Getservbyname always fails
I noticed that getservbyname("http", "tcp") always returns null on one of my computers - the parameters are not relevant as other parameters will fail as well. (The origin of this problem is that "ntpd" doesn't work.)
I reduced this to running "dscacheutil -q service -a name http" which should produce the following:
name: http
aliases: www www-http
protocol: udp
port: 80
On the "bad" computer, this command returns nothing even though "dscacheutil -q service" does return a full set of services (including "http").
I ran this command in a script:
#!/bin/bash
LOG=/Library/Logs/DirectoryService/DirectoryService.debug.log
sudo rm -f $LOG
sudo killall -USR1 DirectoryService
dscacheutil -q service -a name http
sudo killall -USR1 DirectoryService
cat $LOG
and to my eyes, the output looks pretty normal (except that there is no output produced from the command itself) - the output is shown below. Also, the output to /var/log/system.log seems normal as well.
There are no other symptoms that I can detect (ssh, scp, firefox, etc all work fine).
On another Mac I have, all is normal, including the output of "dscacheutil".
Any ideas?
Thanks,
Bill Mershon
_ Output from script showing DirectoryService debug log _
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Debug Logging turned ON after receiving USR1 signal.
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: dscacheutil, PID: 32145, API: libinfo, Server Used : libinfomig DAC : Procedure Request = getservbyname
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: dscacheutil, PID: 32145, API: libinfo, Server Used : libinfomig DAR : Procedure = getservbyname (9) : Result code = 0
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: dscacheutil, PID: 32145, API: libinfo, Server Used : libinfomig DAC : Procedure = getservbyname (9)
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - CCachePlugin::getservbyname - Cache hit for http:
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: dscacheutil, PID: 32145, API: libinfo, Server Used : libinfomig DAR : Procedure = getservbyname (9) : Result code = 0
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAC : Procedure Request = getpwuid
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAR : Procedure = getpwuid (3) : Result code = 0
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAC : Procedure = getpwuid (3)
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - CCachePlugin::getpwuid - Cache hit for 501
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAR : Procedure = getpwuid (3) : Result code = 0
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAC : Procedure Request = getpwnam
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAR : Procedure = getpwnam (1) : Result code = 0
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAC : Procedure = getpwnam (1)
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - CCachePlugin::getpwnam - Cache hit for root
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAR : Procedure = getpwnam (1) : Result code = 0
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAC : Procedure = getpwnam (1)
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - CCachePlugin::getpwnam - Cache hit for root
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAR : Procedure = getpwnam (1) : Result code = 0
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: UserGroup_GetAllGroups, Server Used : mbr_mig DAC : uid = 0
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: UserGroup_GetAllGroups, Server Used : mbr_mig DAR : Total groups = 19
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAC : Procedure Request = getgrnam
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAR : Procedure = getgrnam (5) : Result code = 0
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAC : Procedure = getgrnam (5)
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - CCachePlugin::getgrnam - Cache hit for admin
2010-05-04 18:33:46 MDT - T[0x0000000100681000] - Client: sudo, PID: 32146, API: libinfo, Server Used : libinfomig DAR : Procedure = getgrnam (5) : Result code = 0
Because the direct approach wasn't working, I tried some general maintenance procedures. First, I used the disk utility to fix file permissions; it found some problems, but this didn't help. Next, I tried cleaning out the caches (/Library/Caches and ~/Library/Caches); this didn't help either. Finally, I tried a "Safe Boot" under the theory that there could be some minor file system corruption. To my surprise, this worked and all of my tests (dscachutil, ntpd, etc) now work properly. Still, it would have been nice to know the precise origin of the problem and a clear technique for finding it.
Similar Messages
-
!! ORACM always FAILS one node - Oracle 9i rac -Sles9 - 9.2.0.8 ORACM
Hi,
I really need help with this. I applied all the patches possible. I tried sharing the quorum.dbf as a nfs device, raw device, iscsi lun ... i patched the ORACM to 9.2.0.5, 9.2.0.6, and now 9.2.0.8. The setup has two hp dl360 with sles9 sp2, x86_64 and oracle 9.2 rac...
The problem is the cluster manager starts on one node. and when i run ./ocmstart.sh on the other node, it always fails. The CM.LOG file is pasted below. I get the same errors at all the patch levels. The quorum.dbf is setup as an iscsi lun on a netapp filer, which is then bounded to a raw device on the host. Whichever node i start the oracle cluster manager first, works and the other node always fails with the errors shown below.
It also keeps complaining about InitializeCM: query_module() failed about the hangcheck timer. The hangcheck timer is already loaded and i can see it in /sbin/lsmod
I would really appreciate help on this. This is my master's project at school and i cant graduate if this doesnt work. Please provide some guidance.
thanks
vishal
CM.LOG
tweedledum:/u01/app/oracle/product/920/oracm/log # cat cm.log
oracm, version[ 9.2.0.8.0.01 ] started {Tue Feb 13 00:56:16 2007 }
KernelModuleName is hangcheck-timer {Tue Feb 13 00:56:16 2007 }
OemNodeConfig(): Network Address of node0: 1.1.1.3 (port 9998)
{Tue Feb 13 00:56:16 2007 }
OemNodeConfig(): Network Address of node1: 1.1.1.4 (port 9998)
{Tue Feb 13 00:56:16 2007 }
WARNING: OemInit2: Opened file(/oradata/quorum.dbf 6), tid = main:182900764192 file = oem.c, line = 503 {Tue Feb 13 00:56:16 2007 }InitializeCM: ModuleName = hangcheck-timer {Tue Feb 13 00:56:16 2007 }
ClusterListener: Spawned with tid 0x4080e960 pid: 19662 {Tue Feb 13 00:56:16 2007 }
ERROR: InitializeCM: query_module() failed, tid = main:182900764192 file = cmstartup.c, line = 341 {Tue Feb 13 00:56:16 2007 }Debug Hang : ClusterListener (PID=19662) Registered with ORACM. {Tue Feb 13 00:56:16 2007 }
Debug Hang :StartNMMon (PID=19662) Registered with ORACM. {Tue Feb 13 00:56:16 2007 }
Debug Hang : CmConnectListener (PID=19662):Registered with ORACM. {Tue Feb 13 00:56:16 2007 }
CreateLocalEndpoint(): Network Address: 1.1.1.4
{Tue Feb 13 00:56:16 2007 }
PollingThread: Spawned with tid 0x40c10960. pid: 19662 {Tue Feb 13 00:56:16 2007 }
Debug Hang :PollingThread (PID=19662): Registered with ORACM. {Tue Feb 13 00:56:16 2007 }
SendingThread: Spawned with tid 0x41012960, 0x41012960. pid: 19662 {Tue Feb 13 00:56:16 2007 }
DiskPingThread: Spawned with tid 0x40e11960. pid: 19662 {Tue Feb 13 00:56:16 2007 }
Debug Hang : DiskPingThread (PID=19662): Registered with ORACM. {Tue Feb 13 00:56:16 2007 }
