing, it is online, but, get this Partition map repair failed while adjusting structures to fit current whole disk size. Any comments appreciated.
This issue has been in discussion (actively) since last August here:
https://discussions.apple.com/thread/4218970?start=0&tstart=0
After months and months of new reports, it's pretty clear that this is an Apple Mountain Lion problem and one that Apple needs to address. As one frsutrated user noted :
>>There is no consistent solution for a user. Apple has to supply it. All you can do is submit a bug report to
>> http://www.apple.com/feedback
Please, if you are encountering this problem you will save yourself a lot of wasted time and energey simple by joining me and others in asking Apple to fix this problem: Make a bug report.
Thanks! -
when i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?
Ok, it's just a glitch that it's not auto-rebooting from the disk.
Please backup your personal files off the machine to a regualr external drive and disconnect all drives before doing anything
Take the 10.6 disk out and clean and polish the bottom with a very soft clean cloth and a tiny bit of rubbing alcohol to cut the oils.
Stick the disk in and reboot holding c key down, this will make it boot from the disk and you can install Snow Leopard that way. -
Cannot get all updates from iTunes software
Hello. There is a strange problem.
Sometimes, when I open iTunes from my computer, a small number will be displayed after "Apps".
When I click the "Apps", I can also see that there are some updates available from the bottom link text.
But after I click that bottom link, I cannot get all programs which need to be update listed. When I update all listed, iTunes still says there are some apps to be updated, but when I click that bottom link, only a text "No updates are currently available. To check for updates for another Apple ID, sign in with that Apple ID."
At that time, I can get all updates from my iPhone - Apple Store. So all have to do, is update all apps from my iPhone and sync it back. But if some apps are not installed on this iPhone, I have no way to update it.
BTW, I've tried to click Store - Check for available downloads from iTunes on my computer. It's useless in this case.
Any solution? Thanks.It think its a bug. I got the same results under MX 7.0.2.
The topic of maxrows recently came up on another thread. I
did some searching and according to TechNote 18339 there was a
change with maxrow
"<cfquery maxrows=N> bug. ColdFusion MX (until ColdFusion
MX 7.0.1 CHF2) didn't pass maxrows to the underlying driver
(statement.setMaxRows())"
Given the results you're getting, it sounds like CF is
applying the maxrow to all of the resultsets, not just the one
where maxrows was declared. I suspect cfstoredproc's usage of
statement.setMaxRows() is incorrect. Thats just a guess though.
Bottom line, I think you'll need handle it manually.
Personally, I would recommend placing the row count logic in the
stored procedure (if possible). The overall results will be more
consistent and you won't have to worry about this kind of issue
again.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_18339
http://livedocs.adobe.com/coldfusion/7/htmldocs/00000314.htm
http://www.remotesynthesis.com/blog/index.cfm/2006/3/23/Maxrows-Issue-in-CFQuery -
When I try to open a Pages document from iCloud, created on my iPad, I get message stating I need a newer version of Pages. When I go to app store all I get is "installed" when looking at pages app. my Macbook pro is up to date with all updates. Any ideas?
You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has not only managed to confuse all its users, but also itself.
Note: Apple has removed over 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter -
I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared. I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
In checking the log files, here is the message repeated over and over....
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file'
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file' with userInfo = {
NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
NSSQLiteErrorDomain = 21;
Jul 4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
Jul 4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
Jul 4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Any ideas on what to do next?
I'm running and iMac 20-inch early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.4 (12E55)Step 1
Quit Calendar. Triple-click the line below to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
Step 2
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal. -
Repeted updates to Genius do nothing. I always get an error message for all 13,000 songs I have. My disc drive crashed and its taken months to reload click by click every song from the cloud or my computer. iTunes repeatedly crashes if you try to load more than about 50 songs at a time, and always crashes around the 200th song. All my playlists were erased and when I synch one of my two iPods everything on that was erased including all the play lists, I don't ever want to synch my other iPod because it still has dozens of my play lists that it took years to create based on 13,000 songs. So warning iTunes totally ***** if this ever happens to you. My Zune account on the other hand was fine. Anyway back to the question at hand - Genius use to work for my collection. Genius still works for the iPod which I will never synch again, why doesn't it work for my collection now despite repeated updates. Suppose its just another buggy Apple piece of software. BTW don't ever use Apple's iCloud it eats your entire music collection, erases it from you computer and then doles it out one click at a time from the cloud - another stupid piece of software from the geniuses at Apple. But why am I surprised Apple destroyed the record industry, so why not destroy everyone's CD collection and just reduce us all to slaves of iTunes and its magic. I'm sick of Apple and its bloated reputation for great software.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up").
In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC. Now try another QuickTime install (Version 7.7.1). Does it go through properly this time? -
how to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.
Hi bluegrandpanash,
Thanks for visiting Apple Support Communities.
If you backed up your iPhone to iCloud before updating the software, first try the steps under "Restore from an iCloud backup" in this article to recover your data:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Best Regards,
Jeremy
Maybe you are looking for
-
How to use a ip address for pop & smtp server names when creating a new account
My xp PC is on a lan behind a Freebsd os [IE. flavor of unix] which is not running a dns server. The only way to reach it is by ip address. I have configured the account with a ip address for pop & smtp. When I create and sent a email, Thunderbird sh
-
I am in the process of designing a website-on-a-CD. In order to make things easier for my clients, I decided to organize this site into local sub-directories with an index.html page in each one. However, when I try to enter the local sub-directory na
-
Itunes download list not updating
Hi, I have got an odd problem. I have an Ipod touch, which recently finished a batch of 250 downloads, I was expectting the ipod to get the next lot of downloads in terms of the downloads list automatically, but this has failed. I have tried pressing
-
Adobe 3D Reviewer: "renaming"doesn't work!
Hello, I'm an applied scientist doing numerical modeling and visualization. In the research group we used Acrobat 3D as a better way to communicate with colleagues and our clients. I just downloaded the trial version of Acrobat 9 Pro extended and had
-
Collapsible panel in morphing panel
Hi, Hope this isnt too complicated: I searched and found that if you have a nested collapsible panel within another, you can fix the downward expandible problem by changing line 431 of SpryCollapsiblePanel.js from: this.content.style.height = this.to