Get an employee company address

How to get employee company address? Table ADRC has company address but it has keyfield addrnumber. How to get 'addrnumber' value for that employee?

Hi Sentchan,
There is a field ADRNR(adress) in any master data table.
for your company address , in table T001 , you will get a field ADRNR.
Similarly in LFA1,KNA1 also.
in ADRC table you can get equivalent field ADDRNUMBER.
ADDRNUMBER = ADRNR.
Hope you understand well.
Regards,
Tutun

Similar Messages

Reg : How to get the company address in Crystal Report

Dear members,
I am stuck up with problem in Crystal Report in my project. I want to get the company address in the Crystal Report. How can i get the company address in the crystal report. Hope i will get help in this regard.
Thank you.
Regards,
Venkatesh Rajagopalan

Hi Dear
plz send me what is your methad to applay,
so i am sending u code   for company address
all company information contain the OADM table ,
so applay the select query ang get the data form table
this ia sample code ........
SAPbobsCOM.Recordset oRecordset = (SAPbobsCOM.Recordset)ICreon_SBOAddOn.SBOCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
                string GetComp = "select * from OADM ";
                oRecordset.DoQuery(GetComp);
                strCompName = oRecordset.Fields.Item("CompnyName").Value.ToString().Trim();
   Use this code u will find the company name
and after that pass this valu a parameter
oRPT.SetParametervalue ("CompanyName", strCompanyName)
so pass the strCompanyName as a parameter in the cdrystel report.
hope help this code ,
if u have any problem so plz send me question in form,
if u r satisfied my answer so pl give me rewards point,

In SAP Script how to hard code my Company address in footer window

Hi All ,
In SAP Script how to hard code my Company address in footer window .
Ex : in YB_F140_ACC_STAT this script i want to keep my company address, i want to hard coad , i dont want to use any field from table.
Please give me step by step.
Thanks
Sridhar

Hi,
You can make use of standard text...
create a standard text in SO10 with your company address
and in the footer window of your script.. use include text and provide the name of the standard text you created in SO10.
In the text editor... goto insert > text> standard
You get popup give the name of the text name id and language
regards
padma

Issue while synchronizing company address in SCUG

Hello All,
I wish everyone is fine. Before starting the thread i already did a search on my issue however i was not successful.
I am in the process of configuring CUA within a SAP instance with two different clients ( central and child).
Logical system name creation, assgnment, rfc's , system user, model view are in place with no errors.
Already ran the report RSADRCK2.
Now the issue i am facing is.
when i click on the button copy from child system i am getting the following error.
DEFAULT_COMPANY     Error when saving company address data
DEFAULT_COMPANY     010AMAddress doesn't exist 23016
Require guidance from experts!!!
Thanks and Regards
Madhu

Hello All,
I wish everyone is fine. Before starting the thread i already did a search on my issue however i was not successful.
I am in the process of configuring CUA within a SAP instance with two different clients ( central and child).
Logical system name creation, assgnment, rfc's , system user, model view are in place with no errors.
Already ran the report RSADRCK2.
Now the issue i am facing is.
when i click on the button copy from child system i am getting the following error.
DEFAULT_COMPANY     Error when saving company address data
DEFAULT_COMPANY     010AMAddress doesn't exist 23016.
I have checked the table USADDEF in central and child client.
The Address number is different in both clients.
Please let me know how i can maintain the address number 23016 to the sap standard company address in the table USADDEF without going for the developer keys.
Any alternative solution.
Require guidance from experts!!!
Thanks and Regards
Madhu

Problem Synchronizing Company Address in SCUG

Sorry, I'm not sure which forum I should post this message in but I'm in the process of implementing CUA in our clients and am trying to synchronize the Company address in the clients, but I get an error without any helpful information. I do notice that the clients in which I'm having a problem synchronizing have a different layout for company address. For instance, the central system's layout uses Country and Region in SUCOMP whereas the client in which I'm having problems synchronizing uses Country/City/State/and ZIP. The only error indicator I get is the red box with an "@5C@". I have been searching for solutions without much luck. Is this because the address layout is different (although the sync was successful in another client that had a different layout) or is it likely something else?

