Get radius from map selection event

How can I get the radius and the UOM from a MapSelectionEvent?
Thank you,
Monica

Hi,
what is the usecase. Do you want to know if the users selected a column, or do you know the table cell the user clicked into ? Note that the selectionEvent does not pass the column information of the mouse focus. Also, which release of JDeveloper do you use?
Frank

Similar Messages

Getting Dump from a select query

Dear All,
Am selecting records from KEKO and storing into E1KEKO internal table. But am getting dump error. I need to send those E1KEKO records as idoc. Kindly help me out how to fix this dump.
SELECT * INTO CORRESPONDING FIELDS OF e1keko
    FROM keko
    WHERE keko~matnr = p_matnr
      AND keko~werks = p_werks
      AND keko~bwtar = 'Z06'
      AND keko~bwvar = 'Z06'.
    CLEAR t_idoc_data.
    t_idoc_data-segnam = c_segnam_e1keko.
    t_idoc_data-mandt = sy-mandt.
    t_idoc_data-sdata = e1keko.
    APPEND t_idoc_data.
    CLEAR e1keph.
endselect
Thanks in advance.
Anandhan

Hi,
If i use the below select query in a test program, that time also am getting the same dump.
DATA: e1keph TYPE e1keph,
      e1keko TYPE e1keko.
   SELECT * INTO CORRESPONDING FIELDS OF e1keko
    FROM keko
    WHERE keko~matnr = '000000000010801071'.
endselect.
(code}
The dump showing the below message
The reason for the exception is:
In a SELECT access, the read file could not be placed in the target
field provided.
Either the conversion is not supported for the type of the target field
the target field is too small to include the value, or the data does no
have the format required for the target field.
Thanks in advance
Anandhan

Get year from user selected month in field name

Hi BExperts,
I would your help about this problem on BI 7 :
At the opening of the query, user selects a month (for example 03.2007).
From this month, i have to indicate key figures on the selected month (03.2007) and key figures on the corresponding year (here 2007).
I'm using a variable in order to get the selected month (0I_CMNTH).
I don't know how to get the corresponding year (with a variable) ?
For example : user selects "03.2007", in the query i would have :
Period Key figure
03.2007     17
2007           38
Thanks for help.
Points will be assigned.
Cheers,
Vince.

Hello,
         I am not sure about the one you mentioned but this is another way which you can try by creating the customer exit variable V_YEAR under 0calyear characteristic and add the following code for gettting the previous year.
data: year(4) type n,
         year1(4) type n.
when 'V_YEAR '.
if i_step = 2. "after the popup
loop at i_t_var_range into loc_var_range
where vnam = '0I_CMNTH'.
year = loc_var_range-low (4).
year1 = year - 1.
clear l_s_range.
l_s_range-low = year1.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
append l_s_range to e_t_range.
exit.
endloop.
endif.

Single Query for getting total no of records N getting records from a selected range

Hi,
Got the below query:
SELECT a.*, rowid FROM (SELECT name, postcode FROM Tbl ORDER BY name asc)a WHERE ROWNUM <=30
MINUS
SELECT b.*, rowid FROM (SELECT name, postcode FROM Tbl ORDER BY name asc) b WHERE ROWNUM <= 10
Though I got the results right, I also want to know the total no of records from "SELECT name, postcode FROM Tbl ORDER BY name asc". Does anyone knows how to do it in a single query?
Thanks.