Debug Hang :SendingThread (PID=19662): Registered with ORACM. {Tue Feb 13 00:56:16 2007 }
UpdateNodeState(): node(1) added udpated {Tue Feb 13 00:56:19 2007 }
HandleUpdate(): SYNC(1) from node(0) completed {Tue Feb 13 00:56:19 2007 }
HandleUpdate(): NODE(0) IS ACTIVE MEMBER OF CLUSTER, INCARNATION(1) {Tue Feb 13 00:56:19 2007 }
HandleUpdate(): NODE(1) IS ACTIVE MEMBER OF CLUSTER, INCARNATION(2) {Tue Feb 13 00:56:19 2007 }
--- DUMP GROUP STATE DB ---
--- END OF GROUP STATE DUMP ---
--- Begin Dump ---
oracm, version[ 9.2.0.8.0.01 ] started {Tue Feb 13 00:56:16 2007 }
TRACE: LogListener: Spawned with tid 0x4060d960., tid = LogListener:1080088928 file = logging.c, line = 116 {Tue Feb 13 00:56:16 2007 }
TRACE: Can't read registry value for HeartBeat, tid = main:182900764192 file = unixinc.c, line = 1080 {Tue Feb 13 00:56:16 2007 }
TRACE: Can't read registry value for PollInterval, tid = main:182900764192 file = unixinc.c, line = 1080 {Tue Feb 13 00:56:16 2007 }
TRACE: Can't read registry value for WatchdogTimerMargin, tid = main:182900764192 file = unixinc.c, line = 1080 {Tue Feb 13 00:56:16 2007 }
TRACE: Can't read registry value for WatchdogSafetyMargin, tid = main:182900764192 file = unixinc.c, line = 1080 {Tue Feb 13 00:56:16 2007 }KernelModuleName is hangcheck-timer {Tue Feb 13 00:56:16 2007 }
TRACE: Can't read registry value for ClientTimeout, tid = main:182900764192 file = unixinc.c, line = 1080 {Tue Feb 13 00:56:16 2007 }
TRACE: InitNMInfo: setting clientTimeout to 140s based on MissCount 210 and PollInterval 1000ms, tid = main:182900764192 file = nmconfig.c, line = 138 {Tue Feb 13 00:56:16 2007 }
TRACE: InitClusterDb(): getservbyname on CMSrvr failed - 0 : assigning 9998, tid = main:182900764192 file = nmconfig.c, line = 208 {Tue Feb 13 00:56:16 2007 }OemNodeConfig(): Network Address of node0: 1.1.1.3 (port 9998)
{Tue Feb 13 00:56:16 2007 }
OemNodeConfig(): Network Address of node1: 1.1.1.4 (port 9998)
{Tue Feb 13 00:56:16 2007 }
TRACE: OemCreateListenPort: bound at 9998, tid = main:182900764192 file = oem.c, line = 907 {Tue Feb 13 00:56:16 2007 }
TRACE: InitClusterDb(): found my node info at 1 name tweedledum, priv int-dum, port 3623, tid = main:182900764192 file = nmconfig.c, line = 261 {Tue Feb 13 00:56:16 2007 }
TRACE: InitClusterDb(): Local Node(1) NodeName[int-dum], tid = main:182900764192 file = nmconfig.c, line = 279 {Tue Feb 13 00:56:16 2007 }
TRACE: InitClusterDb(): Cluster(Oracle) with (2) Defined Nodes, tid = main:182900764192 file = nmconfig.c, line = 282 {Tue Feb 13 00:56:16 2007 }
TRACE: OEMInits(): CM Disk File (/oradata/quorum.dbf), tid = main:182900764192 file = oem.c, line = 248 {Tue Feb 13 00:56:16 2007 }
WARNING: OemInit2: Opened file(/oradata/quorum.dbf 6), tid = main:182900764192 file = oem.c, line = 503 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(0) rcfg(1) wrtcnt(1171356979) lastcnt(0) alive(1171356979), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(1) rcfg(1) wrtcnt(180) lastcnt(0) alive(1), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(2) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(3) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(4) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(5) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(6) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(7) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(8) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(9) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(10) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(11) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(12) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(13) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(14) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(15) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(16) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(17) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(18) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(19) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(20) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(21) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(22) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(23) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(24) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(25) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(26) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(27) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(28) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(29) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(30) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(31) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(32) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(33) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(34) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(35) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(36) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(37) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(38) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(39) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(40) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(41) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(42) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(43) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(44) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(45) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(46) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(47) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(48) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(49) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(50) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(51) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(52) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(53) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(54) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(55) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(56) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(57) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(58) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(59) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(60) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(61) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(62) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }
TRACE: ReadOthersDskInfo(): node(63) rcfg(0) wrtcnt(0) lastcnt(0) alive(0), tid = main:182900764192 file = oem.c, line = 1491 {Tue Feb 13 00:56:16 2007 }InitializeCM: ModuleName = hangcheck-timer {Tue Feb 13 00:56:16 2007 }
ClusterListener: Spawned with tid 0x4080e960 pid: 19662 {Tue Feb 13 00:56:16 2007 }
ERROR: InitializeCM: query_module() failed, tid = main:182900764192 file = cmstartup.c, line = 341 {Tue Feb 13 00:56:16 2007 }Debug Hang : ClusterListener (PID=19662) Registered with ORACM. {Tue Feb 13 00:56:16 2007 }
TRACE: ClusterListener (pid=19662, tid=1082190176): Registered with watchdog daemon., tid = ClusterListener:1082190176 file = nmlistener.c, line = 76 {Tue Feb 13 00:56:16 2007 }
TRACE: CmConnectListener: Spawned with tid 0x40a0f960., tid = CMConnectListerner:1084291424 file = cmclient.c, line = 216 {Tue Feb 13 00:56:16 2007 }Debug Hang :StartNMMon (PID=19662) Registered with ORACM. {Tue Feb 13 00:56:16 2007 }