>
Chanda Barrick wrote:
> Sorry, I'm not sure which forum I should post this message in but I'm in the process of implementing CUA in our clients and am trying to synchronize the Company address in the clients, but I get an error without any helpful information. I do notice that the clients in which I'm having a problem synchronizing have a different layout for company address. For instance, the central system's layout uses Country and Region in SUCOMP whereas the client in which I'm having problems synchronizing uses Country/City/State/and ZIP. The only error indicator I get is the red box with an "@5C@". I have been searching for solutions without much luck. Is this because the address layout is different (although the sync was successful in another client that had a different layout) or is it likely something else?
Since you haven't received any replies, let me give this a shot.
What happens when you run SCUG on parent CUA and select child CUA system and click on "Company Addresses"? Do you at least get a "Sychronization of the Company Address" list. Please reply/post with "Overview" output.
John N.

Setting up new imac on network using dhcp nut not getting a valid ip address. Same happens when I try to connect via wi-fi. IP address being assigned is 10.45.190.195

Have new Imac that I'm setting up. Company is using DHCP to manage IP addresses. Mac is plugged into netgear hub along with a PC. Mac is getting an invalid IP address of 10.45.190.195. PC is working fine. I've powered the hub on and off. I've renewed th DHCP lease on the Mac many times but IP address always comes back as 10.45.190.195. I've plugged the network cable directly in the network port bypassing the hub. Same result.
Having the same issue when trying to connect via Wi-Fi,
Anyone experiencing this issue?

I see what you are saying. When I lived in the dorms, I was set up in bridge mode because we had that type of modem. My question now is do I distribute a range of static IP's or share a public? Either of these settings give me errors where the starting and ending DHCP addresses conflict. I use 10.0.1.1 and 10.0.1.100 and this error no longer seems to persist, but then I am not able to connect to the internet and the amber light keeps flashing- along with my computer showing that I am still connected to the TM.
Thank you for your support so far.

Company Address problem in new Client

Hi,
I created a new client and logged in with SAP. I tried to create user but no company address has been maintained in new client. I am getting error: No default co. address has been maint. in the system. Create an address. When I go to define company address, I am getting time zone error Time zone CET does not exist. How can I create new user with default SAP login and how do I overcome company address, time zone problem? Can someone give step by step after new customizing client?
Thanks,
Sangita

Hi,
When ever you create a new SAP APP Server you will get 000 client by default ya.
Create a new user ID SUPERUSER with the method copy from DDIC and by default all the chk boxes will get selected and one wil not
be cheked by default i.e. the Address box. see u can select the box here itself (or) u can process the further steps ya.
Create a new client 100 and select the client possition as CUST client and select the options as below
1)Dependent Level as : Automatic recording of changes allowed.
2)Independent Level as : Customizing and Workbench allowed.
3) Overwriting is allowed.
Login with 100 client and with SAP* ID and Password as PASS.
go to SCCL and select SAP ALL and run it in Batch job and in postinstallations steps
go and chk SICK/ go to SE06 / in configuring STMS it will ask you to maintain the company address here maintain the info and proceed with further ya.
Note: If you are satisfied with my guided lines drop me the points.
Prashanth

BAPI to find the Employee Emergency address..

Hi All,
I have tried using the BAPI 'BAPI_ADDRESSEMP_GETDETAIL' to get the employee emergency contact address. It gives me the error stating '0009No data stored in the selected period'. I can see the data for the employee in PA20 for the same period.
Can you please let me know if there is any other ways to get this details or how to correct the Error..
Regards,
Vidya.

