Getting Error Cannot coerce between type 50 and type 32

declare
  soap_request varchar2(30000);
  resp XMLType;
  v_num varchar2(30);
  begin
  soap_request := '
  <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <SOAP-ENV:Body>
      <rpc:ZEB_spcCalculate_spcPriceResponse xmlns:rpc="http://siebel.com/asi/">
         <Currency>EUR</Currency>
         <Total_spcPrice>2700</Total_spcPrice>
      </rpc:ZEB_spcCalculate_spcPriceResponse>
   </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
    resp:= XMLType(soap_request);
    select resp.extract('/SOAP-ENV:Envelope/SOAP-ENV:Body/rpc:ZEB_spcCalculate_spcPriceResponse/Currency/text()','xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:rpc="http://siebel.com/asi/"') into v_num from dual;
    dbms_output.put_line(v_num);
    end;If I run the code it will give the error.
But I Change the select statement to below it runs fine.
select to_number(resp.extract('/SOAP-ENV:Envelope/SOAP-ENV:Body/rpc:ZEB_spcCalculate_spcPriceResponse/Total_spcPrice/text()','xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:rpc="http://siebel.com/asi/"')) into v_num from dual;What is wrong..
Can someone pls tell.
Thanks

Here's the working version of your example
declare
  soap_request varchar2(30000);
  resp XMLType;
  v_num varchar2(30);
  begin
  soap_request := '
  <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <SOAP-ENV:Body>
      <rpc:ZEB_spcCalculate_spcPriceResponse xmlns:rpc="http://siebel.com/asi/">
         <Currency>EUR</Currency>
         <Total_spcPrice>2700</Total_spcPrice>
      </rpc:ZEB_spcCalculate_spcPriceResponse>
   </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
    resp:= XMLType(soap_request);
    select resp.extract('/SOAP-ENV:Envelope/SOAP-ENV:Body/rpc:ZEB_spcCalculate_spcPriceResponse/Total_spcPrice/text()','xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:rpc="http://siebel.com/asi/"').getNumberVal()
      into v_num
      from dual;
    dbms_output.put_line(v_num);
    end;Changes
1) You only need to include namespaces that are referenced in the associated XPath so I removed two of them from your sample
2) Your first sample used Currency which is a text value of "EUR", hence the error.
3) I added .getNumberVal() to translate the Total_spcPrice into a Number.
4) Look at my method 3 example in {message:id=2826611} for a way to parse this as an XMLType within the PL/SQL code. I also have an example at {message:id=3610259}

Similar Messages

  • When trying to install 9.0.1 on Win 7 get error "Cannot create temp folder archive" and installation stops.)

    Uninstalled an earlier version (8.x.x.) because it would not start up. Tried to install version 9.0.1 and got the above error message. It appeared in a window entitled 7-Zip.

    Interesting. I tried one more time - instead of saving it to my hard drive, I ran it directly off the Mozilla site and it installed....
    Something is definitely wrong with the Mozilla "save as" and THEN run process....
    see my original rant reply to another unsasatified user if you're interested:
    https://support.mozilla.com/en-US/questions/772290