TRACE: StartNMMon (pid=19662, tid=-1782829536): Registered with watchdog daemon., tid = main:182900764192 file = cmnodemon.c, line = 254 {Tue Feb 13 00:56:16 2007 }Debug Hang : CmConnectListener (PID=19662):Registered with ORACM. {Tue Feb 13 00:56:16 2007 }
TRACE: CmConnectListener (pid=19662, tid=1084291424): Registered with watchdog daemon., tid = CMConnectListerner:1084291424 file = cmclient.c, line = 247 {Tue Feb 13 00:56:16 2007 }CreateLocalEndpoint(): Network Address: 1.1.1.4
{Tue Feb 13 00:56:16 2007 }
TRACE: StartClusterJoin(): clusterState(0) nodeState(0), tid = main:182900764192 file = nmmember.c, line = 282 {Tue Feb 13 00:56:16 2007 }PollingThread: Spawned with tid 0x40c10960. pid: 19662 {Tue Feb 13 00:56:16 2007 }
Debug Hang :PollingThread (PID=19662): Registered with ORACM. {Tue Feb 13 00:56:16 2007 }
TRACE: PollingThread (pid=19662, tid=1086392672): Registered with watchdog daemon., tid = PollingThread:1086392672 file = nmmember.c, line = 765 {Tue Feb 13 00:56:16 2007 }SendingThread: Spawned with tid 0x41012960, 0x41012960. pid: 19662 {Tue Feb 13 00:56:16 2007 }
DiskPingThread: Spawned with tid 0x40e11960. pid: 19662 {Tue Feb 13 00:56:16 2007 }
Debug Hang : DiskPingThread (PID=19662): Registered with ORACM. {Tue Feb 13 00:56:16 2007 }
TRACE: DiskPingThread (pid=19662, tid=1088493920): Registered with watchdog daemon., tid = DiskPingThread:1088493920 file = nmmember.c, line = 1083 {Tue Feb 13 00:56:16 2007 }Debug Hang :SendingThread (PID=19662): Registered with ORACM. {Tue Feb 13 00:56:16 2007 }
TRACE: SendingThread (pid=19662, tid=1090595168): Registered with watchdog daemon., tid = SendingThread:1090595168 file = nmmember.c, line = 581 {Tue Feb 13 00:56:16 2007 }
TRACE: HandleJoin(): src[1] dest[1] dom[0] seq[1] sync[0], tid = ClusterListener:1082190176 file = nmlisten.c, line = 346 {Tue Feb 13 00:56:16 2007 }
TRACE: HandleJoin(): JOIN from node(1)->(1), tid = ClusterListener:1082190176 file = nmlisten.c, line = 362 {Tue Feb 13 00:56:16 2007 }
TRACE: HandleStatus(): node(0) UNKNOWN, tid = ClusterListener:1082190176 file = nmlisten.c, line = 404 {Tue Feb 13 00:56:17 2007 }
TRACE: HandleStatus(): src[0] dest[1] dom[0] seq[6] sync[1], tid = ClusterListener:1082190176 file = nmlisten.c, line = 415 {Tue Feb 13 00:56:17 2007 }
TRACE: HandleSync(): src[0] dest[1] dom[0] seq[7] sync[1], tid = ClusterListener:1082190176 file = nmlisten.c, line = 506 {Tue Feb 13 00:56:17 2007 }
TRACE: SendAck(): node(0) domain(0) syncSeqNo(1) type(11), tid = ClusterListener:1082190176 file = nmmember.c, line = 1922 {Tue Feb 13 00:56:17 2007 }
TRACE: HandleVote(): src[0] dest[1] dom[0] seq[8] sync[1], tid = ClusterListener:1082190176 file = nmlisten.c, line = 643 {Tue Feb 13 00:56:18 2007 }
TRACE: SendVoteInfo(): node(0) domain(0) syncSeqNo(1), tid = ClusterListener:1082190176 file = nmmember.c, line = 1736 {Tue Feb 13 00:56:18 2007 }
TRACE: HandleUpdate(): src[0] dest[1] dom[0] seq[9] sync[1], tid = ClusterListener:1082190176 file = nmlisten.c, line = 849 {Tue Feb 13 00:56:19 2007 }
TRACE: UpdateNodeState(): nodeNum 0, newState 2, tid = ClusterListener:1082190176 file = nmlisten.c, line = 1153 {Tue Feb 13 00:56:19 2007 }
TRACE: UpdateNodeState(): nodeNum 1, newState 2, tid = ClusterListener:1082190176 file = nmlisten.c, line = 1153 {Tue Feb 13 00:56:19 2007 }UpdateNodeState(): node(1) added udpated {Tue Feb 13 00:56:19 2007 }
TRACE: SendAck(): node(0) domain(0) syncSeqNo(1) type(15), tid = ClusterListener:1082190176 file = nmmember.c, line = 1922 {Tue Feb 13 00:56:19 2007 }
TRACE: HandleUpdate(): about to QueueClientEvent 0, 1, tid = ClusterListener:1082190176 file = nmlisten.c, line = 960 {Tue Feb 13 00:56:19 2007 }
TRACE: QueueClientEvent(): Sending Event(1) , tid = ClusterListener:1082190176 file = nmlisten.c, line = 1386 {Tue Feb 13 00:56:19 2007 }
TRACE: QueueClientEvent: Node[0] state = 2, tid = ClusterListener:1082190176 file = nmlisten.c, line = 1390 {Tue Feb 13 00:56:19 2007 }
TRACE: QueueClientEvent: Node[1] state = 2, tid = ClusterListener:1082190176 file = nmlisten.c, line = 1390 {Tue Feb 13 00:56:19 2007 }HandleUpdate(): SYNC(1) from node(0) completed {Tue Feb 13 00:56:19 2007 }
TRACE: HandleUpdate: saving incarnation value as 2, tid = ClusterListener:1082190176 file = nmlisten.c, line = 983 {Tue Feb 13 00:56:19 2007 }
HandleUpdate(): NODE(0) IS ACTIVE MEMBER OF CLUSTER, INCARNATION(1) {Tue Feb 13 00:56:19 2007 }
HandleUpdate(): NODE(1) IS ACTIVE MEMBER OF CLUSTER, INCARNATION(2) {Tue Feb 13 00:56:19 2007 }
TRACE: HandleStatus(): src[1] dest[1] dom[0] seq[2] sync[2], tid = ClusterListener:1082190176 file = nmlisten.c, line = 415 {Tue Feb 13 00:56:19 2007 }
TRACE: StartNMMon(): attached as node 1, tid = main:182900764192 file = cmnodemon.c, line = 288 {Tue Feb 13 00:56:19 2007 }
TRACE: StartNMMon: starting reconfig(2), tid = main:182900764192 file = cmnodemon.c, line = 395 {Tue Feb 13 00:56:19 2007 }
TRACE: UpdateEventValue: *(bfffe1f0) = (1, 1), tid = main:182900764192 file = unixinc.c, line = 336 {Tue Feb 13 00:56:19 2007 }
TRACE: UpdateEventValue: *(401bbeb0) = (3, 1), tid = main:182900764192 file = unixinc.c, line = 336 {Tue Feb 13 00:56:19 2007 }
TRACE: ReconfigThread: started for reconfig (2), tid = Reconfig Thread:1092696416 file = cmnodemon.c, line = 180 {Tue Feb 13 00:56:19 2007 }NMEVENT_RECONFIG [00][00][00][00][00][00][00][03] {Tue Feb 13 00:56:19 2007 }
TRACE: CleanupNodeContexts(): cleaning up nodes, rcfg(2), tid = Reconfig Thread:1092696416 file = cmnodemon.c, line = 671 {Tue Feb 13 00:56:19 2007 }
TRACE: DisconnectNode(): about to disconnect 0, tid = Reconfig Thread:1092696416 file = cmipc.c, line = 851 {Tue Feb 13 00:56:19 2007 }
TRACE: DisconnectNode(): waiting for 0 listeners to terminate, tid = Reconfig Thread:1092696416 file = cmipc.c, line = 874 {Tue Feb 13 00:56:19 2007 }
TRACE: UpdateEventValue: *(401be778) = (0, 1), tid = Reconfig Thread:1092696416 file = unixinc.c, line = 336 {Tue Feb 13 00:56:19 2007 }
TRACE: CleanupNodeContexts(): successful cleanup of nodes rcfg(2), tid = Reconfig Thread:1092696416 file = cmnodemon.c, line = 690 {Tue Feb 13 00:56:19 2007 }
TRACE: EstablishMasterNode(): MASTER is node(0) reconfigs(2), tid = Reconfig Thread:1092696416 file = cmnodemon.c, line = 832 {Tue Feb 13 00:56:19 2007 }
TRACE: IncrementEventValue: *(401b97c0) = (1, 1), tid = Reconfig Thread:1092696416 file = unixinc.c, line = 365 {Tue Feb 13 00:56:19 2007 }
TRACE: PrepareForConnectsX: still waiting at (0), tid = PrepareForConnectsX:1094797664 file = cmipc.c, line = 279 {Tue Feb 13 00:56:19 2007 }
TRACE: IncrementEventValue: *(401b97c0) = (2, 2), tid = PrepareForConnectsX:1094797664 file = unixinc.c, line = 365 {Tue Feb 13 00:56:19 2007 }--- End Dump ---Set the LD_ASSUME_KERNEL before starting the cluster manager:
export LD_ASSUME_KERNEL=2.4.19
export ORACLE_HOME=/oracle/app/oracle/product/9.2.0
rm -f /oracle/app/oracle/product/9.2.0/oracm/log/cm.log
rm -f /oracle/app/oracle/product/9.2.0/oracm/log/ocmstart.ts
$ORACLE_HOME/oracm/bin/ocmstart.sh
tail -f /oracle/app/oracle/product/9.2.0/oracm/log/cm.log -
Find All Occurrences always fails within loop
Dear forumers,
There's this strange problem that requires a fix.
Finding all occurences of '#' works fine here:-
REPORT zz_test.
DATA: lv_text TYPE string,
ls_result TYPE match_result,
et_release type table of yytc_release,
lt_result TYPE match_result_tab.
lv_text = '"RFC-1234#Create ""Payroll"" under NL directory"'.
