Getting dump Uncaught_Exception while giving filter values

Hi Friends,
We have recently upgraded the system from BW 3.5 to BI 7.0, and SP17 we have applied.
Now the problem is we are not able give the filter values
while executing queries. It's giving the dump UNCAUGHT_EXCEPTION.
Error analysis:
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RS_PROGRAM_ERROR', was not caught
and therefore caused a runtime error.
The reason for the exception is:
Error in BW: Error creating tmp table
How to correct the error:
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_PROGRAM_ERROR"
"CL_RSBOLAP_BICS_SERVICES======CP" or "CL_RSBOLAP_BICS_SERVICES======CM003"
"HANDLE_UNCAUGHT_EXCEPTION"
Awaiting for your suggestions.
Regards
Udaya

Hello everybody,
we fixed our problem.
It was a customizing issue.
Switch on history in SPRO by "Activating personalization in BeX"
regards
Joerg

Similar Messages

  • Dump created while giving numbering series

    Dear All,
    sytem throws an error message "dump created" while trying to give numbering series in a particular form. Am not able to read full error description, since its come out from sapb1 application within a few seconds
    Please help me on the above
    Waiting for your valuable response
    thanks & regards
    venkatesh n

    Hi Thangaraj,
    thanks for your reply. I have tried to define numbering series, but the same problem persists again
    pls do the needful
    thanks & regards
    Venkatesh N

  • I am getting dump error while running one report in one select query

    Hi,
    While running a report program, I am getting a dump error in one select query. So could you please correct the select query so that I can't face the dump error.
    SELECT vbeln parvw kunnr INTO CORRESPONDING FIELDS OF TABLE l_t_vbpa
      FROM vbpa
      FOR ALL ENTRIES IN l_t_backorder_item
      WHERE vbeln = l_t_backorder_item-vbeln AND
      ( ( parvw = c_we AND kunnr IN rng_shipto ) OR  ( parvw = c_ag AND
      kunnr IN rng_soldto ) ) .
    <removed by moderator>
    Best Regards,
    BDP
    Edited by: Thomas Zloch on Apr 30, 2010 12:31 PM

    Hi Bansidhar,
    It would be helpful if you could tell what type of dump it is.
    If it is a timeout you should check whether l_t_backorder_item is empty - in this case ALL document numbers are selected. f you get the timeout with a populated table consider converting the l_t_backorder_item table into one ore more ranges tables - the select with ranges tables is way quicker than 'for all entries'. But take care the ranges table has not to many entries - the SAP SQL converter puts this into one huge SQL statement and this might become too big to be handled by the database (depends on the actual underlying database).
    I would also consider splitting the SELECT into two (2nd one with 'appending into table') to make the code easier to understand It also helps the database system determining a strategy for the select.
    Regards,
    Gerd Rother

  • Getting ora-00990 while giving Grant create directory privilege

    Hi,
    I need to create a directory (ext_dir_src) in the user 'new_user'.So i have given,
    create or replace directory ext_dir_src as '/mark_data/erp/src;
    but i was getting an error as:
    ORA-01031 insufficient privileges
    so i logged in as 'SYSTEM' user and given:
    grant create directory to new_user;
    but i am getting the following error:
    ORA-00990 missing or invalid privileges
    Can this privilege be given to 'new_user' from SYSTEM user?
    Or my Grant command is wrong?

    It would appear that the operating system "oracle" doe not have appropriate privileges on the directory.
    It is oracle:dba that must own '/mark_data' not Mark.

  • Getting Dump error while changeing ODS.

    Hi BW Experts,
    I am using Custom ODs.And i am trying to change. It throws me a DUMP.When i am trying to delete the ODS, it is not deleting. I have already deleted the data from Active data and Change log table.
    Can you pls help on this issue.
    Thanks,
    Ram.

    Hi
    Attached the short dump :
    An SQL error occurred when accessing a table "/BIC/B0000908000 "
    Database error text........: "ORA-01502: index 'SAPGTA./BIC/B0000908000~0' or
      partition of such index is in unusable state"
    Internal call code.........: "[RSQL/COUN//BIC/B0000908000 ]"
    Please check the entries in the system log (Transaction SM21).
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
    "SAPLRSDU_UTIL" or "LRSDU_UTILU09"
    "RSDU_DATA_EXISTS_TABLE"
    Regards
    RaM

  • How to know if implementation with a filter value exist for a BAdI in code?

