Get approval time

Hi all,
I want to get approval time of form in workflow.And then i want to show this information another form in WF.
How can I do this?
Thanks.

Similar Messages

How long does it take to get approval from iTunes Connect and how do I find out if they are working on it?

How long does it take to get approval from iTunes Connect and how do I find out if they are even working on it? I'm not really sure if my application was even delivered - from the links in IBA. Any suggestions how one might push the right buttons at Apple?
Also went around in a big circle trying to get beyond the confusion of not having the right Apple ID when I've had it a long time. Confusion abounds and learning this forum also takes a new degree of patience. Humbling to say the least :-)
Anyone been there done that?

[email protected]
[email protected]
…support phone number call +1 (877) 206-2092.
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada.

Error while approving time - Portal crashes or hangs up

Hello,
We have this one end user who approves time for a lot of people (>150). When trying to approve time as this user, portal crashes or hangs up. This user has approximately 5000 individual items combined that user needs to approve
Steps
1) Click on "Time to be approved" in MSS - PASS
2) A screen pops up and after about 7 minutes or so, user gets time to be approved for each employee by week. - PASS
3) User will then click on "Review" button at the bottom of the pop -up.
4) The individual item screen that shows time for each day where user can approve or reject is not coming up. Browser basically crashes or just hangs up.
Any ideas or suggestions is greatly appreciated.
Thanks.

It seems like this user may be approving time not as a supervisor but more as an HR payroll/personnel type of person. If this is the case and they are not really the supervisor of >150 people, I would recommend having the user run the report for approval in the backend (CAPS or CAT4 transaction).
If they insist on approving through MSS or if they really are a casual user/supervisor, then it seems they will need more PC memory to handle that much processing.
Also, we partitioned the CATSDB table and the approval reports runs in seconds now instead of minutes. We partitioned by year. This may help you also but doubtful since they are trying to approve so many employees at once.
Mark.

MSS Approve Time sheet data error

Hi,
In MSS Approve time sheet data I get a
The ASSERT condition was violated., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: The ASSERT condition was violated., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
at com.sap.xss.hr.cat.approve.blc.FcCatApprove.rfcExecute(FcCatApprove.java:307)
at com.sap.xss.hr.cat.approve.blc.FcCatApprove.init(FcCatApprove.java:276)
at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApprove.init(InternalFcCatApprove.java:243)
at com.sap.xss.hr.cat.approve.blc.FcCatApproveInterface.onInit(FcCatApproveInterface.java:136)
at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface.onInit(InternalFcCatApproveInterface.java:133)
In spro I have configured
Approval Mode MSS_LTV_EE
CATS Approval MSS_LCA_EE
Request Mode ESS_LEA_EE
Team View Mode MSS_LTV_EE
I have added pernr and name in the fields selection
Following is the st22 dump
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
Regards
Srini

Srini,
This thread might be handy.
ESS, Employee Search error: The ASSERT condition was violated
Good Luck.
Sandeep Tudumu

Approve Time Sheet data

Hi friends,
I am getting problem when trying to "Approve Time Sheet data " from MSS. I am not using Work flow but the link given in MSS Team. When i am clicking on the link the first page is comming and i can see the requested working time for approval. But when i click on the review an error occured. the details is:
Exception condition "NOT_FOUND" raised., error key: RFC_ERROR_SYSTEM_FAILURE
From R3 by ST22 i checked the error. Its like...
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Exception CX_SY_REF_IS_INITIAL
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_MSS_CAT_APPR_APPLICATION===CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
I can approve the working time from R3 by cats_appr_lite transaction.
Please help.
Thanks,
Sekhar

Hi Mani,
It is a good thing you have found this post, as it demonstrates that you put in some effort to search for similar posts to your problem.
However, if the post you found is like 3 years old and there are no replies, chances are the guy did not find a solution or isn't visiting here anymore. So it might be a good idea to raise a new post, to increase you chances of getting some answers.

Review approved time sheets in MSS

Hello to everybody
We are working on a ESS/MSS implementation (ECC6.00 with EhP4), including CATS regular scenarios.
In MSS the "Approve Time" scenario displays all Time sheets submitted by the employees.
After the approval, the manager is no more able to see the approved time sheets.
Is there any scenarios in MSS, where the manager can review the approved time sheets?
Where can he see the history of approved time sheets?
many thanks
katia

Hi Katia
I think the main ways to get this would be
1) Absence Days iview MSS
2) Attendance overview MSS
3) Team Calendar MSS
4) Reporting (ECC, CAT-TS or MSS)
5) Prior to approval in the UWL work item
6) Prior to approval captured in Review step of Timesheet approval iview
7) CA-TS transactions in ECC
Similiarly please also check in UWL after approval to see if work item and associated timesheet is visible
Best wishes
Stuart

How do I get approved for Sam's Club Credit?

Anyone know if Sam's Club credit card is harder to get for some reason? I can't seem to get approved for it. I applied in May, are they strict when it comes to extending credit? There's a new Sam's club opening up in the town I live in and want to shop there, but not necesarily use my credit cards / cash for it.

BigDaddy63 wrote:
Taoron wrote:
Anyone know if Sam's Club credit card is harder to get for some reason? I can't seem to get approved for it. I applied in May, are they strict when it comes to extending credit? There's a new Sam's club opening up in the town I live in and want to shop there, but not necesarily use my credit cards / cash for it. Don't know why you haven't qualified; if anything you should be eligible for the MC version. I qualified for the store card, but hope it will be upgraded to MC in the future. First time I applied, didn't know that I needed to call in for verification because the application page had 7-10 day message and nothing else, so when I got denial letter, I called in and they said they couldn't verify my identity and told me I could reapply in 30 days and I might have to go through verification process which I did. Also when I reapplied, the old app was still in the system and I had 2 showing. His TU fico is showing 642...am i missing something? I thought to get MC version you had to be in 700s?