FIND ALL OCCURRENCES OF REGEX '#'
IN lv_text
RESULTS lt_result IGNORING CASE IN CHARACTER MODE.
IF sy-subrc = 0. " SY-SUBRC is always 0
READ TABLE lt_result INTO ls_result INDEX 1.
WRITE :'Offset: ' .
WRITE: ls_result-offset .
WRITE: lv_text+00(ls_result-offset).
ENDIF.
But it always fails here, within a loop at an internal table:-
SELECT * .... INTO TABLE it_jira ...
LOOP AT it_jira ASSIGNING <jira>.
<release>-summary = <jira>-summary.
IF <release>-type CS 'Subtask'.
" <release>-summary is of data type CHAR255
PERFORM get_subtask USING <release>-summary.
ENDIF.
ENDLOOP.
FORM get_subtask USING pv_summary TYPE yytc_release-summary.
DATA:
lv_string TYPE char255,
lv_final TYPE char255,
lv_summary TYPE string,
lv_strlen TYPE i,
lt_result TYPE match_result_tab.
lv_string = pv_summary. " LV_STRING = '"RFC-1234#Create ""Payroll"" under NL directory"''
CONDENSE lv_string.
lv_strlen = STRLEN( lv_string ).
lv_strlen = lv_strlen - 1.
IF lv_string+0(1) = '"' AND lv_string+lv_strlen(1) = '"'.
lv_strlen = lv_strlen - 1.
WRITE lv_string+1(lv_strlen) TO lv_final+1(254).
ENDIF.
lv_summary = lv_final.
" FIND ALL OCCURRENCES OF '#'
" IN lv_summary
" RESULTS lt_result IGNORING CASE. * SY-SUBRC is always 4 here too
FIND ALL OCCURRENCES OF REGEX '#'
IN lv_summary
RESULTS lt_result IGNORING CASE IN CHARACTER MODE.
IF sy-subrc = 0. " SY-SUBRC is always 4 here - why?! :(
ENDIF.
CLEAR: lv_string,
lt_result.
ENDFORM. " GET_SUBTASK
Only when the string LV_SUMMARY is edited from within the debugger (add space to the string prefix, etc), the SY-SUBRC will be 0 and there'll be data found in LT_RESULT.
How can I resolve this issue? Please do help. Thanks.I think the subtle difference is that in your first example the character is actually '#' whereas in the second example it is actually another (unprintable)value such-as line-feed and only APPEARS to be '#'.
You must find out what the value in question is(will it always be the same value?) and then replace that instead of '#'. -
im trying to install new version of itunes in my macbook but always failed.i can download it but failed to install and always says to contact with software manufacturer for assistance...please heblp me i couldn’t connect my iphone to iktunes..please coz in my mac their is old version of i tunes.....
Welcome to the Apple Support Communities
See if your computer is supported > http://support.apple.com/kb/sp575 Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup, insert the DVD and upgrade. Finally, go to > Software Update and update to the latest version.
If your computer is compatible, you can use Mountain Lion. Open App Store and purchase Mountain Lion. Check if your programs are supported > http://www.roaringapps.com -
System Image Utility always fails, why?
Hi everyone,
on my clean and fresh install of 10.7.4 Server the System Image Utility always fails to create an image. I want to create a NetInstall image and have put the OS X Lion Installer in /Applications. I can select it in SIU and choose to create a NetInstall image. It asks for the admin pw and always presents an error at the very end: Image creation failed. An unknown error has occured.
If I select to create a NetBoot image instead it fails directly after clicking on the Create button with this slightly different message: Image creation failed. An error has occured. At least it’s no unknown error…
Any ideas what might be causing this? I have succesfully created NetInstall images with 10.6 Server and 10.8 Server, but 10.7 Server somehow won’t play nice.
Thanks
BjörnHi Brian,
I first deleted the Installer and redownloaded it from the App Store, just to make sure there was no problem with it. Even though I now have the 10.7.4 Installer (had 10.7.0 before) nothing has changed. I then went on to set the log level as suggested. I now get different errors based on the chosen log level.
Log level set to debug:
Image creation failed.
*** -[__NSArrayM insertObject:atIndex:]: object cannot be nil
Log level set to verbose:
Image creation failed.
An unknown error has occurred.
I did not see anything helpful in the logs unfortunately. The only noticeable thing mentioned was: Failed to create image from installer media.
Any additional ideas? I will attach both logs here, just in case.
VERBOSE LOG:
Starting image creation.
Workflow Started (2012-09-08 14:08:00 +0200)
Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
Starting action: Define Image Source (1.3)
Finished running action: Define Image Source
Starting action: Create Image (1.6.2)
Starting image creation process...
Create NetInstall Image
Initiating NetInstall from Installer media.
Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Creating disk image (Size: 4062 MB)
Finalizing disk image.
created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
Attaching disk image
Copying /Volumes/Mac OS X Install ESD
Preparing the kernel and boot loader for the boot image
/Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386
/Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386/x86_64
Copying /Volumes/Mac OS X Install ESD/boot.efi
Copying /Volumes/Mac OS X Install ESD/System/Library/CoreServices/PlatformSupport.plist
Performing post install cleanup
Detaching disk image
"disk4" unmounted.
"disk4" ejected.
Correcting permissions. 501:20 /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Script is done.
Failed to create image from installer media.
An unknown error has occurred.
NetInstall creation failed.
Image creation process finished...
Stopping image creation.
Image creation failed.
DEBUG LOG:
Starting image creation.
Workflow Started (2012-09-08 13:59:22 +0200)
Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
Starting action: Define Image Source (1.3)
Finished running action: Define Image Source
Starting action: Create Image (1.6.2)
Starting image creation process...
Create NetInstall Image
Initiating NetInstall from Installer media.
progressPrefix="_progress"
++ progressPrefix=_progress
scriptsDebugKey="DEBUG"
++ scriptsDebugKey=DEBUG
imageIsUDIFKey="1"
++ imageIsUDIFKey=1
mountPoint=""
++ mountPoint=
ownershipInfoKey="501:20"
++ ownershipInfoKey=501:20
destVolFSType="HFS+"
++ destVolFSType=HFS+
installSource="/Volumes/Mac OS X Install ESD"
++ installSource='/Volumes/Mac OS X Install ESD'
dmgTarget="NetInstall"
++ dmgTarget=NetInstall
destPath="/Users/vm/Desktop/NetInstall of Install Mac OS X Lion"
++ destPath='/Users/vm/Desktop/NetInstall of Install Mac OS X Lion'
dmgVolName="NetInstall"
++ dmgVolName=NetInstall
. "${1}/createCommon.sh"
+ . /tmp/niutemp.Yv8Z6Mqx/createCommon.sh
# createCommon.sh
# Common functionality for the Image creation process.
# sourced in by the various SIU scripts
# Copyright © 2007-2011 Apple Inc. All rights reserved.
# Using dscl, create a user account
AddLocalUser()
# $1 volume whose local node database to modify
# $2 long name
# $3 short name
# $4 isAdminUser key
# $5 password data
# $6 password hint
# $7 user picture path
# $8 Language string
local databasePath="/Local/Default/Users/${3}"
local targetVol="${1}"
# Find a free UID between 501 and 599
for ((i=501; i<600; i++)); do
output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
# If there is already an account dscl returns it, so we're looking for an empty return value.
if [ "$output" == "" ]; then
break
fi
done
# Create the user record
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
if [ $? != 0 ]; then
echo "Failed to create '${databasePath}'."
return 1
fi
# Add long name
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
if [ $? != 0 ]; then
echo "Failed to set the RealName."
