Get personalization settings for user

Hello!
Is there a way to read all user personalizations via API? There is a Link "Personalize" in the Portal GUI. Where are the settings stored for it? Can I get it by the role?
Thanks in advance,
Burkhardt

Hi Burkhardt,
> a way to read all user personalizations via API?
If I understand the question right, these are the personalizable properties of the PortalComponentProfile; see http://media.sdn.sap.com/html/submitted_docs/60_sp2_javadocs/runtime/com/sapportals/portal/prt/component/IPortalComponentProfile.html
If a property is personalizable, you can check with isPersonalizableProperty(java.lang.String key)
Hope it helps
Detlev

Similar Messages

How to get Unique calid for users with same name in multiple domain env..

I found we need to use "-k legacy" option for creating users in non-hosted setup..
I had two domains default as xxxx.com and the one that I created as yyyy.com
When I have users with same name in two of the domains as user1..
The calid for both of them is... user1 ....so they share the same calendar
When Im in valid SSO of yyyy.com I get the mail account for user1 as [email protected] .....but the calid .. common as user1
How I can get unique calid for users under two domains..
whether I need to set Hosted domain support...Then how the mailid's differ with out using hosted domain support..
And I need to login UWC without using @domain.com...
Help me on this...
Ashik

Do you have UWC and Cal configured at least for virtual domain support?
basically.. for discussion.. let's say you have three domains on your server.. 1st domain is the default domain. other 2 domains are virtual domains.
if all domains were created with mail and cal support (-S mail,cal).. you would use the following options when creating users:
1) for the default domain.. you must use the "-k legacy" option when adding users.
2) for the other two domains.. when you create the user.. do NOT use a "-k" option.
If you do not use the "-k" option.. it defaults to "hosted" which will cause the user's calid to be [email protected]
If you Do use the "-k legacy" option.. it will create the calid as just "userid"
With regard to logging into UWC without the @domain.com part of a username in a hosted domain.. the easiest way to avoid this.. is to point a host name under the hosted domain to the server.
if you point webmail.xxxx.com to the server... and then access it via:
http://webmail.xxxx.com/uwc/
any users in the xxxx.com hosted domain will NOT need to use @xxxx.com when logging in... they can just use "userid"
This feature does not take any special configuration (aside from adding a DNS entry for the hosted domain)
Hopefully that helps.

Settings for USER MASTER in PRINTING?

In The tcode : CO02 for Prod Order , I specify under menu path : Order-settings-listcontrol-for Lp01 printer : 0909 . In the user master record the printer SPLD is 7205. I want that the printer setting on the screen ( 0909 ) should override the settings for user. So , I went to tcode opk8 and in the Print COntrol -> selected output device = 2 ( 1 is for user , 3 is for print control ) . I tried to print the form riding the user master setting , but it is not working . WHen i go and check the Print Determination : I see that it populates the print control from User master only ?
Any idea how can i override this setting ?
note : this List Control calls a Zprogram that calls a Smartform .

Hi Divya,
you can use tcode opk8 to create new entries under : Refernce Order Types -> Print Programs and can specify your driver prog name there which will call your smartform .
You can also do setting for each List Type you create in : the : Spool Parameter for user . there you can specify properties of list based on : User name or on the Plant level .
In the driver program i did something like this :
read table caufvd_tab index 1.
case caufvd_tab-werks.
    when '7200'.
      i_formname = 'ZSF_OBJECT_LIST'.
    when '9200'.
      i_formname = 'ZSF_OBJECT_LIST'.
    when others.
      i_formname = 'ZSF_OBJECT_LIST'.
endcase.
Hope this helps . If you have any queries let me know .
Thanks
Message was edited by: SAP BEE

How to make default personalization options for users

Hi all,
How can I make default personalization options for users, so that those will the default options when the user opens the portal BSP applications. Those will be the standard, at later point of time if they want they can personlalize some other fields, but earlier fields will be the default fields and user cant be able to change them.
Thanks
Murthy

Hi Murthy,
If you use IMG (crmc_blueprint_c) to customize PCUI appl than you can use the personalization feature. If you select 'Not in List' in the IMG for the field in the fieldgroup structure, than this field by default will not be viewable in the List View and will not be checked as 'Visible' in the Personilzation link. So by not selecting 'Not in List' you are giving that field to be viewable and all other fields are available for users to personalize by default.
If you have maintained the 'List View' using the CRM Designer, than most likely you would lose the above feature, as SAP Standard code considers the CRM Designer as high level of customization.
Thanks
Harsh

Query security settings for users

Hi again.
I'm looking for a way of querying security settings for a user.
ie I understand that company/division etc security is implemented through responsibilities.
In which case, is there a way to retrieve those exclusions per user?
(eg User 1 cant see company 50)
Thanks,
g.