    Hi all,
    Scenario:
    I created a BAdI. There will be a button on the UI to call its implementation(s); while if there is no implementation with specified filter value, this button needs to be hidden. Thus I need to know if the implementation exist before calling it.
    Question:
    In the ABAP code, how to get whether implementation with specified filter value exists for a BAdI?
    If it's possible, please help provide code.
    Thanks and regards,
    Said

    Problem solved:
    data: r_badi type ref to YOUR_BADI,
              badi_impl_num type i.
      get badi r_badi
        filters
          flt_name = fit_val.
      badi_impl_num = cl_badi_query=>number_of_implementations( badi = r_badi ).
      if badi_impl_num > 0.
        "there are badi implementation(s)
      endif.

  • PerformancePoint in SharePoint 2010 - Unable to get filter values from... Error 10828

    I currently am using PPT to expose data from a Microsoft Analysis Server cube. The cube is wide open and requires no permissions to access.
    The behavior of my filters is odd as sometimes they work perfectly fine, and other times I receive the following error upon report run:
    Unable to get filter values.
    An unexpected error occurred. Error 10828. Additional details have been logged for your administrator.
    I have looked at the ULS logs and found the following:
    An unexpected error occurred.  Error 10828.  Exception details: System.NullReferenceException: Object reference not set to an instance of an object.    
     at Microsoft.PerformancePoint.Scorecards.Server.PmServer.QueryTimeIntelligenceInternal(DataSource dataSource, DateTime currentTime, String formula)    
     at Microsoft.PerformancePoint.Scorecards.Server.PmServer.QueryTimeIntelligence(RepositoryLocation dataSourceLocation, DateTime currentTime, String formula)
    An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem:  Microsoft.PerformancePoint.Scorecards.BpmException: Unable to get filter values.  PerformancePoint Services
    error code 20700.
    This is odd to me, as I can trick the report to run by changing the date filters to another day, then back to the original days that error'ed out and everything is fine. Some guidance would be appreciated.

    Hi,
    Do you mean that you have Office 2007 and Office 2010 both installed in you computer?
    Based on my test, I copy a Access 2010 database into a computer only installed Offic 2007, then using Excel 2007 to import Access database data, no error occurred.
    So double click the Access database to see whether the databased is opened with Access 2007 or Access 2010. If it is opened with Access 2010, then try to save it as Access 2007 to
    check the issue.
    Jaynet Zhang
    TechNet Community Support

  • Error message while selecting a filter value

    Hi Guys,
    I am running a sales report n its executing fine...I mean...the report is getting displayed properly..but when i am trying to select a filter value...for example...trying to select a sold to party....when i selct that particular sold to party and execute the query...its coming up with an error...pls check..
    Error msg:
    The following error text was processed in the system BWP : SQL error 3114 occurred when accessing program CX_SY_OPEN_SQL_DB=============CP part LOAD.
    The error occurred on the application server soabwp1_BWP_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Form: FETCH_DATA_OPENSQL of program SAPLRSDRS
    Function: RSDRS_CURSOR_FETCH of program SAPLRSDRS
    Function: RSDRS_READ_DATA of program SAPLRSDRS
    Function: RSDRC_BASIC_DB_QUERY_DATA_GET of program SAPLRSDRC
    Form: BASIC_QUERY_DATA_GET_ROLAP of program SAPLRSDRC
    Function: RSDRC_BASIC_QUERY_DATA_GET of program SAPLRSDRC
    Function: RSDRC_BASIC_CUBE_DATA_GET of program SAPLRSDRC
    Form: DATA_GET of program SAPLRSDRC
    Function: RSDRC_CUBE_DATA_GET of program SAPLRSDRC
    Function: RSDRC_CUBE_DATA_GET_OLAP of program SAPLRSDRC
    Its pretty urgent...I will award the highest points if this gets solved...
    Thanks,
    SAPconsultant.

