Error executing the Query after deploying and executing the application in WLS 6.1 SP3
Hi,
We are trying to run a application by deploying a war file on Web Logic Server
6.1 SP3. After deploying and at the time of execution of the application, the
server console displays this error message
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
[0], [], [], [], [], [], []
While debugging thru the application we found that this error comes at the time
of execution of the query thru the Statement.executeQuery method of java.sql.Statement
class.
This same application when deployed on Web Logic Server 8.1 runs perfectly, without
any hitches.
Please, provide me the solution to this asap.
Look for sometime around November. No exact date.
Eric
"Dominic Tulley" <[email protected]> wrote in message
news:[email protected]..
Thanks Eric,
you know what I'm going to ask next right?
Any ideas when SP4 comes out?
Cheers,
-Dominic
"Eric Gross" <[email protected]> wrote in message
news:[email protected]..
The next version of Apache that we will support will be 2.0.42/2.0.43
and
the module for that will be included in the next Service Pack for6.1(SP4)
and 7.0(SP2).
The problem with Apache 2 is that when a new release comes out a newmodule
needs to be compiled. Most of the time. For 2.0.42/2.0.43 this is notthe
case.
Regards,
Eric
"Dominic Tulley" <[email protected]> wrote in
message
news:3da3f246$[email protected]..
I'm trying to set this up (initially just apache in front of a single
WLS
server but ultimately I want to put it in front of a cluster).
I've installed Apache 2.0.40.
I've copied the mod_wl_20.so file into the apache modules folder.
I've edited the httpd.conf file and added the line:
LoadModule weblogic_module modules/mod_wl_20.so
When I run apache -t to check the configuration I get the following:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache
Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.sointo
server: The specified procedure could not be found.
So what's going on here?
Looking at previous postings it sounds like there's an issue with
versions
of apache after 2.0.39 but I can't find a download for that version.Also,
it sounded like the issues were for WLS 7, not 6.1. Can this work
with
2.0.40 or am I wasting my time?
If I get the mod_wl_20.so from dev2dev I get the "incompatible plugin"
message that has been mentioned in this group already.
Any suggestions appreciated,
-Dominic
Similar Messages
-
Image disappears in the RH after saving and reopening the report
Hi,
I am using CR2008.
I have created several reports with images but didn't get this type of problem.
I inserted image in the Report header and everything is fine, after save and exit if I reopen the report there is no image. It disappeared. I tried all possible ways with bmp, jpg formats of image and re-size the image. Still same problem. There is a blank OLE Object in the Report header when I reopen it. Is there any solution for this issue?
Thanks!
Edited by: Krishna.R on Jun 10, 2011 10:02 PMHi
Thanks for the reply. My problem is solved. The image file is too big in size and I resized it in crystal, that's why it behaved wiered. I reduced the size of the image outdide the crystal report in mspaint and then copied to crystal. It worked. -
Hi all,
I'd deployed and executed a mapping in control centre. It is sucess.
Where can I see (in which metadata table of owbsys) the details of the mapping name, execution Id, Status of the Execution etc will be stored.Hi,
login with OWB repository user and try following query.
you will get every thing about executions like execution details,execution messages,map runs,map run errors,step run
select * from ALL_RT_AUDIT_MAP_RUN_ERRORS order by created_on desc
select * from ALL_RT_AUDIT_STEP_RUNS order by created_on desc
select * from ALL_RT_AUDIT_EXECUTIONS order by created_on desc
select * from ALL_RT_AUDIT_EXEC_MESSAGES order by created_on desc
select * from ALL_RT_AUDIT_MAP_RUNS order by created_on desc
select * from ALL_RT_AUDIT_MAP_RUN_TRACE order by created_on desc
select * from ALL_RT_AUDIT_EXECUTION_PARAMS where execution_audit_id='<your execution audit id>'
select * from all_rt_audit_map_runs
select * from all_rt_audit_map_run_sources
select * from all_rt_audit_map_run_targets
select * from all_rt_audit_step_runs
select * from all_rt_audit_step_run_targets
select * from all_rt_audit_step_run_sources
Thanks,
Sutirtha -
Hi All,
i have used CMS in SQL 2008 R2. i have added couple of servers in its group. i have executed a query & i need to send the query output in the form of email.
basically query is checking the rows count from couple of user tables in servers.
issue here is how to copy the data that is used by CMS? i need to work on automate the rows count in difft user table in db servers
could you please suggest how can i achieve this?Copy to what?