Hi again.
I'm looking for a way of querying security settings for a user.
ie I understand that company/division etc security is implemented through responsibilities.
In which case, is there a way to retrieve those exclusions per user?
(eg User 1 cant see company 50)
Thanks,
g.

Changing settings for users

I have locked down some (most of the users and do not allow them to set 'General Settings' for instance.
I now want to set some settings for them like 'Screen Locking' .... and there is no GUI in SAP where I can set this for other users (as manager).
However, these settings are in OUSR and it would be rather easy to use SQL to set the required data.
Is it 'common practice' to do this this way or is there any objection?
Thanks
Franz

Hi Franz
SAP will not support any database, which is inconsistent, due to
SQL-Queries, which modify datasets or the datastructure of the SAP
Business One Database. This includes any update-, delete- or
drop-statements executed via SQL-Server Tools or via the the query
interface of SAP Business One.
This is stated in the support contract between SAP and the SAP Business
Partner also.
You can check SAP Note 896891 which also stated that.
Regards,
Syn Qin
SAP Business One Forums Team

How to get standard settings for instant messaging...

I'm using nokia 3120 classic. It have IMs but i can't chat Yahoo. Please guide me for details to getting standard settings internet. Thanks so much!

how can i get INSTANT MESSAGING SETTING.

Client Settings for Device collections Vs Client Settings for User collections

I noticed there are "Client Settings" set for each User and Group in SCCM. I want all my "Client Settings" configured by Device Collections not User Collections, what can I do? Can someone explain the difference between those?
Thanks
James A+, Network+, MCP

One is for user settings on a client and the other is for device settings on a client. As you can imagine user settings can only be deployed to user collections and device settings can only be deployed to device collections.
For more information about the user and device settings see:
https://technet.microsoft.com/en-us/library/gg682067.aspx?f=255&MSPPError=-2147217396
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Were do I get the settings for call forward, wait and block

I've look through my phone read the manual but still I can't find it. I've even done a search for it but still can't find it on the phone. If any body can assist on were to find these settings for a blackberry tourch 9850 Os 7.1
Solved!
Go to Solution.

Try this:
http://docs.blackberry.com/en/smartphone_users/deliverables/38346/Add_change_delete_call_forwarding_...
It explained it well enough to me that it may be helpful to you.

'Mass maintainence ' of Plug-in settings for users in cFolders

Hi All
In cFolders under settings---> General , we have a checkbox for Plug-in.
Can the cFolders admin enable the plug-in for all the users in cfolders through some mass maintainence transaction?
Pls. let me know, if you have any inputs on this.
warm regards
Kedar

The user administration settings will help you only for the new users. for the old users try this piece of code.
DATA lp_setting TYPE REF TO cl_cfx_settings.
DATA lt_filename TYPE cfx_tt_string.
DATA l_filename TYPE string.
DATA l_value TYPE string.
CALL METHOD cl_cfx_settings_doc=>get_folder_entries
EXPORTING
    i_folder_name = 'User Settings'
IMPORTING
    et_file_name = lt_filename.
LOOP AT lt_filename INTO l_filename.
CREATE OBJECT lp_setting
    EXPORTING
      i_name        = l_filename
      i_folder_name = 'User Settings'.
l_value = lp_setting->get_setting(
        i_key = 'UseEditPlugins'
        i_default = '' ).
WRITE:/ 'FileName',l_filename,'-:Value:->', l_value .
ENDLOOP.
call method set_setting instead of get to set the value to true.

Person settings for user, F4 help

Hi experts!
In the GUI the users can make 'person settings', regarding Max. number of hits to be displayed . This is done by using: Help->settings-> F4 help, in the GUI.
Can this be done from the WEB-side. Many of our users does not have access to the SRM through SAP LOGON. They have only access to the WEB. This is why they can't make the settings on there own in the GUI. Is the settings possible to make for the users through the WEB?
Can anyone help me?
Best regards Kim

Hi
I havenot tried but this is Not possible using WEB. The user need to login in sAP GUI for that user and then make the personalization himself.
Regards
- Atul

I recently changed my apple id and I acan not change the apple id on my iphone 4. I am trying to change the settings for user name on the icloud setting on my phone and it will not let me change. Can someone please help me? I appreciate it.

