Getting calendar events from exchange 2003

Hi All,
We have a requirement of getting the calendar items from exchange server 2003 using web dav , jakarta slide
initially we made a connection and retrieve the mail items from server
we use search method of org.webdav.lib.httpclient.method.search method to search and retrieve the responses
can any one say how to build an XML request for retrieving calendar events from exchange and how to parse the search method response from and retrieving it.
it would be more helpful if any one throw some light on this
thanks in advance,
Sasikumar

myscreen-sasi wrote:
We have a requirement of getting the calendar items from exchange server 2003 using web dav , jakarta slide This forum is for Sun Calendar Server and has nothing to do with Microsoft Exchange or web-dav programming. I suggest asking on a different forum e.g. java programming:
http://forums.sun.com/forum.jspa?forumID=31
Regards,
Shane.

Similar Messages

Calendar Free/Busy permissions being ignored for users migrated from Exchange 2003, fine for new users created on Exchange 2010

I have uncovered a situation where it seems the free/busy permissions are being ignored for users that were migrated from Exchange 2003 to Exchange 2010.
I have the default permissions set to only show Free/Busy Time, not Details. However if I look at the calendar for a users who was migrated from the old Exchange 2003 server, I can see details. If I look
at a newer user who was added directly to the Exchange 2010 server, I (correctly) only see the times and "Free" or "Busy", not the specific details.
I verified the permissions on the migrated mailboxes many different ways (Exfolders, cmdlets, etc) and all signs point to only allow showing Free/Busy Times, but alas, I can still see the Details as well.
My users are using Outlook 2010.

Hi,
Does this issue occur on Outlook only or both Outlook and OWA?
Since you have double checked the permissions via multiple methods, it seems there is nothing problem on permission. Please make sure the migration from Exchange 2003 server completed successfully.
If in OWA everything goes well (cannot see details), it should be an issue on the Outlook client side.
I suggest run Outlook under safe mode to avoid some AVs and add-ins.
I suggest re-create profile to refresh the caches.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Moving public folders from exchange 2003 to exchange 2010 error while moving replicas