  • PLS-00497: cannot mix between single row and multi-row (BULK) in INTO list

    Hi,
    I have a requirement to send a table data through mail,
    so am using execute statement after opening the connection and am using the following PLSQL code, which am failing to execute successfully.
    My code goes like this.
        0            10            20           30           40            50
    1  CREATE OR REPLACE PROCEDURE SEND_TABLE_DATA( FROMAD IN VARCHAR2,
    2   TOAD IN VARCHAR2,
    3   SUBJECT IN VARCHAR2,
    4   MESSAGE IN VARCHAR2,
    5   DOCID IN VARCHAR2,
    6   DOCDT IN DATE,
    7   PRODOAID IN NUMBER )
    8   AS
    9   BATCHNO  VARCHAR2(32767);
    10  PCSBOX  NUMBER;
    11  AMOUNT  NUMBER;
    12  SMTPHOST VARCHAR2(255) := 'XXX.XXX.X.XXX' ;
    13  A UTL_SMTP.CONNECTION ;
    14  BEGIN
    15  A :=UTL_SMTP.OPEN_CONNECTION(SMTPHOST,25);
    16  UTL_SMTP.HELO(A,SMTPHOST);
    17  UTL_SMTP.MAIL(A,FROMAD);
    18  UTL_SMTP.RCPT(A,TOAD);
    19  UTL_SMTP.OPEN_DATA(A);
    20  UTL_SMTP.WRITE_DATA(A, CHR(13) ||CHR(13) || CHR(13) );
    21  UTL_SMTP.WRITE_DATA (A,'Date: '|| TO_CHAR(SYSDATE,'DD/MM/YYYY HH24:MI:SS') || CHR(13) );
    22  UTL_SMTP.WRITE_DATA(A,'From: '||FROMAD|| CHR(13) );
    23  UTL_SMTP.WRITE_DATA(A, 'To: '||TOAD|| CHR(13) );
    24  UTL_SMTP.WRITE_DATA(A, 'Subject: '|| SUBJECT || CHR(13) );
    25  UTL_SMTP.WRITE_DATA(A,MESSAGE||DOCID||' Documented on '||DOCDT||CHR(13) );
    26  UTL_SMTP.WRITE_DATA(A,CHR(13) || CHR(13) || CHR(13) );
    27  UTL_SMTP.WRITE_DATA(A,'This is for your information'||CHR(13) );
    28  UTL_SMTP.WRITE_DATA (A,' BATCHNO '|| ' -- '||' PCSBOX '||' -- '||' AMOUNT '||CHR(13) );
    29  EXECUTE IMMEDIATE
    30         'SELECT
    31       A.BATCHNO,B.PCSBOX,B.AMOUNT
    32        FROM
    33      SCHEMA1.TABLEX A,SCHEMA2.TABLEY B
    34        WHERE
    35       A.BATCHID=B.BATCHNO AND B.PRODOAID='|| PRODOAID
    36     BULK COLLECT INTO BATCHNO,PCSBOX,AMOUNT;
    37  FOR indx IN 1..BATCHNO.COUNT
    38   LOOP
    39    UTL_SMTP.WRITE_DATA (A,BATCHNO(indx)|| ' -- '||PCSBOX(indx)||' -- '||AMOUNT(indx)||CHR(13) );
    40   END LOOP;
    41  UTL_SMTP.WRITE_DATA( A,CHR(13) || CHR(13) || CHR(13) );
    42  UTL_SMTP.CLOSE_DATA(A);
    43  UTL_SMTP.QUIT(A);
    44  EXCEPTION
    45  WHEN OTHERS THEN
    46  UTL_SMTP.QUIT(A);
    47  RAISE;
    48  END;
    49  /
    SELECT * FROM USER_ERRORS
    NAME                       TYPE             SEQUENCE    LINE         POSITION        TEXT                                                                                                             ATTRIBUTE                 MESSAGE_NUMBER
    SEND_TABLE_DATA
    PROCEDURE
    3
    37
    1
    PL/SQL: Statement ignored
    ERROR
    0
    SEND_TABLE_DATA
    PROCEDURE
    2
    37
    24
    PLS-00487: Invalid reference to variable 'BATCHNO'
    ERROR
    487
    SEND_TABLE_DATA
    PROCEDURE
    1
    36
    25
    PLS-00497: cannot mix between single row and multi-row (BULK) in INTO list
    ERROR
    497
    Thanks In Advance
    Regards
    Pradeep.