return 1
fi
# Add PrimaryGroupID
if [ "${4}" == 1 ]; then
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 80
else
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
fi
if [ $? != 0 ]; then
echo "Failed to set the PrimaryGroupID."
return 1
fi
# Add UniqueID
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
if [ $? != 0 ]; then
echo "Failed to set the UniqueID."
return 1
fi
# Add Home Directory entry
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
if [ $? != 0 ]; then
echo "Failed to set the NFSHomeDirectory."
fi
if [ "${6}" != "" ]; then
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
if [ $? != 0 ]; then
echo "Failed to set the AuthenticationHint."
return 1
fi
fi
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
if [ $? != 0 ]; then
echo "Failed to set the picture."
return 1
fi
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
if [ $? != 0 ]; then
echo "Failed to set the passwd."
return 1
fi
# Add shell
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
if [ $? != 0 ]; then
echo "Failed to set the UserShell."
return 1
fi
# Create Home directory
if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
/usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
else
/usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
fi
if [ $? != 0 ]; then
echo "Failed to copy the User Template."
return 1
fi
/usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
if [ $? != 0 ]; then
echo "Failed to set ownership on the User folder."
return 1
fi
# Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
CopyEntriesFromFileToPath()
local theFile="$1"
local theDest="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
local leafName=`basename "${FILE}"`
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Copying ${FILE}."
fi
/usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
fi
done < "${theFile}"
return 0
# Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
CopyPackagesWithDestinationsFromFile()
local theFile="$1"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
local leafName=`basename "${FILE}"`
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Copying ${FILE}."
fi
read SUB_PATH
/usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
fi
done < "${theFile}"
return 0
# Create an installer package in ${1} wrapping the supplied script ${2}
CreateInstallPackageForScript()
local tempDir="$1"
local scriptPath="$2"
local scriptName=`basename "${scriptPath}"`
local entryDir=`pwd`
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Create installer for script ${scriptName}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# shouldn't exist on entry...
if [ -e "${tempDir}/emptyDir" ]; then
/bin/rm -rf "${tempDir}/emptyDir"
fi
# make some directories to work in
/bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
/bin/mkdir $opt "${tempDir}/emptyDir" || return 1
# Create Archive.pax.gz
cd "${tempDir}/emptyDir"
/bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
/usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
cd "${entryDir}"
# Create the Archive.bom file
/usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
# Create the Info.plist
/bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.server.SystemImageUtility.${scriptName}</string>
<key>CFBundleShortVersionString</key>
<string>1</string>
<key>IFMajorVersion</key>
<integer>1</integer>
<key>IFMinorVersion</key>
<integer>0</integer>
<key>IFPkgFlagDefaultLocation</key>
<string>/tmp</string>
<key>IFPkgFlagInstallFat</key>
<false/>
<key>IFPkgFlagIsRequired</key>
<false/>
<key>IFPkgFormatVersion</key>
<real>0.10000000149011612</real>
</dict>
</plist>
END
echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
# Copy the script
/bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
# clean up
/bin/rm -r "${tempDir}/emptyDir"
return 0
# Validate or create the requested directory
CreateOrValidatePath()
local targetDir="$1"
if [ ! -d "${targetDir}" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Creating working path at ${targetDir}"
fi
/bin/mkdir -p "${targetDir}" || return 1
fi
# If any exist, apply any user accounts
CreateUserAccounts()
# $1 volume whose local node database to modify
local count="${#userFullName[*]}"
local targetVol="${1}"
if [ $count -gt 0 ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Adding $count user account(s) to the image"
fi
for ((index=0; index<$count; index++)); do
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Adding user ${userFullName[$index]}"
fi
#lay down user here
AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
if [ $? != 0 ]; then
echo "Failed to create the User '${userUnixName[$index]}'."
return 1
fi
done
# "touch"
/usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
/usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
fi
# retry the hdiutil detach until we either time out or it succeeds
retry_hdiutil_detach()
local mount_point="${1}"
local tries=0
local forceAt=0
local limit=24
local opt=""
forceAt=$(($limit - 1))
while [ $tries -lt $limit ]; do
tries=$(( tries + 1 ))
/bin/sleep 5
echo "Attempting to detach the disk image again..."
/usr/bin/hdiutil detach "${mount_point}" $opt
if [ $? -ne 0 ]; then
# Dump a list of any still open files on the mountPoint
if [ "${scriptsDebugKey}" == "DEBUG" ]; then
/usr/sbin/lsof +fg "${mount_point}"
fi
if [ $tries -eq $forceAt ]; then
echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
opt="-force"
fi
if [ $tries -eq $limit ]; then
echo "Failed to detach disk image at '${mount_point}'."
exit 1
fi
else
tries=$limit
fi
done
# Create the dyld shared cache files
DetachAndRemoveMount()
local theMount="${1}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Detaching disk image"
# Dump a list of any still open files on the mountPoint
if [ "${scriptsDebugKey}" == "DEBUG" ]; then
/usr/sbin/lsof +fg "${theMount}"
fi
fi
# Finally detach the image and dispose the mountPoint directory
/usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
/bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
HostKey /private/var/tmp/ssh_host_key
HostKey /private/var/tmp/ssh_host_rsa_key
HostKey /private/var/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
fi
return 0
# If any exist, install configuration profiles to the install image
InstallConfigurationProfiles()
local tempDir="${1}"
local targetVol="${2}"
local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/configProfiles.txt" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Configuration Profiles"
fi
/bin/mkdir -p "${profilesDir}/Setup" || return 1
# Make sure the perms are correct
/usr/sbin/chown root:wheel "${profilesDir}"
/bin/chmod 755 "${profilesDir}"
/usr/sbin/chown root:wheel "${profilesDir}/Setup"
/bin/chmod 755 "${profilesDir}/Setup"
/usr/bin/touch "${profilesDir}/.profilesAreInstalled"
CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
# Enable MCX debugging
if [ 1 == 1 ]; then
if [ -e "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
/usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
/usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
fi
/usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
/usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
fi
fi
# Converts a list of scripts (full paths contained in the file at $1) into packages in $3
InstallScriptsFromFile()
local tempDir="${1}"
local theFile="${2}"
local targetDir="${3}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Converting scripts into install packages"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
# make an installer package out of the script
CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
# copy the resulting package to the Packages directory
local leafName=`basename "${FILE}"`
/usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
# clean up
/bin/rm -r "${tempDir}/${leafName}.pkg"
fi
done < "${theFile}"
return 0
# Prepare the source by deleting stuff we don't want to copy if sourcing a volume
PostFlightDestination()
local tempDir="${1}"
local destDir="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Performing post install cleanup"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
opt="-v"
fi
fi
# delete the DS indices to force reindexing...
if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
/bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
fi
# detach the disk and remove the mount folder
DetachAndRemoveMount "${mountPoint}"
if [ $? != 0 ]; then
echo "Failed to detach and clean up the mount at '${mountPoint}'."
return 1
fi
echo "Correcting permissions. ${ownershipInfoKey} $destDir"
/usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
# Prepare the source by deleting stuff we don't want to copy if sourcing a volume
PreCleanSource()
local srcVol="$1"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
opt="-v"
fi
fi
if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Removing swapfiles on $1"
fi
/bin/rm $opt "$srcVol/private/var/vm/swapfile*"
fi
if [ -d "$srcVol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and kext cache for t /bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
HostKey /private/var/tmp/ssh_host_key
HostKey /private/var/tmp/ssh_host_rsa_key
HostKey /private/var/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libexmountPoint=`mktemp -d "/tmp/mnt.XXXXXXXX"`
errExit()
echo "Execution of '`basename ${0}`' failed. Cleaning up."