Dear All,
i am in the process of migrating from Microsoft Exchange 2003 to Exchange 2010,
i am done with moving all the mailboxes 300 mailbox almost with a 1.5 TB DB with no issues
when i tried all the processes, procedures, instructions and forums to move the public folder or
to use move all replicas from Exchange 2003 to Exchange 2010 i always get errors , now when i try
to open PF Management console from the exchange 2010 server i get it but it is disconnected
then i can choose to coneect to the new server name EXCHANGE2010 with no issues
when i try to expand the default folder and system folder i get the following error.
OAB is set on the new server as default.
when i try to add replica using power shell i get this error:
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an inst
of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Get-PublicFolder], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Management.MapiTasks.GetPublicFolder
following error when trying to expand PF on EXCHANGE 2010
Microsoft Corporation
Microsoft® Windows® Operating System
6.0.6000.16386
Unexpected error [0x7653450B] while executing command 'get-publicfolder -getchildren -identity '\' -server 'Exchange2010.ptdubai.com''.
Microsoft.Exchange.Configuration.MonadDataProvider.CommandExecutionException: Unexpected error [0x7653450B] while executing command 'get-publicfolder -getchildren -identity '\' -server 'Exchange2010.ptdubai.com''. ---> System.NullReferenceException: Object
reference not set to an instance of an object.
at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.GetMapiPublicFolderDatabasesIdentities(ADSystemConfigurationSession configurationSession, ADObjectId serverId, TaskErrorLoggingDelegate errorHandler)
at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.ValidateServerContainsPFDatabase(Server server, ADSystemConfigurationSession scSession, TaskErrorLoggingDelegate errorHandler)
at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.ResolvePublicFolderServerAndUserLegacyDNs(ADSystemConfigurationSession scSession, ServerIdParameter serverIdParameter, String& serverLegacyDN, String& userLegacyDN, Fqdn& serverFQDN,
TaskErrorLoggingDelegate errorHandler)
at Microsoft.Exchange.Configuration.Tasks.GetMapiObjectTask`2.CreateSession()
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.GetTaskBase`1.InternalStateReset()
at Microsoft.Exchange.Management.MapiTasks.GetPublicFolder.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadPipelineProxy.ClosePipeline(MonadAsyncResult asyncResult)
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadPipelineProxy.InternalEndInvoke(IAsyncResult results)
at Microsoft.PowerShell.HostingTools.PipelineProxyBase.EndInvoke(IAsyncResult results)
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadCommand.EndExecute(MonadAsyncResult asyncResult)
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadDataReader.Close()
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadDataReader.Dispose(Boolean disposing)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
at Microsoft.Exchange.Management.SystemManager.DataTableLoader.Fill(RefreshRequestEventArgs e)
at Microsoft.Exchange.Management.SystemManager.DataTableLoader.OnDoRefreshWork(RefreshRequestEventArgs e)
at Microsoft.Exchange.Management.SystemManager.RefreshableComponent.worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Microsoft.ManagementConsole, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
MMCFxCommon, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Microsoft.Exchange.Management.PublicFolders, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Management.SystemManager, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Microsoft.ManagementGUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Common, Version=14.0.631.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.ManagementGUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Configuration.ObjectModel, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Microsoft.Exchange.Diagnostics, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Microsoft.Exchange.Data.Directory, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.PowerShell.HostingTools, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Drawing.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Microsoft.Exchange.ManagementGUI.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Isam.Interop, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Transport, Version=14.0.631.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.PowerShell.HostingTools, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
BPA.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
BPA.UserInterface, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Interop.adsiis, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Interop.Migbase, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.DKM.Proxy, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.AirSync, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Approval.Applications, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.CabUtility, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Cluster.Replay, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Configuration.RedirectionModule, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.ApplicationLogic, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Mapi, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Providers, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Storage, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.EdgeSync.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.EdgeSync.DatacenterProviders, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Extensibility.Internal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.InfoWorker.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Live.DomainServices, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.MailboxReplicationService.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.MessageSecurity, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.MessagingPolicies.Rules, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Net, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Rpc, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Search.ExSearch, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Search.Native, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.StoreProvider, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Agent.AntiSpam.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Agent.SenderId.Core, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Logging.Search, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Sync.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.UM.UMCommon, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.UM.UmDiagnostics.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Rtc.Collaboration, Version=3.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Rtc.Media, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
MSExchangeLESearchWorker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Management.Automation, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Core.Strings, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Core.Strings.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.HelpProvider, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
pspluginwkr, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Management, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
System.DirectoryServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Accessibility, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
MMCEx, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Anonymously Hosted DynamicMethods Assembly, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null
Microsoft.Exchange.Data.Directory.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Configuration.ObjectModel.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
i will be thankful for any assistant.
PF DB is arounf 90 GB with alot of public folders and sub-folders. around 60 mail PF and too many subfolders.

First and the most important thing you need to do is, upgrade exchange 2010 to SP2 and RU5.
Exchange 2010 RTM support is long gone.
http://www.microsoft.com/en-us/download/details.aspx?id=36768
http://www.microsoft.com/en-us/download/details.aspx?id=41480
Your exchange 2010 is still in stogeage ;)
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Unable to manage Distribution list membership since moving from Exchange 2003 to Exchange 2010

Hi,
We have recently started migrating from Exchange 2003 to Exchange 2010. One of our customers used to be able to manage a security group through the outlook address book. This is a mail enabled security group where the customer is on
the "Managed by" entry and the "Manager can update membership list" is ticked.
Now that the users mailbox has been migrated to Exchange 2010, if they try and modify the membership using outlook by finding the group in the address book they get the error "changes to the distribution list membership cannot be saved. you do not have
sufficient permission to perform this operation on this object".
I have now added a test account to the managed by entry on the security group to test the problem.
I have followed the article
http://blogs.technet.com/b/exchange/archive/2009/11/18/3408844.aspx that explains how to use the EMS to give users the right to amend groups that users own. I did not run the script but entered the following commands:
New-ManagementRole -name “MyDistributionGroupsManagement_Test” -parent MyDistributionGroups
Remove-ManagementRoleEntry “MyDistributionGroupsManagement_Test\New-DistributionGroup” -confirm:$false
Remove-ManagementRoleEntry “MyDistributionGroupsManagement_Test\Remove-DistributionGroup” -confirm:$false
New-ManagementRoleAssignment -name “MyDistributionGroupsManagement_Test-Default Role Assignment Pol” -role “MyDistributionGroupsManagement_Test” -policy “Default Role Assignment Policy”
All appears to have worked ok and I have seen no errors while doing this
If I use OWA and then use the ECP, I can now see the "Public groups I own" but no groups are listed.
I have created some new distribution groups in Exchange 2010 (One dist list and one security group) to test and added the test account as an owner of both and a member of both. I still cannot amend the membership using outlook address book and the
ECP still shows no groups under "Public Groups I own"
I have seen a number of articles on how to do this and it looks like I am doing everything right and it has worked for plenty of other people. I just don't know what's going wrong.
I would be very grateful if anyone can help.
Matt

