Get the filter value in the Modify Table interface

Dear Colleages,
I use a Table Interface in order to get aditional values in a web template from a table, but I need the filter value used in the query.
I can get it with "get parameter" sentence:
GET PARAMETER ID '/BI0/OCALMONTH' FIELD MES1
But I cannot when I have a filter instead of a variable, it doesn't work using a variable without "manual entry" option.
¿How can I get this filter value?
Regards,
Jose

Hi Jose,
Use method get_state_infos (http://help.sap.com/saphelp_nw04/helpdata/en/32/ab3a3c24b4a00ae10000000a11402f/frameset.htm)
The dynamic filters are in e_t_slicer.
If this a a static filter or a variable, you can find them in e_t_txt_symbols.
Heike

Similar Messages

Data Transfer Process filter: how to view the filter values?

Hi,
does anyone know how to view (and download) the values of a filter of data transfer processes?
I want to compare the filtervalues of data transfer processes from productive system with development system. Normally the DTP's are created in a development system and transported with TMS to quality and productive systems. In the productive system there is often the need to slightly change the values in the filter, and to do this directly in the productive system without transport.
If the same DTP is used and changed by another project after a while, it will overwrite the changes from productive maintenance.
By comparing the filter values one could evaluate the changes.
For info packages there is the same need. Here you can use table RSLDPSEL. Is there someting like that for DTP?
thanks for any help
Jean

Hi,
the difference you have in the infopack and DTP is
you can have any number of infopackages between the source and PSA but you can have only one DTP between the PSA and datatarget.
so there is no othere way than changing the filter values in the existing DTP.
just chk the filter option and choose the required chars for ur load and activate the DTP.
Ramesh

ES_CRM_PARTNER_REDETERMIN* with the filter value *BUS2000223

Hi,
I have a requirement in which i have to create a Service Request and enter some particular Account ID for it through which any particular Account is assigned to the partner function "Account owner " automatically.
Then again before saving the user changes the Account ID entered before to some other.As for this Partner Determination settings has been done in the spro.But now the partner function "Account Owner" is not changed accordingly.
To make this happen i implented an Enahncement Spot ES_CRM_PARTNER_REDETERMIN with the filter value BUS2000223.
But this implementation is not getting triggered, it triggers only once the first time when we try to create a Service request.And teh partner determination is not working.
Please, suggest regarding the same.
Cheers,
Sharad

Hello,
partner re-determination is only available since crm 6.0.
Please see the online documentation which explains this at:
http://help.sap.com/saphelp_crm60/helpdata/en/d4/a8f6967c4b46b2bc2c20283a245199/frameset.htm
Normally it works only for BUS - types which are maintained in table (these entries are also supported)
COMS_PARTNER_DET:
BUS2000108
BUS2000111
BUS2000230
BUS2000231
BUS2000311
BUS2000312
Hence at least you have to maintain the BUS2000223 in the table, but I am not sure if it will work.
Regards
Rene

Format the total value in the column of the graph table

Hello all,
I have a graph table and I need to format the total value in the column of the table.
I am trying to find my table bean with the code below but it's not working in the processRequest. Is there anything else that should be done?
// Get the graph
OAGraphTableBean graphBean = (OAGraphTableBean)webBean.findChildRecursive("MyGraph");
// Get the table
OATableBean tblBean = (OATableBean)graphBean.findChildRecursive("MyTable");
The tblBean is null in the processRequest. In the processFormRequest the tblBean is not null.
Thanks and Regards,
Andrea

Hi,
The code OAGraphTableBean graphBean = (OAGraphTableBean)webBean.findChildRecursive("MyTable"); does not work because in this case I am getting the table but casting to a graph.
The MyTable bean is a child of MyGraph.
When creating a graph bean we have the option to create a table as a child (select your graphTable region in the Structure pane, and choose New > tabularFormat - to create the table).
The table bean child I can get just in the processFormRequest, but the graph I can get in both processRequest and processFormRequest.
I need to get the table bean in the processRequest to format the total value column.
Do you know if is there anything else that should be done to format the total column?
Thanks and Regards,
Andrea

Need to get the selected values from the selectManyShuttle

Hi,
I am using ADF11g newer version.
I have a selectManyShuttle and a command button. Need to insert all the selected values on the right hand side of the selectManyShuttle into a database table.
I created the selectManyShuttle with the values. Need help in getting the values on the right hand side.
<af:selectManyShuttle value="#{bindings.UserMgmtVO1.inputValue}"
id="sms2">
<f:selectItems value="#{bindings.UserMgmtVO1.items}"
id="si6"/>
</af:selectManyShuttle>
Any sample code or link is really appreicated.
Thanks

