Getting corresponding report with respect to the specific uitlity
Hi
I have 7-reports with same columns but for different 7-utilities(seawater,portable water, gas consumption ...etc). If suppose user enters one utility(seawater) in the selection screen then he/she needs to get corresponding "SEAWATER" report .
Samiliary for other utilities also.
so how can user gets corresponding report with corresponding with specific uility.
pls let me knw
regards
kumar
Hi Kumar
Do you mean that
1. You want 7 reports for 7 utilities with the same column Structure and how can user get these?
If this is the case, create 7 Queries and use the same re-usable structure in the Columns. Then go ahead and rsestrict the Utilities with the specific utilities in Free Char. Give the name as per the Utilities, so that the user can distinguish between these queries.
OR
2. You want one report and user has the choice which utility he wants to run the report for, then....
Create on report with the rows/columsn that you want. Create a variable on the Utilities Info-Object and restrict the Utilities Info-Object with this variable. So user will be prompted to enter this variable for utility and corresponding report will be generated.
Does this answer your question?
Cheers
Abhishek
Similar Messages
-
We get many report with same computer in the SCEP alerts.
Hi,
We get many report with same computer in the SCEP alerts.
I have an email sent to support desk for "Malware detection", but same computer ends upp severaltimes long time after it have been cleand with success. I dont have "repeated malware detection" alerts enable.
So why same alerts reported several times even if it have been removed?
/SaiTechHi,
Please refer to the link below:
How to Configure Alerts for Endpoint Protection in Configuration Manager
http://technet.microsoft.com/en-us/library/hh508782.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I have a use case where I need to use different download directories with different firefox profiles.I need to use this profiles in multiple linux machines.
I need to have a relative path to my download directory with respect to the profile folder.
Ex: I have a selenium test which opens a website and downloads it to my machine.I want this downloaded file to go into some specific folder relative to this profile folder.How do I do this??That is not a practically empty xinitrc - that file only needs one line: exec WM. Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
Is slim involved? Probably. That is the source of many problems. But to start narrowing this down, I have 3 suggestions:
1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
2) at a tty in runlevel 3 use "xinit" instead of "startx". Startx is fine most of the time, but it is essentially just a complex wrapper for xinit. That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult. So for now just use a vanilla 'xinit'.
3) remove dbus-launch from your exec line in xinitrc. This is done by console-kit so it is redundant and potentially problematic. Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them. Just make that line "exec openbox-session"
Edit: adding one more:
4) temporarily switch out openbox-session for openbox. I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
Last edited by Trilby (2012-10-03 17:30:36) -
Synchronization with respect to the memory model
Hi
Can anyone give paste me a link (other than to the JLS itself) that describes the meaning of synchronization with respect to the memory model rather than simply as a means of mutual exclusion?
You read that without synchronization different threads can have inconsistent views of what should be the same data. The link below talks of this issue but says 'the causes of memory consistency errors are complex and beyond the scope of this tutorial.'
http://java.sun.com/docs/books/tutorial/essential/concurrency/memconsist.html
Many thanks
BruceThere are many articles and a few book chapters or
parts thereof that deal with the new memory model,
and of course some key websites. The primary website
is:
http://www.cs.umd.edu/~pugh/java/memoryModel/
Brian Goetz has written a number of articles on IBM's
DeveloperWorks, and of course this is covered in
great depth in "Java Concurrency in Practice" by
Goetz et al.
I also covered it in the threading chapter of "The
Java Programming Language, 4th edition". :)
A few key points:
- access to volatile long/double has always been
atomic (old JMM and Java 5 JMM), but remeber that
access means a simple read, or a simple write,
something like ++ is not atomic because it is a read
followed by a write
- don't think of this in terms of "caches" - that
will lead to the wrong reasoning. It isn't about
flushing caches or writing to main memory (that was
the old conceptual model that just gets people into
trouble because they keep trying to reconcile it with
how the hardware chaching works). The new memory
model is all about establishing happens-before
relations ships between writes and reads of a
variable, so that the value allowed to be returned
from a read is the most recent value that was
written.