Hi Rajith,
I deleted the outlook profile and recreated it but this did not work.
I have now created a brand new mailbox on Exchange 2010 added this to the "managed by" section of the Exchange 2010 dist lists and I still get the error. I also do not see the groups listed when logging in as that user to OWA ECP and clicking on the
Groups link.
I had a look at the link you sent me and I could see that from the Exchange server when I opened the User roles to get to the ECP, clicked on Roles and Auditing and then User Roles the only policy applied is "Default role assignment". When I select
the details for this, under Distribution groups, "My Distribution Groups" is not ticked but my new one that I created "My DistributionGroupsManagement_Test" is. So this looks ok.
Any other ideas?
Matt

SPAM rules on Inbox after migration from Exchange 2003 - GFI Mail Essentials

Hello,
Few times ago, we had an Exchange 2003 server with mailboxes which were configured with "rulemgmt.exe" tool (from Microsoft ?) to manage users mailboxes and SPAM redirection in these mailboxes.
GFI MailEssentials (antispam) was installed on a mail relay and once a SPAM was detected, it was redirected in Inbox/SPAM folder on user mailbox thanks to the rule defined by "rulemgmt.exe".
Recently, we did a migration from Exchange 2003 to 2010. Unfortunately, "rulemgmt.exe" doesn't work anymore on Exchange 2010 and it's replaced by a "Transport Rule" which works fine but only to redirect SPAMs in Junk e-mail folder. However,
if I don't set up this transport rule, SPAM redirection still works from mailboxes which were created on Exchange 2003 and e-mails go to Inbox/SPAM as before... For new mailboxes on Exchange 2010, it doesn't work which is normal.
My question is: for old mailboxes from Exchange 2003, where are the SPAM redirection (Inbox/SPAM) information stored? I don't understand how SPAM can be redirected if the information is not stored in Exchange...
The aim is to use Junk E-mail folder with the Transport Rule at the end everywhere and to clean old rules used for Inbox/SPAM.
I contact GFI support but they couldn't help me.
Any idea?
Regards,
DeltaSM

Those old mailboxes probably have old rules still set. You can use the Outlook.exe /cleanrules switch to purge those old rules. This would require that you create an outlook profile for each of those impacted mailboxes.
You can also look at using MFCMapi -
http://support.microsoft.com/kb/2860406/en-us
When that is done, you might want to perform a Clean-MailboxDatabase and then look at the mailbox rules (get-inboxrule). If that does not work for you, could be something else within the mailbox and as such, I would recommend working with MS to get
more info.
DaDougInc

How can i import my calendar events from google calendar to ical?

how can i import my calendar events from google calendar to ical?

To set up CalDAV support for Google Calendar in Apple's iCal, follow these steps:
Open Apple iCal, go to Preferences and then the Accounts tab.
Click on the + button to add an account.
In the box that pops up, enter a description for the account and your Google Account username and password.
Under Server Options, add the following URL:
https://www.google.com/calendar/dav/[email protected]/user//www.google.com/calendar/dav/[email protected]/user
Replace '[email protected]' with the email address that you use to log in to Calendar. Make sure to include the '@domain.com' portion (which is @gmail.com for Gmail users) in this section.
DO NOT substitute your username for 'user' at the end of the URL.
Leave the Use Kerberos v5 for authentication option unchecked.
Click Add.
Under the Delegation tab, select the calendars you'd like to add to iCal by checking the boxes next to them. You may need to hit refresh to get the latest list of calendars.
Add your email address to your Address Book card by selecting Add Email. You'll be prompted to add your email address only if your address is not already in your Address Book.
You won't be able to invite or email guests to Google Calendar events within iCal if your address is not in your Address Book.
Your Google Calendar will now appear in iCal's list of calendars, and changes you make to your Google Calendar in iCal will be reflected when you sign in to Google Calendar.
Event information will automatically refresh every five minutes. You can change this interval by opening the iCal > Preferences > Accounts menu and selecting a new refresh interval under the 'Refresh calendars' drop-down. Keep in mind you can also force a refresh by selecting a calendar and pressing the Apple and R keys at the same time.
Calendars that are checked but disabled have already been added to iCal - you can remove them from within iCal.

