Cannot get all updates from iTunes software

Hello. There is a strange problem.
Sometimes, when I open iTunes from my computer, a small number will be displayed after "Apps".
When I click the "Apps", I can also see that there are some updates available from the bottom link text.
But after I click that bottom link, I cannot get all programs which need to be update listed. When I update all listed, iTunes still says there are some apps to be updated, but when I click that bottom link, only a text "No updates are currently available. To check for updates for another Apple ID, sign in with that Apple ID."
At that time, I can get all updates from my iPhone - Apple Store. So all have to do, is update all apps from my iPhone and sync it back. But if some apps are not installed on this iPhone, I have no way to update it.
BTW, I've tried to click Store - Check for available downloads from iTunes on my computer. It's useless in this case.
Any solution? Thanks.

It think its a bug. I got the same results under MX 7.0.2.
The topic of maxrows recently came up on another thread. I
did some searching and according to TechNote 18339 there was a
change with maxrow
"<cfquery maxrows=N> bug. ColdFusion MX (until ColdFusion
MX 7.0.1 CHF2) didn't pass maxrows to the underlying driver
(statement.setMaxRows())"
Given the results you're getting, it sounds like CF is
applying the maxrow to all of the resultsets, not just the one
where maxrows was declared. I suspect cfstoredproc's usage of
statement.setMaxRows() is incorrect. Thats just a guess though.
Bottom line, I think you'll need handle it manually.
Personally, I would recommend placing the row count logic in the
stored procedure (if possible). The overall results will be more
consistent and you won't have to worry about this kind of issue
again.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_18339
http://livedocs.adobe.com/coldfusion/7/htmldocs/00000314.htm
http://www.remotesynthesis.com/blog/index.cfm/2006/3/23/Maxrows-Issue-in-CFQuery

Similar Messages

Cannot Install or Update the iTunes software- Nothing is working

I purchased a ipod Touch and plugged it into my Dell laptop. It knows it's attached but the software that I need refuses to update or recognize the new ipod. When I tried to follow the steps laid out in a prev. post it did nothing to solve the problem. I tried to change and repair the software, got nothing. I try to uninstall the software and this is what I get:
"iTunes could not be installed because Visual Basic Script (VBScript) is not installed or has been disabled. Make sure VBS is installed, turned off script blocking in anti virus and personal firewall software. Re registrar VBScript and then install itunes."
How do I do this and what other options do I have to get the latest software for my iPod Touch?

I found a way to answer my own question lol. If anyone is having the same problem, and judging from the other threads you are, here is what I did.
I have a Dell Inspiron E1505 computer but I think it's ok if you have 32 bit computer.
This is the steps I took:
Open a command prompt. Then type following commands :
cd C:\Windows\System32.
regsvr32 vbscript.dll
I found this information here:
http://answers.yahoo.com/question/index;ylt=AlzRlxvf3WnjIRnyeKFNakAjzKIX;ylv=3?qid=20070427015137AA93YaP
To go to the command prompt click the windows icon, accessories, and then click "command prompt." Then type the information quoted above. I found this by using Yahoo Answers and searching for the "vbscript" ipod error message.
As the post on Yahoo Answers states even if an error message comes up it will still work. I followed that post and my problem went away.
Hope this helps someone out there.

Cannot get all rows from cfProcResult

We upgraded one of our servers (A) from CF 6 to 7.02. Another
server (B) has CF 7.01.
On server B (CF 7.01) the code works (below), all rows of
each dataset are returned.
Now on server A (CF 7.02) all of the resulting datasets have
only the first record in them. If I add maxrows="-1" to each of the
cfProcResult tags there is no change. If I change that to
maxrows="100" then I can get the rows up to 100.
Is this a bug or is there a different means to return all
rows?

It think its a bug. I got the same results under MX 7.0.2.
The topic of maxrows recently came up on another thread. I
did some searching and according to TechNote 18339 there was a
change with maxrow
"<cfquery maxrows=N> bug. ColdFusion MX (until ColdFusion
MX 7.0.1 CHF2) didn't pass maxrows to the underlying driver
(statement.setMaxRows())"
Given the results you're getting, it sounds like CF is
applying the maxrow to all of the resultsets, not just the one
where maxrows was declared. I suspect cfstoredproc's usage of
statement.setMaxRows() is incorrect. Thats just a guess though.
Bottom line, I think you'll need handle it manually.
Personally, I would recommend placing the row count logic in the
stored procedure (if possible). The overall results will be more
consistent and you won't have to worry about this kind of issue
again.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_18339
http://livedocs.adobe.com/coldfusion/7/htmldocs/00000314.htm
http://www.remotesynthesis.com/blog/index.cfm/2006/3/23/Maxrows-Issue-in-CFQuery

How do you get all downloads from itunes on all authorized computers

I downloaded audiobook to home computer...how do I download to laptop and work computer?

