Getting dump like LIST_TOO_MANY_LPROS

Hi Friends,
I have created a Dialogue program with 6 subscreens with 3 normal screens.
after doing some processing from Subscreen and to navigate to other screens , I am using Call screen.
The leave to screen XXX is throwing error.
If i use call screen statement often , it is throwing error like LIST_TOO_MANY_LPROS.
Can you please help me with different alternate ways to handle this situation.
When calling screens from Subscreens.
Thanks,
Gokul

The specified item was not found.
dump [LIST_TOO_MANY_LPROS|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/dump-list_too_many_lpros-363302]

Similar Messages

Getting dump when using do_sum in alv field cat in the output of the report

Dear Freinds,
             Iam getting the alv report when i click on the segma field (Sum) on my salary
field iam getting dump. and also if i try to print my alv output iam getting dump , only
happening to my custom report.
i have used the following code pleae correct me .
This perform is used for Layout settings
perform st_layout_build using gs_layout.
form st_layout_build using st_ls_layout type slis_layout_alv.
   st_ls_layout-no_input          = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra             = 'X'.
st_ls_layout-detail_popup      = 'X'.
endform.                    " st_layout_build
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 1.
ls_fieldcat-fieldname    = 'ORGUNIT'.
ls_fieldcat-seltext_l    = 'Orgunit'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 2.
ls_fieldcat-fieldname    = 'ORGTEXT'.
ls_fieldcat-seltext_l    = 'Orgdesc'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname    = 'SALARY'.
ls_fieldcat-seltext_l    = 'Salary'.
ls_fieldcat-col_pos      = 3.
ls_fieldcat-outputlen   = 15.
ls_fieldcat-do_sum       = 'X'.
ls_fieldcat-datatype     = 'CURR'.    "CURR
append ls_fieldcat to fp_i_fieldcat.
endform.
Variant
perform st_variant_init using gs_variant g_repid.
form st_variant_init   using st_gs_variant type disvariant
                             st_repid      like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform.                    " st_variant_init
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
form st_comment_build using   st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform.                    " st_comment_build
     call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
         i_buffer_active        = 'X'
        i_callback_top_of_page = 'TOP_OF_PAGE'
        i_callback_program     = g_repid
        is_layout              = gs_layout
        it_fieldcat            = gt_fieldcat[]
       i_structure_name       = 'i_final'   "c_i_final "'objec'
       i_save                 = g_save
        is_variant             = gs_variant
      tables
        t_outtab               = fp_i_pyrol_final
      exceptions
        program_error          = 1
        others                 = 2.
    if sy-subrc ne 0.
      message e018. " Displaying the ALV GRID has failed
    endif.
Please could any one let me know why iam getting dump when iam clicking for total
on my salary field.
Regards
latha