Thanks for the reply.
I am using a View Object and I dropped it as SelectManyShuttle
<af:selectManyShuttle value="#{bindings.UserMgmtVO1.inputValue}"
id="sms2"
valueChangeListener="#{POBacking.getSelectedValues}"
valuePassThru="true"
autoSubmit="true">
<f:selectItems value="#{bindings.UserMgmtVO1.items}"
id="si6"/>
</af:selectManyShuttle>
public void getSelectedValues(ValueChangeEvent valueChangeEvent) {
System.out.println("Testing Shuttle");
ArrayList list = new ArrayList(Arrays.asList(valueChangeEvent.getNewValue()));
String val = "";
String sqlStmt = "";
try {
if (list != null) {
for (int i = 0; i < list.size(); i++) {
int l = list.size() - 1;
val = list.get(l).toString(); //returns , delimited string
System.out.println(" value:" + val);
if (val != null) {
val = val.replaceAll("[\\[\\]]", ""); //remove []
StringTokenizer st = new StringTokenizer(val, ",");
int nto = st.countTokens();
for (int j = 0; j < nto; j++) {
String users = st.nextToken().trim();
System.out.println("Users:" + users);
//sqlStmt = " update xxpp_project_clip set clip_status='true', clip_seq = "+j * 10+
// " where project_id = "+rHdr.getAttribute("ProjectId") +
// " and clip_name ='"+ clip_Name +"'";
//System.out.println("sqlStmt:" + sqlStmt);
//stmt.executeUpdate(sqlStmt);
//am.getDBTransaction().commit();
//if (stmt != null)
// stmt.close();
// am.getDBTransaction().commit();
} catch (Exception ex) {
ex.printStackTrace();
I don't see the values in the list.
I gets printed as
value:[Ljava.lang.Integer;@1b10691
Users:Ljava.lang.Integer;@1b10691
how to get the individual values in the list?
Thanks
Saru

How to use the prompted value in the filter expression

Hi
Is it possible to use the prompted value in the filter expression?
My requirement is that user will be prompted for a date field and I need to filter the records such that the records are displayed for the last 5 weeks from the date entered by the user.
If somehow I know how to use the prompted value in the filter expression then this requirement is easy to be done. If this is possible, please guide me?
If there are other ways to acheive the desired results then please suggest.
Thanks
-Jaz

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

Unable to select the filter value after query execution

hi,
I am unable to drill down my keyfigures.
1.i have a lC and GC values out of which GC is hidden so after the query execution i would like to filter my value between GC and LC but i do get only LC value in the filter and i do not get GC value to select .
Could any one tell me how this can be done.this is very urgent.
Thx
Subha

resolved on my own,so i am closing this.
Thx
Subha

Select the filter value display "No Entries Found"

Hi All,
I have a problem with the bex query. Query is built on a multiprovider.
I am using restricted key figure with constant selection checked for the characteristic that is available only in one cube.
Because of this when I right click and select Filter values on the free characteristics from the report, I get (No Entries Found)
If I remove constant selection from the key figure, report works fine.
Can someone help with a solution;
Thanks,
Biju

Assuming your data is coming from only one cube...
Drag 0INFOPROV in your Filter and restrict it with your your Cube
You can find 0INFOPROV in Dimensions under Data package
Hope this helps.

How to capture the selected values of the filter?

Hi Everybody
I have created a dashboard using a 4 column filter. It all works well - no problem.
I now need to enhance the functionality of the dashboard which needs the selected values of each of the parameters of the filter. As far as I know, the selections of the fiilter columns are not "Inserted In" any cell, only the data values of the corresponding row not including the filter columns are inserted in the "Inserted In" row, is there a way to capture the values of the filter column selections in some cells on the spreadsheet?
An early response from you all shall be highly valued.
Also, does anyone know which is the current equivalent version of Xcelsius to the old Xcelsius Workgroup version. This Xcelsius Workgroup version supported the "XML Integration Dynamic Refresh" wherein you didn't have to reinserted the updated Excel spreadsheet into Xcelsius have an updated dashboard - as long as the corresponding XML files were updated with the latest data, the exported dashboard would refresh.
Best regards
Deepak Agarwal

Along with the PBO and PAI event, add a POV event in the flow logic of the screen
DEMO_DROPDOWN_LIST_BOX -is a good demo example.
PROCESS ON VALUE-REQUEST.
FIELD structure_name-field_name MODULE create_dropdown_box.
In the report :
MODULE create_dropdown_box INPUT.
SELECT carrid carrname
                FROM scarr
                INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'CARRID'
            value_org       = 'S'
       TABLES
            value_tab       = itab_carrid
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
ENDMODULE.
In the layout, assign a Function Code , for eg : 'SELECTED' to the listbox and lets say name of the field is SDYN_CONN-CARRID. So in the PAI module,
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'SELECTED'.
      MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
ENDCASE.
ENDMODULE.
sdyb_conn-carrid will contain your selected field