I was under the belief that the previous MM was writen in the way that it was in order to allow flexibility in terms of instuction/read/write reordering, caching, synch block merging and any number of other things that may occur, such that vm's on various architectures could be written efficently.
Of course it could have been that vm writers on those various architectures took advantage of the slack nature of the spec to implement all of those non-standard interpretations of the spec :). Its definately a good thing that the spec has been redefined to make it clearer exactly what a java develper should expect.
- the definitive source for this is actuall the
JSR-133 specification. Chapter 17 of the JLS 3e is
based on that spec but doesn't contain the full
details. (But you are better off reading Ch17 than
the proper spec :) )matfud -
Hi All,
I have created a form with 5 blocks (namely ENQACMHDR, ENQACMDTL, ENQACEHDR, ENQACEDTL, ENQACSPEC), where i have 8 push buttons (namely ENTER_QUERY, EXEC_QUERY, CLEAR, FIRST, NEXT, PREVIOUS, LAST & EXIT).
This form is created just for viewing purpose only. So after I execute, all the blocks have been blocked against insert & update.
I query on 2 fields that is 'ENQNO' and 'RATNG' (Both the fields belong to the block ENQACMDTL).
When I click on 'EXEC_QUERY' directly, all the data of all the years populates.
But the user wanted the data to be populated from only the present year and the previous year.
So , on 'WHERE Clause' of the property_palette of 'ENQACMDTL' block , I put in the following condition:
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
PROPERTY PALETTE (ENQACMDTL block)
WHERE Clause
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
Now the data of only the present year and the previous year is being populated. Its ok with the field of 'ENQNO'.
The problem is when i query on field 'RATNG' . 'RATNG' is a Text_item with Number of Items displayed=5. (5 rows)
The following are 2 columns of a Table (Name=ENQACMDTL) in Database.
ENQNO
RATNG
2013900054
500KC2
2013900047
800KC4
2013520018
750KC6
2012900037
1000KC2
2012520109
500KC2
2012140019
750KC6
2011540036
500KC2
2011100030
1000KC2
2006100007
90KD8
2006750014
750KC6
2006900072
500KC2
The first 4 numbers of 'ENQNO' denotes the year. There are more than a lakhs of records.
So when i query on the field 'RATNG',
Example:For RATNG=500KC2;
I click on ENTER_QUERY, On the field of 'RATNG' , i put in the value 500KC2 and click on EXEC_QUERY; Details with respect to 500KC2 is displayed as well as all the other unwanted RATNG like 750KC6, 1000KC2 (which belongs to the ENQNO of the present year and the previous year) also gets displayed.
I want details of only RATNG (500KC2) to be displayed, but only of the present year and the previous year, that is 2013900054, 2012520109 (ENQNO).
Other than 500KC2 RATNG, no other RATNG must be displayed.
The RATNG=500KC2 is also present for ENQNO=2011540036 , 2006900072. But I dont want these to be displayed.
I want only the data or details of the present year and the previous year to be displayed or populated with respect to the given RATNG.
Can You Help me or tell me what do i do for this?
Hope I'm clear with my question!!
If my question is not clear, let me know plz.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle forms 6i.On key-exeqry you have to program. Delete all other trigger codings for checking your condition.
It dint work on key-exeqry.
I tried key-exeqry on form trigger, block (enqacmdtl) and also on field(:enqacmdtl.enqno) , but none of them worked.
It did not display the message.
I have a 'PUSH-BUTTON:EXEC_QUERY.
For EXEC_QUERY, Trigger : WHEN_BUTTON_PRESSED;
I added the following code:
if to_number(substr(:enqacmdtl.enqno,1,4))<to_number(to_char(add_months(sysdate,-12),'YYYY')) then
message('The Rating is not present for the present year and the previous year');message(' ',no_acknowledge);
raise form_trigger_failure;
else
execute_query;
end if;
It is working fine and the message is being displayed.
But again I have a new problem and that is;
On the field :enqacmdtl.enqno, when i enter the '2013%' and press 'EXEC_QUERY', it works fine.
but when i enter '2006%' and press 'EXEC_QUERY', it shows the following error
FRM-50016: Legal characters are 0-9 - +E. It does not display the message also.
but when i enter the complete number, '2006580002', then it works fine , that is it displays the message (The Rating is not present for the present year and the previous year).