    Hi
    It depends on the ssytem settings. The problem with your query is that it is not able to fetch all the data due to lack of memory. However, when you are giving smaller range, you are getting the output. You can either ask the basis guy to increase the memory space or try running the query by giving smaller date range.
    Hope it helps.
    Lasya.

  • I am getting dump while downloading

    i am getting dump while downloading file  to presentaion server .
    please suggest me .
    code is like below.
    PARAMETERS : p_dwn   TYPE dxfile-filename.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dwn.
        CALL FUNCTION 'F4_FILENAME'
      EXPORTING
        PROGRAM_NAME        =
        DYNPRO_NUMBER      =
        FIELD_NAME                =
           IMPORTING
             file_name           = p_dwn.
        CALL FUNCTION 'GUI_DOWNLOAD'
             EXPORTING
                  filename              = p_dwn
                  filetype              = 'ASC'
                  write_field_separator = 'X'
             TABLES
                  data_tab              = t_zvtpmheader.
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.

    Hi Veeru,
    This dump you are getting because of type mismatch, just change the file path as follows :-
    data declaration should be like this.
    PARAMETERS : p_dwn TYPE STRING. <<<----
    it will surely work.
    cheers
    Dhirendra

  • Getting the following error while parsing the values usng xml parser

    Hi
    I am getting the following error while parsing the values using the code in r12 instance on linux
    declare
    XML_PARSER XMLPARSER.PARSER;
    DOC XMLDOM.DOMDOCUMENT;
    DOCELEMENT DBMS_XMLDOM.DOMELEMENT;
    BEGIN
    -- NEW PARSER
    XML_PARSER := XMLPARSER.NEWPARSER;
    -- SET SOME CHARACTERISTICS
    XMLPARSER.SETVALIDATIONMODE(XML_PARSER, FALSE);
         IF P_DIR IS NOT NULL AND P_FILENAME IS NOT NULL
         THEN
         FND_FILE.PUT_LINE(FND_FILE.LOG,'DIRECTORY FOUND'||'-'||P_DIR);
         XMLPARSER.SETBASEDIR(XML_PARSER, P_DIR);     
         -- PARSE INPUT FILE
         FND_FILE.PUT_LINE(FND_FILE.LOG,'FILE FOUND'||'-'||P_FILENAME);
         XMLPARSER.PARSE(XML_PARSER, P_DIR || '/' || P_FILENAME);     
         -- GET DOCUMENT
         DOC := XMLPARSER.GETDOCUMENT(XML_PARSER);
         LOAD_SUPP(doc);
         ELSE
         DBMS_OUTPUT.PUT_LINE('DIRACTORY/FILENAME CANNOT BE NULL');
         END IF;
    EXCEPTION
    WHEN OTHERS THEN
    DBMS_OUTPUT.PUT_LINE('DATA NOTINSERTED'||sqlerrm);
         ROLLBACK;
    END
    I am getting the following error
    DIRACTORYL-/home/appldevORA-0000: normal, successful completion
    FILE NAME-suppliersample_data.xmlORA-0000: normal, successful completion
    DATA NOTINSERTEDORA-31001: Invalid resource handle or path name "/home/appldev/suppliersample_data.xml"
    ORA-06512: at "SYS.XDBURITYPE", line 11
    ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 142
    ORA-29280: invalid directory path
    ORA-29280: invalid directory path
    ORA-29280: invalid directory path
    It could be great if some one could give a suggestion/solution.
    Thanks
    Ajesh

    Besides this is not the correct forum try to google the error message first before posting:
    http://ora-29280.ora-code.com/
    cheers

  • User cannot change password option is automatically getting unchecked while giving domain admin rights

    user cannot change password option is automatically getting unchecked while giving domain admin rights

    Greetings!
    "Domain Admins" falls into the category of protected groups and it is included in ADminSDHolder process. It is normal and was designed in order to prevent the modification to these privileged groups. More information on the link below:
    AdminSDHolder, Protected Groups and SDPROP
    Regards.
    Mahdi Tehrani   |  
      |  
    www.mahditehrani.ir
    Please click on Propose As Answer or to mark this post as
    and helpful for other people.
    This posting is provided AS-IS with no warranties, and confers no rights.
    How to query members of 'Local Administrators' group in all computers?

  • Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

    Dear S&OP community,
    I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
    This what I did...
    1) Created new attributes and master data objects and activated them successfully.
    2) Time profile created and activated successfully
    3) Trying to create planing area by assigning  time profile in step 2 and assigned master data from step1..Unable to save the data and system returns 
    this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
    My understanding is time profile needs to be active  but doesn't have to have values...
    Any help is appreciated.
    Thanks,
    Krishna

    YS,
    Here are my time profile settings
    Level       Name          Display Horizon - Past  Display Horizon - Future
    1             Monthly     -6                                       11         
    2             Quarterly     -2                                       3
    3             Yearly        -1                                       2
    Time profile is active and but time profile data is not loaded
    Thanks,
    Krishna

  • Getting dump error in Sales order creation mode while going to item texts

    Hi,
    I'm getting an ABAP dump error while going to item text tab in the creation mode of a sales order. This issue is happening only when we make a manual entry in the item text field for a particular text type Y011 in the preceding document of the sales order. Otherwise everything is working fine.
    When I checked the settings in SPRO under SD - Text Control - Sales Doc - Item, the definition and assignment for the TEXT type Y011 is maintained correctly. Not sure why the issue is happening only with this text type.
    Please assist. Thank you
    Taiseer

    Thank you for the reply.
    We had tried this already. However, since the error is with standard program with many function modules. They are finding it difficult.
    There is strange side also for this error that I missed to update. When I replace the Text Id Y011 with a new one it is taking me to the line item text tab with out any error even though I'm using the same access sequence and other settings. However, after saving the order and displaying the order number, immediately it is going to dump again.

  • Error message while trying to select one particular filter value

    Hi Guys,
                 I am running a sales report n its executing fine...I mean...the report is getting displayed properly..but when i am trying to select a filter value...for example...trying to select a sold to party....when i selct that particular sold to party and execute the query...its coming up with an error...pls check..
    Error msg:
    The following error text was processed in the system BWP : SQL error 3114 occurred when accessing program CX_SY_OPEN_SQL_DB=============CP part LOAD.
    The error occurred on the application server soabwp1_BWP_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Form: FETCH_DATA_OPENSQL of program SAPLRSDRS
    Function: RSDRS_CURSOR_FETCH of program SAPLRSDRS
    Function: RSDRS_READ_DATA of program SAPLRSDRS
    Function: RSDRC_BASIC_DB_QUERY_DATA_GET of program SAPLRSDRC
    Form: BASIC_QUERY_DATA_GET_ROLAP of program SAPLRSDRC
    Function: RSDRC_BASIC_QUERY_DATA_GET of program SAPLRSDRC
    Function: RSDRC_BASIC_CUBE_DATA_GET of program SAPLRSDRC
    Form: DATA_GET of program SAPLRSDRC
    Function: RSDRC_CUBE_DATA_GET of program SAPLRSDRC
    Function: RSDRC_CUBE_DATA_GET_OLAP of program SAPLRSDRC
    Its pretty urgent...I will award the highest points if this gets solved...
    Thanks,
    SAPconsultant.

    Hello,
    See these Notes
    SAP Note 743263 RABAX_STATE in form: GET_VALUES_BW_USER_PORTAL
    SAP Note 773670 Termination in 0ANLYZER when you switch tabstrip
    SAP Note 643933 RABAX_STATE: Conversion overflow
    Thanks
    Chandran

  • Get the filter value in the Modify Table interface

    Dear Colleages,
    I use a Table Interface in order to get aditional values in a web template from a table, but I need the filter value used in the query.
    I can get it with "get parameter" sentence:
    GET PARAMETER ID '/BI0/OCALMONTH' FIELD MES1
    But I cannot when I have a filter instead of a variable, it doesn't work using a variable without "manual entry" option.
    ¿How can I get this filter value?
    Regards,
    Jose

    Hi Jose,
    Use method get_state_infos (http://help.sap.com/saphelp_nw04/helpdata/en/32/ab3a3c24b4a00ae10000000a11402f/frameset.htm)
    The dynamic filters are in e_t_slicer.
    If this a a static filter or a variable, you can find them in e_t_txt_symbols.
    Heike

Maybe you are looking for