hi Carol
The following output may help you.
SQL> l
1 select * from emp where (rowid,0) in (select rowid,mod(rownum,10)-rownum from emp)
2 minus
3* select * from emp where (rowid,0) in (select rowid,mod(rownum,6)-rownum from emp)
SQL> /
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7839 KING PRESIDENT 17-NOV-81 5000 10
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
7876 ADAMS CLERK 7788 12-JAN-83 1100 20
7900 JAMES CLERK 7698 03-DEC-81 950 30
The above query fetches the 6,7,8,9th records only.
Well my suggestion would be not to use ROWNUM directly in where clause since it changes dynamically. it is not a fixed value. for example pls see the result.
SQL> select rownum,empno,ename,sal,job from emp where sal > 3000;
ROWNUM EMPNO ENAME SAL JOB
1 7839 KING 5000 PRESIDENT
SQL> select rownum,empno,ename,sal,job from emp where sal > 1000;
ROWNUM EMPNO ENAME SAL JOB
1 7566 JONES 2975 MANAGER
2 7654 MARTIN 1250 SALESMAN
3 7698 BLAKE 2850 MANAGER
4 7782 CLARK 2450 MANAGER
5 7788 SCOTT 3000 ANALYST
6 7839 KING 5000 PRESIDENT
7 7844 TURNER 1500 SALESMAN
8 7876 ADAMS 1100 CLERK
9 7902 FORD 3000 ANALYST
10 7934 MILLER 1300 CLERK
10 rows selected.
SQL> select * from emp where rownum = 1;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7566 JONES MANAGER 7839 02-APR-81 2975 20
The record of employee KING is getting the rownum differently.
My understanding (out of my little knowledge) is the rownum values are assigned to the records only after the records are read physically and after applying the conditions(without rownum). Then the row numbers (rownum) is assigned to the records. Hence the rownum is not constant to a record since it is a dynamic value.
Well i would like to know the suggestions of the ORACLE EXPERTS here in the discussion forum.
If my finding is correct then OK if not Pls excuse me and pls give the correct solution
Regards
Prakash Eranki
[email protected]

Photoshop script Get template from Bridge selection

Hi,
I was looking for a script to get selected template pdf file in bridge selection to open in photoshop by an photoshop plugin. script should auto configure by default to document size as pervious opened or created document. Later user need to select a bunch of images to set in that opened document of the template.

Rags also has a script to build PSD collage templates and scripts to populate then and there is my Photo Collage Toolkits the make it easy to create template files and populate then. Also included is a script the lets you tile images into a document. Designed to let you ptint image on roll paper without paper waste.
Photo Collage Toolkit UPDATED Dec 3, 2012 Added Animated SnowGlobe, SnowGlobe Action Set, SnowGlobe Template and SnowGlobe Video Demo.
http://www.mouseprints.net/old/dpr/PhotoCollageToolkit.html
Paste Image Roll http://www.mouseprints.net/old/dpr/PasteImageRoll.html

Air Javascript - Get path from user selected directory

Solution: The resulting variable is just an air.File, and
nativePath is accessible, as I expected. It just did nothing the
first few times I tried it.

Try this:
SPPlatformFileSpecification spec;
// do sADMBasic->StandardGetDirectoryDialog()
ai::FilePath path;
sAIFilePath->SetFromSPFileSpec(spec, path);
Then talk to path to get your location. Hopefully that does the job. I've never used StandardGetDirectoryDialog() though, so for all I know its broken.

How to get Radio button select event in my co

Hi,
I want to get the radio button selection event in my co,how can i get the event?

Hi,
841475 wrote:
I want to get the radio button selection event in my co,how can i get the event?---There is no event for radio button.
---U need to explicitily set the event for the radio button.
Action:FirePaatialAction
Event:RadioEvent---Get the event in co by below code:
if("RadioEvent".equals(pageContext.getParameter(EVENT_PARAM)))
---In radio button event..:)
Regards
Meher Irk

Calling 'show hide' event from 'select' event

Hi all,
is it possible to call an event from another event?
Can i call the 'show hide' event from the 'select' event to disclose the selected row?
As a sidenote: is it possible to remove the show/hide button/link but to retain the show/hide functionality?
Thanks in advance....
Regards,
Robert