Dear Chandu,
my code iam giving in details
types : begin of ty_output_data,
        staffno     type pernr_d,
        staffname   type emnam,
        grade       type stell,
        orgunit     type orgeh,
        orgtext     type hr_mcstext,
        psgroup     type trfgr,      " Pay Scale Group
        salary      type maxbt,       "PAD_AMT7S,
        rrefunded   type pad_amt7s,
        leavepay    type pad_amt7s,
        mshortfal   type pad_amt7s,   " Medical Shortfall
        echkshfal   type pad_amt7s,   " Execute checkup shortfall
        ofindeduc   type pad_amt7s,   " Other Finance Deduction
        mtyprem     type pad_amt7s,   " maternity premium
        vpbonus     type pad_amt7s,   " VP/Bonus
        gratuity    type pad_amt7s,   " Gratuity
        vpay        type pad_amt7s,   " Variable pay
        mallowance type pad_amt7s,   " Meal Allowance
        overtime    type pad_amt7s,   " overtime
        other       type pad_amt7s, " OTHER
        pfundeecon type pad_amt7s,   " PFund Employee's Contribution
        banktrnsfer type pad_amt7s,   " Bank Transfer
        count       type i,
        end of ty_output_data.
data : i_final         type standard table of ty_output_data.
iam getting all my data in the internal table I_FINAL.
perform get_final_alv using i_final.
form get_final_alv using   fp_i_pyrol_final type ty_t_output_data.
*local variable declarations
data : l_v_idx      type sy-tabix.
*local work areas
data : l_wa_final type ty_output_data.
g_save = 'A'.
This perform is used for Layout settings
perform st_layout_build using gs_layout.
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
Variant
perform st_variant_init using gs_variant g_repid.
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
if not fp_i_pyrol_final is initial.
    delete adjacent duplicates from fp_i_pyrol_final comparing all fields.
    call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
         i_buffer_active        = 'X'
        i_callback_top_of_page = 'TOP_OF_PAGE'
        i_callback_program     = g_repid
        is_layout              = gs_layout
        it_fieldcat            = gt_fieldcat[]
       i_structure_name       = 'i_final'   "c_i_final "'objec'
       i_save                 = g_save
        is_variant             = gs_variant
      tables
        t_outtab               = fp_i_pyrol_final
      exceptions
        program_error          = 1
        others                 = 2.
    if sy-subrc ne 0.
      message e018. " Displaying the ALV GRID has failed
    endif.
endif.
endform.                    " get_final_alv
form st_layout_build using st_ls_layout type slis_layout_alv.
   st_ls_layout-no_input          = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra             = 'X'.
st_ls_layout-detail_popup      = 'X'.
endform.                    " st_layout_build
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 1.
ls_fieldcat-fieldname    = 'ORGUNIT'.
ls_fieldcat-seltext_l    = 'Orgunit'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 2.
ls_fieldcat-fieldname    = 'ORGTEXT'.
ls_fieldcat-seltext_l    = 'Orgdesc'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 5.
ls_fieldcat-fieldname    = 'STAFFNAME'.
ls_fieldcat-no_out       = 'X'.
ls_fieldcat-seltext_l    = 'StaffName'.
append ls_fieldcat to fp_i_fieldcat.
   clear ls_fieldcat.
ls_fieldcat-col_pos      = 4.
ls_fieldcat-fieldname    = 'STAFFNO'.
ls_fieldcat-no_out       = 'X'.
ls_fieldcat-seltext_l    = 'StaffNo.'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 6.
ls_fieldcat-fieldname    = 'GRADE'.
ls_fieldcat-seltext_l    = 'Grade'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 3.
ls_fieldcat-fieldname    = 'COUNT'.
ls_fieldcat-seltext_l    = 'Headcount'.
append ls_fieldcat to fp_i_fieldcat.
if the field name is 'Salary' then do a sum on this field.
IF fp_fname = c_betrg.
    l_wa_fieldcat-do_sum    = c_x.
ENDIF.
NOTE : IAM GETTING PROBLEM IN THE BELOW SALARY.
IAM JUST CHECKING ITSELF NOT ALLOWING ME TO EXECUTE
clear ls_fieldcat.
ls_fieldcat-fieldname    = 'SALARY'.
ls_fieldcat-seltext_l    = 'Salary'.
ls_fieldcat-col_pos      = 7.
ls_fieldcat-outputlen   = 20.
ls_fieldcat-do_sum       = 'X'.
ls_fieldcat-datatype     = 'CURR'.    "CURR
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 9.
ls_fieldcat-fieldname    = 'LEAVEPAY'.
ls_fieldcat-seltext_l    = 'Leave Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 10.
ls_fieldcat-fieldname    = 'MSHORTFAL'.
ls_fieldcat-seltext_l    = 'Med.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 11.
ls_fieldcat-fieldname    = 'ECHKSHFAL'.
ls_fieldcat-seltext_l    = 'EX.Chckup.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 12.
ls_fieldcat-fieldname    = 'OFINDEDUC'.
ls_fieldcat-seltext_l    = 'Oth.Fin.Deduction'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 13.
ls_fieldcat-fieldname    = 'MTYPREM'.
ls_fieldcat-seltext_l    = 'Mat.Premium'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 14.
ls_fieldcat-fieldname    = 'VPBONUS'.
ls_fieldcat-seltext_l    = 'VP/Bonus'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 15.
ls_fieldcat-fieldname    = 'GRATUITY'.
ls_fieldcat-seltext_l    = 'Gratuity'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 16.
ls_fieldcat-fieldname    = 'VPAY'.
ls_fieldcat-seltext_l    = 'Variable Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 17.
ls_fieldcat-fieldname    = 'MALLOWANCE'.
ls_fieldcat-seltext_l    = 'Meal.Allowance'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 18.
ls_fieldcat-fieldname    = 'OVERTIME'.
ls_fieldcat-seltext_l    = 'Overtime'.
append ls_fieldcat to fp_i_fieldcat.
    clear ls_fieldcat.
ls_fieldcat-col_pos      = 19.
ls_fieldcat-fieldname    = 'OTHER'.
ls_fieldcat-seltext_l    = 'Other'.
append ls_fieldcat to fp_i_fieldcat.
pfundeecon
clear ls_fieldcat.
ls_fieldcat-col_pos      = 20.
ls_fieldcat-fieldname    = 'P FUND EMPLOYEES CONTRIBUTION'.
ls_fieldcat-seltext_l    = 'P.Fund.Emp.Contrib'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 21.
ls_fieldcat-fieldname    = 'BANKTRNSFER'.
ls_fieldcat-seltext_l    = 'Payment'.
append ls_fieldcat to fp_i_fieldcat.
endform.                    " st_fieldcat_init
form st_variant_init   using st_gs_variant type disvariant
                             st_repid      like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform.                    " st_variant_init
form st_comment_build using   st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform.                    " st_comment_build
      FORM TOP_OF_PAGE                                              *
form top_of_page.
data: l_i_detailheader type slis_t_listheader.
To get the header for ALV
perform detail_header changing l_i_detailheader.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      it_list_commentary = l_i_detailheader.
endform.                    "top_of_page
form detail_header changing fp_i_detailheader type slis_t_listheader.
data: l_wa_header       type slis_listheader,
        l_v_time         type slis_edit_mask,
        l_v_date         type slis_edit_mask,
        l_v_abkrs        type char5,
        l_v_pabrj        type char8,
        l_v_pagno        type char10.
Local Constants
constants: l_c_h type char1 value 'H',
             l_c_1 type i     value '1',
             l_c_edit type char10 value '__.__.____',
             l_c_slash type c value '/'. " constant for slash
To display the report Header
l_wa_header-typ = l_c_h.
WRITE sy-repid TO l_wa_header-info LEFT-JUSTIFIED.
write text-014 to l_wa_header-info left-justified.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To display the Page no
l_v_pagno =   sy-pagno + l_c_1.
l_wa_header-typ = c_s.
l_wa_header-key = text-008. " Page No:
l_wa_header-info = l_v_pagno.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the User ID
l_wa_header-typ = c_s.
l_wa_header-key = text-009. " User ID
l_wa_header-info = sy-uname.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the Date/Time
l_wa_header-typ = c_s.
l_wa_header-key = text-010. " Date/Time:
l_v_time = sy-uzeit.
l_v_date = sy-datum.
write: sy-uzeit to l_v_time.
write sy-datum to l_v_date using edit mask l_c_edit.
concatenate l_v_date
              l_c_slash
              l_v_time into l_wa_header-info+0(25) separated by space.
append l_wa_header to fp_i_detailheader.
clear: l_wa_header, l_v_date.
To Display the Report Description
l_wa_header-typ = c_s.
l_wa_header-key = text-011.                " Report Description
l_wa_header-info = text-012.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
append l_wa_header to fp_i_detailheader.
endform.                    " detail_header
I will be greatful if any one can please help me in removing me the dump.
REGARDS
LATHA.

