Get complete name and surname with the username id

Hi guys!!
How can I get the complete name and surname of an user SAP?
(transactions, tables, ....)
Thanks a lot.
Best regards
Ana

Hello,
The best way to get this data is through the BAPI:
DATA: l_s_address TYPE bapiaddr3,
      it_return   TYPE STANDARD TABLE OF bapiret2.
* Getting the First & Last name of the user
CALL FUNCTION 'BAPI_USER_GET_DETAIL'
  EXPORTING
    username = is_vpheader-fi_usnam
  IMPORTING
    address  = l_s_address
  TABLES
    return   = it_return.
* No need to check SY-SUBRC as the FM will never raise an Exception.
CONCATENATE l_s_address-firstname
            l_s_address-lastname
      INTO  v_name_person
      SEPARATED BY space.
Anyways just to let you know, these details can be obtained from ADRP.
BR,
Suhas

Similar Messages

  • In which table can I find the name and surname  for a username ?

    Hello,
    I search the table with the master data of users. Specially I search the table where I can find the
    name, surname for a user.
    In which table can I find the name and surname  for a username ?
    Thanx in Advance

    Hello  everybody,
    thank you for the helpful informations.
    thank you very much
    with kind regards
    cetoman

  • When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

    When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

    Hello Gemese,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • My MacBook Pro's battery is completely dead and even with the power chord attached it doesn't turn on. Any solution ?

    I read somewhere that even with the drained out battery the mac should work with power chord attached. In my MacBook Pro 8.1 (late 2011) the green battery indicater on the side of the laptop just blinks depicting that the battery is dead. But the mac is not turning on even when the power chord is attached. I don't mind working with the power chord all the time but at least the MacBook should turn on. When I press the power button I hear nothing, I see nothing , there is no change. It's just a dead laptop. I am worried. Is there something else wrong with my MacBook Pro

    Ok...I'd be tempted to try another charger if you have access to one. If not, I'd book a Genius appointment at your nearest Apple Store & get them to take a look for you.
    Good luck.
    Ben

  • Truly dumb question. How do I get PS to actually complete a command, eg straighten an horizon, and finalise the change. Even doing a "save as" with a new file name and reloading brings the image back, straightened, but with the skewed back ground frame st

    Truly dumb question. How do I get PS to actually complete a command, eg straighten an horizon, and finalise the change. Even doing a "save as" with a new file name and reloading brings the image back, straightened, but with the skewed back ground frame still there. Is there a "apply change" or similiar command that I simply cannot see.

    brings the image back, straightened, but with the skewed back ground frame
    PSE did what you told it to do. Choose the Straighten and crop edges or fill edges options when you use the straighten tool if you want it to do more than just straighten the contents of the image. Many people prefer the plain straighten because they'd rather crop themselves than let PSE do it.

  • Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

    Hi Apple community!
    I have a [rather worrying] problem.
    When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
    " The operation can’t be completed because an item with the name “.DS_Store” already exists. "
    I am not given an option to skip this file or anything else.
    But I simply cannot complete the operation!
    I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
    but no success.
    The same thing keeps happening.
    At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
    but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
    So effectively, it seems I cannot backup my files anywhere!
    Any help or advice would be greatly appreciated.
    Thank you.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Getting error while creating a new web app saying "The password supplied with the username domainname\username was not correct. Verify that it was entered correctly and try again"

    Hi ,
    I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username  was not correct. Verify that it was entered correctly and try again".
    I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
    What should i do ??
    Thanks in advance.
    Regards, Anurag

    HI,
    right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
    http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
    let us know your result
    Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer

  • Error message "The operation can't be completed because an item with the name .DS_Store already exists"

    Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message  "The operation can't be completed because an item with the name .DS_Store already exists".
    The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
    All file types are susceptible
    the HDs are all Mac OS X formatted, no foreign file formats involved
    the HDs are all journal-enabled, OS X extended formats
    have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
    any ideas anyone?
    would appreciate any thoughts or sugestions, this has got me beat
    the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
    many thanks for any suggestions

    This is definitively a nuisance. When copying large amounts of files between volumes  try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
    gunnars-mac-mini-i7:Volumes gunnar$ man ditto
    NAME
         ditto -- copy directory hierarchies, create and extract archives
    SYNOPSIS
         ditto [-v] [-V] [-X] [<options>] src ... dst_directory
         ditto [-v] [-V] [<options>] src_file dst_file
         ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
         ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
         ditto -h | --help

  • The operation could not be completed because an item with the name xyz already exists

    I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
    however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
    I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
    anyone know the cause, or at least a fix?