    > 29  EXECUTE IMMEDIATE
    > 30         'SELECT
    > 31       A.BATCHNO,B.PCSBOX,B.AMOUNT
    > 32        FROM
    > 33      SCHEMA1.TABLEX A,SCHEMA2.TABLEY B
    > 34        WHERE
    > 35       A.BATCHID=B.BATCHNO AND B.PRODOAID='|| PRODOAID
    > 36     BULK COLLECT INTO BATCHNO,PCSBOX,AMOUNT;
    The variables BATCHNO, PCSBOX and AMOUNT are defined as scalar variables. Check there definition
    > 9   BATCHNO  VARCHAR2(32767);
    > 10  PCSBOX  NUMBER;
    > 11  AMOUNT  NUMBER;
    You cannot use BULK COLLECT on scalar variables. The variables must be defined as a COLLECTION TYPE in order to perform bulk collect.

  • When i login to icloud form windows 7 Home premium PC, I get error - Cannot sign in due to server error

    When i login to icloud form windows 7 Home premium PC, I get error - Cannot sign in due to server error

    You may have to follow the slightly more detailed steps in whichever of these two applies to you.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Rebooting into safe mode may be needed to delete any folder the instructions say you should remove. You may also find this Microsoft Fixit helps to remove stubborn components. It has taken some people several attempts to completely clean iTunes and supporting software before they have been able to successfully reinstall it.
    tt2
    Message was edited by: turingtest2

  • Getting error "cannot open" when playing Videos purchased on itunes.

    I'm trying to stream videos from my PC to my iPad 2 using the "Videos" app and i keep getting error "cannot open" on any video that I try to play that I purchased through iTunes. Other videos I added that werent purshased through itunes play fine however. Can anyone help with a solution? My iPad is on 5.0.1 if that helps.

    I'm getting this error suddenly. I used to be able to stream purchased movies just fine, and now it simply says, "Cannot open." With movies I ripped from my DVDs, they will play just fine, but movies purchased from iTunes give the error every time.
    I know I don't have any odd characters in my name like mikesoderstrom had and I haven't changed any account details since the last time it was working a few weeks ago. The only major change I can think of is upgrading to iTunes 11.
    My iTunes account says that both my Mac and my Phone are still authorized. Maybe I should try deauthorizing all anyway, but I'd rather not deal with the hassle of re-authorizing, especially if it didn't work for someone who tried it already.
    I have no problems with downloading/updating apps, just with Home Sharing purchased movies.

  • Getting error "cannot connect to the App Store"

    getting error "cannot connect to the App Store"

    YAY!!! Saved it in my Mac's Firefox Bookmarks for easy future access!
    Hope you are having a lovely afternoon today! I'm about ready to go bobo....I have an early meeting, and I don't want to oversleep! The nice part is that I work remotely, so I only have to wake up 15 minutes or so before the meeting.... I don't even use an alarm clock anymore (really, my iPhone alarm, which is much more pleasant), unless I have to get up at 6:30 or something....
    TMI?
    GB

  • Getting error "Cannot initialize Report Engine server. (RWI 00226)"

    Hello All,
    We have BO XI 3.1 running on AiX 5.3 and db2 9.5 with fixpack 6.
    I am getting error "Cannot initialize Report Engine server. (RWI 00226)" Whenever i am trying to create a document or report.
    We were not getting this error earlier. getting it since few days.
    currently our web intelligence processing server is not running and showing the status as "initializing and disabled".
    every time when i tried to restart web intelligence processing server,it is going to initializing status only.
    I tried to enable the trace for this server but it is not allowing me to do and throughing the error " Configuration, auditing or enable/disable state change rejected; server SIA.WebIntelligenceProcessingServer is currently being initialized."
    I also tried creating a new instance of web intelligence processing server, even it has also gone to "initializing" status all the time.
    Environment Information:
    BOXI 3.1 SP2
    OS: AIX 5.3
    DB: DB2 9.5 Fix pack 6
    Plese help in resolving this issue.
    Thanks & Best Wishes,
    Sachin.