Getting dump with message CALL_FUNCTION_GET_NAME_FAILED

Hi,
My requirement is to write a report which will be run in background every Monday and the result will be sent to a user as email with excel as attachment.
I tried it by giving the email in 'Spool list recipient' in SM36. ut since the length of the output is more than 255 chars, so i thought of writing the email code as shown below.
DATA: l_message_content LIKE soli OCCURS 10 WITH HEADER LINE,
 l_receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
 l_packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
 l_listobject LIKE abaplist OCCURS 10,
 l_compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
 lw_object_hd_change LIKE sood1,
 l_compressed_size LIKE sy-index.
l_receiver_list-recnam = sy-uname .
l_receiver_list-esc_des = 'B'.
APPEND l_receiver_list.
lw_object_hd_change-objla = sy-langu.
lw_object_hd_change-objnam = 'Selection'.
lw_object_hd_change-objsns = 'P'.
Mail subject
lw_object_hd_change-objdes = 'KRB SAP Inconsistency Report'.
Mail body
APPEND 'Consisteny report between KRB and SAP' TO l_message_content.
CALL FUNCTION 'TABLE_COMPRESS'
 IMPORTING
 compressed_size = l_compressed_size
 TABLES
 in = <fs_table>
 out = l_compressed_attachment.
DESCRIBE TABLE l_compressed_attachment.
CLEAR l_packing_list.
l_packing_list-transf_bin = 'X'.
l_packing_list-head_start = 0.
l_packing_list-head_num = 0.
l_packing_list-body_start = 1.
l_packing_list-body_num = sy-tfill.
l_packing_list-objtp = 'ALI'.
l_packing_list-objnam = 'Selection'.
l_packing_list-objdes = 'SAP KRB Consistency Report'.
l_packing_list-objlen = l_compressed_size.
APPEND l_packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
 EXPORTING
 object_hd_change = lw_object_hd_change
 object_type = 'RAW'
 owner = sy-uname
 TABLES
 objcont = l_message_content
 receivers = l_receiver_list
 packing_list = l_packing_list
 att_cont = l_compressed_attachment.
I am getting the mail which i checked in SBWP but when i clicked on the attachment i am getting dump with message CALL_FUNCTION_GET_NAME_FAILED.
Short text
 Error when starting a Remote Function Call.
What happened?
 "CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
 error) "
 An error occurred when executing a Remote Function Call.
Error analysis
 An error occurred when executing a Remote Function Call.
 "CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
 error) "
 Status of connection.... "RFC DRV=??? ???"
 Internal error code.... "RFC_IO4"
 Internal error: Invalid RFC handle.
Trigger Location of Runtime Error
 Program SAPMSSY1
 Include SAPMSSY1
 Row 266
 Module type (FORM)
 Module Name XAB_RUN_DRIVER
Please help in this.
<removed by moderator>
Edited by: Thomas Zloch on Sep 14, 2011 11:57 AM

Hi,
Check your RFC Connection Configuration. Also, check the used username & password.
Reward points if the asnwer is helpful.
Regards,

Getting dump in my Z program

hi,
i am getting dump in my below code in the delete statement line.actually previously it worked fine but now suddenly we r getting dump in the second delete statement below.can some body tell me the reason.
error analysis: You attempted to change, delete or create a line in the
internal table "\PROG=YBDISEMAT\DATA=INT_MARC", but no valid cursor exists
for the table.
Possible reasons:
1. The relevant ABAP/4 statement does not include the addition
   "...INDEX...", although the statement is not
   inside a "LOOP...ENDLOOP" loop processing this table.
2. The relevant ABAP/4 statement was called from within a
   "LOOP...ENDLOOP" loop after a DELETE "\PROG=YBDISEMAT\DATA=INT_MARC".
LOOP AT int_marc INTO wa_marc.
        IF wa_marc-werks IN ra_source.
          READ TABLE int_disgr WITH KEY zdisgr = wa_marc-disgr
                                        zwerks = wa_marc-werks.
          IF sy-subrc NE 0.
            DELETE int_marc.
          ENDIF.
        ENDIF.
        IF wa_marc-werks IN ra_zmdc.
          READ TABLE int_disgr WITH KEY zdisgr = wa_marc-disgr
                                        zwerks = wa_marc-werks.
          IF sy-subrc NE 0.
            DELETE int_marc. _______________________________________________ getting dump here
          ENDIF.
        ENDIF.
        CLEAR wa_marc.
      ENDLOOP.