Modify the preference value of the default route

Hi
How to achieve the Below ? any configuration example?
1)How to modify the preference value of the default route to be less prefered than OSPF External route
2)how to redistribute the default route as type 2 external route
3)how to redistribute the default route as type 1 external route
thanks

Hi Ibrahim,
See below:
1) Can you elaborate on this a bit? Can you explain, specifically, what your trying to accomplish? I don't think you can get a default route into the OSPF RIB that is not external as the default is injected as a Type-5 LSA (e1 or e2). If your talking about getting a router to use the OSPF learned default over the default router learned via some other source (e.g. static, BGP, etc), then it depends on the source because of the Administrative Distance when comparing the two defaults ( the one default learned via OSPF has AD=110, and the other default is AD=X, where X is the Administrative Distance assigned to the protocol).
2) Use the "default-information originate metric-type 2" command under "router ospf" -- Note this is the default
3) Use the "default-information originate metric-type 1" command under "router ospf" -- Note, you don't need this in Totally Stubby Area.
4) For NSSA area you have to use the "area nssa <area_num> default information-originate metric-type <type>" router subcommand. Note your NSSA should have a Type-7 LSA for the default route
Rate if helpful.
Joe

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

How to get a field value in the report

hi all :-
i need to get the field value in the formate trigger inside a specified field in the report?

please post your request in the report category forum

Iam using a table in numbers to plot daily graph lines. If I fill a cell with a text box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is tho

I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?

The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
For the example, the values list for the pop-up menu was:
5
3
1
Choose
-1
-3
-5
The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
Regards,
Barry

How to directly get the selected value in the dropdown

Hi Experts
    Now, in POV, i want to directly get the selected value in the dropdown. Because, the program doesn't enter the PAI before POV part. Therefore, the corresponding variable of dropdown doesn't store the selected value. That's reason why i want to find a way to directly get the selected value in the dropdown. is there any function module to do this?

you can use INITIALIZATION event which triggers first before any other events..
and u can use VRM_SET_VALUES to populate the values in the list
DATA : v TYPE vrm_values.
DATA : vw LIKE LINE OF v.
INITIALIZATION.
vw-key = '1'.
vw-text = 'ABC'.
APPEND vw TO v.
vw-key = '2'.
vw-text = 'DEF'.
APPEND vw TO v.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = 'A'
      values          = v.
PARAMETERS : a TYPE c VISIBLE LENGTH 10 AS LISTBOX.

How to get the old value of the ValueChangeEvent

I'm using the JSF component selectManyListbox. I have assigned a value change listener to it. When I try get the old value using getOldValue() of the ValueChangeEvent Im always getting a null value. The only value Im getting is from the method getNewValue(), which is the last item I clicked in the selectManyListbox items before submitting the whole form. Is there a way to get the old value of this component or Im doing something wrong?

Here is the partial bean code
public class TestUI extends PageCodeBase {
     private static Logger logger = Logger.getLogger(pagecode.protected1.TestUI.class);
     protected Object [] menuValue;
     protected Object [] listBoxValue;
     protected List allTaskCodes;
     * @return Returns the listBoxValue.
     public Object[] getListBoxValue() {
          return listBoxValue;
     * @param listBoxValue The listBoxValue to set.
     public void setListBoxValue(Object[] listBoxValue) {
          this.listBoxValue = listBoxValue;
public void handleSelectManyListboxValueChange(
               ValueChangeEvent vce) {
          logger.debug(".. first component was heard..");
          String[] s1 = (String[]) vce.getOldValue();
          String[] s2 = (String[]) vce.getNewValue();
          //vce.getComponent().
          if (s1!=null&&s1.length!=0) {
               logger.debug("length of first array is " + s1.length );
          //for(int i=0; i<s1.length; i++)
                    logger.debug("value of old is " + s1[0] );
          if (s2!=null&&s2.length!=0) {
               logger.debug("length of second array is " + s2.length );
               //for(int i=0; i<s1.length; i++)
                    logger.debug("value of new is " + s2[0]);
Here is the jsf code
<h:selectManyListbox styleClass="selectManyListbox" id="listbox1"
                    size="3" valueChangeListener="#{pc_TestUI.handleSelectManyListboxValueChange}"
onchange="submit()" value="#{pc_TestUI.listBoxValue}">
<f:selectItem itemValue="value1" itemLabel="select1" />
                    <f:selectItem itemValue="Value2" itemLabel="select2" />
                    <f:selectItem itemValue="Value3" itemLabel="select3" />
<f:selectItem itemValue="value4" itemLabel="select1" />
                    <f:selectItem itemValue="Value5" itemLabel="select2" />
               </h:selectManyListbox>

Get the filter value in the Modify Table interface

Similar Messages

Maybe you are looking for