    Hi,
    Thanks for your prompt response.
    I already tried the solution provided by you. I stopped BO server completely and restarted it again but it does not worked for me.
    I have stopped the old Web intelligence processing server and created a new instance and started, but the new one has not started but going to initializing status.
    It even not allowing me to delete the newly created instance, saying that it is still in initializing status.
    Please suggest me if anything else i need to check.
    Thanks in advance.
    Best Regards,
    Sachin

  • Getting error wrong number or type of parameters for EAM_PROCESS_WO_PUB

    Hi All,
    I am Getting error wrong number or type of parameters for EAM_WO_PROCESS_PUB.PROCESS_WO API, pls any body can help me,pls send code for
    EAM_WO_PROCESS_PUB.PROCESS_WO API.
    Thanks&Reagrds,
    Hanimi Reddy.

    Hi srini,
    I developed code for work order api EAM_PROCESS_WO_PUB.PROCESS_MASTER_CHILD_WO following and i am getting error wrong number or types of arguments in call to 'PROCESS_MASTER_CHILD_WO, pls see the code and help me
    CREATE OR REPLACE PROCEDURE SANG_WR_TO_WO_API/*(ERRBUF OUT VARCHAR2, RETCODE OUT VARCHAR2)*/ IS
    v_created_by number;
    v_updated_by number;
    v_updated_name varchar2(30);
    V_ENTITY_ID VARCHAR2(30);
    l_EAM_WO_RELATIONS_TBL EAM_PROCESS_WO_PUB.EAM_WO_RELATIONS_TBL_type ;
    --:= EAM_PROCESS_WO_PUB.g_miss_EAM_WO_RELATIONS_rec;
    l_eam_wo_tbl EAM_PROCESS_WO_PUB.eam_wo_rec_type; --:= EAM_PROCESS_WO_PUB.G_MISS_EAM_WO_rec;
    l_eam_op_tbl EAM_PROCESS_WO_PUB.eam_op_tbl_type ;--:= EAM_PROCESS_WO_PUB.G_MISS_eam_op_tbl;
    l_eam_op_network_tbl EAM_PROCESS_WO_PUB.eam_op_network_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_op_network_tbl;
    l_eam_res_tbl EAM_PROCESS_WO_PUB.eam_res_tbl_type;--:= EAM_PROCESS_WO_PUB.G_MISS_eam_res_tbl;
    l_eam_res_inst_tbl EAM_PROCESS_WO_PUB.eam_res_inst_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_res_inst_tbl;
    l_eam_sub_res_tbl EAM_PROCESS_WO_PUB.eam_sub_res_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_sub_res_tbl ;
    -- l_eam_res_usage_tbl EAM_PROCESS_WO_PUB.eam_res_usage_tbl_type := EAM_PROCESS_WO_PUB.G_MISS_eam_res_usage_tbl;
    l_eam_mat_req_tbl EAM_PROCESS_WO_PUB.eam_mat_req_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_mat_req_tbl ;
    l_eam_direct_items_tbl EAM_PROCESS_WO_PUB.eam_direct_items_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_direct_items_tbl ;
    l_x_eam_wo_tbl EAM_PROCESS_WO_PUB.eam_wo_rec_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_wo_rec;
    l__x_EAM_WO_RELATIONS_TBL EAM_PROCESS_WO_PUB.EAM_WO_RELATIONS_TBL_type ;--:= EAM_PROCESS_WO_PUB.g_miss_EAM_WO_RELATIONS_TBL;
    l_x_eam_op_tbl EAM_PROCESS_WO_PUB.eam_op_rec_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_op_rec ;
    l_x_eam_op_network_tbl EAM_PROCESS_WO_PUB.eam_op_network_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_op_network_tbl;
    l_x_eam_res_tbl EAM_PROCESS_WO_PUB.eam_res_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_res_tbl;
    l_x_eam_res_inst_tbl EAM_PROCESS_WO_PUB.eam_res_inst_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_res_inst_tbl ;
    l_x_eam_sub_res_tbl EAM_PROCESS_WO_PUB.eam_sub_res_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_sub_res_tbl;
    -- l_x_eam_res_usage_tbl EAM_PROCESS_WO_PUB.eam_res_usage_tbl_type := EAM_PROCESS_WO_PUB.G_MISS_eam_res_usage_tbl ;