The problem is because of '%', only when i put in the restricted data (which does not satisfy where condition).
How do i solve this?
Thank You Priyasagi. -
Expense reports with respect to posting date
Hi Folks,
Kindly let us know if any statndard reports are available to extract trip details with respect to the trip posting date (prrw).
Thanks,
Nandagopal CHi Folks,
The posting date is maintained in the table PTRV_Doc_header. Using the table we have created a query to fetch the posted trips according to posting date.
Thanks,
Nandagopal C -
Hi,
In one of my dll (VS2010), the process Skipping target "MetaGen" because all output files are up-to-date with respect to the input files.
it is at random. I have checked the time stamps of the dll and metagen.write.1.tlog both having the time stamp on the failed build. But all files in release folder did not have the same time. They are one hour earlier than the dll
and the metagen.write.1.tlog.
On the good build it said the input file is is newer than output file ".\Release\\metagen.write.1.tlog" and allfiles in the release folder have same time stamp.
Any clue to solve this ?
Regards,Hi,
Based on your post, I am not very clear about your issue. I feel your issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Could you please provide us more information so that we resolve your issue better?
What type of project are you working with? C++ MFC project?
How was the
metagen.write.1.tlog file generated in your project?
What error messages did you get?
What is the 'input file'?
If possible, please provide us a sample project to reproduce your issue.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I was under the assumption that waveform charts in LabVIEW 6i atomaticly displayed wired data with respect to time in seconds. However, I noticed that my chart plots data with respect to the number of data points my VI has generated. Is there anyway to fix this so that the chart actually plots vs. time. I've attached VI. The CIN is to a Computerboards Inc, thermocouple. Any help would be appreciated.
Attachments:
tepTInScan.VI 73 KBIt appears that the chart is set to display relative time but since you don't have the acquisition in any kind of a loop, your relative time is pretty meaningless. You've got the dX of the chart set to be one, so yeah, at the beginning, the x scale numbers are going to be the same as the number of aquisitions until you've run it more than 60 times. At this point, you'll see the x scale show minutes and seconds. If you want absolute time for the x scale, look at the examples Real-Time Chart.vi or Variable-Time Chart XY.vi.
-
How to get a report "closed" when using the ReportViewerBean
I read the article /people/ted.ueda/blog/2008/12/20/crystal-reports-for-eclipse--ensuring-report-cleanup from Ted Ueda regarding cleaning up reports for the RAS server. However, I'm trying to figure out how to get this accomplished for a thick client accessing a local rpt file and then displaying that file using the ReportViewerBean. I can't seem to get the report closed. I tried the dispose() techniqe from the article, but with no success.
My basic process is:
1) Press button on main frame to open and set up report
2) Pass open report (via ReportClientDocument) object to the viewer frame class (which views report in separate window using ReportViewerBean)
3) Close viewer window when done, destroy ReportVieweBean and close ReportClientDocument
4) Press button again on main frame later to view report
If I set up the report but skip the step of sending the report to the viewer frame, ReportClientDocument.isOpen() will go from true to false after I execute just the ReportDocumentClient.close() command. However, if open the viewer frame, I cannot get the report closed.
In the window closing event for my viewer window I have:
public void quit() {
try {
CrystalReportViewer crv1 = new CrystalReportViewer();
crv1.setReportSource(reportClientDoc.getReportSource());
reportViewer.destroy(); //this is a ReportViewerBean
reportClientDoc.close(); //this is a ReportClientDoc
crv1.dispose();
//the following is always true
System.out.println("ReportClientDoc.isOpen: " + reportClientDoc.isOpen());
this.dispose();
catch(ReportSDKException ex) {
ex.printStackTrace();
catch(ReportSDKExceptionBase ex) {
ex.printStackTrace();
I'm using the latest Java CR4E 12.2.205.825 downloaded from the CR4E website. Any ideas?
Edited by: Joseph Huber on Mar 16, 2010 8:13 PMThe webservices you are trying to use are not the ones used for enterprise, they are used for non-enterprise applications accessing reports that are stored in a specific location on the web server.