Create Calendar event from Mail on iPad Mini in landscape

I have an iPad Mini. While in landscape and creating a new calendar event from the body of an email (by selecting the date in the body) I'm unable to get the entire (it is truncated) screen allowing me to set the date and time of the event. It doesn't show the Done button in the upper right.
This works fine on my other devices (iPad and iPhone) in landscape, and also works fine on the iPad Mini in portrait, but it does not work in landscape.
Does anyone else have this problem?

This still works for me in iOS 6.1.3
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Migration from Exchange 2003

Hi,
We are a small business. We currently use Small Business Server 2003 which has Exchange 2003 built-in.
Can we migrate from Exchange 2003 to Mac OS X Server mail services?
Can Office 2011 connect to Mac mail services? If so, what protocols?
Many thanks,
Ciaran.

We are a small business. We currently use Small Business Server 2003 which has Exchange 2003 built-in.
What features of Exchange are you using? Push notifications? Calendaring. Sharepoint? Figure out what you want and what you need (and which are two separate lists) and then map that over to what Mac OS X Server, or to what a Mac box with the Kerio Connect package loaded, might provide you.
Can we migrate from Exchange 2003 to Mac OS X Server mail services?
That's rather open-ended. It's possible, but there's no single definition of small business mail requirements. Some small businesses can and have, and some might find themselves missing critical features.
Can Office 2011 connect to Mac mail services? If so, what protocols?
iWork does well enough to read and write Office files locally, so I don't have experience with Microsoft Office. The Windows mail clients can certainly access Unix mail servers. As for what connectivity is present within Office, I'm way too rusty with Windows to comment. What used to be the Outlook Express client worked just fine with Unix mail servers. The full-on Office Outlook client was pretty flaky with stuff other than Exchange, but that was some years ago.
Biggest issues with SBS migrations tend to be with shared Address Book, with shared Calendars and with Sharepoint services; if you're heavy users of those features, you might find the Mac OS X Server implementations lacking. Kerio can potentially help here.
Look around the forums for some other folks. This particular SBS migration has been fairly common fodder for discussions.

Problem getting calendar event with recurring using EWS Java client API 1.2

I am using EWS 1.2 Java client API for getting calendar events. I am able to get Recurring information of the event which is created through API's
appointment.save(), but not able to get recurring information of the event created in OWA interface, I get following error during the bind:
===================================
Exception: Connection not established
microsoft.exchange.webservices.data.EWSHttpException: Connection not established
at microsoft.exchange.webservices.data.HttpClientWebRequest.throwIfConnIsNull(HttpClientWebRequest.java:394)
at microsoft.exchange.webservices.data.HttpClientWebRequest.getResponseHeaders(HttpClientWebRequest.java:280)
at microsoft.exchange.webservices.data.ExchangeServiceBase.processHttpResponseHeaders(ExchangeServiceBase.java:1045)
at microsoft.exchange.webservices.data.SimpleServiceRequestBase.internalExecute(SimpleServiceRequestBase.java:58)
at microsoft.exchange.webservices.data.MultiResponseServiceRequest.execute(MultiResponseServiceRequest.java:144)
at microsoft.exchange.webservices.data.ExchangeService.internalBindToItems(ExchangeService.java:1364)
at microsoft.exchange.webservices.data.ExchangeService.bindToItem(ExchangeService.java:1407)
at microsoft.exchange.webservices.data.ExchangeService.bindToItem(ExchangeService.java:1430)
at microsoft.exchange.webservices.data.Appointment.bind(Appointment.java:70)
at microsoft.exchange.webservices.data.Appointment.bindToRecurringMaster(Appointment.java:176)
at microsoft.exchange.webservices.data.Appointment.bindToRecurringMaster(Appointment.java:152)
============================
This happens if I use: Appointment.bindToRecurringMaster or Item.bind(service, id, appointmentProps) or findAppointments().
Works fine for events which doesn't have recurring. Only issue with events containing recurrence created through OWA. These are the propertySet:
new PropertySet(BasePropertySet.IdOnly,
ItemSchema.Subject,
AppointmentSchema.AppointmentType,
AppointmentSchema.DeletedOccurrences,
AppointmentSchema.FirstOccurrence,
AppointmentSchema.LastOccurrence,
AppointmentSchema.IsRecurring,
AppointmentSchema.Location,
AppointmentSchema.ModifiedOccurrences,
AppointmentSchema.OriginalStart,
AppointmentSchema.Recurrence,
AppointmentSchema.Start,
AppointmentSchema.End);
If I remove Recurrence it gives the response.
Thanks.