Hi.
First of all deleting an internal table inside the loop is not a good practise ..You are deleting the same internal table that you are looping..
Instead of that you can make a small modification to your code.
LOOP AT int_marc INTO wa_marc.
IF wa_marc-werks IN ra_source.
READ TABLE int_disgr WITH KEY zdisgr = wa_marc-disgr
zwerks = wa_marc-werks.
IF sy-subrc NE 0.
move 'X' to any field in the internal table.
or you can have an additinal field in the end of the internal table like flag type char01.
and move 'X' to wa_marc-flag.
ENDIF.
ENDIF.
Now outside the loop you can delete
delete int_marc where flag = 'X'.
Regards
Ansari

Getting Dump at the time of opening WF

Hi,
we had created workflow WS93600011 in our development server. Till Friday 10.07.2009 it was working fine. We did some small change and activated the workflow. Till that time we were able to open the workflow template. On 13.06.2009 when we tried to open the workflow then it was giving dump, so accordingly we checked is this the problem with only 1 workflow template or all the workflow templates and we found that this is the problem with only 1 workflow template not all. So accordingly we did some analysis and I tried to check whether any SAP OSS Notes needs to be implemented but all the notes are already in place.
Please see below the what dump says...
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
Except. CX_SY_REF_IS_INITIAL
Date and Time 07/20/2009 13:30:44
Short text
Access via 'NULL' object reference not possible.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "CL_WFD_TASK_PROXY=============CP" had to be
 terminated because it has
 come across a statement that unfortunately cannot be executed.
What can you do?
 Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look at and manage termination messages, and you can also keep them for a long time.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "CONSTRUCTOR" "(METHOD)", nor was it propagated by a RAISING clause. Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated. The reason for the exception is: You attempted to use a 'NULL' object reference (points to 'nothing') access a component. An object reference must point to an object (an instance of a class) before it can be used to access components. Either the reference was never set or it was set to 'NULL' using the CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
 If the error occures in a non-modified SAP program, you may be able to find an interim solution in an SAP Note. If you have access to SAP Notes, carry out a search with the following keywords:
 "OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
 "CL_WFD_TASK_PROXY=============CP" or "CL_WFD_TASK_PROXY=============CM001"
 "CONSTRUCTOR"
 If you cannot solve the problem yourself and want to send an error notification to SAP, include the following information:
 1. The description of the current problem (short dump)
 To save the description, choose "System->List->Save->Local File (Unconverted)".
 2. Corresponding system log
 Display the system log by calling transaction SM21. Restrict the time interval to 10 minutes before and five minutes after the short dump. Then choose "System->List->Save->Local File (Unconverted)".
 3. If the problem occurs in a problem of your own or a modified SAP program: The source code of the program In the editor, choose "Utilities->More Utilities->Upload/Download->Download".
 4. Details about the conditions under which the error occurred or which actions and input led to the error.
 The exception must either be prevented, caught within proedure
 "CONSTRUCTOR" "(METHOD)", or its possible occurrence must be declared in the
 RAISING clause of the procedure.
 To prevent the exception, note the following:
System environment
SAP-Release 701
Application server... "ydedb"
 Network address...... "9.57.177.109"
 Operating system..... "AIX"
 Release.............. "6.1"
 Hardware type........ "00C15EAF4C00"
 Character length.... 16 Bits
 Pointer length....... 64 Bits
 Work process number.. 4
 Shortdump setting.... "full"
Database server... "ydedb"
 Database type..... "DB6"
 Database name..... "YDE"
 Database user ID.. "SAPYDE"
Terminal.......... "IBM-BE014934612"
Char.set.... "C"
SAP kernel....... 701
 created (date)... "Mar 30 2009 21:48:51"
 create on........ "AIX 2 5 00CB5A5B4C00"
 Database version. "DB6_81 "
Patch level. 37
Patch text.. " "
Database............. "DB6 08.02.*, DB6 09.*"
 SAP database version. 701
 Operating system..... "AIX 1 5, AIX 2 5, AIX 3 5, AIX 1 6"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 73728
MM Used. 3730104
MM Free. 457144
User and Transaction
Client.............. 210
 User................ 013319744
 Language key........ "E"
 Transaction......... "PFTC "
 Transactions ID..... "4A62BD9572AD004BE10080000939B16D"
Program............. "CL_WFD_TASK_PROXY=============CP"
 Screen.............. "SAPLRHWS 1001"
 Screen line......... 19
Information on where terminated
 Termination occurred in the ABAP program "CL_WFD_TASK_PROXY=============CP" -
 in "CONSTRUCTOR".
The main program was "SAPLRHW4 ".
In the source code you have the termination point in line 91
 of the (Include) program "CL_WFD_TASK_PROXY=============CM001".
 The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
 procedure "CONSTRUCTOR" "(METHOD)", but it was neither handled locally nor
 declared
in the RAISING clause of its signature.
The procedure is in program "CL_WFD_TASK_PROXY=============CP "; its source
 code begins in line
1 of the (Include program "CL_WFD_TASK_PROXY=============CM001 ".
Source Code Extract
Line SourceCde
61 a_task = l_task.
 62 ENDIF.
63 *-- load task
64 IF in_task IS NOT INITIAL.
 65 a_task = in_task.
 66 ENDIF.
67 CALL METHOD deserialize
 68 EXPORTING
69 in_display = in_display
 70 EXCEPTIONS
71 task_not_exists = 1
 72 task_already_locked = 2
 73 OTHERS = 3.
 74 IF sy-subrc = 2.
 75 *---- we couldn't lock in update mode -> create a proxy in display
 76 *---- mode
77 CALL METHOD deserialize
 78 EXPORTING
79 in_display = 'X'
 80 EXCEPTIONS
 81 task_not_exists = 1
 82 task_already_locked = 2
 83 OTHERS = 3.
 84 ENDIF.
85 IF sy-subrc <> 0.
 86 RAISE task_not_found.
 87 ENDIF.
88 ENDIF.
89 * create before image on the container
 90 TRY.
>>>>> CALL METHOD a_container->create_before_image
 92 EXPORTING
93 include_extensions = 'X'.
 94 CATCH cx_swf_cnt_container .
 95 ENDTRY.
96
97 ENDMETHOD. "constructor
If any body is having any idea to resolve this issue then please let me know. We are into the last stage of the development.
Thanks in advance for replying this issue.
Best Regards,
Prashant Raichurkar