SELECT COUNT(*) FROM sys.objects
Running the above statement returns two columns (server name and count)
All the servers SS2005 and onwards , then use
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'name',
@recipients = '[email protected]',
@query = 'SELECT COUNT(*) FROM sys.objects',
@subject = 'Count rows'
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.
A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert -
How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again?
Make sure iTunes on the computer is logged into the account on the phone.
Plug the iPhone in.
In the popup window warning about wiping your phone, hit cancel.
In the left pane of iTunes, the phone icon should be there.
Right click on it, select transfer purchases.
Note: this will only transfer music bought from iTunes. Not mp3's from amazon or ripped from CD's. -
We are getting the below error when we see in Crawl logs
"The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error."
This is happening in FAST search.
Here I can see soke of the logs related to this search crawl.
Could anyone please help on this?
web application 'http://xvy/' doesn't use search application 'FAST Query SSA', skipping it.
ABC\sp_search' on web application 'http://xvy/'. 2d7dba01-3d2e-4903-b59f-9a8601627bcd
07/30/2014 01:30:46.65 OWSTIMER.EXE (0x28DC) 0x1BC0 SharePoint Server Search Administration
dl2m Verbose Search application 'Search Service Application 1': Skipping web application '48ed7882-9f70-424e-bf72-e3c9f5340b97' because its outbound url 'http://ebc:30347' was automatically added once.
Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcp/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' because its outbound url 'http://nvcp' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcp' for web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABc\sp_search' on web application 'http://nvcp'ext/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '64d562a1-535e-4917-8979-88840e2a67fe' because its outbound url 'http://nvcp'ext' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcpext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcpnew/'. 85041609-d618-4132-ac8e-195a910d99a0
executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.31 mssearch.exe (0x0588) 0x1DE4 SharePoint Server Search Propagation Manager
e3o3 Verbose executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.68 mssdmn.exe (0x15CC) 0x1060 SharePoint Server Search HTTP Protocol
Handler du4i 0x29E4 SharePoint Server Search HTTP
Protocol Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x29E4 SharePoint Server Search HTTP Protocol
Handler du54 High CHttpAccessorHelper::InitRequestInternal - unexpected status (503) on request for 'http://ppecpnew/robots.txt' Authentication 0. [httpacchelper.cxx:703]
d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssearch.exe (0x0588) 0x130C SharePoint Server Search Gatherer
cd11 Warning The start address http://nvcp'/sites/quipme cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details:
The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error. (0x80041200)
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x104C SharePoint Server Search HTTP Protocol
Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x104C SharePoint Server Search HTTP Protocol
Handler du54 High
07/30/2014 01:32:04.70 mssearch.exe (0x0588) 0x2948 SharePoint Server Search Gatherer
cd11 Warning The start address
http://nvcp'/sites/MDPPubng cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details: The crawler could not communicate with the server. Check that the server is
available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error. (0x80041200)
CHttpProbeHelper::ProbeServer: InitRequest failed for 'http://ppecpnew/_vti_bin/sitedata.asmx'. Return error to caller, hr=80041200 [stscommon.cxx:490] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvg0 High STS3::COWSServer::InitializeClaimsCookie: Probing url 'http://pncvr' failed. Return error to caller, hr=80041200 [sts3util.cxx:1332] d:\office\source\search\native\gather\protocols\sts3\sts3util.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
en0e High CSTS3Accessor::InitURLType: Return error to caller, hr=80041200 [sts3acc.cxx:2214] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dv3p High CSTS3Accessor::GetServer fails, Url sts4://pnvpr/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3acc.cxx:185]
d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvb1 High CSTS3Accessor::Init fails, Url sts4:/mngbv/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3handler.cxx:312]
d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x16FC SharePoint Server Search HTTP Protocol
Handler du2z Verbose CHttpProbeHelper::ProbeServer: Probing server with url 'http://pnvpr/_vti_bin/sitedata.asmx'. [stscommon.cxx:476] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvb2 High CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041200 [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC) 0x16FC SharePoint Server Search HTTP Protocol
Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/_vti_bin/sitedata.asmx'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
earch application 'FAST Query SSA': Adding start address 'http://mnvfgext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvpr/'. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' because its outbound url 'http://pnvpr' was automatically added once. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://pnvpr' for web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2k Verbose web application 'http://abcrsp/' doesn't use search application 'FAST Query SSA', skipping it. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2k Verbose web application 'http://excb/' doesn't use search application 'FAST Query SSA', ski
Anil LokaHi,
According to your post, my understanding is that you got error when communicating to the server.