Employee Search in MSS Approve Time Sheet Data

Employee Search in MSS Approve Time Sheet Data (Net Weaver Portal 2004s)
In MSS we need upper level managers to be able to approve time for employees who reside in lower level org units and are not the managers direct reports. This is usually the case when the chief the employees do report to directly is absent.
In the MSS Team view the links General Information, Compensation Information and Personnel Development have an Employee Search iView with a dropdown containing options for Direct Reports, Employees from Organizational Structure, Employees from Organizational Units and Employee Search. We have been told that in previous versions of MSS that functionality existed in the Approve Time Sheet Data iView as well which would appear to solve our problem.
Is this functionality available in Approve Time Sheet Data and if so how is it configured? Or is there another way (other than manipulating the org structure) for managers to view non-direct reports and approve their time?

Hi Mani,
It is a good thing you have found this post, as it demonstrates that you put in some effort to search for similar posts to your problem.
However, if the post you found is like 3 years old and there are no replies, chances are the guy did not find a solution or isn't visiting here anymore. So it might be a good idea to raise a new post, to increase you chances of getting some answers.

ESS - Record Working Time Error Display and Approved Time in Calendar doesn't update color

Hi Experts,
We are using EHP7/NWBC. On ESS under Record Working Time when an employee enter time, system error message displayed on screen. Even through the message appears, employee able to submit time and manager can approve it.
We would like to know, how to remove this error message. We tried through clearing error log but when employee logs back in, it again appears.
And also, when Manager approves time, for the approved data Calendar doesn't get updated and employee don't have details that manager approved or not.
Appreciate your response to resolve these two issues.
Error Message Screenshot:
Thanks,
Ashish

http://scn.sap.com/thread/3346594 http://scn.sap.com/thread/2135503

HOW CAN I GET THE TIME IN EXCEL SHEET USING WRITE TO MEASUREMENT INSTRUCTION

HI, I am using GET TIME IN SECONDS ,and after that i placed SECONDS TO DATE /TIME instruction ,and i had taken a write to measurement file instruction
to get the time in excel sheet. Now i am not able to connect write to measurement source to seconds to date and time output . Is there any solution.
I am attaching my VI file also.
Attachments:
TEST.vi ‏43 KB

Hi
Im using Labview 8.2. Currently it just shows the data without the time. Im not sure what to do. It works perfectly though. I just want the time to appear on my notepad along with my data
holla
Attachments:
Testing1.txt ‏1 KB
Untitled 231_LV80.vi ‏23 KB

How do i get face time to work on i phone 4?

How do i get face time to work on my i phone? step by step instructions please
How do i get my photos from i phone 4 to display on my TV? as advertised on the television.
Thanks

The manual will tell you:
iPhone User Guide (For iOS 4.2 and 4.3 Software)

How to get System time during report generation?

Hi,
I am developing a template in which I am required to show data of current year only. Is there any method by which I can get system time(from which I will extract year) ?

Thanks,
I already have found it on page 260 of oracle bi publisher guide.
sysdate() <?xdofx:sysdate()?> SYSDATE returns the current date and time.
The datatype of the returned value is DATE.
The function requires no arguments.

How to get system time from cRIO?

Hello,
I have an NI cRIO-9076 chassis with an NI-9467 GPS module and an NI-9234 module.
I've downloaded the FPGA Timekeeper application which synchronises the FPGA clock to the 1PPS GPS, this works well. What I want to do is create a trigger that at a pre-defined HH:MMS the system will start to acquire and log data from the Accelerometers connected to the NI-9234 module.
I have added the controls for the entry of the HH:MMS and calculated the time in seconds. I would like to compare the system clock once it is locked to the entered timestamp and then trigger.
As I only have a value that represents seconds in the day I need to calculate the offset from EPOCH to compare against the GPS time reference. I have read that the NI system clock runs from 01/01/1904 instead of the EPOCH 01/01/1970.
The question is how do I get the current system time so that I can compare it against the entered time? I only need seconds in the day = (HH * 3600) + (MM * 60) + (SS)
Thank you,
Kind Regards,
Simon

You should use the Get Date/Time in Seconds VI which will return a timestamp. You can then format this timestamp using the Format Date/Time String to give you exactly the time format that you need. Then you can extract the numbers you need and do your math.
www.movimed.com - Custom Imaging Solutions
Attachments:
Get Seconds in Day.vi ‏9 KB

How do I get a time value in days, hours and minutes returned to a cell from a calculation of distance divided by speed?

How do I get a time value in days, hours and minutes returned to a cell from a calculation of distance divided by speed?

Simon,
you can use the duration function:
B4=DURATION(0,0,B1/B2)
you can further, format the cell as a duration like this using the cell inspector:

How do I get Quick Time to work on my computer again?

Apparently I am old and a dummy and it seems I accidentally uninstalled Quick Time from my computer instead of uninstalling something else that I was intending to uninstall. How can I get Quick Time back? I've tried the download from the apple.com site, but it never shows up in a file other than some binary file and I don't have the option to "run" after download, just save to this binary file. PLEASE can someone help me? THANKS in advance for any and all help.

Hi 1 olddummy,
Welcome to the Support Communities! First of all, you are not old or a dummy. I'm sure you can give me hundreds of examples of things you can do because of your knowledge and experience, so give yourself a break . I just want to clarify .... are you using a Windows computer or a Mac? I'm going to assume Windows and include an article for you that will explain how to delete the iTunes application and all of it's components (because Quicktime is tied to this program). This will not affect your iTunes library, only the application itself. Once that is done, you should be able to work with Quicktime again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Cheers,
- Judy

Get approval time

Similar Messages

Maybe you are looking for