Hi Rick,
The small change I did into the business object and added those parameter into the task and workflow through binding. And you are right the changed I did was on 10/07 and I am getting dump from 13/07.
Also I already copied to copy the workflow template into another, in the new template everything is blank including workflow container and template. It is as like new template.
Also one thing I want to tell you that I thought to activate previous version so the moment I click on choose version again I got the same dump.
Please let me know if you have any idea to resolve this issue.
Thanks & Regards,
Prashant

Getting dump in Address iView in Personal Info-RFC_ERROR_SYSTEM_FAILURE

Hello All,
Currently i am getting error with Address iView in Personal Information, but other iViews in Personal info like Bank Info, Family Data, Personal Data iView are Displaying properly with out any Dump.
But while clicking on Addresses iView its giving error dump like this..
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException:      Subtype 5 does not exist for Infotype 0006                          , error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.per.fc.persinfo.FcPersInfo.initPernr(FcPersInfo.java:466)
     at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.initPernr(InternalFcPersInfo.java:888)
     at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.initPernr(FcPersInfoInterface.java:166)
     at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.initPernr(InternalFcPersInfoInterface.java:273)
     at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface$External.initPernr(InternalFcPersInfoInterface.java:509)
     at com.sap.xss.hr.per.in.address.overview.VcPerAddressINOverview.onInit(VcPerAddressINOverview.java:309)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverview.onInit(InternalVcPerAddressINOverview.java:263)
     at com.sap.xss.hr.per.in.address.overview.VcPerAddressINOverviewInterface.onInit(VcPerAddressINOverviewInterface.java:187)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverviewInterface.onInit(InternalVcPerAddressINOverviewInterface.java:152)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverviewInterface$External.onInit(InternalVcPerAddressINOverviewInterface.java:236)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:593)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:865)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException:      Subtype 5 does not exist for Infotype 0006                          , error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.per.model.mac.HRXSS_PER_MAC.hrxss_Per_Init_Pernr(HRXSS_PER_MAC.java:496)
     at com.sap.xss.per.model.mac.Hrxss_Per_Init_Pernr_Input.doExecute(Hrxss_Per_Init_Pernr_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 60 more
Anybody faced this issue, please share some input
Thanks In Advance
Adapag

Hi Sandeep,
Thanks for the reply, Yes I checked with my HR Consultant, and even i saw it in PA30 for Infotype006(Address) there is no Subtype 5 in the System. I asked him, he said we are not maintaining subtype 0005.
These are the presented Subtypes for IT006 in my ECC System
SubType -
Name
1                           Permenant Address
2                           Address for Correspondance
3                           Emergency Contact Address-1
4                           Emergency Contact Address-2
If i type 0005 in subtype filed its giving InValid Subtype.   Even Some Subtypes(1,2,3,4) are maintaing for IT006(Address) but why its giving error for Subtype 0005.
Can u give better input on this!!!
Thanks in Advance
Adapa

ZReport getting dump in Production but not in Quality and development

Hi,
There isa Zreport which displays daily stock in PP module.
It is getting dump in Production not in quality and development.
Since four days it is getting dump. Before that it is fine.
Please any one guide How to resolve.
Advance Thanks.