This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
Ping <servername>
2. You should be able to connect to the server using telnet command
Telnet< servername> <port number>
More information:
Troubleshooting of FAST Search Configuration
If the issue still exists, you can delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Syntax error in ABAP query after implement patch
Dear All,
After implement patch from SAPKA46C39 to SAPKA46C53, we have syntax error in our query.
our SAP release version is 46C.
The error in query is -The data object "R01" does not have a component called "046" -
We don't found any SAP notes that match for our error.
Anyone ..please help...
Thanks a lot...
BuditutaHi,
The query generated is based on the table structures available as they are used, etc.
So please check if there is any difference in the fields available in the tables used, LDB used if any.
In addition, may be few of the properties of the SAP query and info set does not get copied properly.
and after activating the info set only, activate the query, etc...check them once again.
Regards,
Santhosh. -
While Deploying and running the application
Dear all,
While deploying and running the application, after importing the relevant files into my local amchine workspace from another machine, i am facinf exception/error message as below:
'Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found'.
Would someone suggest for the same.
With Regards,
Lux.Hi,
This is the message i am receving during runtime
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.0.3705; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4013.00.0000.20050607163945.0000 (release=630_SP_REL, buildtime=2005-06-07:21:12:54[UTC], changelist=351986, host=PWDFM067)
Web Dynpro code generators of DC local/SurveysOverview:
SapDictionaryGenerationCore: 6.4013.00.0000.20050606171348.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:02:28[UTC], changelist=351717, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4013.00.0000.20050609113138.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:05:41[UTC], changelist=352442, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4013.00.0000.20050606171700.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:56:40[UTC], changelist=351724, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4013.00.0000.20050628104636.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:21:22[UTC], changelist=356134, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4013.00.0000.20050628104636.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:21:22[UTC], changelist=356134, host=PWDFM026)
SapGenerationFrameworkCore: 6.4013.00.0000.20041104141254.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:55:55[UTC], changelist=298452, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4013.00.0000.20050606172055.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:09:17[UTC], changelist=351729, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4013.00.0000.20050606171352.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:59:56[UTC], changelist=351719, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4013.00.0000.20050606171700.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:56:48[UTC], changelist=351724, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4013.00.0000.20050606172055.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:09:46[UTC], changelist=351729, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows XP, version: 5.1, architecture: x86
Error stacktrace:
java.lang.NullPointerException
at com.sap.survey.NewSurveyView.onActionCreateSurvey(NewSurveyView.java:180)
at com.sap.survey.wdp.InternalNewSurveyView.wdInvokeEventHandler(InternalNewSurveyView.java:198) -
Convert this query to ABAP and display the results
Hi Everyone,
I have a sql query in native sql (oracle). I want execute it in ABAP editor and display the results.
I need to get this to an internal table and display the results. How do i write the script any help will be great use to me.
