Get instance into wf-steps

Hi Experts!
i look into 2 steps-WF,
each task connect with corresponding instance-public method of class (with interface if_workflow).
i complete my FIND_BY_LPOR and LPOR (as it's explained in Jocelyn Dart's blog)
so,the first step is executed without errors and filled internal table (=puplic attribute of class)
the second step returns empty table (i saw it through debugger)
i suppose that is another(or new) instance of my zclass.
should i get instance directly into wiobject_id and pass
into second task container via wf container ?
it works correctly ,
when i used WF with BO and i saw table in the second step.
Thanks for answers.

sorry Dell, no status for crystal instances, but webi does have status.
Get details of a report:
     GET        http://localhost:6405/biprws/infostore/5602
     This will also show a link to latest instance
To get instances (can’t get status)
     GET        http://localhost:6405/biprws/infostore/5602/children
To get instances that are PDF or Crystal formats (format is
same as SI_KIND)
     GET        http://localhost:6405/biprws/infostore/5602/children?type=Pdf
     GET        http://localhost:6405/biprws/infostore/5602/children?type=CrystalReport
Webi (raylight) has more details (including status):
     GET        http://localhost:6405/biprws/raylight/v1/documents/5487/schedules
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<schedules>
     <schedule>
                      <id>10336</id>
                      <name>Formatting Sample</name>
                      <format type="webi"/>
                      <status id="1">Completed</status>
                </schedule>
          </schedules>
Dan

Similar Messages

HT1363 My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.

My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes. I have the latest version of iTunes. Windows has all the most recent updates too. I can reset the iPod, but the message to Use iTunes to restore comes back and I am stuck.

Already tried another USB port, still nothing.
I don't have another PC to check, I only have one which is the one not working with my iPod.
It appears under my Computer, just not under iTunes. Plus, the iPod classic troubleshooting assistant doesn't work because I can't restore since it can't come up onto my iTunes! Even my iPod says "Use iTunes to Restore" once in a while, but I plug it in & I'm not able to restore it since it won't come up under iTunes.
Please help

I am new to IPhoto 9.5 and I think I missed a step. I uploaded pictures but they do not appear as an event in my library. They are in Last imported only. How can I get them into event.

I am new to IPhoto 9.51 and I think I missed a step when I uploaded my vacation pictures. I uploaded pictures but did not import them into the library. They are in L\last imported only. How can I get them into events?

If the Photos are under 'Last Import' or 'Last N Months' then they are in the Library somewhere, just not where you are expecting them to be. We know this as both Last Import and 'Last N Months' are not places, just listings of elements in the the Library.
The two most common reasons that they can't be found is either an incorrect date on the camera or the Sorting (View Menu -> Sort Photos - or Sort Events, as appropriate) has changed.
Quick route to find them: Right-click on one of the images in Last Import and select 'Show Event'. This will bring you to the image in the Library.

How to get instance notes in a global

I have a global in a utility project that gets called through PAPI WS from an external client.
I want this global to take an instance id as the input argument. It should then get a reference to the instance, get the instance notes currently associated with that instance and pass them back (as an array of delimited strings). The instance will be residing in one of many other projects.
I can use PAPI in the global to connect to a BusinessProcess:
connectTo bp
using url = Fuego.Server.directoryURL,
user = String(BusinessParameter.getValue(name : "GENIE_UID")),
password = String(BusinessParameter.getValue(name : "GENIE_PW")),
process = "/" + ou + "/" + process
and I can get a reference to the instance using bp.getInstance(), but I can not see anywhere in any of the PAPI methods where I can get the instance notes for that instance.
BTW I am using both ALBPM 5.5 and 6.0, so I need a solution for both.
Basically this external client wants to get instance notes for a given instance (and there is other processing I need to do as well - I need to add in custom notes from a custom table before I return the results, so they can't just use PAPI WS directly to get the instance notes).

I ran into this problem and requested from Product Management that they allow PBL code to get instance notes, audit info, etc. It's been a while since I've run into this problem but I'm sure it's the same issue. You can only get information about the instance notes, audit info, etc from PAPI.
The architecture of BPM is such that the BPM workspace actually uses PAPI to do all its work. So in other words anything the workspace does, PAPI can do. But from within a process, PBL code doesn't have access to all PAPI functionality. You may want to raise this issue up with product management and see if they have any recommendations.
BTW - It is not recommended to instrospect BPM tables to use from within your process. Although this would solve your problem, it is not recommended...
Cheers!
Mark

I am a CC subscriber and trying to update lr5.7 and I am told to got to my CC folder and click on install. The problem is, LR is not in my file. I guess I have been using my original lr that I bought years ago. What now? How do i get lr into the CC file?

I am a CC subscriber and trying to update lr5.7 and I am told to got to my CC folder and click on install. The problem is, LR is not in my file. I guess I have been using my original lr that I bought years ago. What now? How do i get lr into the CC file?

Gary116 please remove and reinstall Lightroom by following the steps listed in CC desktop lists applications as "Up to Date" when not installed. The version of Photoshop Lightroom available through the Creative Cloud Desktop application supports your Creative Cloud Membership.