Here are samples that use our Enterprise SDK:
[https://boc.sdn.sap.com/samples/84/1193|https://boc.sdn.sap.com/samples/84/1193]
Here are samples that use our Enterprise Web Service SDK:
[https://boc.sdn.sap.com/samples/84/1197|https://boc.sdn.sap.com/samples/84/1197]
You can also look at the SDK documentation available here:
[http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm] -
Getting granular reports with APM
I am trying to find a way to report on the APM. I need to be able to look at particular requests that come in to the server and report how many times that request was made and how long it took so that I can report that this particular function was
run 100 times and of those 100 times it ran longer than 15sec 2 times. The SLA for our app is very detailed in that a particular report must run in say 15sec 95% of the time. Another one might be 30sec 95% of the time. So I need to be able
to look at each particular request that hits the web server and then roll the performance stats by each request. I can see in the reports that it captures the number of requests total for the whole application and how many performance exceptions there
were. Unfortunetely it doesn't break it down by every request. Just the ones that caused the exceptions. I've thought about setting the threshold to 0 so that it would capture all requests but I don't think that would be good for SCOM server.
I'm also thinking that because the threshold is at say 15sec that any details about requests that are less than 15seconds would not be in the database and therefore not reportable. I'd like to know if what I'm trying to do is possible in SCOM and if
I just need a custom report written or if the data is even in the database. Thanks for helping.Hi,
Actually APM is not intended to collect every and each monitored request, it should report only unique performance or exception violations.
Setting the threshold to 0 is not a good idea from performance standpoint, besides you will be overwhelmed with events corresponding to normal behavior of your application. And even this won't solve your problem for sure - some of the events still may
have been throttled and been not reported..
However there are two options for a sort of statistics you need:
1. Based on performance counters
Define each separate request you want to gather statistics as transaction (http://technet.microsoft.com/en-us/library/hh457578.aspx) of monitored application. Thus you will start
collecting separate performance counters metrics for this specific request, among them you will find:
- Average request time
- Number and rate of performance problems
- Number and rate of exceptions
- Number of monitored requests
Yes, these would be only counters without much details, but they represent monitoring statistics regardless the thresholds, throttling and whatever else - just pure statistics.
2. Based on only collected events
I would recommend considering to watch out "Application Slow Requests Analysis" report under "Problem Analysis Reports" of AppAdvisor - this is the most evident insight on the performance trends you're looking for:
Igor Savchenko, VIAcode Consulting LLC (http://www.viacode.com/) -
Is there any way to get Central Sales Tax amount with respect to Purchase Order Numbers. I need this for report.
Pls get me table numbers from whic i can extractYou can link EKBE to BKPF to BSET.
EKBE has the PO number and Material Doc#, BKPF has the Accounting Doc#, and BSET has the tax information. You might need to right a query to get your required list. -
How to create a report with data using the Crystal Reports for Java SDK
Hi,
How do I create a report with data that can be displayed via the Crystal Report for Java SDK and the Viewers API?
I am writing my own report designer, and would like to use the Crystal Runtime Engine to display my report in DHTML, PDF, and Excel formats. I can create my own report through the following code snippet:
ReportClientDocument boReportClientDocument = new ReportClientDocument();
boReportClientDocument.newDocument();
However, I cannot find a way to add data elements to the report without specifying an RPT file. Is this possible? I seems like it is since the Eclipse Plug In allows you to specify your database parameters when creating an RPT file.
is there a way to do this through these packages?
com.crystaldecisions.sdk.occa.report.data
com.crystaldecisions.sdk.occa.report.definition
Am I forced to create a RPT file for the different table and column structures I have?
Thank you in advance for any insights.
Ted JenneyHi Rameez,
After working through the example code some more, and doing some more research, I remain unable to populate a report with my own data and view the report in a browser. I realize this is a long post, but there are multiple errors I am receiving, and these are the seemingly essential ones that I am hitting.