Runtime Error SAPSQL_IN_ITAB_ILLEGAL_OPTION
 Occurred on 29.08.2007 at 08:50:13
Invalid value in OPTION field of value table for IN itab operator.
What happened?
Error in ABAP application program.
The current ABAP program "ZPPRDR417" had to be terminated because o
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and admin
termination messages, especially those beyond their normal deletio
date.
Error analysis
The current ABAP/4 program attempted to execute an ABAP/4 Open SQL
statement in which the WHERE condition contains an IN itab operator
The IN itab operator is used with internal tables which
have the following structure:
 SIGN(1) OPTION(2) LOW LIKE db_field HIGH LIKE db_field
The OPTION column should contain only one of the following values:
 "EQ LE GE CP BT NE LT GT NP NB"
The value " " is not allowed here.
How to correct the error
Use only one of the permitted values in the OPTION column.
Information on where terminated
The termination occurred in the ABAP program "ZPPRDR417" in "WIP_STOCK_REP
The main program was "ZPPRDR417 ".
The termination occurred in line 330 of the source code of the (Include)
program "ZPPRDR417_FORM"
of the source code of program "ZPPRDR417_FORM" (when calling the editor 33
Source code extract
Caution: Program has changed
Caution: At time of termination, Active source code no longer available
003000 ? r_bwart-low = '106'.
003010 ? append r_bwart.
003020 ?
003030 ? r_bwart-low = '124'.
003040 ? append r_bwart.
003050 ?
003060 ? r_bwart-low = '125'.
003070 ? append r_bwart.
003080 ?
003090 ? select matnr
003100 ? werks
003110 ? into table i_marc
003120 ? from marc
003130 ? where ( matnr LIKE 'BILC%'
003140 ? OR matnr LIKE 'LGN%'
003150 ? OR matnr LIKE 'BRN%'
003160 ? OR matnr LIKE 'EBB%' )
003170 ? AND matnr NE 'BRN_DECLASSE'
003180 ? AND matnr NE 'BRN_SAF'
003190 ? and werks in r_werks.
003200 ?
003210 ? r_material-sign = 'I'.
003220 ? r_material-option = 'EQ'.
003230 ?
003240 ? loop at i_marc into wa_marc.
003250 ? r_material-low = wa_marc-matnr.
003260 ? append r_material.
003270 ? endloop.
003280 ? clear r_material.
003290 ?
 > ? if not i_matdoc is initial.
003310 ? select MBLNR
003320 ? MJAHR
003330 ? ZEILE
003340 ? BWART
003350 ? MATNR
003360 ? WERKS
003370 ? SHKZG
003380 ? MENGE
003390 ? UMWRK
003400 ? into table i_mseg_qty
003410 ? from mseg
003420 ? for all entries in i_matdoc
003430 ? where MBLNR eq i_matdoc-MBLNR
003440 ? and MJAHR eq i_matdoc-MJAHR
003450 ? and BWART in r_bwart
003460 ? and matnr in r_material
003470 ? and werks in r_werks.
003480 ?
003490 ? sort i_mseg_qty by matnr.

I am getting dump while downloading

i am getting dump while downloading file to presentaion server .
please suggest me .
code is like below.
PARAMETERS : p_dwn TYPE dxfile-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dwn.
 CALL FUNCTION 'F4_FILENAME'
EXPORTING
 PROGRAM_NAME =
 DYNPRO_NUMBER =
 FIELD_NAME =
 IMPORTING
 file_name = p_dwn.
 CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 filename = p_dwn
 filetype = 'ASC'
 write_field_separator = 'X'
 TABLES
 data_tab = t_zvtpmheader.
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.

Hi Veeru,
This dump you are getting because of type mismatch, just change the file path as follows :-
data declaration should be like this.
PARAMETERS : p_dwn TYPE STRING. <<<----
it will surely work.
cheers
Dhirendra

ALV tree: code is getting dumped............................

Hi all,
I want to display output using ALV tree. I havent worked on this before, So kindly provide me useful sample programs to display output using ALV tree.
Also i am creating field catalog using following code:
data : gt_fieldcatalog type lvc_t_fcat. "Fieldcatalog
get fieldcatalog
call function 'LVC_FIELDCATALOG_MERGE'
 EXPORTING
 i_structure_name = 'TP_OUTTAB'
 CHANGING
 ct_fieldcat = gt_fieldcatalog.
But its getting dumped and "NO_FIELDCATALOG_AVAILABLE" exception is raised.
Also strucure TP_OUTTAB is as:
TYPES: BEGIN OF tp_outtab,
 aufnr TYPE aufk-aufnr,
 txt TYPE t003p-txt,
 maktx TYPE makt-maktx,
 charg TYPE afpo-charg,
 icon TYPE char4,
 prueflos TYPE afko-prueflos, prueflos _ r TYPE icon-id,
 ext_roses(5),
 expt_roses TYPE icon-id,
 zurl(8), "
 zurl_r TYPE icon-id,
 crstat_t TYPE icon-id,
 crstat TYPE icon-id,
 adres TYPE cochp-adres,
 END OF tp_outtab.
Kindly tell me why the code is getting dumped. Seems there is some problem with structure.
Regards,
Sachin