I am using EWS 1.2 Java client API for getting calendar events. I am able to get Recurring information of the event which is created through API's
appointment.save(), but not able to get recurring information of the event created in OWA interface, I get following error during the bind:
===================================
Exception: Connection not established
microsoft.exchange.webservices.data.EWSHttpException: Connection not established
at microsoft.exchange.webservices.data.HttpClientWebRequest.throwIfConnIsNull(HttpClientWebRequest.java:394)
at microsoft.exchange.webservices.data.HttpClientWebRequest.getResponseHeaders(HttpClientWebRequest.java:280)
at microsoft.exchange.webservices.data.ExchangeServiceBase.processHttpResponseHeaders(ExchangeServiceBase.java:1045)
at microsoft.exchange.webservices.data.SimpleServiceRequestBase.internalExecute(SimpleServiceRequestBase.java:58)
at microsoft.exchange.webservices.data.MultiResponseServiceRequest.execute(MultiResponseServiceRequest.java:144)
at microsoft.exchange.webservices.data.ExchangeService.internalBindToItems(ExchangeService.java:1364)
at microsoft.exchange.webservices.data.ExchangeService.bindToItem(ExchangeService.java:1407)
at microsoft.exchange.webservices.data.ExchangeService.bindToItem(ExchangeService.java:1430)
at microsoft.exchange.webservices.data.Appointment.bind(Appointment.java:70)
at microsoft.exchange.webservices.data.Appointment.bindToRecurringMaster(Appointment.java:176)
at microsoft.exchange.webservices.data.Appointment.bindToRecurringMaster(Appointment.java:152)
============================
This happens if I use: Appointment.bindToRecurringMaster or Item.bind(service, id, appointmentProps) or findAppointments().
Works fine for events which doesn't have recurring. Only issue with events containing recurrence created through OWA. These are the propertySet:
new PropertySet(BasePropertySet.IdOnly,
ItemSchema.Subject,
AppointmentSchema.AppointmentType,
AppointmentSchema.DeletedOccurrences,
AppointmentSchema.FirstOccurrence,
AppointmentSchema.LastOccurrence,
AppointmentSchema.IsRecurring,
AppointmentSchema.Location,
AppointmentSchema.ModifiedOccurrences,
AppointmentSchema.OriginalStart,
AppointmentSchema.Recurrence,
AppointmentSchema.Start,
AppointmentSchema.End);
If I remove Recurrence it gives the response.
Thanks.
I am also facing the same problem.. If anyone can help, it would be helpful. I can see the response xml has the data, but while parsing the xml the error is generated in getResponseCode() in HttpClientWebRequest

Why am I getting calendar events twice?

Why am I getting calendar events twice on my iPhone? I am sharing calendar with my wifes iPhone. My duplicates code in the same color, my wife gets duplicates in different colors. I suspect this is a set up problem but help here would be appreciated.

I figured it out. It has to do with which calendars you want displayed. Duplications come from multiple calender selections.

How can I get the events from a java program?