I used the BAPI 'BAPI_ADDRESSEMPGETDETAILEDLIST' as I was trying to get the emergency contact details..
Regards,
Vidya.

SAP user company address

I just created a new client and logged onto it with the SAP* user so that I can create an administration user for setting up CUA.
It's a brand new client so I have to define the SAP user company address, but when I click on the drop down arrow for the country key, it says no values found. Is this characteristic of new clients? How can I get the address defined? Thanks!

Hi Vu!
I think, now I can track your problem.
Please check in SCC4, which setting client 000 has in field T000-CCCATEGORY (or directly with SE16).
Default (and correct) value is SAP Reference. If it's different in your system - deep ****. You should change this value back to SAP Reference (that's easy).
But whoever made this change, used this client for further changes - bad idea. Let's just hope, there is no mess.
There is no need to mark on client as productive - especially development and tests systems don't have this, only in production systems this setting makes sense.
Afterwards your problem should be gone - let's see.
Regards,
Christian

Company Address and sold party address in smartforms

Hi Experts,
How to fetch the Company Address in Heading window based on Plant . Sold to party address in smartform
How to do this .
Pls helpme
Thanks in Advance
purnaneelu

Hi,
Plant address you can get from table T001W by passing the plant name ( WERKS ).
Sold-to-party is nothing but customer, so you have to fetch the ADRNR from table KNA1 passing customer number ( KUNNR ), and pass ADRNR to table ADRC to get all address details.
Regards
Karthik D

How can I get the e-mail address (reply addr.) once connected to a server

My application ask the user to enter the POP3 server host name (+ port) more the
POP3 server userId and password .... I can get the e-mails and show the to the user ....
Now, the user want to send a message from that "account" and what I need
is to know the "reply address" (the "from address") to set to the outgoing message ...
I would like to get it somehow (from the API or in anotherway) without asking the
user to enter it ...
So, oonce connected to the POP3 mail server (successful login) is it
possible to get the e-mail address of that guy ??
please let me know if you have a solution ....
many thanks / regards / Max

You are of course trying to get an email address in the format of [email protected] You already have "username" the trick is the somedomain.com. I don't believe that the pop3 server has anyway to tell you this. Unless your host name is "fully qualified", i.e. pop3.somedomain.com, I don't know that you can get this information. Maybe you could take the IP address and do a reverse DNS lookup? Still you wouldn't really know if that is the domain the user really wants. For example I retrieve and send my email from aaa.com, but my domain for my reply-to is bbb.com. Your goal is noble, but perhaps not practical. That is why Outlook Express requires the user to enter their email address when setting up an account. Hope this helps.

How to pull multiple lines of info from a table for a Specific Company/Address

What I would like to do is have one Table that I enter all my information on in Numbers for incoming rent like the one below. Since I have 8 spaces to rent I will have up to 96 plus rows of information to look at. But I would like to have Numbers then on separate pages is have the individual Companies have their own rent break down on a table with the Date Recieved and the amount they payed. From there on their separate page I can have the Late Charges come into play or whatever I choose.
Date
Company
Address
Rent Recieved
Jan 1, 2011
X
430
$1,100.00
Jan 3, 2011
Y
440
$1,200.00
Jan 5, 2011
Z
450
$1,300.00
Feb 1, 2011
Y
440
$1,200.00
Feb 3, 2011
X
430
$1,100.00
Feb 8, 2011
Z
450
$1,300.00
Mar 1, 2011
Z
450
$1,300.00
Mar 2, 2011
X
430
$1,100.00
Mar 5, 2011
Y
440
$1,200.00
The following table would be on the separate page with the formula (I do not know how to write) grabbing the info from the above table.
Company X Rent Recieved
Date
Rent Recieved
From the formula that one of you gracious smart people provide I could create a table for each of the Companies that rent from me on their own Tables on separate Tabs.
I know I could go to each individual Tab and write it in but I will be primarily working on my iPad and this would make it easier. I can also utilize the fresh Tables to do other calculations.

