Get the session trace files and also the TKPROF reports for storedprocedure

Hi ,
I am trying to find out the bottlenecks on a storedprocedure, which does a insert into a table, where the target table has lot of indexes/constraints, so i want to see, which indexes/constraints is causing the problem. so in order to do I want to get the session trace files and also the TKPROF reports to see the bottlenecks for a oracle stored procedure,
Could you please give us the list of steps to get the tracefiles and tkprof reports.

781649 wrote:
Thanks for input, i am using oracle10g standard edition. i dont think i have these tools available (DBMS_PROFILER or DBMS_HPROF). Did you even bother to try the following?
SQL> DESC DBMS_PROFILER
SQL> DESC DBMS_HPROF
I understand it would be too much to expect you to actually Read The Fine Manual
I am using bulk collect for all in my storedprocedure to insert the rows into a big table. In order to perform analysis on this bulk collect which tool will help me to identify the bottlenecks .
I want to compare background session properties for both runs (like inserting the data with indexes/constraints vs without indexes/constraints). please let me know..I am willing to bet you the problem/slowness is on the SELECT side & not the INSERT!
Just Curious
Handle:      781649
Status Level:      Newbie
Registered:      Jul 12, 2010
Total Posts:      35
Total Questions:      17 (14 unresolved)
Why so many unanswered questions?
Edited by: sb92075 on Jan 17, 2012 3:13 PM

Similar Messages

I have no contacts in my outlook contacts file, only in the icloud contacts file and also the same for the outlook calender. I need to synch with a blackberry for both, how do i restore it back?

I have just set up icloud but now have no outlook contacts or calander, only icloud contacts and calender. I need to synch both to a blackberry so how do i restore the original contacts and calander so I can I can synch normally again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.

I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.

Thank you - that all makes sense. It is, indeed, exactly what I did when I upgraded.
I'm also writing this on the machine that crashed a few minutes ago (I posted the crash in another thread). I got back with a 'safe boot' - as I have done a few times before.
I've also de-installed little snitch (and then done a safe-boot & then re-boot ) since that seemed involved. I de-installed Adobe flash, since that seemed to be a problem - I then re-installed the later, apparently fixed, flash. The most recent crashes don't seeme to have a problem with flash any more.
I've posted the various ( generally different ) crashes. I also posted a summary of the similar lines that turn up in most of the crashes.
Unfortuantely, I'm actually trying to use the machine to meet some urgent deadlines and all this is not making it at all easy.
I had had great hopes for 10.7.2 - I thought that the crashes must be pretty common, so would have a common aetiology. There do seem to have been some fundamental changes to the file sytem and to the video interface (that seems to cause problems to brand new iMacs as well as to my 2009 iMac).

HT201328 When I unlock can i use both the AT&T SIM and also the new carrier which I got unlocked to

If I unlock through AT&T can I use both AT&T carrier as well as the new carrier

as one of the other repliers indicated (implicitly) - you can complete the unlock using your original sim card - to complete the unlock you have to restore the phone in itunes - if its unlocked you should get a message from itunes that says
Congratulations your iPhone is now unlocked
but the only way you will really know it worked is to use a different sim card
that what i did - i
1) restored the iPhone with the original sim card and got the congratulations message
2) installed a pre-paid sim card from another carrier and made an received a phone call

TS1702 I am updating my IPAD to version 5.1 and the update has stopped before completion. What is the procedure. If I stop the update or restart the IPAD will the update be corrupted and also the IPAD operating system.

I am updating a new IPAD to the latest version from ITUNES. The update is not complete and has stopped. What is the procedure to restart? If I close ITUNES i get a message that the IPAD is updating. Will closing the application cause the update to be corrupted and thus the operating system? Will the same occur if I power the IPAD down or disconnect it vis the USB port?
Help!!!

routnom wrote:
AppleWill - when i closed the app and restarted Itunes, I had to go thru a Restore process. The restore goes to certain point and stops. It seems at the same time as the Update stopped. I can Force a stop and reboot the computer and try again. It possible the screensaver interrupted the restore? It doesn't sound right. Any suggestions?
You may also want to go to:
~/Library/iTunes/
This is done by going to the "Go" in the Finder and select Go To Folder. Copy and paste:
~/Library/iTunes/
In to Go To Folder selection. Look for a folder called iPad Software Updates. Delete anything in that folder and re download the upadate.

I am having problem with my games application...non of the game run smoothly and also the games close automaticially

I am having problem with my games application... no idea where is the problem. non of the game run smoothly 1st in 1st its hard to open the apps in it open than also it will close automatically. Please help me out

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..
If necessary...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

TS1394 My pictures file is locked. Don't have permission to access iPhoto library after Yosemite upgrade. How do I dump the new Pictures file and restore the old?

Just upgraded to Yosemite 10.10.1 iPhoto gives me a permissions error when I try to access the photo library. When I track down the "Pictures" folders, the new "blessed" Pictures folder (with camera on the folder) is empty. The previous Pictures folder, now a generic folder named "Pictures" is found at MacHD>Users>Guest, with a no access red circle/white bar in the lower right corner. Get info tells me that "Guest" has read/write privileges, but not me, logged on with administrator password. Logging in as "Guest" does no good, the folder is no longer findable. Disk Utility Permissions repair and restart, both as Guest and with the administrator password are fruitless. I cannot alter the locked Pictures folder. Will moving the "blessed" pictures folder to the trash and restarting possibly fix this? If not, then how? Thanks.