Here is the query:
<i> select (select decode(extent_management,'LOCAL','*',' ') ||
decode(segment_space_management,'AUTO','a ','m ')
from dba_tablespaces where tablespace_name = b.tablespace_name) || nvl(b.tablespace_name,
nvl(a.tablespace_name,'UNKOWN')) name,
kbytes_alloc kbytes,
kbytes_alloc-nvl(kbytes_free,0) used,
nvl(kbytes_free,0) free,
((kbytes_alloc-nvl(kbytes_free,0))/
kbytes_alloc)*100 pct_used,
nvl(largest,0) largest,
nvl(kbytes_max,kbytes_alloc) Max_Size,
decode( kbytes_max, 0, 0, (kbytes_alloc/kbytes_max)*100) pct_max_used from ( select sum(bytes)/1024 Kbytes_free,
max(bytes)/1024 largest,
tablespace_name
from sys.dba_free_space
group by tablespace_name ) a,
( select sum(bytes)/1024 Kbytes_alloc,
sum(maxbytes)/1024 Kbytes_max,
tablespace_name
from sys.dba_data_files
group by tablespace_name
union all
select sum(bytes)/1024 Kbytes_alloc,
sum(maxbytes)/1024 Kbytes_max,
tablespace_name
from sys.dba_temp_files
group by tablespace_name )b
where a.tablespace_name = b.tablespace_name order by 1;
</i>
Thanks,
Prashant.Hi Prashant,
Native SQL commands in ABAP are placed between EXEC SQL and ENDEXEC. You can place all your statements in between these EXEC SQL and ENDEXEC in a report.
EXEC SQL [PERFORMING <form>].
<Native SQL statement>
ENDEXEC.
Check this link to know about Native SQL
http://help.sap.com/saphelp_47x200/helpdata/en/fc/eb3b8b358411d1829f0000e829fbfe/frameset.htm
Thanks,
Vinay -
Can't work with the Query after I save a 3.5 Query in 7.0 Query Designer
Hello,
my Problem is, I open a 3.5 Query in a 7.0 Query Designer. Then I save as another name. When i Open the Query
i can't change things... WHY ? A Standart Transport is OK in RSA1, Transport, BexTransport. all ok..
can't work with the Query after I save a 3.5 Query in 7.0 Query Designer
Best RegadrsHi,
I cant click on it. It is grey..
I open the 3.x Query in a 7.0 Query Designer and save as another name.. Then I try to open it with the 7.0 tool. The Query is displayed. But I cant change something...
thnx -
Hi,
We are getting the following error when certain data driven subscriptions are fired off: "the query processor could not start the necessary thread resources for parallel query execution". I've read other posts that have the same error, and
the solution usually involves adjusting MaxDOP to limit the number of queries that are fired off in parallel.
Unfortunately, we cannot change this setting on our server for performance reasons (outside of data driven subscriptions, it negatively impacts our ETL processing times). We tried putting query hints like "OPTION (MAXDOP 2);" in the reports
that are causing the error, but it did not resolve the problem.
Are there any settings within Reporting Services that can be adjusted to limit the number of subscriptions that get fired off in parallel?
Any help is appreciated - thanks!Yes, that is correct. It's a painful problem, because you don't know which specific subscription failed. For example, we have a data driven subscription that sends out about 800 emails. Lately, we've been having a handful of them fail. You don't know
which ones out of the 800 failed though, even from the RS log files - all it tells you is that "the
query processor could not start the necessary thread resources for parallel query execution".
Thanks, I'll try changing <MaxQueueThreads> and will let you know if it works.
On a side note: I've noticed that it is only reports with cascading parameters (ex. where parameter 2 is dependent on the selection from parameter 1) that get this error message... -
I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?
I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?
-
Firefox has been crashing all the time after I updated to the newest version. I tried to uninstalled firefox and all addons. Restarted the computer to reinstall Firefox and it's still crashing all the time. Please help.