# detach the disk and remove the mount folder
DetachAndRemoveMount "${mountPoint}"
/bin/rm -r "${destPath}"
exit 1
# Set up for script debugging
debug_opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
debug_opt="-v"
fi
# Prepare the destination
CreateOrValidatePath "$destPath" || errExit
# update progress information
echo "${progressPrefix}_creatingImage_"
if [ -e "${installSource}/BaseSystem.dmg" ]; then
size=$2
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Creating disk image (Size: $size MB)"
fi
/usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
echo "${progressPrefix}_copyingSource_"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Attaching disk image"
fi
/usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
# Copy source Volume base system to
/usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
else
echo "This does not appear to be a Mac OS X Install DVD."
errExit
fi
# If adding any additional packages or scripts
if [ -e "${1}/OSInstall.collection" ]; then
/usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
/usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
# If adding any additional packages
if [ -e "${1}/additionalPackages.txt" ]; then
CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
fi
# If adding any scripts
if [ -e "${1}/additionalScripts.txt" ]; then
InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
fi
fi
# If it exists, install the partition data onto the install image
ProcessAutoPartition "${1}" || errExit
# If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
ProcessMinInstall "${1}" || errExit
# update progress information
echo "${progressPrefix}_buildingBooter_"
# Copy kernel and boot loader
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and boot loader for the boot image"
fi
# make sure this doesn't exist
if [ -e "${destPath}/i386" ]; then
/bin/rm -rf "${destPath}/i386"
fi
/bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
# copy these directly off the install media
/usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
/usr/bin/chflags nohidden "${destPath}/i386/booter"
# Grab the relevant portion of the com.apple.Boot.plist
kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
/usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
/usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
# extract the kernel & kernelcache for the boot shell
/usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
/usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
errExit
Vol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and kext cache for tPERCENT:0.000000
PERCENT:4.332841
PERCENT:8.985722
PERCENT:12.358444
PERCENT:14.524864
PERCENT:16.617430
PERCENT:19.522402
PERCENT:21.614967
PERCENT:23.535204
PERCENT:26.070902
PERCENT:29.271296
PERCENT:33.111767
PERCENT:38.847858
PERCENT:42.343674
PERCENT:44.707043
PERCENT:46.578041
PERCENT:49.138355
PERCENT:51.772526
PERCENT:55.563763
PERCENT:58.567207
PERCENT:62.210735
PERCENT:64.795670
PERCENT:69.719353
PERCENT:74.741508
PERCENT:77.055641
PERCENT:79.591331
PERCENT:83.013290
PERCENT:85.548988
PERCENT:88.010834
PERCENT:91.728210
PERCENT:97.710487
PERCENT:100.000000
PERCENT:-1.000000
Finalizing disk image.
created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
/bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Creating disk image (Size: 4062 MB)
/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libex
# update progress information
echo "${progressPrefix}_creatingImage_"
if [ -e "${installSource}/BaseSystem.dmg" ]; then
size=$2
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Creating disk image (Size: $size MB)"
fi
/usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
echo "${progressPrefix}_copyingSource_"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Attaching disk image"
fi
/usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
# Copy source Volume base system to
/usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
else
echo "This does not appear to be a Mac OS X Install DVD."
errExit
fi
# If adding any additional packages or scripts
if [ -e "${1}/OSInstall.collection" ]; then
/usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
/usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
# If adding any additional packages
if [ -e "${1}/additionalPackages.txt" ]; then
CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
fi
# If adding any scripts
if [ -e "${1}/additionalScripts.txt" ]; then
InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
fi
fi
# If it exists, install the partition data onto the install image
ProcessAutoPartition "${1}" || errExit
# If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
ProcessMinInstall "${1}" || errExit
# update progress information
echo "${progressPrefix}_buildingBooter_"
# Copy kernel and boot loader
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and boot loader for the boot image"
fi
# make sure this doesn't exist
if [ -e "${destPath}/i386" ]; then
/bin/rm -rf "${destPath}/i386"
fi
/bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
# copy these directly off the install media
/usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
/usr/bin/chflags nohidden "${destPath}/i386/booter"
# Grab the relevant portion of the com.apple.Boot.plist
kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
/usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
/usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
# extract the kernel & kernelcache for the boot shell
/usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
/usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
rrExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
tDestination "${1}" "$destPath" || errExit
errExit
Vol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
Stopping image creation.
Terminating script!
Image creation failed. -
Always fail to deploy to server when (Create a Simple EJB Session Bean )
Hi,
I'm trying the "Oracle JDeveloper 11g Tutorials" - "Create a Simple EJB Session Bean", I just follow the instructions in that page. But when I tried to run it, it always failed. Can anyone help me to have a look. I paste the log below. thank you.
There's an error in the log "java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener". but I don't know what's that meaning.
E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;e:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;e:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;e:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;e:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;e:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;e:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;e:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;E:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=e:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;e:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;e:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;e:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;e:\Oracle\MIDDLE~1\JDK160~1\jre\bin;e:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oracle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;G:\D\JACKYH\Installed\apache-ant-1.7.1\bin;C:\Program Files\TortoiseSVN\bin;C:\Program Files\CollabNet Subversion;U:.;V:.;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
e:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -DproxySet=false -Djbo.34010=false -Xverify:none -da -Dplatform.home=E:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=e:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;e:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;e:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<12/11/2008 10:54:31 AM EST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
E:\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<12/11/2008 10:54:32 AM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<12/11/2008 10:54:32 AM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008
WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008
WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<12/11/2008 10:54:33 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<12/11/2008 10:54:33 AM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<12/11/2008 10:54:34 AM EST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<12/11/2008 10:54:36 AM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<12/11/2008 10:54:38 AM EST> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<12/11/2008 10:54:38 AM EST> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<12/11/2008 10:54:39 AM EST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<12/11/2008 10:54:39 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<12/11/2008 10:54:39 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.12.54:7101 for protocols iiop, t3, ldap, snmp, http.>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<12/11/2008 10:54:39 AM EST> <Warning> <Server> <BEA-002611> <Hostname "jackyh.dst.com.au", maps to multiple IP addresses: 192.168.12.54, 127.0.0.1>
<12/11/2008 10:54:39 AM EST> <Warning> <Server> <BEA-002611> <Hostname "localhost", maps to multiple IP addresses: 192.168.12.54, 127.0.0.1>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 13829 ms.
DefaultServer started.
[Running application SessionEJB on Server Instance DefaultServer...]
---- Deployment started. ---- 12/11/2008 10:54:43
Target platform is (Weblogic 10.3).
Running dependency analysis...
2008-11-12 10:54:43.882: Writing EJB JAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB\SessionEJB-Project1-ejb
2008-11-12 10:54:43.914: Wrote EJB JAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB\SessionEJB-Project1-ejb
2008-11-12 10:54:44.148: Writing EAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB
2008-11-12 10:54:44.164: Wrote EAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB
Deploying Application...
<12/11/2008 10:54:46 AM EST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1226447686226' for task '0'. Error is: 'weblogic.management.DeploymentException: '
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
Truncated. see log file for complete stacktrace
>
<12/11/2008 10:54:46 AM EST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'SessionEJB'.>
<12/11/2008 10:54:46 AM EST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application SessionEJB on DefaultServer.: .
weblogic.management.DeploymentException:
#### Deployment incomplete. #### 12/11/2008 10:54:46
oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$4$1.run(AdrsStarter.java:1316)
Caused by: oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
... 12 more
#### Cannot run application SessionEJB due to error deploying to DefaultServer.
[Application SessionEJB stopped and undeployed from Server Instance DefaultServer]Steve,
I'm facing the same issue as user#####.
Your workaround does not work ; when I deploy manuelly the ear file, with a new weblogic-application.xml, I get the same error.