Hi,
try the following example.
TYPE-POOLS: SLIS.
DATA: BEGIN OF I_VBAK OCCURS 0,
 VBELN LIKE VBAK-VBELN,
 ERNAM LIKE VBAK-ERNAM,
 ERDAT LIKE VBAK-ERDAT,
 AUDAT LIKE VBAK-AUDAT,
 VAR1,
 END OF I_VBAK.
DATA: BEGIN OF I_VBAP OCCURS 0,
 VBELN LIKE VBAP-VBELN,
 POSNR LIKE VBAP-POSNR,
 MATNR LIKE VBAP-MATNR,
 CHARG LIKE VBAP-CHARG,
 END OF I_VBAP.
DATA: FLDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
 LAYOUT TYPE SLIS_LAYOUT_ALV,
 KEY TYPE SLIS_KEYINFO_ALV.
DATA: IT_HEADER1 TYPE SLIS_T_LISTHEADER.
DATA: WA_HEADER1 TYPE SLIS_LISTHEADER.
DATA: IT_EVE1 TYPE SLIS_T_EVENT,
 WA_EVE1 TYPE SLIS_ALV_EVENT.
SELECT VBELN ERNAM ERDAT AUDAT FROM VBAK
INTO CORRESPONDING FIELDS OF TABLE I_VBAK
UP TO 20 ROWS.
SELECT VBELN POSNR MATNR CHARG FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE I_VBAP
UP TO 20 ROWS.
FLDCAT-FIELDNAME = 'VBELN'.
FLDCAT-TABNAME = 'I_VBAK'.
FLDCAT-REF_FIELDNAME = 'VBELN'.
FLDCAT-REF_TABNAME = 'VBAK'.
FLDCAT-SELTEXT_M = 'SALES DOC.'.
FLDCAT-COL_POS = 0.
FLDCAT-KEY = 'X'.
APPEND FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'ERNAM'.
FLDCAT-TABNAME = 'I_VBAK'.
FLDCAT-REF_FIELDNAME = 'ERNAM'.
FLDCAT-REF_TABNAME = 'VBAK'.
FLDCAT-SELTEXT_M = 'NAME OF PERSON'.
FLDCAT-COL_POS = 1.
APPEND FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'ERDAT'.
FLDCAT-TABNAME = 'I_VBAK'.
FLDCAT-REF_FIELDNAME = 'ERDAT'.
FLDCAT-REF_TABNAME = 'VBAK'.
FLDCAT-SELTEXT_M = 'RECORD DATE'.
FLDCAT-COL_POS = 2.
APPEND FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'AUDAT'.
FLDCAT-TABNAME = 'I_VBAK'.
FLDCAT-REF_FIELDNAME = 'AUDAT'.
FLDCAT-REF_TABNAME = 'VBAK'.
FLDCAT-SELTEXT_M = 'DOCUMENT DATE'.
FLDCAT-COL_POS = 3.
APPEND FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'POSNR'.
FLDCAT-TABNAME = 'I_VBAP'.
FLDCAT-REF_FIELDNAME = 'POSNR'.
FLDCAT-REF_TABNAME = 'VBAP'.
FLDCAT-SELTEXT_M = 'SALES DOC ITEM'.
FLDCAT-COL_POS = 4.
APPEND FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'MATNR'.
FLDCAT-TABNAME = 'I_VBAP'.
FLDCAT-REF_FIELDNAME = 'MATNR'.
FLDCAT-REF_TABNAME = 'VBAP'.
FLDCAT-SELTEXT_M = 'MATERIAL NO'.
FLDCAT-COL_POS = 5.
APPEND FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'CHARG'.
FLDCAT-TABNAME = 'I_VBAP'.
FLDCAT-REF_FIELDNAME = 'CHARG'.
FLDCAT-REF_TABNAME = 'VBAP'.
FLDCAT-SELTEXT_M = 'BATCH NUMBER'.
FLDCAT-COL_POS = 6.
APPEND FLDCAT.
CLEAR FLDCAT.
LAYOUT-EXPAND_FIELDNAME = 'VAR1'.
KEY-HEADER01 = 'VBELN'.
KEY-ITEM01 = 'VBELN'.
CLEAR WA_EVE1.
WA_EVE1-NAME = 'TOP_OF_PAGE'.
WA_EVE1-FORM = 'TOP-OF-PAGE1'.
APPEND WA_EVE1 TO IT_EVE1.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = SY-REPID
 IS_LAYOUT = LAYOUT
 IT_FIELDCAT = FLDCAT[]
 IT_EVENTS = IT_EVE1[]
 I_TABNAME_HEADER = 'I_VBAK'
 I_TABNAME_ITEM = 'I_VBAP'
 IS_KEYINFO = KEY
TABLES
 T_OUTTAB_HEADER = I_VBAK
 T_OUTTAB_ITEM = I_VBAP
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOP-OF-PAGE1. WA_HEADER1-TYP = 'H'.
WA_HEADER1-INFO = 'Hierarchical Display'.
APPEND WA_HEADER1 TO IT_HEADER1.
CLEAR WA_HEADER1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = IT_HEADER1[].
REFRESH IT_HEADER1.
ENDFORM. "TOP-OF-PAGE1
Reward points,if it is useful.
Thanks,
chandu.

J1IF13 Getting dump

Dear all MM experts,
I am getting dump in J1IF13 tcode .
some time it is running smoothly some time giving error what is the actual problem.
The ABAP dump analysis is like see at line 702 .
Short text
    Conversion error
What happened?
    The current screen processing action was terminated since a situ
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the c
    screen.
Error analysis
    The program has been interrupted and cannot resume.
    Program "SAPMJ1IFN" attempted to display fields on screen 1210.
    An error occurred during the conversion of this data.
692 &----
693 *&      Module STATUS_1210 OUTPUT
694 &----
695 *       text
696 ----
697 MODULE STATUS_1210 OUTPUT.
698   sort itab_excdtl.
699
700   DESCRIBE TABLE itab_excdtl LINES V_LINES_TC_1210.
701   tc_1210-lines = V_LINES_TC_1210.
702 ENDMODULE.    " here cursor is coming and getting dump while debugging.
Please help me to come out from this issue.
thanks ,
Sanket.

close

Getting DUMP Using 'REUSE_FIELD_CATALOG_MERGE'

Hi,
When im using the 'REUSE_FIELD_CATALOG_MERGE' FM im getting a dump like The internal table "\FUNCTION=K_KKB_FIELDCAT_MERGE\DATA=L_ABAP_SOURCE[]" is 72
characters wide. The program line is
79 characters wide.

