Get the current pageno at runtime in Report 6i
Hi to everybody,
I wish to know how can i get the current pageno at runtime in report 6i ,
i want to display data at end page of the report on a condition that it is the last page of the report. i can get the last page but not the current page no at runtime.
Take a look into SRW.GET_PAGE_NUM. You can use this in format trigger and It will return you current page number.
Similar Messages
-
How to get the current cursor position in word report?
I am generating a word report. But I would like to keep the table in one page. However, I did not find the way to do it in labview. Somebody would give me some suggestions? I appreciate a lot.
One way I think I can do is to find the current cursor position. Since I know the table size so I can figure out if the left space in the current page is enough to hold the table. But I do not know how to locate the curent cursor position in word document in labview programmatically. I appreciate any suggestions on this question.
Thanks.Hi,
when you insert data in a word document you have to refer to bookmarks rather than cursor position.
If you are using the Report Generation Toolkit for Office it is explained in the manual chapter 3-1.
See also the example: Generate Report From Template (Word).vi included in the toolkit.
If you aren't using the toolkit, you still have to refer to bookmark as reference points to insert and/or fetch data.
The principle is:
- First create a document in which you insert bookmarks where you wish and save it as a template
- In LV open your template document and insert in it your data referring to bookmarks as insertion points
- At the end save your report with another name, so you still have the template
I hope I have been clear enough, if not just as
k!
Good luck,
Alberto -
How to get the "current date" in the BEx?
Hi all,
I need to get the "current date" in my Bex report in order to make a comparison. I know there is a "How to" which shows how to get the current date via a User Exit, but I didn't find it. Could you please help me?
Thanks1. Create a New Formula in Key Figures structure
2. Give tech name and description and Select "New variable" option
3. Next screen will launch Variable Wizard -> create a new variable with replacement path as processing type
4. in next screene select the date characteristic that represents the first date to use in the calculation (From Date)
5. In the next screen select Key in the Replace Variable with field. Leave all the other options as they are
6. In the next Currencies and Units screen select Date as the Dimension ID.
6. Save variable
repeate the Above steps to create another variable (To Date)
and now you can use these two new replacement path variables in your new formula.
Dev -
How to Get the Current Workitem id at runtime
Hi All,
I have a scenario, where request pending with a user who has already resigned the organization. The requirement is that we need to provide a report
of the request and with whom it is pending with along with the workitem id with a forward push button.
So that if the user identifies that a request is pending with someone he can click the record and press for the forward button and a pop-up to be showed where he can enter the userid to whom he needs to forward it.
In this scenario can anyone tell me how to get the current workitem id at run time and to save it to a custom table.
I tried with method before workitem execution, but here i am not getting the current workitem id.
Can you please suggest a good solution for this.
Thanks and Regards,
BalajiKarri,
I think i can explain you with an example.
Here is my Scenario.
A user has raised a Gate pass and it went to all approval's and got approved and the material is also sent out from the plant. Lets take the date as 1.1.2013 (A Warehouse person have done the checking and sent out of the plant).
On 1.3.2013 some of the material has been returned and a material inward request has been raised and now the warehouse person has to do a inward checking and to sent it back for the initiator for the approval, but the warehouse person has resigned the organization on 1.2.2013, now the workitem is pending with the warehouse person who has already resigned.
My scenario is once the material inward request is created and before the workitem is delivered to the warehouse person i need to get the workitem id and to store the workitem some where.
So that in future if any warehouse dept head wants to forward the workitem which are lying in the person inbox who has already resigned he can do it via a report using this workitem id.
So, can anyone help how to get the dialog workitem id before the workitem creation or execution. I tried with "method before workitem execution" but my break point is not triggering at this point.
Thanks and Regards,
Balaji -
Get the current line no.(similar to sy-linno in report) in Sapscript form
Hi everyone,
In ABAP reporting, you can use sy-linno to determine the current line no.
But if in sapscript form,
does any system field to get the currect line no. or y-origin. ?
Just say the program is now runing and have written several lines in a window of the form.
AS This is the first line
AS This is the second line
AS This is the third line
how to get the current line = 3 or yorigin '+3' LN?
Thanks for reply in advance.Hi,
you can also chk the sy-linno directly in your script.