Hi Gabrielle,
Yes indeed... the row information is sent... the 'select' event i'm refferring to is the one generated when you drag a viewobject as a readonly table to a UIX datapage...
It is generated initially as
<event name="select" source="EmpView10">
    <set target="${bindings.EmpView1Iterator}" property="currentRowIndexInRange" value="${ui:tableSelectedIndex(uix, 'EmpView10')}"/>
</event>However i must have made a typo last time as it works now... ohwell.. made some changes and submitted the selected row as parameter using
    <invoke method="handleEvent" javaType="view.DisclosureEventHandler">
        <parameters>
            
            <parameter javaType="java.lang.String" value="${ui:tableSelectedIndex(uix, 'EmpView10')}" />
            
            <parameter javaType="java.lang.String" value="detailDisclosure" />
            
            <parameter javaType="oracle.cabo.servlet.expl.ControllerImplicitObject" value="${uix}"/>
        </parameters>
</invoke>This works more cleanly and can be reused...
Thanks for your replies... it always helps when someone is thinking along... it makes you takes some crossroads you wouldn't think of...
Regards,
Robert

How to processing the results from the select statement in SQL query?

Hi
This might be too simple, but my knowledge of the SQL is very limited...
I have table where I do have details from calls (Lync QoE).
I can take all calls from the table, but I would like to count the concurrent calls on the table. This is how I got it work on the Excel to work (but I would like to do that on the SQL statement to get it more dynamic use):
Table have these line and this is what I get out from the Select):
[callid],[start],[end]
1ABC,1.1.2014 01:00:15, 1.1.2014 01:01:00
5DEF,1.1.2014 01:00:45, 1.1.2014 01:05:00
FDE2,1.1.2014 01:03:15, 1.1.2014 01:04:00
KDJ8,1.1.2014 01:04:15, 1.1.2014 01:06:00
FDJ8,2.1.2014 01:04:15, 2.1.2014 01:06:00
KDSE,3.1.2014 01:04:15, 3.1.2014 01:06:00
The information I would like to get, is what is the maximum amount of the concurrent calls per day.
On the excel I basically count line by line how many concurrent calls each line have had, and then pickup the highest one. On above example the calls 5DEF, FDE2 and FDE2 have been active at the same time which gives 3 for the first day.
The table is ordered by the start. So let say the code is on the third line (FDE2). I need to count calls from before which end time is after the start time (of FDE2), but also I need to count calls after (FDE2) which are started before the current
call has ended.
Petri

Unfortunately your post is off topic as it's not specific to SQL Server Samples and Community Projects.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to SQL Server Samples and Community Projects and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCSA, MCITP, MCDBA
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Bridge- get photos from camera... no valid files found

I am using Photoshop CS3 on a laptop with Windows Vista and a Canon 30D camera.
When I go to Bridge > File > Get photos from camera > select Canon EOS 30D, I get the message 'No Valid Files Found'
What are the possible causes? There are raw files on the CF that have not been downloaded yet. This is my first attempt at downloading the photos through Bridge. I normally use the Can EOS Utility.
Thanks for the help.
Dale

edit: first answer deleted because this way of copying files was stated in your original post already, sorry.
If you are able to copy one way or an other the RAW files to a folder on your PC then point Bridge to this folder and that should be working, Try also to purge cache for that folder and renew Bridge preferences.
I use Mac and don't know the correct way to install ACR on a PC. Have you checked the plug in info in PSCS if your ACR version is shown in the list?

How to get rid of the loop in ALV output from At selection screen event?

I have several push buttons on a selection screen.
Clikc on a button, then it pops up an editable ALV report. (This gets triggered AT SELECTION SCREEN event.). REUSE_ALV_GRID_DISPLAY_LVC..
On the ALV output, I enabled F4 for a couple of fields. Once I click on the F4 button, ONF4 method gets triggerd and a pop up appears with custom search helps.
choose a line and it fills the cell.
Upto this it works fine.
Now I click on the BACK button at the ALV output, it takes me to the selection screen. I click on the button again, it show the editable ALV. Now when I click on the F4 button, the pop up comes up twice and the cell gets filled from the second pop - up.
How to control this?
Probably I am not refreshing something?
(I am using REUSE_ALV_GRID_DISPLAY_LVC and tooks ome code for ONF4 event from BCALV_*DATATYPES (forgot the exact name) program.)
Thanks,
Ven