Modeling the Sample code from Create_Report_From_Scratch.zip to add a database table, using the following code:
<%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.document.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.definition.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
<%@ page import = "com.crystaldecisions.report.web.viewer.*"%>
<%
try {
ReportClientDocument rcd = new ReportClientDocument();
rcd.newDocument();
// Setup the DB connection
String database_dll = "Sqlsrv32.dll";
String db = "qa_start_2012";
String dsn = "SQL Server";
String userName = "sa";
String pwd = "sa";
// Create the DB connection
ConnectionInfo oConnectionInfo = new ConnectionInfo();
PropertyBag oPropertyBag1 = oConnectionInfo.getAttributes();
// Set new table logon properties
PropertyBag oPropertyBag2 = new PropertyBag();
oPropertyBag2.put("DSN", dsn);
oPropertyBag2.put("Data Source", db);
// Set the connection info objects members
// 1. Pass the Logon Properties to the main PropertyBag
// 2. Set the Server Description to the new **System DSN**
oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, oPropertyBag2);
oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION, dsn);
oPropertyBag1.put("Database DLL", database_dll);
oConnectionInfo.setAttributes(oPropertyBag1);
oConnectionInfo.setUserName(userName);
oConnectionInfo.setPassword(pwd);
// The Kind of connectionInfos is CRQE (Crystal Reports Query Engine).
oConnectionInfo.setKind(ConnectionInfoKind.CRQE);
// Add a Database table
String tableName = "Building";
Table oTable = new Table();
oTable.setName(tableName);
oTable.setConnectionInfo(oConnectionInfo);
rcd.getDatabaseController().addTable(oTable, null);
catch(ReportSDKException RsdkEx) {
out.println(RsdkEx);
catch (Exception ex) {
out.println(ex);
%>
Throws the exception
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
There was other sample code on SDN which suggested the following - adding the table after calling table.setDataFields() as in:
String tableName = "Building";
String fieldname = "Building_Name";
Table oTable = new Table();
oTable.setName(tableName);
oTable.setAlias(tableName);
oTable.setQualifiedName(tableName);
oTable.setDescription(tableName) ;
Fields fields = new Fields();
DBField field = new DBField();
field.setDescription(fieldname);
field.setHeadingText(fieldname);
field.setName(fieldname);
field.setType(FieldValueType.stringField);
field.setLength(40);
fields.add(field);
oTable.setDataFields(fields);
oTable.setConnectionInfo(oConnectionInfo);
rcd.getDatabaseController().addTable(oTable, null);
This code succeeds, but it is not clear how to add that database field to a section. If I attempt to call the following:
FieldObject oFieldObject = new FieldObject();
oFieldObject.setDataSourceName(field.getFormulaForm());
oFieldObject.setFieldValueType(field.getType());
// Now add it to the section
oFieldObject.setLeft(3120);
oFieldObject.setTop(120);
oFieldObject.setWidth(1911);
oFieldObject.setHeight(226);
rcd.getReportDefController().getReportObjectController().add(oFieldObject, rcd.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0), -1);
Then I get an error (which is not unexpected)
com.crystaldecisions.sdk.occa.report.lib.ReportDefControllerException: The field was not found.---- Error code:-2147213283 Error code name:invalidFieldObject
How do I add one of the table.SetDataFields() to my report to be displayed?
Are there any other pointers or suggestions you may have?
Thank you -
Data filtering in XML report with out changing the underlying query
Hi, This is Nagesh and from Verizon.
I'm testing Query based XML report in Peoplesoft 9.1 app with tools version 8.5.
I'm trying to filter the data on XML Report template with out changing the underlying PS query. I mean filter the data on the report to only specific accounts though the underlying PS query query return transactions booked to all Accounts for a given Legal Entity. Is it possible. any advise or idea is highly appreciated.
Thanks
AgesIf the value is not of importance how come it became obligatory in your program?
Any how you can do one thing...Put some value in your obligatory field, put a debugger point where you are interested in and use the pencil tool to change the value of the field while debugging.
Regards,
Philip. -
How to develop a report with current price & the last price in the pre.yrs
hi ,
guys,
my client want a report to list of material with respective vendor and to make a price comparison betn the current price & the last price in the privious year.
can any one help how to develop the report, shall go for generic extrc.
thanks in advace.
ramnathCR CR 2011 / "Crystal reports For Visual Studio 2010", you are correct.