Does that happen a lot ? :p
Edit :
my web.xml :
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<description>Empty web.xml file for Web Application</description>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<context-param>
<description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
<param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<description>Whether the 'Generated by...' comment at the bottom of ADF Faces HTML pages should contain version number information.</description>
<param-name>oracle.adf.view.rich.versionString.HIDDEN</param-name>
<param-value>false</param-value>
</context-param>
<filter>
<filter-name>JpsFilter</filter-name>
<filter-class>oracle.security.jps.ee.http.JpsFilter</filter-class>
</filter>
<filter>
<filter-name>trinidad</filter-name>
<filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
</filter>
<filter>
<filter-name>adfBindings</filter-name>
<filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>JpsFilter</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
<dispatcher>INCLUDE</dispatcher>
</filter-mapping>
<filter-mapping>
<filter-name>trinidad</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
</filter-mapping>
<filter-mapping>
<filter-name>adfBindings</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
</filter-mapping>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/afr/*</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>35</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
</web-app>Luc-
Edited by: Lucas Ismag on 4 déc. 2008 05:33 -
Hi,
I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
Anyone else had problems or success with this?
Thanks in advance.9thdoc wrote:
I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
You need the Snow Leopard installation disk or a replacement for it. -
First flexunit test is always failing with Error Error #1009: Cannot access a property or method of
Hi,
I have flexunit project which I am trying to run on linux server.
1. I have Tests project.
2. I am trying to compile it on linux server and creating Tests.swf file and then executing Tests.swf using ant on 64 bit linux server using standalone flash debug player.
3. Tests project contains 4 tests and first tests always fail with following error,
test:
[flexunit] Validating task attributes ...
[flexunit] Generating default values ...
[flexunit] Using default working dir [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests]
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [/var/lib/flex4.1sdk]
[flexunit] haltonfailure: [true]
[flexunit] headless: [false]
[flexunit] display: [99]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] port: [1024]
[flexunit] swf: [/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/report]
[flexunit] Setting up server process ...
[flexunit] Entry [/mnt/build/VinitFlexUnitBranch/workspace/bin] already available in local trust file at [/home/deploy/.macromedia/Flash_Player/#Security/FlashPlayerTrust/flexUnit.cfg].
[flexunit] Executing 'gflashplayer' with arguments:
[flexunit] '/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Starting server ...
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit] Client connected.
[flexunit] Setting inbound buffer size to [262144] bytes.
[flexunit] Receiving data ...
[flexunit] Sending acknowledgement to player to start sending test data ...
[flexunit]
[flexunit] FlexUnit test pause in suite Tests.Classes.DummyASyncTest had errors.
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
[flexunit] <testcase classname="Tests.Classes::DummyASyncTest" name="pause" time="8" status="error"><error message="Error #1009: Cannot access a property or method of a null object reference." type="Tests.Classes::DummyASyncTest.pause" ><![CDATA[TypeError: Error #1009: Cannot access a property or method of a null object reference.
[flexunit] at org.fluint.uiImpersonation.flex::FlexEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.fluint.uiImpersonation::VisualTestEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher/getStage()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher()
[flexunit] at org.flexunit.internals.runners.statements::StackAndFrameManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withStackManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withDecoration()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/methodBlock()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runner::FlexUnitCore/beginRunnerExecution()
[flexunit] at org.flexunit.runner::FlexUnitCore/verifyRunnerCanBegin()
[flexunit] at org.flexunit.token::AsyncCoreStartupToken/sendReady()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/sendReadyNotification()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/handleListenerReady()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at org.flexunit.listeners::CIListener/setStatusReady()
[flexunit] at org.flexunit.listeners::CIListener/dataHandler()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at flash.net::XMLSocket/scanAndSendEvent()]]></error></testcase>
[flexunit] <endOfTestRun/>
[flexunit] Analyzing reports ...
[flexunit]
[flexunit] Suite: Tests.Classes.DummyASyncTest
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
[flexunit] Results :
[flexunit]
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
BUILD FAILED
/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/build.xml:26: FlexUnit tests failed during the test run.
at org.flexunit.ant.tasks.TestRun.analyzeReports(Unknown Source)
at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:390)
at org.apache.tools.ant.Target.performTasks(Target.java:411)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.apache.tools.ant.Main.runBuild(Main.java:809)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
Total time: 1 second
Exited with status 1
[deploy]$
4. Everytime I run this, any test which is run first will fail and all other tests will pass.
My Tests.as file is as below:
* Tests.as
package
import Tests.XTestSuite;
import flash.display.Sprite;
import mx.core.FlexSprite;
import org.flexunit.listeners.CIListener;
import org.flexunit.listeners.UIListener;
import org.flexunit.runner.FlexUnitCore;
public class Tests extends Sprite
public var flexSprite:FlexSprite;
public function Tests()
onCreationComplete();
public function onCreationComplete() : void {
var core : FlexUnitCore = new FlexUnitCore();
core.addListener(new CIListener());
core.runClasses(Tests.XTestSuite);
public function currentRunTestSuite():Array
var testsToRun:Array = new Array();
testsToRun.push(Tests.XTestSuite);
return testsToRun;
XTestSuite try to run 4 flexunit test classes.
one of that flexunit test script class is as below:
package Tests.Classes
import flexunit.framework.Assert;
import org.flexunit.Assert;
import org.flexunit.asserts.assertEquals;
public class DummyASyncTest
[Test]
public function pause() : void
assertEquals(true, true);
trace("I M in dummy");
All other tests are dummy tests which just asserts(true, true).
I am not sure if I doing something wrong or forgot to take care of something.Hi,
I have flexunit project which I am trying to run on linux server.
1. I have Tests project.
2. I am trying to compile it on linux server and creating Tests.swf file and then executing Tests.swf using ant on 64 bit linux server using standalone flash debug player.
3. Tests project contains 4 tests and first tests always fail with following error,
test:
[flexunit] Validating task attributes ...
[flexunit] Generating default values ...
[flexunit] Using default working dir [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests]
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [/var/lib/flex4.1sdk]
[flexunit] haltonfailure: [true]
[flexunit] headless: [false]
[flexunit] display: [99]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] port: [1024]
[flexunit] swf: [/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/report]
[flexunit] Setting up server process ...
[flexunit] Entry [/mnt/build/VinitFlexUnitBranch/workspace/bin] already available in local trust file at [/home/deploy/.macromedia/Flash_Player/#Security/FlashPlayerTrust/flexUnit.cfg].
[flexunit] Executing 'gflashplayer' with arguments:
[flexunit] '/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Starting server ...
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit] Client connected.
[flexunit] Setting inbound buffer size to [262144] bytes.
[flexunit] Receiving data ...
[flexunit] Sending acknowledgement to player to start sending test data ...
[flexunit]
[flexunit] FlexUnit test pause in suite Tests.Classes.DummyASyncTest had errors.
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
[flexunit] <testcase classname="Tests.Classes::DummyASyncTest" name="pause" time="8" status="error"><error message="Error #1009: Cannot access a property or method of a null object reference." type="Tests.Classes::DummyASyncTest.pause" ><![CDATA[TypeError: Error #1009: Cannot access a property or method of a null object reference.
[flexunit] at org.fluint.uiImpersonation.flex::FlexEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.fluint.uiImpersonation::VisualTestEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher/getStage()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher()
[flexunit] at org.flexunit.internals.runners.statements::StackAndFrameManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withStackManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withDecoration()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/methodBlock()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runner::FlexUnitCore/beginRunnerExecution()
[flexunit] at org.flexunit.runner::FlexUnitCore/verifyRunnerCanBegin()
[flexunit] at org.flexunit.token::AsyncCoreStartupToken/sendReady()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/sendReadyNotification()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/handleListenerReady()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at org.flexunit.listeners::CIListener/setStatusReady()
[flexunit] at org.flexunit.listeners::CIListener/dataHandler()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at flash.net::XMLSocket/scanAndSendEvent()]]></error></testcase>
[flexunit] <endOfTestRun/>
[flexunit] Analyzing reports ...