Hi,
FORM refresh_grid USING pw_grid TYPE REF TO cl_gui_alv_grid.
*Work area
DATA : wal_stable TYPE lvc_s_stbl.
CHECK NOT pw_grid IS INITIAL.
wal_stable-col = c_check.
wal_stable-row = c_check.
*Method to refresh grid
CALL METHOD pw_grid->refresh_table_display
       EXPORTING
         is_stable      = wal_stable
         i_soft_refresh = c_check
       EXCEPTIONS
         finished       = 1
         OTHERS         = 2.
ENDFORM.                    " refresh_grid
Thanks,
Sree.

How do I get video from my iPhone to iMovie? The videos download to iPhoto, but are not "available" in iMovie when I select iPhoto in event library.

How do I get video from my iPhone to iMovie? The videos download to iPhoto, but are not "available" in iMovie when I select iPhoto in event library.

I haven't launched iMovie in a while, and I've used iPhoto to import many videos from my iPhone's Camera Roll since the last time I launched and used iMovie.
iMovie prompted me to create/update the thumbnails for my iPhoto videos, along with indicating no iPhoto videos will be available with iMovie until this is completed.
Not sure how to do this manually, but this may be your problem.

How to get parameter value from report in event of value-request?

Hi everyone,
The customer want to use particular F4 help on report, but some input value before press enter key are not used in event of "at selection-screen on value-request for xxx", How to get parameter value in this event?
many thanks!
Jack

You probably want to look at function module DYNP_VALUES_READ to allow you to read the values of the other screen fields during the F4 event... below is a simple demo of this - when you press F4 the value from the p_field is read and returned in the p_desc field.
Jonathan
report zlocal_jc_sdn_f4_value_read.
parameters:
p_field(10)           type c obligatory, "field with F4
p_desc(40)            type c lower case.
at selection-screen output.
perform lock_p_desc_field.
at selection-screen on value-request for p_field.
perform f4_field.
*&      Form f4_field
form f4_field.
*" Quick demo custom pick list...
data:
    l_desc             like p_desc,
    l_dyname           like d020s-prog,
    l_dynumb           like d020s-dnum,
    ls_dynpfields      like dynpread,
    lt_dynpfields      like dynpread occurs 10.
l_dynumb = sy-dynnr.
l_dyname = sy-repid.
*" Read screen value of P_FIELD
ls_dynpfields-fieldname = 'P_FIELD'.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_READ'
    exporting
      dyname     = l_dyname
      dynumb     = l_dynumb
    tables
      dynpfields = lt_dynpfields
    exceptions
      others     = 1.
check sy-subrc is initial.
*" See what user typed in P_FIELD:
read table lt_dynpfields into ls_dynpfields
    with key fieldname = 'P_FIELD'.
*" normally you would then build your own search list
*" based on value of P_FIELD and call F4IF_INT_TABLE_VALUE_REQUEST
*" but this is just a demo of writing back to the screen...
*" so just put the value from p_field into P_DESC plus some text...
concatenate 'This is a description for' ls_dynpfields-fieldvalue
    into l_desc separated by space.
*" Pop a variable value back into screen
clear: ls_dynpfields.
ls_dynpfields-fieldname = 'P_DESC'.
ls_dynpfields-fieldvalue = l_desc.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname     = l_dyname
      dynumb     = l_dynumb
    tables
      dynpfields = lt_dynpfields
    exceptions
      others     = 0.
endform.                                                    "f4_field
*&      Form lock_p_desc_field
form lock_p_desc_field.
*" Make P_DESC into a display field
loop at screen.
    if screen-name = 'P_DESC'.
      screen-input = '0'.
      modify screen.
      exit.
    endif.
endloop.
endform.                    "lock_p_desc_field