Regards
Subramanian -
How can I get (using API) the current sort column for some report
hello,
How can I get (using API) the current sort column for some report ? For example something like "fsp_sort_1_desc" - if the user sorts by the first column ?
I cannot use the :REQUEST for this, sometimes the current sort column is not in the :REQUEST, but it is still active.
I thought it was posssible by using
APEX_UTIL.GET_PREFERENCE (
p_preference IN VARCHAR2 DEFAULT NULL,
p_user IN VARCHAR2 DEFAULT V('USER'))
RETURN VARCHAR2;
function, but I don't really know which preference should I pass as parameter.
looking in WWV_FLOW_PREFERENCES$, i saw preferences_names like FSP4000_P527_R6281510839654570_SORT , I'm not sure how this name is formed.
I'm using generic columns for that complex report (which has a flexible number of columns shown), and the idea is that sometimes I have to overwrite that sort column, in case the user chose the version of the report with fewer columns than the previous one.
Can I get (using API) a list of all preferences set for some user ?
Thank you,seems that it is FSP<app_number>P<pagenumber>R<regionnumber>_SORT.
is there anyplace where I can get these kind of things documented ?
Thank you. -
Oracle 11i release 2 error "Unable to get the current group"
Hi oracle gurus,
I have been trying to install oracle 11g rel 2 on HPUX 11.31 and i am getting the following error
# more installActions2010-01-06_10-27-37AM.log
oracle.install.ivw.db.driver.DBInstaller
-scratchPath
/u01/tmp/OraInstall2010-01-06_10-27-37AM
-sourceLoc
/u01/install/database/install/../stage/products.xml
-sourceType
network
-timestamp
2010-01-06_10-27-37AM
INFO: Loading data from: jar:file:/u01/tmp/OraInstall2010-01-06_10-27-37AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigComma
ndMappings.xml
INFO: Loading beanstore from jar:file:/u01/tmp/OraInstall2010-01-06_10-27-37AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigC
ommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/u01/tmp/OraInstall2010-01-06_10-27-37AM/ext/jlib/installcommons_1.0.0b.jar!/
oracle/install/driver/oui/resource/ConfigCommandMappings.xml
SEVERE: [FATAL] An internal error occurred within cluster verification framework
Unable to get the current group.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:11
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Database 11g Release 2 Installer
$
>>
# more oraInstall2010-01-06_10-27-37AM.err
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:11
oracle.cluster.verification.VerificationException: An internal error occurred within cluster verification framework
Unable to get the current group
at oracle.cluster.verification.ClusterVerification.<init>(ClusterVerification.java:200)
at oracle.cluster.verification.ClusterVerification.getInstance(ClusterVerification.java:294)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:407)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:126)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
---# End Stacktrace #-----------------------------
<<
$ uname -a
HP-UX rx2600 B.11.31 U ia64 <XXXXXXXX> unlimited-user license
# swlist | grep -i oe
HP-Caliper-PERF C.11.31.04 HP Caliper OE Bundle
HP-WDB-DEBUGGER C.11.31.04 HP DEBUGGER OE Bundle
HPUX11i-DC-OE B.11.31.0903 HP-UX Data Center Operating Environment
# swlist | grep -i qpk
QPKBASE B.11.31.0903.334a Base Quality Pack Bundle for HP-UX 11i v3, March 2009
# swlist -l product | grep -i c++
ACXX C.06.20 HP C/aC++ Compiler
C-ANSI-C C.06.20 HP C/aC++ Compiler
PHSS_37501 1.0 aC++ Runtime (IA: A.06.16, PA: A.03.76)
PHSS_39824 1.0 HP C/aC++ Compiler (A.06.23)
i start the installation as oracle and my group and user id is
$ id
uid=109(oracle) gid=102(oinstall) groups=101(dba),104(asmdba)
Please let me know what else do i need, we might have to use the hardware for testing another application so i am limited in terms of time constraints
any help is much appreciated, Thank you!!