I got a soluce with no swap.
I created a new column (E)
In E2, the formula is :
=B&IF(ISBLANK(A),"",MONTH(A))
Apply Fill Down
In table of each company, I inserted a 2nd header row so that I may store the name of the company in A1.
In A3, the formula is :
=IFERROR(OFFSET(Tableau 1 :: $A$1,MATCH($A$1&ROW()-2,Tableau 1 :: $E,0)-1,0),"")
in B3, the formula is :
=IFERROR(OFFSET(Tableau 1 :: $D$1,MATCH($A$1&ROW()-2,Tableau 1 :: $E,0)-1,0),"")
Select A3:B3 then Fill Down.
That's all folks !
Yvan KOENIG (VALLAURIS, France) jeudi 19 mai 2011 17:18:32
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How can i get my e-mail address linked to my skype...

I need help!!!!
How can i get my e-mail address linked to my skype user name.
Regards Gerald

You can use a different email account, but it will not appear on icloud.com as iCoud only hosts iCloud email. Just add your account to the email client on your PC as you would any other email account. To add the account on your iOS devices (iPhone), go to Settings>Mail,Contacts,Calendars>Add Account, choose your provider and provide your account details.
You can't redownload purchased ringtones from iCloud for free but you can sync them to your 5c using iTunes. To do so, connect your iPhone 4 to your computer, open iTunes and go to File>Devices>Transfer Purchases. Then go to the Tones folder of your iTunes library and confirm that the ringtones appear there. (If you don't see the Tones folder, go to Edit>Preferences>General and make sure Tones is checked in the Show options.)
Then connect your 5c to your computer, open iTunes, click on the name of your phone in iTunes, go to the Tones folder of your iTunes sync settings, then check Sync Tones and click Apply at the bottom to sync your phone.

How can I get my e-mail address associated with Adobe Digital Editions?

How can I get my e-mail address associated with Adobe Digital Editions?

gjortega,
Your sidekick may be relaying through a different server. If its on AT&T, it could be using cwmx.com for outgoing. However, cwmx.com only works for AT&T/Cingular EDGE customers. When on Wi-fi it won't allow you to send through it.
Many internet providers, but not all, provide an authenticating SMTP server to use when travelling. If you configured your outgoing server to use the email providers authenticating SMTP server information on a port different from port 25, you will be able to use it on most networks. Some wireless networks filter a wider range of ports, such as some work places.
This article discusses the issue in more detail:
http://docs.info.apple.com/article.html?artnum=305634
Hope this helps,
Nathan C.

How to get an iCloud email address?

I want to get an iCloud email address (@icloud.com) for several reasons, among them:
To streamline my iCloud account access so only that email is associated with iCloud & its services.
To provide email between Apple (e.g. Apple Support) and myself
To be able to use Notes
Currently, I am using the same Yahoo email address for both iCloud and iTunes.
However, I wonder if I can give those up and replace them by the iCloud.com email address?
Some details: I got a new-to-me iPhone a few weeks ago, which was reset, and so the only apps
on it are the default iPhone apps. I have not added any apps.Therefore, I don't mind having to do
another reset as long as I save the few photos and some phone number contacts to a Vcard.
Could I create a new iCloud email address and use that exclusively after reseting the iPhone?
I could restore the contacts and photos from the computer.

JacobianWife wrote:
What if I were to wipe the phone clean, and start from scratch, never using my current Apple ID at all, but then activate iCloud to get an @icloud.com email address?
Yes, you can do that - please see imp68's post here:
Re: I wish to transfer my Apple ID to a new iCloud account
If you do this, it's vital that you create a 'rescue address' which is a non-Apple address, because if you don't and something goes wrong with the account - for example if you forget your password - Apple can only contact you at the iCloud address which youy can't access.

Get an employee company address

Similar Messages

Maybe you are looking for