Getting values from a Map

Hi,
I would like to get values from a Map. This is my Map
courrierId659 = [Ljava.lang.String;@7e6f03,
nomModele = [Ljava.lang.String;@aa594b,
navigation = [Ljava.lang.String;@1cc67fd,
dateImpression = [Ljava.lang.String;@bf2fa9,
nomGestionnaire = [Ljava.lang.String;@1d2279c,
courrierId650 = [Ljava.lang.String;@64635b,
selection = [Ljava.lang.String;@1a93ff1
I want to get all the values whose keys start with courrierId, is possible to get these values in a effective way? or I have to iterate through the Map?
Thank you in advance

elsymenab wrote:
I want to get all the values whose keys start with courrierId, is possible to get these values in a effective way?Yes. Loop through the keys, and where the key meets your criteria, get the value.
or I have to iterate through the Map?That sounds pretty effective to me.
~

WPF UI running in seperate runspace - able to set/get controls via synchronized hash table, but referencing the control via the hash table from within an event handler causes both runspaces to hang.

I am trying to build a proof of concept where a WPF form is hosted in a seperate runspace and updates are handled from the primary shell/runspace. I have had some success thanks to a great article by Boe Prox, but I am having an issue I wanted to open up
to see if anyone had a suggestion.
My goals are as follows:
1.) Set control properties from the primary runspace (Completed)
2.) Get control properties from the primary runspace (Completed)
3.) Respond to WPF form events in the UI runspace from the primary runspace (Kind of broken).
I have the ability to read/write values to the form, but I am having difficulty with events. Specifically, I can fire and handle events, but the minute I try to reference the $SyncHash from within the event it appears to cause a blocking condition hanging both
runspaces. As a result, I am unable to update the form based on an event being fired by a control.
In the example below, the form is loaded and the following steps occur:
1.) Update-Combobox is called and it populates the combobox with a list of service names and selects the first item.
2.) update-textbox is called and sets the Text property of the textbox.
3.) The Text value of the textbox is read by the function read-textbox and output using write-host.
4.) An event handle is registered for the SelectionChanged event for the combobox to call the update-textbox function used earlier.
5.) If you change the selection on the combobox, the shell and UI hangs as soon as $SyncHash is referenced. I suspect this is causing some sort of blocking condition from multiple threads trying to access the synchronized nature of the hash table, but I am
unsure as to why / how to work around it. If you comment out the line "$SyncHash.TXT_Output.Dispatcher.Invoke("Send",[action]{$SyncHash.TXT_Output.Text = $Value})" within update-textbox the event handler will execute/complete.
$UI_JobScript =
try{
Function New-Form ([XML]$XAML_Form){
$XML_Node_Reader=(New-Object System.Xml.XmlNodeReader $XAML_Form)
[Windows.Markup.XamlReader]::Load($XML_Node_Reader)
try{
Add-Type –AssemblyName PresentationFramework
Add-Type –AssemblyName PresentationCore
Add-Type –AssemblyName WindowsBase
catch{
Throw "Unable to load the requisite Windows Presentation Foundation assemblies. Please verify that the .NET Framework 3.5 Service Pack 1 or later is installed on this system."
$Form = New-Form -XAML_Form $SyncHash.XAML_Form
$SyncHash.Form = $Form
$SyncHash.CMB_Services = $SyncHash.Form.FindName("CMB_Services")
$SyncHash.TXT_Output = $SyncHash.Form.FindName("TXT_Output")
$SyncHash.Form.ShowDialog() | Out-Null
$SyncHash.Error = $Error
catch{
write-host $_.Exception.Message