Re. the database thinggy. You can connect to a database via ODBC, OLE DB or in some instances natively. Once a report is created you an change the datasource. A good sample app on how to do this is csharp_win_dbengine / vb_win_dbengine. A link to the samples is here:
Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
More info on connecting to dbs and changing them is in the developer help files:
SAP Crystal Reports .NET SDK Developer Guide
SAP Crystal Reports .NET API Guide
More info on CR APIs for .NET (applies to all versions of CR and VS):
Crystal Reports for Visual Studio 2005 Walkthro... | SCN
You can also use ADO .NET Datasets and in this way you handle the database connections in your app. A good sample is csharp_win_adodotnet (also available in VB) - same link as above.
More info on datasets:
Crystal Reports Guide To ADO.NET
Crystal Reports for Visual Studio .NET - Walkthrough - Reporting Off ADO.NET Datasets
For more complicated operations (e.g.; changing a report from ODBC to OLE DB, changing one table, etc., you will want to use the InProc RAS SDK that is also available in CRVS. Developer help files are here:
Report Application Server .NET SDK Developer Guide
Report Application Server .NET API Guide
Sample apps are here:
NET RAS SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
and here:
Crystal Reports .NET In Process RAS (Unmanaged) SDK Sample Applications
More info on RAS SDK:
How to Use The RAS SDK .NET With In-Process RAS Server
Lastly, do use the search box in the top right corner. I find simple search strings such as 'crystal net parameter' return best results (KBAs, Blogs, docs, wikis, discussions and more).
- Ludek -
How can I get a report with total number of pages printed on my HP Officejet Pro 8610?
Since knowing the number of pages I print is so critical to a choice of using the "HP Instant Ink Plan" or not, how can I find the total number of pages I have printed on my brand-new (installed 2 days ago) 8610? And if I can, is it a "resettable" or rolling total? Don't see anything in user guide and a search yields nothing usable on this blog.
Printer is installed wirelessly on an older PC with Windows XP SP3. I can also of course intstall it with network cable but so far it works OK on my home network without network cable. If it matters which OS, I also have a Lenovo laptop running Vista on which I can install this printer.
Please do not respond that I can find the total by counting the number of pieces of paper I have. Surely the internals of this fine machine must have the requested data so that HP can tell my usage if I select the monthly ink plan!
This 8610 was a good buy (net $89.00 after trade-in of my six year old J36xx Deskjet) at Office Depot/Max which of course influenced my decision to buy it. So far I am very happy with printing qualities and speed, have not tried the scanner yet and will probably never use the fax since I have no land line phone.
Thanks,
Harry
This question was solved.
View Solution.Hi,
Section #2 of the Printer Ststus report will tell you. Please try:
Printer status report
Use the printer status report to view current printer information and ink cartridge status. Also use the printer status report to help you troubleshoot problems with the printer.
The printer status report also contains a log of recent events.
If you need to call HP, it is often useful to print the printer status report before calling.
To print the Printer Status Report
1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup.
2. Touch Print Reports and then touch Printer Status Report.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Maybe you are looking for
-
How to display text on last but one page in SAPSCRIPTS
how to display text on last but one page in SAPSCRIPTS
-
Sound no longer working after graphics card installation
Okay, so my problem is: I recently added a graphics card to my windows 8.1 PC. The card itself works fine (a GTX 750Ti), but since installing it my sound no longer works from either port. Things I have already tried: Rebooting (obviously) Taking the
-
HT2486 How to backup my Macbook Air Contacts?
I would like to periodically backup my Contacts in my Macbook Air. How do I do it?
-
Flex Developer in Alpharetta,GA
I am looking for a seasoned Flex/RIA developer to join my team on a green-field development project. This is a contract or full-time position. We are a small agile development team and will be developing a diagnostic and provision system for cable ne
-
Display 2 rows per entry with ALV Grid
Hi Experts, I need to display the results of a report with ALV Grid. The Problem is: I need to display the resultdata (some numbers etc..) in one row and then add a second row with the longtext. The ALV should look somthing like this: resultdata1 res