Mangal Fonts and Tunga Fonts in (MS Home and Student 2010) Word 2010 not getting converted into PDF

Why do I get a totally blank PDF file whenever I try to convert any (Microsoft Office Home and Student 2010, Version: 14.0.6029.1000) Word document file containing either Mangal Fonts (Hindi) and Tunga Fonts (Kannada) into a PDF file (by using Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790 MB, Complete/Full Version) after formatting and reinstalling all the necessary software / softwares (Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3 and Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB)?
I'm using
01) Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3
02) Computer: Intel(R) Pentium(R) 4 CPU 3.00 GHz 3.00 GHz, 504 MB of RAM
03) Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB
04) Microsoft Office Home and Student 2010, Version: 14.0.6029.1000, Product ID: 82503-388-0792296-26607, Program File Size: 490 MB
05) Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790.00 MB, Complete/Full/All Version/Features has/have been installed
06) Windows Internet Explorer 8, Version: 20090308.140743, Program File Size: 4.20 MB
Any Word 2010 document file that has been converted into any PDF File unfortunately does not show either the Mangal (Hindi) Fonts or the Tunga (Kannada) Fonts.
The PDF file will unfortunately become/remain totally/fully/completely blank.
When I convert an Excel Workbook having the Tunga Fonts (Kannada) to/into a PDF File, some of the Tunga fonts in the PDF file are legible and some are unfortunately illegible (get superimposed / overwritten on each other).
Perhaps I may get the same result if I try to convert an Excel Workbook having the Mangal Fonts (Hindi) to/into a PDF File with some Mangal fonts being/becoming legible and the rest being/becoming illegible (getting superimposed / overwritten on each other).
Tanveer
Syed Tanveeruddin, Karnataka, India
Message was edited by: tanveerindian
Message was edited by: tanveerindian
Message was edited by: tanveerindian

My chronological sequence of steps to create a Word 2010 Document or an Excel 2010 Workbook:
I first create a Word Document File or an Excel Workbook File and save it by giving an appropriate file name.
Then I right click on the closed Word Document File or the Excel Workbook File in the file folder and convert it into a PDF by retaining the same/original file name.
The font list of Microsoft Word 2010 claims/says/states that both Mangal and Tunga are True Type fonts and also that these fonts will/would be used on both printer and screen.
In case if there is any text content in English in the beginning it will get converted into PDF only till/until either a Mangal(Hindi)/Tunga(Kannada) Font starts.
The remaining English text content does not get converted into/to PDF the moment a Mangal(Hindi)/Tunga(Kannada) Font starts. If the entire matter is purely (100 per cent) in English text it will fully / completely / totally get converted into a PDF file without any problem.
Message was edited by: tanveerindian

Hi, i purchased a 2 dvd digital set. i cant just download it straight to my ipad. they said i have to down load it to my i tunes, then can transfer to i pad. im not seeing how to click the files from my email, and get them into the i tunes acct... ugh.

hi, i purchased a 2 dvd digital set. i cant just download it straight to my ipad. they said i have to down load it to my i tunes, then can transfer to i pad. im not seeing how to click the files from my email, and get them into the i tunes acct... ugh.
i do not have a mac home pc. just a regular pc

I had the same problem after I gave my old iPad to my parents and tried to install Netflix. This is what you have to do: Open iTunes on your computer, the one you sync your iPad to. Then go to iTunes Store and search for and download Netflix app. After you download it, if your iPad is set to download new purchases it may start downloading on your iPad. If so, tap and hold to delete the app (because it is trying to install the new version on the iPad) Next step, go to the App Store on your iPad and find Netflix and it should say install since you already purchased it on the computer. Tap to install, and it will say the version is not compatible, tap to download a previous version. Click that and it will install the older version! One more thing, if and when you sync to your computer again it will say something like " Unable to install Netflix on your iPad" Just click the box to never remind you again, because it's trying to sync the newer Netflix app to your iPad, but it doesn't work so it displays the message. The old app will remain on the ipad. Hope this helps, good luck

Purchase Requisition Price "valuation Price" is not getting copied into PO

Hi MM Expert,
we are facing a problem with PO price not getting copied from PR, our Client dont want to maintain the Info record as material they are using is generic (general, not specific or special), so is there any way or configuration setting so the PR price get copied into PO
Please help me to come out from this issue
Thanks in advance
Priya

Hi,
Yes there is a way to fix this.
Please follow the steps below.
1) SPRO --> MM --> Purchasing --> Authorization Management --> Define Function Authorizations for Buyers
2) Maintain 01 function authorization or copy it to create a new one
3) Under General Parameters, Check Adopt PO Price.
4) If you would like PO to have reference objects as mandatory, uncheck W/o Reference Optional
5) Go to each buyers ID by SU01 --> Parameter. Enter EFB and enter the 2 codes that you defined in Step 2.
6) Log out then log back in
Now with that ID, when you create PR, under valuation, you have a new drop down button asking whether you would like to adopt the price in PO.
Hope this helps.