    l_x_eam_mat_req_tbl EAM_PROCESS_WO_PUB.eam_mat_req_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_mat_req_tbl;
    l_x_eam_direct_items_tbl EAM_PROCESS_WO_PUB.eam_direct_items_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_direct_items_tbl ;
    l_x_return_status VARCHAR2(30);
    l_x_msg_count NUMBER;
    l_x_debug VARCHAR2(30);
    l_output_dir VARCHAR2(30);
    l_debug_filename VARCHAR2(30) ;
    l_debug_file_mode VARCHAR2(30) ;
    CURSOR CUR_WTW IS
    SELECT
    EWR.WIP_ENTITY_ID
    ,EWR.WIP_ENTITY_NAME
    ,EWR.ORGANIZATION_ID
    ,WAC.ORGANIZATION_CODE
    ,EWR.DESCRIPTION
    ,EWR.ASSET_GROUP_ID
    ,EWR.ASSET_NUMBER
    ,EWR.ASSET_NUMBER_DESCRIPTION
    ,WAC.ACCOUNTING_CLASS
    ,WAC.MATERIAL_ACCOUNT
    ,WAC.MATERIAL_OVERHEAD_ACCOUNT
    ,WAC.RESOURCE_ACCOUNT
    ,WAC.OUTSIDE_PROCESSING_ACCOUNT
    ,WAC.MATERIAL_VARIANCE_ACCOUNT
    ,WAC.RESOURCE_VARIANCE_ACCOUNT
    ,WAC.OUTSIDE_PROC_VARIANCE_ACCOUNT
    ,WAC.STD_COST_ADJUSTMENT_ACCOUNT
    ,WAC.OVERHEAD_ACCOUNT
    ,WAC.OVERHEAD_VARIANCE_ACCOUNT
    ,EWR.WORK_REQUEST_OWNING_DEPT_ID
    ,EWR.WORK_REQUEST_OWNING_DEPT
    ,EWR.WORK_REQUEST_PRIORITY_ID
    ,EWR.WORK_REQUEST_PRIORITY
    ,EWR.WORK_REQUEST_STATUS_ID
    ,WAC.ORGANIZATION_NAME
    FROM
    WIP_EAM_WORK_REQUESTS_V EWR
    ,WIPFV_ACCOUNTING_CLASSES WAC
    ,WIP_EAM_PARAMETERS WAP
    WHERE
    EWR.ORGANIZATION_ID = WAC.ORGANIZATION_ID
    AND WAC.ORGANIZATION_ID = WAP.ORGANIZATION_ID
    AND WAC.ACCOUNTING_CLASS = WAP.DEFAULT_EAM_CLASS
    AND EWR.WORK_REQUEST_STATUS = 'Awaiting Work Order';
    BEGIN
    --i number := 1;
    FND_GLOBAL.apps_initialize (1001255, 50326, 700, 0);
    V_CREATED_BY := FND_GLOBAL.USER_ID;
    V_UPDATED_BY := FND_GLOBAL.USER_ID;
    v_updated_name := FND_GLOBAL.USER_name;
    for rec in cur_wtw loop
    l_eam_wo_tbl.WIP_ENTITY_ID := rec.wip_entity_id;
    l_eam_wo_tbl.ORGANIZATION_ID := rec.ORGANIZATION_ID ;
    l_eam_wo_tbl.ASSET_NUMBER := rec.ASSET_NUMBER;
    l_eam_wo_tbl.ASSET_GROUP_ID := rec.ASSET_GROUP_ID ;
    l_eam_wo_tbl.DESCRIPTION := rec.DESCRIPTION ;
    --SELECT WIP_ENTITIES_S.NEXTval INTO V_ENTITY_ID FROM DUAL;
    EAM_PROCESS_WO_PUB.PROCESS_MASTER_CHILD_WO
    (P_PO_IDENTIFIER => 'EAM'
    ,P_API_VERSION_NUMBER => 1.0
    ,P_INIT_MSG_LIST => FALSE
    ,P_EAM_WO_RELATIONS_TBL => l_EAM_WO_RELATIONS_TBL
    ,P_EAM_WO_tbl => l_eam_wo_tbl
    , p_eam_op_tbl => l_eam_op_tbl
    , p_eam_op_network_tbl => l_eam_op_network_tbl
    , p_eam_res_tbl => l_eam_res_tbl
    , p_eam_res_inst_tbl => l_eam_res_inst_tbl
    , p_eam_sub_res_tbl => l_eam_sub_res_tbl
    --, p_eam_res_usage_tbl => l_eam_res_usage_tbl
    , p_eam_mat_req_tbl => l_eam_mat_req_tbl
    , p_eam_direct_items_tbl => l_eam_direct_items_tbl
    , x_eam_wo_tbl => l_x_eam_wo_tbl
    , X_EAM_WO_RELATIONS_TBL => l__x_EAM_WO_RELATIONS_TBL
    , x_eam_op_tbl => l_x_eam_op_tbl
    , x_eam_op_network_tbl => l_x_eam_op_network_tbl
    , x_eam_res_tbl => l_x_eam_res_tbl
    , x_eam_res_inst_tbl => l_x_eam_res_inst_tbl
    , x_eam_sub_res_tbl => l_x_eam_sub_res_tbl
    -- , x_eam_res_usage_tbl =>l_x_eam_res_usage_tbl
    , x_eam_mat_req_tbl => l_x_eam_mat_req_tbl
    , x_eam_direct_items_tbl => l_x_eam_direct_items_tbl
    , x_return_status => l_x_return_status
    , x_msg_count => l_x_msg_count
    ,p_commit =>'N'
    , p_debug => 'N'
    , p_output_dir => NULL
    , p_debug_filename => 'EAM_WO_DEBUG.log'
    , p_debug_file_mode => 'w'
    END LOOP;
    END SANG_WR_TO_WO_API;
    COMMIT;
    Thanks ,
    Hanimi

