Get data source schema - List tables has failed

Hi, I am trying to expose tables from a SQL Azure Database to OData feed on power bi's data source setting and I got the following alert:
Get data source schema - List tables and views has failed. Please check Windows Event Log for Gateway Instance (InstanceName1) errors.
Thanks in advance.

Hi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue.
In the meantime please have a check on the below link and check if it helps.
http://whitepages.unlimitedviz.com/2013/09/power-bi-working-with-the-data-management-gateway/
https://support.office.com/en-us/article/Create-a-Data-Source-and-Enable-OData-Feed-in-Power-BI-Admin-Center-9dbd3091-8961-4564-adf6-2a3aeff0b2b4?ui=en-US&rs=en-US&ad=US
Regards,
Mekh.

Similar Messages

I want to get data from only RESB table without loss of any deltas

i have to fetch the reservation details for the production orders.
we are using descrete manufacturing method to keep track the Work in process and cost .
for addition of components manually in the production order we can track thru change date i.e From AUFK table with field name AEDAT. for each time when we are adding the components the system will create a new line item In tableRESB-OBJNR(field)
i need very few fields from RESB table to be pulled into SAP BW.
how should i proceed creating a generic exractor without any loss of deltas.
i want to get data from only resb table into sap bw.
how should i proceed with Generice extractor with single table RESB and what would be the delta field . could any one throw some light .
all answers would be rewarded with points

I have few reports for BOM data is to be pull into bw
all the reports contain the same tables Mentione below
MAST- material to BOM LINK
STKO- BOM header
STPO- BOM ITEM
STAS- BOM ITEM SELECTION
how should i create ageneric datsource satisfying that all the data comes from these tables without fail of deltas,
my doubts.1. Do i have to create a separate data sources (generic) for all these individually and load into separate ODS'S AND CLUB THEM into single ODS further.?
if i create i dont know what should be delta field that has to be picked for each datasource
2. Do i have to create a view on all these tables and create a generic datasource.if created what would be the delta field i have to select.
could you pls let me know how should i pull the data without loosing any deltas
could you pls let me know the flow with delta fields mentioned
regards,
P

How to get data from subsites list of SharePoint 2010 in ssrs

Hi,
Can someone help me on this issue.
I want to create a report using ssrs, I have some of the data in SQL and some of the data in sharepoint list.
First I need to go to SQL and get the data from the table which contains URL for the subsite in sharepoint.
after that I need to go to all the subsites and go to perticulat list in the subsites and get data from that list.
for example, their is a top level site "abc"
it contains sub site "123", "456","567", etc.. All this sub sites contain a list by name "Sample List", Now I need to go to that sub site list(Sample List) and get list-item column say "created By" which
is created on particular date.
in my report, I need to print the sub site "url/Title" which comes from SQL database and list-item column "Created By" of that sub site list "Sample List".
I tried using subreport inside a report by using "Microsoft SharePoint List" as a datasource, but when it comes to real time we don't know how many subsites will be created, so we can't create a datasource for each subsite site.
I guess we need to be using XML as a datasource, but how can we go to particular subsite in query while using XML, since all subsites have list with the same name ?
I appreciate your help.
Thank you,
Kishore

Hi Kishore,
SQL Server Reporting Services(SSRS) supports expression-based connection strings. This will help us to achieve the goal you mentioned in this case:
Create a new report
Create a Data Source in the report with the connection string like this:
http://server/_vti_bin/lists.asmx (We use static connection string instead of expression-based connection string now, as it is not supported to get fields based on expression-based connection string in design time. We will change it to be expression-based
connection string later)
Create the data set(as you have done using XML query language). Please use list name instead of GUID in the listName parameter.
Design the report(e.g. Add controls to the report)
Now, let's change the connection string to be expression-based. First, please add a parameter to the report, move this parameter to top. This parameter is used to store the sub site name.
Open the Data Source editor, set the connection string to be: ="http://server/" & Parameters!parameterCreatedInStep5.value & "_vti_bin/lists.asmx"
In the main report, pass the sub site name to the report we created above via the parameter created in step5
That is all.
Anyway, this is actually a SQL Server Reporting Service(SSRS) question. You can get better support on this question from:
http://social.technet.microsoft.com/Forums/en/sqlreportingservices/threads
For more information about Expression-Based connection string, please see:
http://msdn.microsoft.com/en-us/library/ms156450.aspx#Expressions
If there is anything unclear, please feel free to ask.
Thanks,
Jinchun Chen
Jin Chen - MSFT

