Get the Excel file creatoin Date through For Each Loop each excel file in SSIS
I had For Each Loop
in Collection Path had 2 files it had Creation date of 25/01/2014
So I want Update in Table that date as File_Receive_Date column
How Can I do ??
in variable I am using VFile_FULL_Name(=Filename with Path by attach to Foreach loop collection&connection manager)
which other System Variable to use in SSIS ??
I have created vRef_Date but in Expression =====??? what should I do through only SSIS ??
Thanks
Madhu
The easiest approach is https://filepropertiestask.codeplex.com/ can capture the file creation date, but it is not working for all SSIS versions
I recommend using .net FILE IO libraries to get the created date which needs to be done in a Script Task.
The ForLoop approach will not let you achieve this goal.
Arthur
MyBlog
Twitter
Similar Messages
-
I'm using an airport extreme and I keep getting the "Unable to complete backup. An error occurred while copying files to backup volume. The solution on the website is try try again. Its been trying for 5 days now. Now what? Obviously something else needs to be done.
Verify the backup.
Is this TM you are using? TM to airport extreme connected hard disk are known to be fragile at best.
A5 http://pondini.org/TM/Troubleshooting.html
make sure the disk is available and online..
But if it is not working.. then you will have to wipe and start again.
http://pondini.org/TM/Airport.html
If this is not TM then also verify the source disk. -
Getting the last succesful logoin date for user
Hi ,
Iwant to write an java application which will take the userid and get the
last sucessful login date.
I used the sap ume apis for this purpose
There is an API getLastSuccessfulLogonDate() in the class IUserAccount.
But it says
Deprecated.
get last sucessful logon date NOTE: This attribute is not automatically updated during login.
link :https://help.sap.com/javadocs/NW04/current/um/index.html
What does "attribute not updated automaticlaly during login implies".
Is there any other method from where i can get this information
Regards
ManojFew things to mention.
I am using SAP Netweaver 2004s
When i run the code
thisUser = userFact.getUser(userid);
IUserAccount userAccts[] = thisUser.getUserAccounts();
System.err.println(" Iterating in for loop ");
for(int i=0; i<userAccts.length; i++)
d= userAccts<i>.getLastSuccessfulLogonDate();
System.err.println(" got date ");
result = d.toGMTString();
I get the following exception
Login date java.lang.NullPointerException
at SecurityLogic.getLastSuccessfulLogonDate(Unknown Source)
at SecurityRemoteObjectImpl0.getLastSuccessfulLogonDate(SecurityRemoteOb
jectImpl0.java:125)
at SecurityRemoteObjectImpl0p4_Skel.dispatch(SecurityRemoteObjectImpl0p4
_Skel.java:186)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl
.java:304)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:19
3)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4Se
ssionProcessor.java:122)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSes
sionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRu
nner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:3
7)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.ja
va:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:1
70) -
Failed to get the Availability State on server Distriubtionpoint1 for role SMS Distribution Point
Distriubtionpoint1-- Server share distribution point
Distriubtionpoint1-- Acting as site system role (DP)
Distriubtionpoint1--attached under the primary PR0 (Primary server0)
Primary server0-- reporting to CS0 (central site 0)
Distriubtionpoint1-- Windows 2008 sp1 r2 standard
Infrastructure details:-
=============
Distriubtionpoint1 located in different domain with one way trust.
1) Check ping status with FQDN from both domain and it is success.
2) Check port 135, 445, 80,443 through telnet from both domain and success.
3) Primary Server0 account is member of the local admin group on Distriubtionpoint1.
4) Check the PR0-SCCM-DP$ folder NTFS & Share permission
Share permission
a) everyone & local admin group has full control
Security permission
a) System has full permission
b) user has read & exec
4) Local admin full
Sitestat.log error message:
---->: Failed to get the Availability State on server
Distriubtionpoint1 for role SMS Distribution Point. SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:15 PM 952 (0x03B8)
---->: Now polling via NAL for SiteObject "["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\" SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:15 PM 952 (0x03B8)
for ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\, no connection account is available SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:15 PM 952 (0x03B8)
---->: The NAL path ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\ is currently not accessible. SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
Info>: Unable to get available space for the Site Object ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\ SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
STATMSG: ID=4701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_SITE_SYSTEM_STATUS_SUMMARIZER" SYS=Distriubtionpoint1 SITE=PR0 PID=4112 TID=952 GMTDATE=Wed Apr 23 01:00:18.002
2014 ISTR0="\\Distriubtionpoint1\PR0-SCCM-DP$" ISTR1="\\Distriubtionpoint1\PR0-SCCM-DP$" ISTR2="2014 04 4 17 04 31 31 000" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=0 SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:18 PM 952 (0x03B8)
for ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\, no connection account is available SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
---->: GetOperationsManagementData failed to connect to ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\; error
= 5. SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:20 PM 952 (0x03B8)I have tried to access the server share DP from the primary server by using my user
credential. Yes I can able to access the share.
