Getting dump for every senario
Hi experts
I am new to workflow i am getting dump on execution of every senario......
i am providing code of that one.... plz help me.
The following syntax error occurred in the program
CL_SWF_RUN_WIM_LOCAL==========CP :
"You can only define attributes in the PUBLIC, PROTECTED or PRIVATE sec"
Error in ABAP application program.
The current ABAP program "CL_SWF_RUN_WIM_FACTORY========CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Thanks,
Prasad.
Hi,
This class CL_SWF_RUN_WIM_LOCAL is essential in tRFC to Execute the workflow.
The class would have affected.
1) Check any User exit or Badi used related to this Class, if so Deactivate those and check.
2) Then Still you getting the dump, check for note corrections.
Regards,
Surjith
Similar Messages
-
Excise invoice getting split for every 2 line items in J1IS
Dear Experts,
While doing J1IS - Excise invoice getting split for every 2 line items.
can anybody help me.
regards,
sri ramHi,
Please check the maximum number of line items per excise invoice under customizing
logistics general->Tax on goods movement->India->Basic settings->Maintain excise registration->check for EI items.
I think it is defined as 2.
Regards,
Krishna A S V -
Modem - router getting reset for every 15 mins
My modem and router gets reset for every 15mins and every time I call Comcast not getting proper support . Can someone hear this. This happens every weekend.
freezing at regular intervals:
:http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
: https://addons.mozilla.org/firefox/addon/places-maintenance/
Install add-on, run at least the option mentioned in the article, I ran them all. When finished you can uninstall the extension, all without taking taking Firefox down, The extension is one of the new JetPack extensions. -
I am getting message for every app connect to iTunes to push notification
I am getting message for every app connect to iTunes to push notification
I had the same problem too!
But after i changer the usb cable , everything went back to normal
hope it help! -
Get appointments for every room
There's any way to get all the appointments of each room? With EWS I have only found how to do this with the appointments of each calendar but i haven't found how to do it for get all the appointments divided in Rooms.
I want to show the name of every room followed by all his appointments.
Thanks!There may be an easier way to accomplish your end goal. Question for you first though, what is the reason you want to see every appointment for every room all at once?
-
Getting message for every record while pressing down arrow key:apps form
Hi,
when i query the form and when I am going through the records by pressing the down arrow of the keyboard I am getting the message 'Do you want to Save the records' for every record even though i did not update any record
How to avoid the message?
I developed the form in oracle applications and it is a master detail form which have a header block and lines block.
thanks & regards
DeekshitHello,
You can review the following;
https://metalink.oracle.com/metalink/plsql/f?p=200:27:627127677634310554::::p27_id,p27_show_header,p27_show_help:173383.995,1,1
Hope it helps.
Adith -
Getting message for every record while pressing the down arrow
Hi,
when i query the form and when I am going through the records by pressing the down arrow of the keyboard I am getting the message 'Do you want to Save the records' for every record.
How to avoid the message?
I developed the form in oracle applications and it is a master detail form which have a header block and lines block.You are probably changing a value in POST-QUERY trigger, check your trigger and make sure you're not updating any values.
For Oracle Apps specific questions, I suggest you post in the E Business Suite section of the Forums.
Tony -
Query for getting data for every quarter for financial year
Hi,
My problem is I need to get the data for every quarter for financial year and also I need data for every week for financial year.
For example for financial year 2012-13, Apr2012 to Jun2012 would be Q1, Jul2012 to Sep2012 would be Q2 and so on. Total 8quarters should come upto Apr2013.
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.lakmesri wrote:
Hi,
My problem is I need to get the data for every quarter for financial year and also I need data for every week for financial year.
For example for financial year 2012-13, Apr2012 to Jun2012 would be Q1, Jul2012 to Sep2012 would be Q2 and so on. Total 8quarters should come upto Apr2013.
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.
How can you get 8 quarters within a year ? I'b be concerned here.
lakmesri wrote:
Hi,
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.
First, that question is really not clearly asked. Second how could it be urgent ? You even did not tell us your Oracle version, did not show any tables descr, output sample nor any effort on your side to work on.
Nicolas. -
BW: Not getting Dump For Program error in Process Chain
I have one issue regarding Master data loading issue in BW(3.5).
My business flow like we have received data from server A and Server A extract data from Server B and
Server B which is extract data from source(R/3).
Flow like this R/3-->Server B-->Server A(ETL) -
> My Server.
We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
But lastdays process chain paticular process stills remains yellow?
We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
Note: it will be helpful for me if any one know how to check dump for program errors in Process chain as narated issue.Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM -
Getting Image for every 2 second using AVI stream
Hello,
Could I save image for every 1 or 2 second from AVI stream (not file). It is because I have a piece of software which could capture image on live and could save the image as AVI format. However, I need the file format as JPEG format for every 1 or 2 second.Am I do it like this?
Thanks
fkliWhy don't you get a simple jpeg obtained by ftp from your program? For example I've downloaded a ftp server named webcam32 (http://www.surveyorcorp.com/webcam32) that replaces a jpeg image by ftp every second. After that, it was rather easy to write an applet that displays the updated image. Most probably your program can do that for you.