[flexunit]
[flexunit] Suite: Tests.Classes.DummyASyncTest
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
[flexunit] Results :
[flexunit]
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
BUILD FAILED
/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/build.xml:26: FlexUnit tests failed during the test run.
at org.flexunit.ant.tasks.TestRun.analyzeReports(Unknown Source)
at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:390)
at org.apache.tools.ant.Target.performTasks(Target.java:411)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.apache.tools.ant.Main.runBuild(Main.java:809)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
Total time: 1 second
Exited with status 1
[deploy]$
4. Everytime I run this, any test which is run first will fail and all other tests will pass.
My Tests.as file is as below:
* Tests.as
package
import Tests.XTestSuite;
import flash.display.Sprite;
import mx.core.FlexSprite;
import org.flexunit.listeners.CIListener;
import org.flexunit.listeners.UIListener;
import org.flexunit.runner.FlexUnitCore;
public class Tests extends Sprite
public var flexSprite:FlexSprite;
public function Tests()
onCreationComplete();
public function onCreationComplete() : void {
var core : FlexUnitCore = new FlexUnitCore();
core.addListener(new CIListener());
core.runClasses(Tests.XTestSuite);
public function currentRunTestSuite():Array
var testsToRun:Array = new Array();
testsToRun.push(Tests.XTestSuite);
return testsToRun;
XTestSuite try to run 4 flexunit test classes.
one of that flexunit test script class is as below:
package Tests.Classes
import flexunit.framework.Assert;
import org.flexunit.Assert;
import org.flexunit.asserts.assertEquals;
public class DummyASyncTest
[Test]
public function pause() : void
assertEquals(true, true);
trace("I M in dummy");
All other tests are dummy tests which just asserts(true, true).
I am not sure if I doing something wrong or forgot to take care of something. -
Trying to install Camera Raw 6.7 for a Cannon EosX, always fails.
Hello,
I am trying to install the Camera Raw 6.7 update for a Cannon EosX on a Mac, it always fails during the install saying that the administrator is suppressing the update. I am logged into the administrative account on this computer, and can not figure out what is preventing the install from going through.
The laptop is an OS 10.8.5 Mac, using Potoshop CS5.
Has anyone run into this? Any solutions out there?try a manual update, http://www.adobe.com/downloads/updates/
-
I'm trying to render a project of about 1 hour long, and it always fails.
If render from Premiere Pro, I get a dialog box that just says:
"Error rendering project
unknown error"
If I try to render from Adobe Media encoder, I get tthe following logs.
- Encoding Time: 00:03:54
06/18/2013 05:32:42 PM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Encoding Time: 00:03:59
06/18/2013 05:52:11 PM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Encoding Time: 00:08:08
06/18/2013 07:54:40 PM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.Ok, Greg.
I'm so nice that I've actually prepared a complete project, with video, sequence and all that fancy stuff
I use the following settings to render it:
Format: H.264
Preset: [email protected]
If you render it from within Premiere, it gives you the error message at about 35 to 40%; the actual position is random.
Also, after the error message is shown, if you click "export" again, it immediately gives you the "unknown error" message, and it won't render anything until you quit Premiere.
When you quit Premiere, sometimes it crashes, sometimes it doesnt.
So, to me, the evidence points to a lost pointer in the Lumetri effect. If you tell those symptoms to a programmer, I'm sure will agree with it.
Please download the project from here:
https://docs.google.com/file/d/0ByqySS0VNaNUb0NRbjBCZFBhUjA/edit?usp=sharing
Also, please let me know when I can delete the file, since it takes too much space of google drive.
Hope this helps to solve the problem ASAP, since the Lumetri effect is my TOP favorite new feature of Premiere CC . -
ITunes update always fails on Windows 7 x64
I have had this problem for over a year on my Windows 7 64-bit system. Whenever there is a new version of iTunes, I try and update using the iTunes Software Update notification that pops up. This always fails to install. I am then forced to uninstall it fully and re-install using the directions located here:
http://support.apple.com/kb/ht1923
The above works but is a major hassle. I don't understand why this keeps happening and have looked for solutions here and elsewhere. Any help would be appreciated.
Thanks!I have had this problem on my x64 Win7 machine for as long as I can remember. I may however have found a solution. I recently added another User Account (non-admin) to my machine so my wife could use it too. Whilst logged in her account today iTunes popped up with an update. I had tried this update (10.6.3.25) on my windows account a couple of times with it failing each time. I had decided I could no longer be bothered going through the full uninstall/reinstall process again and wasn't going to bother.
For some reason though I thought I'd give it a go on my wife's windows login. It worked just fine.......
So my suggestion is to create another Windows User Account and see if you can update iTunes from that account instead. It's the first time in at least 18 months that iTunes update has worked properly. -
Whenever I try to sync my iPhone 3Gs it always fails, saying the device timed out. Any suggestions with what to do??
Did you recently restore or update your iPhone?
-
How do I get a refund? I have tried to use this converter to change a PDF to a word document or excel document three of four times and it always fails.. I want my money back but don't see any way to communicate with Adobe. i really just want my money back. Very disappointed. Also disappointed that it is so hard to find a way to communicate with Adobe that I have to resort to asking this question in this forum.
You need to use the CHAT link in support to reach Adobe staff. Be sure you know the product name you are trying to cancel, Adobe have lots of products, several converters etc. I think it is ExportPDF you have, most likely.
-
i have a problem in buying zynga poker chips, every time i try to buy chips they tell me contacts itunes support and the the purchase always failed, i contacted zynga but they told me that i have to contact itunes because they don't know the problem ?
P.S i always use my credit money from gift cards to buy anything from itunes or in apps - purchasing.
so what do u think should i do ?Have you tried contacting iTunes support : http://www.apple.com/support/itunes/contact/ ?
-
11g EM for windows host credentials always fail verify
Hi,
I tried to enter the OS host credential in the 11g EM database control, but it always failed to verify or show invalid username or password. Anyone know how and what user name should I enter?
Thanks
VincentThis section way at the bottom of the Post Installation tasks should help you:
http://download.oracle.com/docs/cd/B28359_01/install.111/b32006/postcfg.htm#BABFAEIG
Make sure that the OS user that you are setting up for Preferred Credentials has the Log on as a batch job privilege enabled.
Maybe you are looking for
-
Hi I would like to know if I can add a field in a cube without deleting the data as I dont want previous data for this added field. I am just interested in the new data coming through Delta in the cube. Many Thanks. Kind Regards, Kate
-
Protect functionality in Smartform
Hi, Do we have any command like Protect in smartform to keep the contents of a page together. Also i have decalred an internal tabe in which some fields are coming from VBAK and other from VBAP, now when i am trying to declare it in Smartform interfa
-
Different versions of Camera Raw launch from Bridge
I'm running Mac OS X 10.6.8, Bridge CS 4 (3.0.0.464), Camera Raw 5.0, PSE8, and using a Nikon D5000. I have .jpg files and .nef files. From Bridge I double click on a .nef file and Camera Raw launches - but with limited options (only three tabs for e
-
Why the round button in iphone4 does not operate sometimeS?
-
Hi , TILL NOW ANY BODY HAS RUN APPLICATION ( calling flex application in url) WHICH INVOKES A SERVLET PERFORMS REQUEST/RESPONCE . IF YES PLEASE SOLVE MY CODE. ELSE PLEASE HELP ME WITH A SAMPLE CODE/Example. currently i have a login.jsp in which i am