But when I use the system credential to access the share received an error message as shown in below screenshot
Hence i have provided the share and ntfs permission administrators, system, everyone,
primary server account with full control on both tab. but still i am receiving error message.
:\temp>whoami
US\prasath
c:\temp>dir \\PrimaryServer1\SCCM-DP$
Volume in drive \\PrimaryServer1\SCCM-DP$ is Data
Volume Serial Number is 22F0-661B
Directory of \\PrimaryServer1\SCCM-DP$03/17/2014
03:33 PM <DIR> .03/17/2014 03:33 PM <DIR> .
04/01/2014 08:04 AM <DIR> SMSPKG
0 File(s) 0 bytes
3 Dir(s) 514,625,064,960 bytes free
===========================================
C:\Windows\system32>whoami
nt authority\system
C:\Windows\system32>dir
\\PrimaryServer1\SCCM-DP$
Access is denied. -
How do I get the sync of my 3GS on my computer to transfer everything (files, apps, etc.) to my new iphone4? And then how do I move the sync to a newer computer so I can sync the new phone with the new computer?
My 3GS is dying and it's synced to an older computer. I have tons of datafiles as well as apps, music, text messages, etc. that I need to get moved to the new iphone4 I'm getting. Then I need to move the sync to a newer computer so that I can sync the new phone and new computer.
I understand how to get my apps to transfer to a new pc. That's not the issue. It's getting ALL the data from the 3GS to the 4 and then to a new computer.
Thanks.Thanks much, that's very helpful for step one (getting old phone onto new phone). Very clear.
However, I still have the problem of moving to the new computer. How do I move the sync to the new computer after the new phone is set up? -
is there any way to get the server app other than through the app store. The system that I need it on are not connected to the internet.
We run a closed-loop network of apple systems and I tipically downloaded updates on a non-apple system that was on the internet.
Any ideas?I did buy the server app, went to the app store to download it. This system I'm using for downloads is Snow Leopard 10.6.8, it shows that I can download it but only as an Install which says I need 10.8. I can't seem to find a way for it to just download as a package or .dmg file so that I can copy it to DVD/CD or flash drive.
-
How to get the difference of two dates in years,months and days
Hi friends,
how to get the difference of two dates in years,months and days
for ex 2 years 3 months 13 days
select (sysdate-date_Start) from per_periods_of_service
thanksSomething like this...
SQL> ed
Wrote file afiedt.buf
1 with t as (select to_date('17-nov-2006','dd-mon-yyyy') as c_start_date, to_date('21-jan-2008','dd-mon-yyyy') as c_end_date from dual union all
2 select to_date('21-nov-2006','dd-mon-yyyy'), to_date('17-feb-2008','dd-mon-yyyy') from dual union all
3 select to_date('21-jun-2006','dd-mon-yyyy'), to_date('17-jul-2008','dd-mon-yyyy') from dual
4 )
5 -- end of test data
6 select c_start_date, c_end_date
7 ,trunc(months_between(c_end_date, c_start_date) / 12) as yrs
8 ,trunc(mod(months_between(c_end_date, c_start_date), 12)) as mnths
9 ,trunc(c_end_date - add_months(c_start_date, trunc(months_between(c_end_date, c_start_date)))) as dys
10* from t
SQL> /
C_START_D C_END_DAT YRS MNTHS DYS
17-NOV-06 21-JAN-08 1 2 4
21-NOV-06 17-FEB-08 1 2 27
21-JUN-06 17-JUL-08 2 0 26
SQL>But, don't forget that different months have different numbers of days, and leap years can effect it too. -
Getting the difference between 2 dates
Hi,
I am creating a Date object (using today;s day, month and year. hours and minutes come from a config file) and getting the difference between this date and the current date and time.
My code is as follows:
I am passing 07:30 into the method as the parameter aSstart_time.