It only has gray letters when I try to change my apple id iin my icloud user settings. How can I change my apple id to my new email address and password? My old one was hacked.

Yes, but if you delete the iCloud account and start again, don't you have to wait 90 days for everything to start syncing?? I've been having this problem for months and no one seems to be able to figure it out. I used to have one Apple ID (which was not an email address) and then when iOS came along....and iCloud, they force you to use your email address as ID ....which actually sets up a SECOND Apple ID. I have a Mac, iPad, iPod touch and iPhone. the Apple techs tried to delete the iCloud accounts so that they all said the same thing (email address ID) but then I had to wait 90 days. the 90 days just passed and nothing is automatically syncing yet. I still think there are 2 accounts but if I delete all again.....it's going to be another 90 days (for security reasons, I was told). This is a real pain in the butt.

Firefox Settings for users in a Windows Server 2008/Win 7 Environment

I am currently building images of Windows 7 with Firefox 4 for use on our machines. We use Windows Server 2008 to apply user settings. I am looking for a way that I can provide bookmarks, change some of the default settings, and remove the start-up splash screens for Firefox. It turns out that each time a unique user logs into a computer, they have to walk through these splash screens, and the settings revert back to defaults, and the bookmarks are gone. We have several thousand users on our network, so any help fixing this issue would be appreciated.

Generally it is the browser service that populates network neighborhood. This technology is no longer used with newer OS like server 2008, windows 7/8.
Description of the Microsoft Computer Browser Service
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Getting error message for "user created how tos" CS3

I tried to create some new How Tos in CS3 and recieved the following error message when I try to open it:
"The Adobe Help application could not load a URL because the specified file could not be found. You may need to re-install the application and the help component."
If I access one of the ones created with CS2 it opens (I dragged them over from CS2, I have since removed CS2 from this computer, it's still on my laptop) I haven't tried creating them and importing them to this computer).
I'm using Microsoft Office Word 2003 to save the How Tos as html files, and notepad to edit Add_001.howto file.
Since I gotten this error, I reloaded CS3 Design Standard, it didn't fix the problem. Also I have ensured that the Add_001.howto file points to the right location (C:\Program Files\Adobe\Adobe Photoshop CS3\Help\additional how to content)and is in the right format:
"John Shaws CS3" "47. A GLOSSARY OF IMAGING TERMS" 47.html (works).
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" Noise Ninja 001.html (doesn't work)
The only thing new on the computer is a brand spanking new EVGA NVidia Geforce 9500GT PCI express(512 mb ddr2 dual DVI output) with the latest drivers. It replaced NVidia GeForce 6600GS and Matrox Millenium video cards (the Matrox). The new video card does not include some program that allows it to run MS-DOS programs, but I don't feel that is causing the problem.
System Info:
Photoshop CS3 10.0.1
Computer: Gateway DX310X with Gateway FPD1975W and FPD1730 monitors
Windows XP Media Center Edition, Service Pack 3
Intel Pentium D proccessor
1GB internal memory
168GB of free space on hard drive.
I hope I have given you suffiecient information to give me some possible solutions.
Thanks
Rick

Mylenium
Thanks for the assist.
It isn't a Windows Indexing Service problem.
It is an operator problem. As you pointed out the long name and spacing are the issue here.
I changed the the Add_001.howto file from:
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" Noise Ninja 001.html
to:
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" NN001.html
I changed the file in the Additional How To Content folder, to match.
And it works now.
Now that I know what was wrong with my file names, I'll be able to get the various plugin help files/documents into Photoshop so I won't have to get out of it to get help on them.
Thanks
Rick

Premission settings for users creating files and folder on my XServe

I am setting up a new Xserve and we are basically using it as a file server. I have a user that logs on creates and new folder and a file. When any one else opens that file it is READ ONLY. What do I need to do to make it so when any of my users create a file or folder on the server any one of my users can have READ/WRITE permission to the files?

Can you elaborate? I am not aware of any m3u playlist being present but maybe there is. I have done this many times before. I move tons of files around in my music folder, add/delete/change, and rather than have iTunes try to figure it all out again, I just remove everything out of iTunes and add my entire folder back. I've done it probably 50 times in the past and now, when I do it, it's creating playlists for every single folder or album or something, just as the original poster has described. I do not like the behavior and would like to turn it off now! I'm on Mac so iTunes Folder Watch will not work for me. Any suggestions?

Get personalization settings for user

Similar Messages

Maybe you are looking for