#End UI_JobScript
#Begin Main
add-type -AssemblyName WindowsBase
[XML]$XAML_Form = @"
<Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
<Window.Resources>
<DataTemplate x:Key="DTMPL_Name">
<TextBlock Text="{Binding Path=Name}" />
</DataTemplate>
</Window.Resources>
<DockPanel LastChildFill="True">
<StackPanel Orientation="Horizontal" DockPanel.Dock="Top">
<Label Name="LBL_Services" Content="Services:" />
<ComboBox Name="CMB_Services" ItemTemplate="{StaticResource DTMPL_Name}"/>
</StackPanel>
<TextBox Name="TXT_Output"/>
</DockPanel>
</Window>
$SyncHash = [hashtable]::Synchronized(@{})
$SyncHash.Add("XAML_Form",$XAML_Form)
$SyncHash.Add("InitialScript", $InitialScript)
$Normal = [System.Windows.Threading.DispatcherPriority]::Normal
$UI_Runspace =[RunspaceFactory]::CreateRunspace()
$UI_Runspace.ApartmentState = [System.Threading.ApartmentState]::STA
$UI_Runspace.ThreadOptions = [System.Management.Automation.Runspaces.PSThreadOptions]::ReuseThread
$UI_Runspace.Open()
$UI_Runspace.SessionStateProxy.SetVariable("SyncHash",$SyncHash)
$UI_Pipeline = [PowerShell]::Create()
$UI_Pipeline.Runspace=$UI_Runspace
$UI_Pipeline.AddScript($UI_JobScript) | out-Null
$Job = $UI_Pipeline.BeginInvoke()
$SyncHash.ServiceList = get-service | select name, status | Sort-Object -Property Name
Function Update-Combobox{
write-host "`nBegin Update-Combobox [$(get-date)]"
$SyncHash.CMB_Services.Dispatcher.Invoke($Normal,[action]{$SyncHash.CMB_Services.ItemsSource = $SyncHash.ServiceList})
$SyncHash.CMB_Services.Dispatcher.Invoke($Normal,[action]{$SyncHash.CMB_Services.SelectedIndex = 0})
write-host "`End Update-Combobox [$(get-date)]"
Function Update-Textbox([string]$Value){
write-host "`nBegin Update-Textbox [$(get-date)]"
$SyncHash.TXT_Output.Dispatcher.Invoke("Send",[action]{$SyncHash.TXT_Output.Text = $Value})
write-host "End Update-Textbox [$(get-date)]"
Function Read-Textbox(){
write-host "`nBegin Read-Textbox [$(get-date)]"
$SyncHash.TXT_Output.Dispatcher.Invoke($Normal,[action]{$Global:Return = $SyncHash.TXT_Output.Text})
$Global:Return
remove-variable -Name Return -scope Global
write-host "End Read-Textbox [$(get-date)]"
#Give the form some time to load in the other runspace
$MaxWaitCycles = 5
while (($SyncHash.Form.IsInitialized -eq $Null)-and ($MaxWaitCycles -gt 0)){
Start-Sleep -Milliseconds 200
$MaxWaitCycles--
Update-ComboBox
Update-Textbox -Value $("Initial Load: $(get-date)")
Write-Host "Value Read From Textbox: $(Read-TextBox)"
Register-ObjectEvent -InputObject $SyncHash.CMB_Services -EventName SelectionChanged -SourceIdentifier "CMB_Services.SelectionChanged" -action {Update-Textbox -Value $("From Selection Changed Event: $(get-date)")}

Thanks again for the responses. This may not be possible, but I thought I would throw it out there. I appreciate your help in looking into this.
To clarify the "Respond to control events in the main runspace"... I'm would like to have an event generated by a form object in the UI runspace (ex: combo box selectionchanged event) trigger a delegate within the main runspace and have that delegate in
the main runspace update the form in the UI runspace.
ex:
1.) User changes selection on combo box generating form event
2.) Event calls delegate (which I have gotten to work)
3.) Delegate does some basic processing (works)
4.) Delegate attempts to update form in UI runspace (hangs)
As to the delegates / which runspace they are running in. I see the $synchash variable if I run get-var within a delegate, but I do not see the $Form variable so I am assuming that they are in the main runspace. Do you agree with that assumption?

Get radius from map selection event

Similar Messages

Maybe you are looking for