Calendar newCalendar = Calendar.getInstance(Locale.UK);
SimpleDateFormat dtformat = new SimpleDateFormat("dd-MM-yy HH:mm");
int lIYear = newCalendar.get(newCalendar.YEAR);
int lIMonth = newCalendar.get(newCalendar.MONTH);
int lIDay = newCalendar.get(newCalendar.DAY_OF_MONTH);
String lSstartHrs = aSstart_time.substring(0,aSstart_time.indexOf(":"));
//System.out.println(">>>>>>>>> THE HOURS IS: " + lSstartHrs);
String lSstartMins = aSstart_time.substring(aSstart_time.indexOf(":")+1,aSstart_time.length());
//System.out.println(">>>>>>>>> THE MINS IS: " + lSstartMins);
java.util.Date ldStartTime = new java.util.Date(lIYear,lIMonth,lIDay, Integer.parseInt(lSstartHrs),Integer.parseInt(lSstartMins));
System.out.println("Year: " + lIYear);
System.out.println("Month: " + lIMonth);
System.out.println("Day: " + lIDay);
System.out.println("Hour: " + Integer.parseInt(lSstartHrs));
System.out.println("Min: " + Integer.parseInt(lSstartMins));
System.out.println("The number of milliseconds for current time is: " + newCalendar.getTime().getTime());
System.out.println("The number of milliseconds for 07:30 is: " + ldStartTime.getTime());
System.out.println("calendar time: " + dtformat.format(newCalendar.getTime()).toString());
System.out.println("created time: " + dtformat.format(ldStartTime).toString());
if(newCalendar.getTime().getTime() < ldStartTime.getTime()){
System.out.println("The current time is less than the config time (07:30)");
else{
System.out.println("The time is greater than 07:30");
}When I run this program at 10:06am I get the following output:
Year: 2006
Month: 1
Day: 15
Hour: 7
Min: 30
The number of milliseconds for current time is: 1139997962321
The number of milliseconds for 07:30 is: 61098132600000
calendar time: 15-02-06 10:06
created time: 15-02-06 07:30
The current time is less than the config time (07:30)
The Date.gettime() method should measure the number of milliseconds after 01-01-1970 so the number of milliseconds for the current time (10:06am) should be greater than the number of milliseconds for 07:30. A you can see in the above output this is not the case.
Anybody have any idea why this is happening. Am I using the .gettime() method for the correct purpose.
Any ideas or suggestions would be greatly appreciated.
ThanksIt is beacause Calendar use fully defined year as parameter, so Calendar.set(year + 1900, month, date, hrs, min) is (almost) equivalent to new Date(year, month, date, hrs, min)Example: int year = 85; // old way of specifying a year in a Date
int month = 3;
int date = 12;
int hrs = 12;
int min = 0;
Calendar cal = Calendar.getInstance();
cal.set(year + 1900, month, date, hrs, min);
Date d = new Date(year, month, date, hrs, min);
System.out.println(d);
System.out.println(cal.getTime());You will obtain the same date (except seconds and miliseconds in this case, as they probably won't be zero with Calendar.getInstance(); ) -
I have Microsoft Office X on my Imac with OS 10.6, I cannot get the Ctriilic font in office to work in word or excell. Where do I get the cyrillic font to work in word/excel
"Could you explain where you think you have to pay something?"
I signed up for the site and posted a question their response was that they had an answer and they required credit card imformation.
"If your problem is to read existing Excel files, then I am very surprised that OpenOffice would not open them. If you could send me one or provide a url I could see what the problem is (tom at bluesky dot org)."
I can down load the files just fine and they open. the numbers in the documents will display but text will not what I get is this : "__________" where there should be text.
Try this site and download the the Doc (rar). it will open on my computer as an excel file but there will be no text just "__________" Open office will not open this file, but excel will.
http://militera.lib.ru/h/sovaviation/index.html -
Get the control of an iMac through internet
Hello,
I want to get the control of an iMac through internet.
What is the solution ? Perhaps with Messages ? Configuration ?
Thank youHi,
iChat and Messages 7 in Mountain Lion could do this as the remote end could be set to automatically accept a video invite.
The basic Auto Accept (Apple)script for this does have words to exclude Screen Sharing from this (but you could edit those out and save the edit and new Script).
In Messages 8 in Mavericks you no longer have access to the abilities to Auto Accept the Video and Audio invites as Apple removed the Alerts preference pane in the Messages Preferences.
This means that auto Accept can only be linked to the Messages Received option in the General Section of the app's Preferences.
There is a App within the Mac OS that can use the Apple Remote Desktop client engine that all Macs have.
This is the bit in the System Preferences > Sharing that can be set for Screen Sharing.
You then use the Finder > Go Menu > Go to Server and start with VNC://xxx.xxx.x.x
This is simple on your Mac the other computers on your LAN as they all start with IP addresses behind your router.