    If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
    Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
    For some other possible solutions, see:
    operation can't be completed because an...: Apple Support Communities

  • HT4528 My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon.  I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem,  The backup finished the RESTORE would fail c

    My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon.  I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem,  The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
    I have plenty of space available on the iphone,
    8gb free,
    ios version- 6.1.3 ( 10B329)
    carrier - Verizon 14.0
    Modem Firmware - 3.0.04
    Can someone help.
    I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
    computer osx is 10.5.8
    itunes version 10.
    I do not wish to go to ios 7 at this time.

    Settings > General > Reset > Reset Network Settings.
    Basic troubleshooting is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If the issue continues, contact the carrier to troubleshoot the network connectivity issues.

  • Problem with copying to external drives 10.8.3 "the operation can't be completed because an item with the name .ds_store exists"

    After upgrading from 10.7.5 to 10.8.3 I cannot copy certain folders to any external drive. the operation can't be completed because an item with the name .ds_store exists. I have seen this problem in discussions for many years with no real solution. Does anyone have a resolution? Please help. This is very frustrating as I work in two locations and copy folders back in forth all the time.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

    I am having problems  saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
    The document could not be saved. The server said:
    “The operation failed because an unexpected error occurred. (Result code 0×80020005)”
    Please ensure you have completed all required properties with the correct information and try again.
    I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
    Adobe Acrobat version 10.1.13
    SharePoint 2010

    Hi quodd,,
    We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
    1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
    2. How are you opening and saving the PDF, the exact workflow?
         Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
    3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
    4. Please verify that columns name do not contain spaces or some other special characters.
       Can you try to save PDF to library with Custom template and just a single managed metadata column  with a simple name
    Thanks,
    Nikhil Gupta

  • I have signed to up to iCloud and am pretty sure that all of my settings are turned on appropriately. However I get syncing from iCloud to my Mac and to my iPhone, but I am unable to get my iPhone to sync with the iCloud and most obviously calendar events

    I have signed to up to iCloud and am pretty sure that all of my settings are turned on appropriately. However I get syncing from iCloud to my iMac and to my iPhone, but I am unable to get my iPhone to sync with the iCloud and most obviously calendar events, so that if adding an event on my iPone it never appears on my other hardware? Can anyone help me sort this out?

    Re: check that the appointments in my phone are going into iCloud calendars....exactly how do I do this?  I fear this is a really stupid question!
    My iCloud account is set up with my Apple ID as one email account (for example [email protected]) which is the email account I use to sign up for internet sites like Amazon, Apple,etc, so that I can differentiate vendors/mass emails.  But my default calendar on my iPhone is in a different email name (ie [email protected]) which I use for most communications to friends, relatives, etc. and it is this account that holds most of my appointments.  To further complicate things I have other email accounts that I use for business/professional and community work.  If I want all my calendars to show on my iPhone AND sync to my iCloud, do I set this at the phone level or the iCloud level?  or both?   
    Let me clarify....It looks like if I go into appointments that I previously set up through my personal account (ie above [email protected]) and edit the entry on my iPhone, selecting the iCloud "home" calendar within the entry, it will then sync to my iCloud account, no problem....do I have to do this to EVERY entry I have? or is there  a way to name my personal account as one to sync to iCloud?

  • How to pass username and password with the portal url

    i want to access portal from my web site. i have created username and password fields in my web page. when submited , my portal page should open. so how to pass username and password with the portal url.

    This is not straightforward; but it is doable.
    First tell us about your portal version; portal 10.1.4 has a slightly different method of doing it and the pre-10g portals were completely different animals.
    And if you are in AS Rel 2, then the most important document for you would probably be the following:
    [Creating Deployment Specific Pages| http://download-west.oracle.com/docs/cd/B14099_19/idmanage.1012/b14078/custom.htm#i1015535]
    You might want to use it in conjunction with some metalink notes about your portal version and such a login page.
    hope that helps!
    AMN

  • This is how I am supposed to contact to have my annual creative cloud membership refunded?  I cancelled immediately upon seeing the charge and followed the instructions given and wound up here.  Am I supposed to share my username and password with the for

    This is how I am supposed to contact to have my annual creative cloud membership refunded?  I cancelled immediately upon seeing the charge and followed the instructions given and wound up here.  Am I supposed to share my username and password with the forum?  Adobe, I am about to go social with my frustrations!

    No, this is a public forum, as in user-to-user, so you should not share any private information here.  You will need to contact Adobe Support by chat or phone, which is apparently getting harder and harder to do.  Use the link below and choose the Still Need Help? option at the bottom in the blue area - in the section that opens take your pick of chat or phone.
    Contact Customer Care

Maybe you are looking for