Try holding alt or option key when starting iPhoto to choose a new Library.

I need the ASD 3S144 image and also the ASD 3S146 image.

Hi,
I have many Apple desktops and laptops, I need the URL to the ASD 3S138, the ASD 3S144, the ASD 3S 146 and any of the 150's series ASD.
I've bought about $100,000 of Apple computers over the last 10 years, I think I deserve to be able to diagnosis them with FREE DIAGNOSIS IMAGES, on my own. So could someone give me the URLs so I can download the diagnosis EFIs? Thanks. I'm sure glad Apple isn't too fascist to stop me from figuring out what'w wrong with the Macs they sold me,... that their Stores won't work on, calling them 'vintage'... thanks again.

Please understand that these forums are composed of Apple users and not Apple employees. You will have to contact Apple directly regarding your request;
http://www.apple.com/contact/
Ciao.

HT1391 what is the command to copy and also the command to paste?

What is the command to copy and paste something?

In Mac OS X, press the Command and C or V keys.
(87331)

Want to Read the a txt file and put the data into the table colums.

I have a text file in which data is piped separated and I want to put the data in the table column.
Eg.
Text File Column
First_name|Last_name|address|phone_number
Database table:
first_name ,last_name,address,phone_number
It's very urgent.
Thanks For your help in advance.
Himanshu

Use sqlldr or external file.
See http://download.oracle.com/docs/cd/E11882_01/server.112/e10701/part_ldr.htm#i436326 for SQL Loader.
See http://download.oracle.com/docs/cd/E11882_01/server.112/e10595/tables013.htm#ADMIN11705 for External table.

TS1702 i am not able to open the Facebook app in my iPad 1, the software is updated and also the Facebook app is up to date still not able to open

i am not able to open the Facebook App in my ipad
i have updated the faceb ook app still not opening kindly advice

Have you tried giving your iPad a reset? Hold down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. let it reboot and try again.

I have an imac.. Ive already bootcamped it.. The keyboard is okey and also the mouse in windows.. But i cant still use the internet..

Imac desktop

I would highly recommend you run a test by trying another mouse with the iMac and see if that fixes it. That would tell you the problem is Not with the iMac itself.
Hope this helps

My I Mac has a pink cloud in part of the grey top bar and also if I leave it with safari or mail open when I come back to it it has closed these down and I have to re open

My I Mac has developed a pink cloud in part of the grey top bar and also if I leave for awhile with Safari or anything else left on when I return it has closed these down and I have to re open them, has anybody got any ideas how to cure these problems if possible.

For FaceTime try the troubleshooting advice given here:
http://support.apple.com/kb/ts3367
Also try resetting your iPad:
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

How to read the source file and copy the entire content to the target Database field

Hi All,
PI system extracts the actual business content from the incoming attachment file and copy the entire format to the target Database field which is a blob data type field.
Sender Adapter: SOAP
Receiver Adapter: JDBC
JDBC Structure
Can we achived the above requirement by using UDF with out Java Mapping?
Thanks,
Mahi.

Ok, in this case yo can use the conten converion of the file adapter. Therefore you first need to create a Datatype in ESR with the required structure
Then in your file adapter you need to use this datatype and its required fields:
The Datatype then can be used as usual within you mapping.
regards
Christian

Error executing the Query after deploying and executing the application in WLS 6.1 SP3

Hi,
We are trying to run a application by deploying a war file on Web Logic Server
6.1 SP3. After deploying and at the time of execution of the application, the
server console displays this error message
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
[0], [], [], [], [], [], []
While debugging thru the application we found that this error comes at the time
of execution of the query thru the Statement.executeQuery method of java.sql.Statement
class.
This same application when deployed on Web Logic Server 8.1 runs perfectly, without
any hitches.
Please, provide me the solution to this asap.

Look for sometime around November. No exact date.
Eric
"Dominic Tulley" <[email protected]> wrote in message
news:[email protected]..
Thanks Eric,
you know what I'm going to ask next right?
Any ideas when SP4 comes out?
Cheers,
-Dominic
"Eric Gross" <[email protected]> wrote in message
news:[email protected]..
The next version of Apache that we will support will be 2.0.42/2.0.43
and
the module for that will be included in the next Service Pack for6.1(SP4)
and 7.0(SP2).
The problem with Apache 2 is that when a new release comes out a newmodule
needs to be compiled. Most of the time. For 2.0.42/2.0.43 this is notthe
case.
Regards,
Eric
"Dominic Tulley" <[email protected]> wrote in
message
news:3da3f246$[email protected]..
I'm trying to set this up (initially just apache in front of a single
WLS
server but ultimately I want to put it in front of a cluster).
I've installed Apache 2.0.40.
I've copied the mod_wl_20.so file into the apache modules folder.
I've edited the httpd.conf file and added the line:
LoadModule weblogic_module modules/mod_wl_20.so
When I run apache -t to check the configuration I get the following:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache
Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.sointo
server: The specified procedure could not be found.
So what's going on here?
Looking at previous postings it sounds like there's an issue with
versions
of apache after 2.0.39 but I can't find a download for that version.Also,
it sounded like the issues were for WLS 7, not 6.1. Can this work
with
2.0.40 or am I wasting my time?
If I get the mod_wl_20.so from dev2dev I get the "incompatible plugin"
message that has been mentioned in this group already.
Any suggestions appreciated,
-Dominic

Get the session trace files and also the TKPROF reports for storedprocedure

Similar Messages

Maybe you are looking for