903/902/BC4J can't get data-sources.xml conn pooling to work in production; help

I have several BC4J ears deployed to a 903 instance of OC4J being configured as a standalone
instance. I've had this problem since I started deploying in development on 902. So it's
some basic problem that I've not mastered.
I can't get data-sources.xml managed connection pooling to actually pool conn's. I'm wanting
to declare my jndi jdbc source connection pool in j2ee/home/config/data-sources.xml.
Have all BC4J apps get conns from this JNDI JDBC pool. I've removed all data-sources.xml from my BC4J ears,
and published the jndi jdbc source in my oc4j common data-sources.xml. I've tested that this is
the place controlling the conn URL/login passwd by commenting it out of config/data-sources.xml
and my BC4J apps then throw exceptions, can't get conn.
I've set the oc4j startup cmd line with the BC4J property to enabled connection pooling:
-Djbo.doconnectionpooling=true
symptom
Connections are created and closed. Instead of being put back into the pool managed by oc4j,
what ever BC4J is doing or my data-sources.xml is doing, the connections are just being created and
closed.
I can verify this via (solaris) lsof and netstat, where I see my oc4j instance under test load
with only 1 or 2 conns to the db box, and the ephemeral port is tumbling, meaning a new socket is
being opened for each conn. ;( grrrrrrr
Does anyone have a clue as to why this is happening?
Thanks, curt
my data-sources.xml
<data-sources>
     <data-source
        class="com.evermind.sql.DriverManagerDataSource"
        connection-driver="oracle.jdbc.driver.OracleDriver"
        ejb-location="jdbc/DEVDS"
        location="jdbc/DEVCoreDS"
        name="DEVDS"
        password="j2train"
        pooled-location="jdbc/DEVPooledDS"
        url="jdbc:oracle:thin:@10.2.1.30:1521:GDOC"
        username="jscribe"
        xa-location="jdbc/xa/DEVXADS"
        inactivity-timeout="300"
        max-connections="50"
        min-connections="40"
    />
</data-sources>

I've run another test using local data-source.xml, that's packaged in the .ear. Still
pooling under BC4J doesn't work??
A piece of info is that the 903 oc4j release notes states that global conn pooling doesn't
work. Infering that the j2ee/home/config/data-sources.xml data sources aren't pooled or ??
I just tested so called local connection pooling, where I edited the data-sources.xml that
gets packaged in the ear, to include the min/max params and re-ran my test.
Still, the AM creates a new conn, it's to a new socket, and closes the conn when done. Causing
each conn to not be pooled, rather opened then closed to the DB box. As verified with lsof and
netstat, checking the ephemeral port # on the DB box side, always changes, meaning it's a
new socket and not an old pooled conn socket.
???? What the heck??
Surely if the AM conn check out / return code works properly, OC4J's pooling JDBC driver would
pool and not close the socket??
Has anywone gotten JDBC Datasource connections in BC4J to actually be pooled under OC4J??
Since I couldn't get this to work in my early 902 oc4j testing, and now can't get it to work
still under 903 OC4J, either it's my config or BC4J AM's code or OC4J?
Any thoughts on how to figure out what's not configed correctly or has a bug?
Thanks, curt

HT1349 When trying to run itunes on my PC, get this message. This application has failed to start because MSVCR80.dll was not found.

When trying to run itunes on my PC, I get this message. This application has failed to start because MSVCR80.dll was not found. Do you have any clues on a solution?

Welcome to Apple Support Communities
A solution is listed in the thread below.
It probably and other similar discussions appear in the More Like This window to the right of your question. The ones with a green check mark are questioned marked 'answered' by the original poster.
https://discussions.apple.com/message/24610401#24610401

Data source schema validation error

Hi,
I'm trying to validate data source schema in TS 3.1 and getting this error:
" Run-time error '458':
Variable uses an Automation type not supported in Visual Basic ".
Same operation works fine in TS v3.0 (Evaluation!!!).
Thanks,
Edi

Wojtek and Edi -
I have looked into this problem and some preexisting VB code now appears to error when trying to access some of the data type information from the providers schema. I have been able to work around this error and if it occurs again, it will error more gracefully. I am attaching a ZIP file for you to try. Thank you for your patience.
Scott Richardson
National Instruments
Attachments:
TsDBOptions 31.zip ‏192 KB

How to get Data Source Name and Source System for InfoPackage

Hello Guys,
I'm creating a routine that can be use by any InfoPcakges...
how can I get the Source System and Data Source in a Routine?

Hi
Please check the table RSLDPIO,
In this table search with Info Package-->You will get Data source related to this info package
then goto RSDS >here search with Data source>you will get from which Source system this is extracting data
Hope this helps
Regards,
Venkatesh

Create a data source and database tables using WSAD

Hi, guys:
the following is from a tutorial:
http://www-106.ibm.com/developerworks/websphere/techjournal/0306_wosnick/wosnick.html
"To create the data source and Cloudscape database tables automatically, right click on the HelloWorldServer in the Servers view, and select the Create tables and data sources menu item. A dialog will then display showing that the data source and database tables were created successfully (Figure 5)."
I am using WSAD 5.0 trial version. I cannot find Create tables and data sources menu item if I right click on the HelloWorldServer in the Servers view. I am wondering if this is because trial version does not have this feature?
regards

This question is a little off topic but you may get a reply. Please note this forum is about Sun's J2EE SDK and its related technologies. You may have better luck posting your question to an IBM specific resource.