Hi Kishore,
Do the following:
Go to Utilities -> Settings -> Select the tab ABAP EDITOR ->
Check the checkbox of Downward-Compat. Line length (72).
I hope this will remove that error.
Regards,
Nitin.

Getting dumped out of safari unexpectedly on my iPad2

I will be in Safari browsing and very unexpectedly the screen goes blank and I get dumped back to the iPad2 desktop. This has happened multiple times today. I have the latest OS version with the most current updates. This error has also occurred when I was in the map application. This is getting VERY annoying. Does anyone have any ideas as to what is causing this error. I've only had this iPad2 for a week so I hope that this isn't a hardware issue !

Well... I restarted the iPad... It worked for a little while then did the same thing while is was in the Map application.
If you goto General > About > diagnostics & usage I can find a an error labeled " low memory blah.blah.plist" which is listed below. Looks like the OS is having memory issues and just jettisons my session.... NOT COOL !!!
Incident Identifier: 3ADE83D1-2AD2-4D7A-9AD1-0355E24FA6D8
CrashReporter Key: 46b68728ade3c89c5d9d3cf243f888f0976143f9
Hardware Model: iPad2,1
OS Version: iPhone OS 5.0.1 (9A405)
Kernel Version: Darwin Kernel Version 11.0.0: Tue Nov 1 20:34:16 PDT 2011; root:xnu-1878.4.46~1/RELEASE_ARM_S5L8940X
Date: 2011-12-04 19:03:09 -0700
Time since snapshot: 332 ms
Free pages: 934
Wired pages: 16871
Purgeable pages: 2665
Largest process: Maps~ipad
Processes
Name UUID Count resident pages
geod 502
Maps~ipad 71887 (jettisoned) (active)
MobileMail <7064f2baf3f23db987bc8ec99855fe53> 3100 (jettisoned)
MobilePhone 817 (jettisoned)
networkd <6ee7a78e56073f6e8db4c2cc3265fdb4> 159
BTServer 204
aggregated <68a25a1690cb372096543a46abed14d7> 299
apsd 233
awdd <1cc9a098c3e63878bf779ccac7c08f0d> 206
fairplayd.K93 <84c26377e9ad3115aa3b24fc1b15eb7e> 103
fseventsd <78af02202422321885dfc85c24534b0e> 126
iapd <3ee7f82879033b4fb93b9cf1f4ecae29> 346
imagent <8e2042f2ec9e3af9ba400f031f1bbfa7> 351
locationd <91c84ab19dd03e4ab1b4cc30178ab1c0> 705
mDNSResponder 210
mediaremoted 199
mediaserverd <478e5e8345c83be5ba1868906813bb75> 546
ubd <7eaf0b0ca5b83afabecb0dfaa38c7a19> 339
wifid 272
powerd <25ddef6b52e4385b819e777dd2eeed3c> 162
lockdownd 208
CommCenterClassi <3ef6d0094b5c39d3b77e558ad3018d24> 291
syslogd 89
SpringBoard <7506c20d86da3f1dbe9bf38f8bda253d> 9712 (active)
configd <3430c0025ed13f56800a329b7254d2ae> 317
notifyd <3793fabace3a385687b3c29c1fa1fcac> 172
UserEventAgent <6e1cabc1ec6d372c90a6bdeaa7b258fa> 361
launchd 108
**End**

Hi, I recently upgraded my xcode to 5.1, my project is running well in ios 7.0,6.0, But in ios 7.1 i'm getting error like"iOS Simulator failed to install the application". Can anybody please suggest the solution for it.

My project is not running in ios 7.1 simulator i'm getting error like "iOS Simulator failed to install the application". Please suggest a solution for it.

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

I am getting error like "nca_connect_server: cannot communucate to host "

I am getting error like "nca_connect_server: cannot communucate to host " while replaying my script through Loadrunner 9.1
virtual User Script started
Starting action vuser_init.
vuser_init.c(12): nca_set_connect_opt("SCALE_INFO")
vuser_init.c(16): Error: nca_connect_server: cannot communicate with host
PLease give me some solutions.
you can post me in my email id: [email protected]

Hi,
Please see if (Note: 376631.1 - Forms Server Loadbalancing Using Metrics Server Client Not Working with Mercury Loadrunner) helps.
Regards,
Hussein

Getting dump while posting goods receipt through TCode migo

Hi,
I am getting dump after I click on post button in TCode 'MIGO'.
Short text
    The current application triggered a termination with a short dump.
Short text of error message:
Document number 9 5000000000 2010 was already assigned
Long text of error message:
Diagnosis
      Document number 5000000000 in company code 9 and fiscal year 2010
      has already been assigned.
System Response
      Termination of processing.
Procedure
      Check document number range 50 in company code 9 and fiscal year
      2010 and correct the number range status if necessary.
Technical information about the message:
Message class....... "F5"
Number.............. 152
Variable 1.......... 9
Variable 2.......... 5000000000
Variable 3.......... 2010
Variable 4.......... 50
So please help me what I can do?
Thanks,
Moderator Message: The short dump is self-explanatory.
Edited by: kishan P on Nov 18, 2010 11:17 AM

Hi,
plx try to chane the status in IE02
Go to edit ,manual options , in that delete the HU assignemtn
and then save it and come out of it ..
Hope that helps

Getting dump like LIST_TOO_MANY_LPROS

Similar Messages

Maybe you are looking for