  • Getting error- Cannot open as archive for CS6 Master suite collection. How to d/l & install?

    I have an account and a license key code. I purchased a new laptop that doesn't have a dvd drive. I want to download CS6 Master Suite Collection but I keep getting error "cannot open as archive"!!! I have already located the d/l files, but they will NOT install. Does anyone know how to get around this problem?

    if you downloaded an exe and 7z, they should both be in the same folder and click (or double click) the exe.
    do NOT manually try to extract the 7z file.
    if that doesn't solve your problem, what file names and extensions did you download and what are their file sizes?

  • Getting error 'Cannot open your default e-mail folder' in Exchange server 2010? what are common causes?

    I'm getting error
    'Cannot open your default e-mail folder'  when try to access my email account on exchange 2010? Why I am getting this error? Is there any particular reason? And how can I manually fix it? plz suggest!!

    Hi,
    Some questions:
    1. Can you open your account via OWA?
    2. Can you configure your account on other user's computer?
    Try disabling any 3rd-party firewall or AV programs, make sure no proxy applictions or settings.
    Thanks,
    Simon Wu
    TechNet Community Support

  • I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled

    I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled firewall 8. even tryed putting mobile in DFU mode to restore it not of this worked so please help me

    please replyyy i'm stuck on this like whole week

  • Why do I get error 150:30 when I try and send a photo to Elements 8?