Fastest way to get data from Multiple lists across multiple site collections

HI
I need to get data from multiple lists which spread across 20 site collections and need to show it as list view.
I have searched on internet about this and got some info like options would be to use search core APIs or BCS . I can't use search because I want real time data. Not sure of any other ways.
if anybody can provide ideas it would be help.

Might LINQ be an option for you? Using
LINQPad and the
SharePoint Connector, you should be able to write a query that'll retrieve this data, from which you can tabulate it. I'm not sure how you'd be able to automate this any further so that it's then imported in as list.
For something more specific, I used a third party tool called the
Lightning Tools Lightning Conductor, which is essence a powerful content roll-up tool. In one of my solutions, I created a calculated column that gave an order / ranking on each item, so that when lists were combined, they'd still have some form of
order. The web part is also fairly customisable and has always proven a useful tool.
Hope that helps.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

The Data Quality Services license validation has failed.

Hello
Am Harsha here, Am getting some strange error on my MSSQL Server 2012 DataQualityServices, I have installed DQSinstaller and everything is working properly till yesterday, But today after i restart the Machine am not able to open DQS client its giving some
strange error like "The Data Quality Services license validation has failed." Please see the Screen shot below. Please let me know how to rectify this Issue.

After patching, the dqsinstaller.exe should be run to regenerate the SQL CLR procedures to refresh the version. Try this...
Launch Cmd as Administrator
cd "C:\Program Files\Microsoft SQL Server\MSSQL11.InstanceName\MSSQL\Binn"
DQSInstaller.exe -upgradedlls
Thanks, Jason
Didn't get enough help here? Submit a case with the Microsoft Customer Support team for deeper investigation - http://support.microsoft.com/select/default.aspx?target=assistance

Generic Data source on VBFA Table

Dear Experts,
I would liike beuild a generic data source on VBFA table. Here i want to have all the fields of the Table.
Now my questions are.
1.I want to a Delta Update to BW, on want fields I should choose Delta to get all the changed records as well as the newly created records.
2. Do I need to build the Data source using a Function module.
3.Along with this I have a requirement to get the Sales Org, Company Code, Maetrial group information. How can I achieve this ( from which all tables I can get this information).
4. What is the frequncy of the table VBFA update.
5. generally what would be the number of Records for a Delta Update to BW.
Your suggestions are appreciated.
Regards,
Ganesh Thota.
Moderator message: a topic for the BI forums, but please invest own research effort before asking there.
Edited by: Thomas Zloch on Jul 15, 2010 12:56 PM

Hi,
you need to create fm for the extraction as you have 2 delta relevant fields erdat and aedat to get the new and the changed records.
Siggi

I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.d11 was not found." I have uninstalled and reinstalled iTunes multiple times. Am running Windows XP Svc Pack 3. help

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753)

How to get data from an internal table in some other program

I would like to get data from the internal table in the other program. When I using FM "LIST_FROM_MEMORY" to get the data, it doesn't work and the exception is not fount.
If any special code need in the other program, like write data to memory .
Many thx .
From Ross Wang

Hi
<li>You need to have interaction if you want to use EXPORT/IMPORT statments.
<li>The internal tables in both programs must be same
<li>Program one ..Calling program
REPORT ZTEST_NOTEPAD.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SUBMIT ztest_notepad1 AND RETURN.
IMPORT it_t001 FROM MEMORY ID 'ZTEST_T100'.
LOOP AT it_t001.
    WRITE:/ it_t001.
ENDLOOP.
<li>Program two ...Called program
REPORT ztest_notepad1.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE it_t001 UP TO 10 ROWS.
IF sy-dbcnt > 1.
    EXPORT it_t001 TO MEMORY ID 'ZTEST_T100'.
ENDIF.
I hope that it gets you some idea.
Thanks
Venkat.O

Using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

Hi,
Based on your description, I have done a test and I can’t reproduce your issue.
I have used SharePoint Designer 2013 to open a SharePoint Online site and there are no issues.
I’d like to clarify whether you encounter any issues when accessing SharePoint Online sites. If there are no issues during the accessing procedure, SharePoint Online service should be working fine at your side. The issue may be caused by specific SharePoint
Designer client or network. I suggest you refer to the following steps to troubleshoot the issue.
1. Use SharePoint Designer to open another site and check whether it is successful.
2. When you are prompted to enter Office 365 account and password, try other users’ accounts and select the remembering the credential.
3. Perform the connection procedure under another environment and verify whether the issue is resolved.
If the issue persists, can you provide related screenshots for further troubleshooting?
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Get data source schema - List tables has failed

Similar Messages

Maybe you are looking for