You move the file to the other computers as you would any file, and then drag it into the open iTunes program window. Audiobooks normally only allow one download per purchase.
(121712)

Once I updated to the latest version of iTunes, I now cannot get all my apps to update. Then syncing up. Poor way of doing business with little help.

Once I updated to the latest version of iTunes, I now cannot get all my apps to update. Then syncing up. Poor way of doing business with little help. Need help?????

Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

HT1212 my ipod is disabled, i have tried the steps to restore, but i get a message from itunes saying i have to enter my password to open itunes, meanwhile i cannot enter a passcode on the touch b/c it is enabled. i do not have the original computer i sy

My ipod was disabled by my son entering the wrong pass code. I no longer have the original computer i sync to. I have tried to restore using the instructions sent by Apple Rep, and on these help pages. I get a message from itunes saying that cannot connect to ipod touch b/c it is disabled, that i need to enter passcode to continue.. meanwhile, the ipod touch is saying i am disabled and to connect to itunes. Any NEW ideas?

If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If none of the above work, try:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

When trying to get my music from itunes a message pops up on my computer stating the disk cannot be found, what is this? I cant get the new music i purchased

when trynig to get new music from itunes a message pops up on my computer saying the disk cannot be found. I dont know what this is, now i cannot not only get the new music i just purchased i seem to have lost all of my other music i already has as well. Is there anything I can do to fix this problem a get all my music back?

Thanks for all of your help. Took the old girl in to a techie at London Drugs and my HD had failed, simple mechanical failure after 5 years of useful service. They mentioned that it was a pretty massive failure as they were unable to extract ANY information whatsoever. For those of you wondering what the warning signs were: slowing down of all processes, especially opening applications; freezing up when running an internet applcation and browsing at the same time; occasional starting up with a flashing folder with the dreaded ? (which would restart the first few times once I disconnected all peripherals, including the keyboard); finally full failure with only a white screen showing upon start up.
I am getting a new HD, will reinstall from Time Machine and there will be peace in the valley.

I re started my computer and re intalled itunes. all my music is on my iphone and i cannot get it back on itunes. when i try to sync it tells me i am going to loose all my music. i really don't wont to go through all my CD's again so can any one help

i re started my computer and re intalled itunes. all my music is on my iphone and i cannot get it back on itunes. when i try to sync it tells me i am going to loose all my music. i really don't wont to go through all my CD's again so can any one help

See Empty/corrupt library after upgrade/crash or
Recover your iTunes library from your iPod or iOS device.
tt2

Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.

Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.
First, when trying to sync ipod touch to Itunes, nothing happened. After that, Itunes suggested downloading and installing updates but now updates will not finish installation correctly and launch error messages. Any ideas?
TKS !

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736B3s, or a different error code? If they're different, what codes are you getting in Windows Update?

Hello, I come to update the iTunes software it shows me an error 20 How do I solve this After I was once an error 13 appears. And that's just Mac Air. I would like to get an answer because it annoys me that it happens ...! Nimrod

Hello,
I come to update the iTunes software it shows me an error 20 How do I solve this After I was once an error 13 appears.
And that's just Mac Air. I would like to get an answer because it annoys me that it happens ...!
Nimrod

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

HT1296 I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

You copy them from your old computer or your backup copy of your old computer.
The iphone is not a backup/storage device.

How do I get all music from my iPod classic to itunes on my computer?

How do I get all music from my iPod classic to itunes on my computer? I was able to "authorize" the purchased music (40 songs) to download to laptop but I can't select my entire library (1500 songs) to download to laptop!

Recover media from iPod
See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
tt2

I am a resident of Canada. I cannot purchase any items from ITunes Store because I cannot update my billing address correctly. It is always default to US address. Why?

I am a resident of Canada. I cannot purchase any items from ITunes Store because I cannot update my billing address correctly. It is always default to US address. Why?

iTunes Store: Changing Account Information
http://support.apple.com/kb/HT1918
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Apple ID Support - Manage Account
http://www.apple.com/support/appleid/manage/
Switching an iTunes Store account to a different country
http://www.ilounge.com/index.php/articles/comments/switching-an-itunes-store-acc ount-to-a-different-country/
 Cheers, Tom

I am trying to update the itunes software on my Mac but I keep getting an instalation alert saying please close itunes. It is already closed, the only option then left is to quit instalation. I want the update though. . .

I am trying to update the itunes software on my Mac but I keep getting an instalation alert saying please close itunes. It is already closed, the only option then left is to quit instalation. I want the update though. Can anyone help?

Click on iTunes and do comand Q. Be sure you are quitting iTunes to finish update and not just closing the screen.

Cannot get all updates from iTunes software

Similar Messages

Maybe you are looking for