Regards,
Dasjith
Edited by: user10247524 on Jan 6, 2010 7:52 AMHi Stig Sundqvist
Where can i find MOS Doc 983713.1 ??You have to login https://support.oracle.com/CSP/ui/flash.html and you have to CSI account. This site is oracle site for tech. documents for can rise SR etc.. for more details please check
What is CSI:
Re: Installing Oracle Database 10.2.0.4
And how do i do to fix this problem ????Login metalink then find upper note and follow document
Hope it helps
Regard
Helios -
How to get the current class name in static method?
Hi,
I'd like to get the current class name in a static method. This class is intended to be extended. So I would expect that the subclass need not to override this method and at the runtime, the method can get the subclass name.
getClass() doesn't work, because it is not a static method.
I would suggest Java to make getClass() static. It makes sense.
But in the mean time, does anybody give an idea to work around it?
Thank you,
BillWhy not create an instance in a static method and use getClass() of the instance?
public class Test {
public static Class getClassName() {
return new Test().getClass(); -
Can't get the current bitrate info use SMPTE-TT Plugin
Using OSMF2.0 to stream a smil title.
Add the MediaPlayerCapabilityChangeEvent.IS_DYNAMIC_STREAM_CHANGE event listener, after the event dispatch then add the DynamicStreamEvent.SWITCHING_CHANGE event listener.
The bitrate info can be report, normal. But after I add the SMPTE-TT plugin and load it like this:
var pluginResource:MediaResourceBase = new PluginInfoResource(new SMPTETTPluginInfo);mediaFactory.loadPlugin(pluginResource);
The title can be stream correct and the quality of the video can be set by the bandwidth, but only the DynamicStreamEvent.SWITCHING_CHANGE event can not be dispatch, so I can't get the current bitrate info.
I debug it in the OSMF source code and find the issue in the org.osmf.elements.compositeClasses.ParallelDynamicStreamTrait class line 323
FYI:
onSwitchingChange function that the numChildrenSwitching property always 0, so it can not call the setSwitching function and can not dispatch DynamicStreamEvent.SWITCHING_CHANGE event.
So, I add some changes from line 333 to line 336 and it has be fix:
Environment:Flex SDK 4.6 + flash player 11.8.
I don't know it is a bug in the OSMF framework and I want to get more info about it.
Thanks.can you turn off the message pane (F8) between restarts? I am guessing it will turn on again as well.
-
Variant must get the current date from the system.
Hi All,
I really appreciate your help on below please;
I need to create a variant and schedule a report program once a day.
But variant must get the current date from the system (sy-datum).
The program should run for the values in the variant in schedule job run;
Can I do this using SAP variants (for Report Program) and schedule the job.
Many thanks
IverStandard functionality.
http://help.sap.com/saphelp_nw70/helpdata/en/c0/98039be58611d194cc00a0c94260a5/frameset.htm
Thomas -
Servlet acts as an RMI client to get the current time of day
my application is servlet acts as an RMI client to get the current time of day from the DaytimeServlet RMI server so iam not getting the correctime....
import java.io.*;
import java.rmi.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class DaytimeClientServlet extends
HttpServlet
DaytimeServer daytime;
protected DaytimeServer getDaytimeServer() {
DaytimeServer stub.
if (System.getSecurityManager() == null) {
System.setSecurityManager(new
RMISecurityManager());
try {
Registry registry =
LocateRegistry.getRegistry(getRegistryHost(),
getRegistryPort());
return
(DaytimeServer)registry.lookup(getRegistryName());
catch (Exception e) {
getServletContext().log(e, "Problem getting
DaytimeServer reference");
return null;
private String getRegistryName() {
String name = getInitParameter("registryName");
return (name == null ? "DaytimeServlet" : name);
private String getRegistryHost() {
return getInitParameter("registryHost");
private int getRegistryPort() {
try { return
Integer.parseInt(getInitParameter("registryPort");
catch (NumberFormatException e) { return
Registry.REGISTRY_PORT; }
public void doGet(HttpServletRequest req,
HttpServletResponse res)
throws
ServletException, IOException {
res.setContentType("text/plain");
PrintWriter out = res.getWriter();
if (daytime == null) {
daytime = getDaytimeserver();
if (daytime == null) {
throw new UnavailableException(this, "Could
not locate daytime");
out.println(daytime.getDate().toString());
please help me outHi lucentb,
what i observed from your code is some simple coding faults are there.. so i am giving you some test code..
i hope this will help you out.