https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_get-help-fixing-this-crash
Type '''about:crashes''' in the URL bar and hit Enter. <br />
Click the hyperlinks to bring up the Crash Report pages and copy'n'paste the URL of each of those reports into the message box here. We'll see if we can help you figure out what is causing those crashes to happen. -
I need to pass a query in form of string to DBMS_XMLQUERY.GETXML package...the parameters to the query are date and varchar ..please help me build the string .Below is the query and the out put. ( the string is building fine except the parameters are with out quotes)
here is the procedure
create or replace
procedure temp(
P_MTR_ID VARCHAR2,
P_FROM_DATE IN DATE ,
P_THROUGH_DATE IN DATE ) AS
L_XML CLOB;
l_query VARCHAR2(2000);
BEGIN
l_query:= 'SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
||'mi''), ''00:'
||'00'',''24:'
||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
||'mi'')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = '
||P_MTR_ID||
' AND s_mtrch = ''1''
AND s_datetime BETWEEN TO_DATE('
||P_FROM_DATE||
',''DD-MON-YY'') AND (TO_DATE('
||P_THROUGH_DATE||
',''DD-MON-YY'') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = '
||P_MTR_ID||
' AND s_mtrch = ''2''
AND s_datetime BETWEEN TO_DATE('
||P_FROM_DATE||
',''DD-MON-YY'') AND (TO_DATE('
||P_THROUGH_DATE||
','' DD-MON-YY'') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)';
SELECT DBMS_XMLQUERY.GETXML('L_QUERY') INTO L_XML FROM DUAL;
INSERT INTO NK VALUES (L_XML);
DBMS_OUTPUT.PUT_LINE('L_QUERY IS :'||L_QUERY);
END;
OUTPUT parameters are in bold (the issue is they are coming without single quotes otherwise th equery is fine
L_QUERY IS :SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),'9999999.000') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),'$9,999,999.00') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),'9999999.000') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,'mm/dd/yyyy') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,'hh24:mi'), '00:00','24:00', TO_CHAR(s_datetime+.000011574,'hh24:mi')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = N3165 AND s_mtrch = '1'
AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,'DD-MON-YY') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = N3165 AND s_mtrch = '2'
AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,' DD-MON-YY') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)The correct way to handle this is to use bind variables.
And use DBMS_XMLGEN instead of DBMS_XMLQUERY :
create or replace procedure temp (
p_mtr_id in varchar2
, p_from_date in date
, p_through_date in date
is
l_xml CLOB;
l_query VARCHAR2(2000);
l_ctx dbms_xmlgen.ctxHandle;
begin
l_query:= 'SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
||'mi''), ''00:'
||'00'',''24:'
||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
||'mi'')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = :P_MTR_ID
AND s_mtrch = ''1''
AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
AND (TO_DATE(:P_THROUGH_DATE,''DD-MON-YY'') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = :P_MTR_ID
AND s_mtrch = ''2''
AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
AND (TO_DATE(:P_THROUGH_DATE,'' DD-MON-YY'') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)';
l_ctx := dbms_xmlgen.newContext(l_query);
dbms_xmlgen.setBindValue(l_ctx, 'P_MTR_ID', p_mtr_id);
dbms_xmlgen.setBindValue(l_ctx, 'P_FROM_DATE', to_char(p_from_date, 'DD-MON-YY'));
dbms_xmlgen.setBindValue(l_ctx, 'P_THROUGH_DATE', to_char(p_through_date, 'DD-MON-YY'));
l_xml := dbms_xmlgen.getXML(l_ctx);
dbms_xmlgen.closeContext(l_ctx);
insert into nk values (l_xml);
end;
Maybe you are looking for
-
How can I add additional email accounts
I am trying to move my email from windows live mail to Thunderbird. I have three email accounts which i wish to set up. There does not seem to be any 'account setup button'. Is this achievable in some way ? Thanks in advance for any advice
-
Incredible?? really?
I have been a Verizon customer for many years now and I am debating to jump ship. I like the coverage of Verizon but there is a lack of quality in every device I have seen them put out for the past 3 years. I currently have a BB 8330. I am on my 4
-
Easy Points for the Quickest Poster
Worlds dumbest question, I'm sure, but for the life of me I can't figure this out: Video_TS folder .... does DVDSP automatically create one for every project or do I have to export one? I can't find a button to create one and all I see on my hard dri
-
Dynamically Selecting Hierarchy Nodes for each year
Hi All, I have a strange query requirement. I am having a hierarchy which is divided based on region, quarter and marketing campaign. Like below: APAC 2010 Q1 Brand Marketing M09/2010-000074 (Node Technic
-
I got Creative Cloud because it said using it to purchase Adobe Flash CS6 was a better deal, but I don't see it on Creative Cloud. Is it not available there?