I cannot get back into my eprint account.

I cannot get back into my eprint account. It will not recognize my password and when I click on "Can't Remember Password" and go to the page where I need to enter my account email address it will not recognize it. It's the same email address that appears in the window of my new 8600. I run Windows XP. Any idea of how I can get back into my account?

Hello Edelmann,
You may want to try some of the steps I mentioned in another thread for someone with a similar issue:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/eprint-not-working-login-to-eprintcenter-not-w...
Hope this helps.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

What do I need to set in order for each instance of the step type in the sequence to act individually?

I'm not able to change parameters on one step without it changing the parameters on another instance of the step within the same sequence. Is there something in the step type properties that I need to set to change this?
For instance, I have created a custom step called "Battery PWR" that the user can insert into a sequence, hit the "edit" button, set a control in a GUI to 12V and hit an "Okay" button so that the post-step condition causes the power supply voltage to change. Then, later in the sequence I want the user to be able to insert the same custom step, hit the edit button, set the control to 0V and hit an "Okay" button so that the post-step conditition causes the power supply to go to 0V. The problem is, when the user edits one of the steps, it causes the other step to change to the same value.
I know that this has a simple fix, just can't seem to find it.

I answered my own question. I was reading and writing to a file global instead of the step parameters, so I was basically overwriting my variables each time I edited the step. I'm obviously a novice TestStand user.

Get instance status through RESTful SDK

I am working with a client who has integrated some BO 3.1 functionality into their application using the .NET SDK. I am evaluating their code because they are upgrading to BI4.1 and a lot of the code will have to be scrapped and rewritten because they are using classes that are no longer available in the 4.1 .NET SDK.
Ideally I'd like to rewrite the code using the RESTful web services. I can see how to get folders and reports, how to schedule reports, and most of the other functionality they'll need. However, I'm trying to figure out how to get a list of instances that belong to a report (Crystal or Webi) and the status of the instance (e.g., Success, Fail, Recurring, etc.) Is this capability available in the RESTful web services? If so, what is the request URI to get it?
Thanks!
-Dell

sorry Dell, no status for crystal instances, but webi does have status.
Get details of a report:
     GET        http://localhost:6405/biprws/infostore/5602
     This will also show a link to latest instance
To get instances (can’t get status)
     GET        http://localhost:6405/biprws/infostore/5602/children
To get instances that are PDF or Crystal formats (format is
same as SI_KIND)
     GET        http://localhost:6405/biprws/infostore/5602/children?type=Pdf
     GET        http://localhost:6405/biprws/infostore/5602/children?type=CrystalReport
Webi (raylight) has more details (including status):
     GET        http://localhost:6405/biprws/raylight/v1/documents/5487/schedules
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<schedules>
     <schedule>
                      <id>10336</id>
                      <name>Formatting Sample</name>
                      <format type="webi"/>
                      <status id="1">Completed</status>
                </schedule>
          </schedules>
Dan

Idoc not getting posted into XI

Hello Experts,
I am trying IDoc-XI-File senario...
I have configured, ALE on backend system. Configured IDX1 and IDX2 in XI system.
At sender the Idoc has been sent without any errors.
But when I check in XI using SXMB_MONI there are no messages. Idoc is not getting posted into XI.
Please suggest as I am struck at this point. I am using XI 7.0
Thanks
Suma

Hi,
Kindly verify the ALE steps that you have performed...
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
Step 6)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 7)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
Reward points if helpful...
PrasHaNt

TS3697 how to get photos into itunes

New to itunes want to know how you get photos from pc into itunes. step by step would be appreciated. ta

You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

I have downloaded an album from itunes using HughesNet Download Manager scheduled to download during the 2 am to 8 am download period. The album seems to have downloaded to my computer. I found the file in c:\downloads\. I cannot get it into itunes.

I have downloaded an album from itunes using HughesNet Download Manager scheduled to download during the 2 am to 8 am download period. The album seems to have downloaded to my computer. I found the file in c:\downloads\. I cannot get it into itunes. Can anyone please give me step-by-step instructions on how to use the downloaded file? I have tried to import it and drag and drop. PLEASE HELP. Thank you.

See my response to your other post.

Can't get back into os x after os 9 boot.

I've never booted into os 9 on my old imac g3, so I decided to try it. After i selected os 9 as the startup disk and restarted, it showed up as a floppy disk with a question mark installed. I guessed something isn't installed right. I don't really care about os 9 now, i'm just trying to get back into os 10.4 tiger. I've tried holding the option key during restart, and it only shows a refresh button, macintosh hd in the middle, and an arrow pointing toward the right. The refresh doesn't do anything, and the arrow takes me back to the floppy disk with the question mark. Can anybody help me boot back into os x??? Thanks.
-Aaron

Sometimes you can call Apple and get replacemebt disks reasonably with your Serial# handy!
Tough without a Tiger Disk, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: ** The volume (nameofvolume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), off the HD & use Disk Utility from there to Repair Permissions, reboot once more.

Get instance into wf-steps

Similar Messages

Maybe you are looking for