If the Finder is showing Shares then the option button that says Screen Share also invokes this method.
You can use it over the internet.
The VNC address then has to be the contact's Public IP address and their router set up to forward the data to their computer on their LAN.
This is where apps like TeamViewer come into their own.
9:25 pm Saturday; December 7, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I participated in getting the free download of Mountain Lion for new Mac owners. It took me three days to finally get a code to do it and when I tried downloading it, the estimated time was 74 days 17 hours. Now an error occurred. What do I do? I am very frustrated and just want the great software to download in a resonalbe time!
Take your Mac to a location with a fast, relaible Internet connection that will be all yours during the duration of the download.
If you want to complain, PLEASE call Apple and do so.
Internet only downloads of OS X is completely stupid, it assumes everyone has reliable Internet everywhere and /or no data caps. -
How do u get the Ipod touch to group compilations for browsing ?
How do u get the Ipod touch to group compilations for browsing ?
With Itunes 9 like earlier versions u have the option to group compilations for browsing, having the effect of not putting a huge list of artists in your view by artist list because they played one song on a compilation you have got. With my old Ipod classic this option was also available through the setting menu. Meaning my ipod exactly mirrored my itunes lists.
I have recently purchased a ipod touch 32 and can find no settings that allow me to do the same. My artist list has risen from 200 to 400 because of this and makes finding albums by artists very annoying.
I have looked on the itunes software and can find no mention of syncing this ability to the ipod either.
Help
MikeYes i do this to group compilations in itunes.
But when i then sync to the ipod touch the albums come up under compilations as desired but the artists also appear in the artist list which is not.
On my old ipod classic it had a setting to group compilations the same as in itunes which would then remove these odd artists from the artist list.
I can find no equivalent setting on the ipod touch
Cheers
Mike -
How to get the name of a Data Element of a generic Table!
Hi guys!
In my function i have the following import paramenter
i_outtab type standard table
now i import a table and i want to get the dataelement of the fields.
is there a way to do this??Hello Thomas
Perhaps the following sample report may be useful for you.
*& Report ZUS_SDN_RTTI_STRUCT_COMPONENTS
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145711"></a>
*& Thread: How to get the name of a Data Element of a generic Table!
REPORT zus_sdn_rtti_struct_components.
TYPE-POOLS: abap.
TYPES: BEGIN OF ty_s_outtab.
TYPES: bukrs TYPE bukrs.
TYPES: kunnr TYPE kunnr.
TYPES: END OF ty_s_outtab.
DATA: gdo_data TYPE REF TO data.
DATA: gs_outtab TYPE ty_s_outtab.
DATA: go_typedescr TYPE REF TO cl_abap_typedescr,
go_structdescr TYPE REF TO cl_abap_structdescr,
go_datadescr type ref to cl_abap_datadescr.
DATA: gs_comp TYPE abap_compdescr,
gd_dtel type string,
gt_dfies type ddfields.
FIELD-SYMBOLS:
<gs_struct> TYPE ANY.
START-OF-SELECTION.
BREAK-POINT.
GET REFERENCE OF gs_outtab INTO gdo_data.
ASSIGN gdo_data->* TO <gs_struct>.
go_typedescr = cl_abap_typedescr=>describe_by_data( <gs_struct> ).
go_structdescr ?= go_typedescr.
BREAK-POINT.
LOOP AT go_structdescr->components INTO gs_comp.
go_datadescr = GO_STRUCTDESCR->GET_COMPONENT_TYPE( gs_comp-name ).
gd_dtel = go_datadescr->get_relative_name( ).
write: / syst-tabix, 'Data element =', gd_dtel.
ENDLOOP.
END-OF-SELECTION.
Regards
Uwe -
How to get the today's julian date in java?
how to get the today's julian date in java?
hi can any one tell me how to get the todays julian date using Calender class or GregorianCalender class....
Julian date for 2006.November.01 AD 05:54 PM : 2454041.0
i have tryied with
calJ.setGregorianChange(new Date(Long.MAX_VALUE));
System.out.println(sdf2.format(calJ.getGregorianChange()));
thanks
Tushar
Message was edited by:
lad_tusharthanks a lot....for intrest....
I have found some details about the Julian calendar as follows:
The Julian date for 2006: JAN: 01:12:01:59 is 2453737.00138
245 represent the year digits for year 2006
3737 represent the date fir 1 Jan
.00138 represents the time for 12:01:59
Julian date change as per every day 12 noon it increase one digit in it.