    Why do I  get error 150:30 when I try and send a photo to Elements 8 from a PC with windows8?

    My wife had this problem for the past few days for a specific phone number. These instructions fixed it -- without having to restore from backup or contact the carrier.
    http://www.timothydeblock.com/blog/2014/5/12/fix-message-sent-using-invalid-numb er-of-digits-msg-2114
    Open Contacts -> select the contact -> select edit -> scroll all the way to the bottom and delete contact (delete multiple entries of the same phone number, my wife had five).
    Open the Messages app -> select Edit -> select the red circle and then select delete. Do this for both the person and the messages you received.
    Open the Settings app -> scroll down and select Messages -> turn off messages, by selecting the switch, and any other options turned on.
    Turn off your phone and then turn it back on.
    Go straight to messages and compose a new message and put in the phone number of the person you're trying to text. Send and that person should receive the text message. Add the person to your contacts and go back into message settings to turn on any other options you want on that you turned off.
    John

  • I have photoshop elements 13 and want to remove photoshop elements 10 first.  When I try to remove 10 I get error 1316 , specified account already exests and will not remove. I have windows 7

    I have photoshop elements 13 and want to remove photoshop elements 10 first.  When I try to remove 10 I get error 1316 , specified account already exests and will not remove. I have windows 7

    Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

  • Getting error while creating condition type in SPRO

    Hi ,
    can somebdy tell me why i am getting the following error while creating condition type in SPRO
    No valid change license available for message /sapcnd/
    and also while rule determination using condition type we are getting the following error.
    system error:system cannot read the structure for table
    reg
    venkat

    Hi Venkat,
    Do you have the error number code!?
    Regards,
    Michel  Bohn

  • In ECC 6 , I AM  GETTING ERROR WHILE DECLARING DATA TYPE OF BAPI

    HI,
    IN ECC 6 , i AM  GETTING ERROR" NO READ ACESS RETURN"
    EVENTHOUGH   I DECLARED  DATA TYPE   FOR EXAMPLE
    DATA: RETURN TYPE BAPIRET2.AND USING IN RFC.
    HOW TO CORRECT THE ERROR.
    pLZ HELP ME.
    REGARDS,
    RANI

    Hi Rani,
    Could you please post the piece of coding where the error comes from? Maybe we can help you then.
    Regards,
    John.

Maybe you are looking for

  • ITunes won't recognize iPod but Windows does.

    At first neither Windows nor iTunes recognized my iPod mini. I reinstalled my driver and Windows can now recognize the iPod but iTunes won't. When I connect the iPod the "do not disconnect" message stays on my screen but nothing happens in iTunes. Ca

  • Problem in Compilation of a c++ code due to usage of regexec in Solaris.

    HI all, I am using regexec as "err=regexec(&regexBuffer, m_data, maxMatches, regexMatches, eFlags)" i am having a problem running this code in Solaris although i works fine in windows. When i try to display indivial values of the structure regexec, i

  • MacBook Pro 13'' FireWire 800 Port

    Hey all I'm quite worried about the FW 800 port in my macbook pro 13''. Any time i connect my camcorder to it, it doesn't show up in iMovie nor final cut pro. However in system profiler Firewire is showing up but all that is displayed is the speed of

  • Quiero conectar mi macbook pro a un monitor necesito información

    Hola tengo mi macbook pro de 13 pulgadas y la verdad es que se me hace un poco incomoda la pantalla, por lo que la quiero conectar a un monitor LG que tengo ( aqui aparece http://www.pcenlinea.com/mp/68543.html ) y quiero saber: 1.- ¿Qué cables neces

  • PCUI  Howto Jump from Accounts app to Activities app and pass Ship-To-Party

    Hi,   In the Account Management screen (Application CRMM_ACCOUNT) I created a   button  in the Toolbar Group  ACC_OIC01.  I’m using the existing event   FUP_ACTIVITY   This button should take you to the Activities application and populate the   Ship-