Hope yu'll find this useful. -
Mail sent by the program are getting appended for every line item in ITAB.
Hello Experts,
My program has to send mail for every line item in my internal table. Each line itme will provide the data to be filled in body of the mail .Now the problem is when i recieve mail in outlook the body of the mail is getting appended every time i recieve the mail
For example , if the mail has to go for 3 entry in itab out of five then i'm getting 3 mails but 2nd has body of 1 also and 3d has body of 1st and 2nd.
I'm using loop - endloop and it is happening due to this but is there any other way out to send mails for each line without body getting appended.
Please see the code below i'm using:-
LOOP AT lt_bg INTO lw_bg.
PERFORM populate_message_table.>>>>>>Preparing body
PERFORM send_email_message.>>>>>>>>> need to capture in loop as evry line itme has distinct subject of mail
ENDLOOP.
PERFORM initiate_mail_execute_program.
Thanks,
NaveenHi,
I'm using Clear wa and refresh ITAB but still i'm getting the body appended.
Thanks -
Getting Dump for depreciation run
Hello
While taking the depreciation run thr tcode AFAB one background job is created for posting the depreciation value.
But this background job is terminated giving short dump for INSERT BSEG statement.
runtime error DBIF_RSQL_INVALID_REQUEST is raised.
But the same transaction works fine on quality server with same parameters.
What might be the reason?? How to trace the reason??i think insertions in table bseg is not allowed on server u r working on..
plz reward points if this helps -
Session gets created for every request.
Hi ,
I have two servlets where i set a object in the session in one servlet say servlet1.java and get in another servlet say servlet2.java.
When i pass my session object from servlet1 to servlet 2 , servlet2 is supposed to get the arrtibute , but its always gives me a null value.
I found out that a new session is getting created every time when i try to access servlet2.
I tried to print the session object , and it clearly tells me that the object is differet from the one i set.
Can anyone let me know why is this happening and how do i solve this .
This happens for me in weblogic 8.1 setup.
In my JBOSS set up with the same code it works fine.
Thanks in advance.Sasikanth,
Pardon me if I am stating the obvious, but according to your description the problem is with WebLogic. So did you try a WebLogic specific forum?
Good Luck,
Avi. -
Queue is getting struck for every delta change in CRM 5.0
Hi Middleware gurus,
The queues are getting struck with status 'READY' for each of these following scenarios:
1. Individual new sales order upload from CRM to R/3 (CRM - SMQ1)
2. Individual sales order delta changes upload from CRM to R/3 (CRM - SMQ1)
3. Individual new materials donloaded into CRM from R/3 (CRM - SMQ1)
4. Material delta change download from R/3 to CRM (CRM - SMQ2)
5. Knowledgebase delta changes download from R/3 to CRM (CRM - SMQ2)
I have to manually release the queue everytime, so that the changes can be uploaded. Am I missing something?
By the way individual new sales order created in R/3 and delta changes on R/3 orders are getting replicated into CRM without any problem.
Thanks,
KishoreHi Kishore,
We had similar issue before. Do not use the replication scenarios X,Y or Z. You have use the scenario A which will solve your problem for sales order replication issues. Please refer to the note 705200. For rest of issues make sure in both the systems the queue scheduler is running. If not running actively then register the each queue in both the systems using SMQS and SMQR. If still the issue is not solved then let me know.
Award points, if the issue is solved
Cheers,
Paul Kondaveeti -
Import from DDL script - Why do I get domains for every column type?
I've only been using Data Modeler for a day and my first task was to import a database definition from a DDL script.
I noticed that every column definition resulted in the creation of a domain for the column type, with names like "VARCHAR_0_0_30" for a varchar2(30) type.
Is there some way of avoiding the creation of domains in this way? I'd prefer to use domains only when they serve a more useful purpose such as validation by check constraints.Go to Preferences - > Data Modeler - > DDL and uncheck "Create Domains During Import" option.
Ivan
Maybe you are looking for
-
Not able to transfer data via bluetoth between macbook pro and iPhone
i just bought a new iphone 4s. as i wanted to transfer a few songs i switched on the bluetooth of my macbook pro and iphone 4s. but to my surprise iphone 4s did not detect my macbook. please suggest a solution.
-
Material allocation for a customer with a SO
Hi, Is it possible to allocate a stock against a customer even though the SO is not available in the system. If yes then how this is possible in APO? regards, Mohit
-
Dolby Digital dropouts on Apple TV
I have the latest model ATV connected via HDMI to an Arcam receiver which can decode Dolby Digital via that cable. The ATV is connected to my network via ethernet but I get regular dropouts of DD sound – the sound disappears for a second or two and t
-
Tool bench / Waveform monitor / video scopes- brightness of display problem
the display in my tool bench, and specifically in the waveform monitor, is too dark to read. Happily in the upper left corner, jsut below the "Video Scopes" tab, there are two buttons to adjust: click to set scale brightness click to set display brig
-
i purchased OS X but i didn't mean to... how do i un-purchase it?