I want to make a monitor to watch a java program.How can I get the events from the GUI of this program some as mouse cliking, keyinput. So I can watch these in my monitor.
Thanks

Hi,
To put a monitor to the events occuring in the GHUI u need to register required components with the appropriate EventListeners.
Liek if u want to get notified when a mouse is clicked, then u need to add The MouseListener to the component which u want to be monitored.
Say
myFrame which is the JFrame object which shuld be monitored for the events.
Then in ur program u have to add following code
myFrame.addMouseListener( someObectReference );
Here the someObjectReference should be an instance to a concrete class ..i.e. U write a class like the following
public class MyMouseListener implements MouseListener {
// override the followig methods
public void mouseClicked(MouseEvent me){ sop("MOUSE CLICKED ON THE FRAME");}
public void mousePressed(MouseEvent me){}
public void mouseReleased(MouseEvent me){}
If u dont want to use another class for listening to the events. Then u can make teh current class monitor the events. To do so ur class should implement the appropriate listener and should override the required methods.
and u should say myFrame.addMouseListenet( this );
thats it

Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

Hi,
Overview of the upgrade progress from Exchange 2003 to Exchange 2010 including the following steps:
Installing Exchange 2010 within your organization on new hardware.
Configuring Exchange 2010 Client Access.
Creating a set of legacy host names and associating those host names with your Exchange 2003 infrastructure.
Obtaining a digital certificate with the names you'll be using during the coexistence period and installing it on your Exchange 2010 Client Access server.
Associating the host name you currently use for your Exchange 2003 infrastructure with your newly installed Exchange 2010 infrastructure.
Moving mailboxes from Exchange 2003 to Exchange 2010.
Decommissioning your Exchange 2003 infrastructure.
For more details, please refer to this following document.
http://technet.microsoft.com/en-us/library/ff805040(v=exchg.141).aspx
Best Regards.

Shared mailbox access from exchange 2003 to 2010 users

We'd successfully migrated from exchange 2003 to 2010. still some of the users are yet to be migrate.
The issue is only in MAC (Apple) Migrated users was unable to access the shared folder residing in 2003 environment.
but the migrated 2010 users are able to access the shared folders in the windows environment.
Any one can assist or suggest this issue.
Awaiting for ur reply.
Regards
kart26

Hi Kart26,
Please install certificate in your MAC App Client.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Can't create Calendar Event from Mail on my iPad anymore

I no longer can create a new iPad Calendar Event from tapping on a date in email I receive. The new Event dialog box will still appear when I click on the date in an email, but the dialog box is now too small and off-center, hiding the Done button in the upper right corner of the Dialog. Without the Done button, I can't create the new Calendar Event. I can't resize the dialog box, or re-center it.
Is this a common problem after the latest iOS update? Can anyone help? Thanks.

This still works for me in iOS 6.1.3
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Exchange 2007 setup, transitioning from Exchange 2003

Hello Exchange Experts,
I just setup a Exchange 2007 within our domain, transistioning from Exchange 2003, question: When I added the mailbox role on the setup of Exchange 2007, the mailboxes appeared instantly from our Exchange 2003..the connector I'm assuming automatically connected
during the 07 setup. Is this normal? I was under the assumption to migrate mailboxes from 03 to 07 Exchange, the wizard must be ran. All active mailboxes from 03 appear. I attempted to migrate one mailbox using the wizard, error after the wizard completed,
mailbox exists. Makes sense, just not understanding how the mailboxes flowed/migrated automatically without running the migration steps. Would someone explain? You could say, this migration is very new to me.
Thanks in advance!
James

Ronny, our company had an existing license for 2007. Of courser 2010 or 2013 would have been a better transition, but 2007 is it. The server 2007 has met all the criteria for the transition, spent last moth prepping everything on 2003 and 2007. I'm just
not understanding why the mailboxes appeared upon 2007 immediately after adding the mailbox role. The management console on 07 shows the mailboxes reside on 03 exchange server. I did not go through the process/wizard to move to 07. Perhaps because
during the installation of Exchange 07 created the connector from 2003? Maybe that's my question.
Mail flow is very responsive now, just wondering for the reasons of decommissioning exchange 2003 at a later date. Exchange 2003 is functioning now as a bridgehead, working perfectly now.
Thanks for your input.
James
Thanks Ronnie for your input! Issue resolved

Getting calendar events from exchange 2003

Similar Messages

Maybe you are looking for