import java.io.*;
import java.rmi.*;
import java.rmi.registry.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class DaytimeClientServlet extends HttpServlet
DaytimeServer daytime;
protected DaytimeServer getDaytimeServer()
if (System.getSecurityManager() == null)
System.setSecurityManager(new RMISecurityManager());
try {
Registry registry = LocateRegistry.getRegistry(getRegistryHost(),
getRegistryPort());
return
(DaytimeServer)registry.lookup(getRegistryName());
catch (Exception e) {
getServletContext().log(e, "Problem getting DaytimeServer reference");
return null;
private String getRegistryName()
String name = getInitParameter("registryName");
return (name == null ? "DaytimeServlet" : name);
private String getRegistryHost() {
return getInitParameter("registryHost");
private int getRegistryPort()
try
return
Integer.parseInt(getInitParameter("registryPort")); }
catch (NumberFormatException e)
return
Registry.REGISTRY_PORT;
public void doGet(HttpServletRequest req,
HttpServletResponse res)
throws
ServletException, IOException {
res.setContentType("text/plain");
PrintWriter out = res.getWriter();
if (daytime == null) {
daytime = getDaytimeServer();
if (daytime == null) {
// Couldn't get it, so report we're
unavailable.
throw new UnavailableException(this, "Could
not locate daytime");
out.println(daytime.getDate().toString());
If you have any problem after this please send me the exceptions and problem situations with deatils codes..
Regards,
TirumalaRao
Developer Technical Support,
Sun Microsystems, India. -
How to get the current filename and & or path
How can I get the current path or filename?
I didn't really find any answers in the net. this.path or app.path were suggested but I couldn't get it to work.
Thanks in advance for your answer!
Livecycle Designer ES 8.2.1.3144.1.471865Hi,
event.target.path.toString(); will give the full path including the filename.
event.target.documentFileName.toString(); will give the filename only.
Good luck,
Niall -
How to get the current path of my application in java ?
how to get the current path of my application in java ?
thanksTo get the path where your application has been installed you have to do the following:
have a class called "what_ever" in the folder.
then you do a litte:
String path=
what_ever.class.getRessource("what_ever.class").toString()
That get you a string like:
file:/C:/Program Files/Cool_program/what_ever.class
Then you process the result a little to remove anything you don't want:
path=path.substring(path.indexOf('/')+1),path.lastIndexOf('/'))
//Might be a little error here but you should find out //quickly if it's the case
And here you go, you have a nice
C:/Program Files/Cool_program
which is the path to your application.
Hooray -
How to get the current user name of the host who is occupying a specific VM?
I'm developing a winform app with c# code to manage Hyper-V. I need to remind someone if he/she would take a VM which has already been occupied by others.
Is there any powershell cmd or WMI interface to get the current user of a specific VM?
Thanks!Hiya,
from cmd there are quser(Query user) and qwinsta(Query Session)
which should give you that. Don't know how you can incoorperate that in C#, but that should give you something to work with :)
https://technet.microsoft.com/en-us/library/cc785434.aspx
https://technet.microsoft.com/en-us/library/cc788125.aspx -
my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8. How do I get that? When I run a software update, system says there is none. Help
Click here, check that your computer meets the requirements, buy and install the DVD, and then run Software Update.
(73181)
Maybe you are looking for
-
The .exe for media encoder CC is missing from my local computer. I have uninstalled Premiere Pro and Media Encoder using add/remove programs, and then reinstalled Premiere and it is still missing. Using Win 7, 64 bit, 12gb ram. Any ideas? Ive looked
-
Why did I lose the word BACK on the top of my earthlink home page?
-
PO number for B2B Sales Orders.
Hello, B2B orders lines are in the status "PO Created". But while checking the PO number in the Supply TAB, PO number is blank and greyed out. Intrestingly we can see the PO line number. Any pointers? Thanks Radha.
-
Workitem exists in SAP Inbox But does not appear in UWL for some users
Hi, We have a peculiar problem with a standard workflow. This workflow is working fine in SAP Inbox and UWL in portal for most of the users. But sometimes, it does not send workitem to UWL for some users. Any input of as why this happens?
-
Where do i get the 5.1 digital driv
i need the 5. digital dell version.because the website says the download has been ended