As per ref from
http://www.aavso.org/observing/aids/jdcalendar.shtml
Also chk this calendar where Julian date is 20. October 2006 for 02 November 2006
As per ref from
http://www.calendar.sk/julian_calendar-en.php
I have tried the pure �GregorianCalendar� class from jdk1.4 API and its setGregorianChange method but not getting as per the expected Julian date format. Using the �setGregorianChange()� i have setting the cutover date to Long.MAX_VALUE it means GregorianCalendar now have to act as per the Julian calendar ...so after setting the cutover date it return me changed date using �getGregorianChange()� but that was not the Julian date of the current date...as expected or as per above both scenario. Even though the last two digits are nowhere equal to the actual Julian date.
Program
GregorianCalendar cal = new GregorianCalendar();
cal.setGregorianChange(new Date(Long.MAX_VALUE)); // setting the calendar to act as a pure Julian calendar.
// cal.set(Calendar.DATE, new Date().getDate()); // seting the current date
// Date todayJD = cal.getGregorianChange(); // getting the changed date after the setGregorianChange
Date todayJD = cal.getTime(); // getting the calculated time of today�s Julian date
SimpleDateFormat sdfJulianDate = new SimpleDateFormat("yyDDD");
SimpleDateFormat sdfJuliandayOfYear = new SimpleDateFormat("DDD");
System.out.println("today Date = " + new Date());
System.out.println("Today as julian date = " + sdfJulianDate.format(todayJD));
System.out.println("Today as day of year = " + sdfJuliandayOfYear.format(todayJD));
OUTPUT:
USING : Date todayJD = cal.getGregorianChange();
Today Date = Thu Nov 02 15:17:05 IST 2006
Today as julian date = 94229
Today as day of year = 229
USING : cal.set(Calendar.DATE, new Date().getDate());
Today Date = Thu Nov 02 15:19:22 IST 2006
Today as julian date = 06319
Today as day of year = 319
USING : Date todayJD = cal.getTime();
Today Date = Thu Nov 02 15:17:59 IST 2006
Today as julian date = 06306
Today as day of year = 306
There is one another concept i found to get the Julian day of the year as per the Julian day chart mention on nasa site (http://angler.larc.nasa.gov/armsgp/JulianDayChart.html) and i m getting the moth of the year that is 306 for nov 02 2006 using getTime() method in above code then the out put is right for Julian day. But it was not as per the expected Julian date format. So in conclusion we can only able to retrieve the day of year for the Julian calendar. hope their will be a solution for this problem in java api ....else we allways have to depend upon the third party api that was not accepteble some times.....
Kindly chk chart on the site
http://angler.larc.nasa.gov/armsgp/JulianDayChart.html
http://weather.uwaterloo.ca/julian.html
http://www.fs.fed.us/raws/book/julian.shtml
Thanks,
Tushar Lad -
why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.
The created program is not performing a command I have written when it tries to connect to the internet, it must be Labview that is doing it. How do I stop this from happening?
Any help would be very appreciated.It looks that way..
"When LabVIEW starts it contacts the service
locator to removes all services for itself. This request is triggering
the firewall.This is done in case there were services that were not
unregistered the last time LabVIEW executed- for example from VIs that
didn't clean up after themselves"
This is not yet fixed in LV2009.
Message Edited by Ray.R on 11-04-2009 12:25 PM
Maybe you are looking for
-
Can't install or uninstall iTunes
Background: A few weeks ago my computer locked up at the "Welcome" screen. Took it to a local place for service. They were able to say it was a Windows problem. They explained that there was a possiblity that computer would have to be reformatted, an
-
I am using WLSS 3.1-MP1. I have couple of doubts regarding work managers wlss.timer & wlss.transport. 1. Minimum Threads Constraint : Weblogic documentation says "+The minimum number of threads allocated to resolve deadlocks+". Does it mean that thes
-
I am trying to set WHO columns in an Oracle APPs custom form. I tried fnd_standard.set_who bit gives an error, cannot insert null into creation date; i tried just setting it to USER but gives pre insert error -ora06502 is there any other way to set W
-
Isight is not working on ichat and skype, however will work on photo booth and imovie.
My isight will not work on ichat or skype, saying that there is no camera connected. isight will work in photo booth and imovie. It shows up in the system profiler. Have tried resetting SMC. Help?
-
I have one query about table entries.
i have one query about table entries. suppose for particular table we maintained 5 entries in dev server. actaully in the dev we have only these 5 entries. In production we have 200 entries actually. If we move the cts from dev to production ,we