Getting error code -251723766 returned from the "EthernetIP Open Session.vi" while trying to talk to a PLC

I have created a LabVIEW application using LabVIEW 2012 (64 bit) that attempts to communicate with a PLC. I do not actually have the PLC here at the Rockwell Collins facility in Cedar Rapids, Iowa.
I have sent this application to my co-worker, who is located at a different Rockwell Collins facility in Tustin, California, where the PLC is actually located.
My coworker in California is reporting that when he starts up my application under WIN7 he gets an error code of "-251723766" when the S/W performs the "Open Session" function during initialization.
I looked at the online help and the value "-251723766" is not defined.
When I run the same application under WIN7 here in Cedar Rapids I do NOT get the runtime error code of "-251723766" during initialization.
Do you have any ideas for what is causing this problem?

Hello
  I never really understood what the session parameter was all about.
  The documentation says that the session parameter is optional.
  Based on your advice I have deleted the code from my block diagram that was doing an Open Session.
  Are there any example LabVIEW programs that I can study that actully use the Ethernet/IP S/W to connect to a PLC?
  I have attached 2 screen captures that show how my LabVIEW VI's are accepting the session parameter.
  Do you think I should delete the input and output parameters for session?
  Please let me know.
  Thank you
  Todd J. Miller
  319-295-8689
Attachments:
OpenSessionProblem#4.jpg ‏107 KB
OpenSessionProblem#5.jpg ‏189 KB

Similar Messages

  • Getting error Can't read from the source or disk when moving documents from one folder to another folder in the library

    Hi,
    When we try to move documents from one folder to another folder in the document library using "Open with explorer" getting beloe error.
         Can read from the source file or disk.
        The user having below permission for the Library as well as site.
    Fullcontrol,Limited access--->Given directly
    Read,Limited access--->Givin through the all Test grp
    Contribute,Limited Access-->given through test members grp
    Read,Limited access---> givin through The group grp
    Could you please help me anyone....
    Thanks

    Hi Reddy,
    If you are moving files in two libraries in different sites, then the error will occur and it is by design that there are limitations on the DAV move commands that the DAV client is respecting.
    https://social.msdn.microsoft.com/Forums/en-US/6245f332-c609-4a7b-8e00-c8b5e46f7759/cant-move-files-using-windows-explorer-cant-read-from-source?forum=sharepointgeneral
    If you are moving files in the same library, I recommend you to use Wireshark to reveal the error message and enable IIS
    Trace Logging for Failed Requests to examine the IIS log file for troubleshooting.
    https://social.msdn.microsoft.com/Forums/en-US/47cd569d-98f2-4cca-b78e-fd178c097285/cant-read-from-the-source-file-or-disk?forum=sharepointgeneralprevious
    To narrow down the issue scope, I recommend you to test with another library and see if the copy in explorer can work.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • HT203164 while burning audio cd keep getting error code 4265 what is the problem

    Trying to burn a audio cd on itunes keep getting error code 4265 please help

    Oh man it looks like a problem with the web server.
    Its an error that happens on SAP, even my dad reported an error like this to me but i wasn't able to solve it.
    What i find is that its an error with browser incompatibility,
    Check this http://scn.sap.com/message/10338540

  • When I start the installation process, I get error code 1. This is my first time buying or trying this program, though my computer says it just downloaded 3 times today.

    I keep getting error code 1 when trying to install the software to my computer. It also downloaded 3 times today and won't go directly into the setup mode. Ideas? Suggestions?

    Cassandrab14701469 please utilize the steps listed in Error "Failed to Install" Creative Cloud Desktop application to resolve the current error.  Error 1 is often a file permission error related to the folders and files which need to be updated.  Please feel free to update this discussion if you have any questions regarding the steps listed within the document.

  • I get Error Code 1 when using the installer.  Please advise.

    When running the installer, it quits with the message:  Error Code 1.  Please advise how to resolve @this error.

    Gener7:  Good morning.  Thanks for speedy reply.  I’m running Windows 7 on a Dell Studio laptop computer.  I have CS6 installed, and it runs okay.
    I ran the CC Cleaner tool to uninstall Photoshop CC.  PCC kept crashing every time soon after I tried editing an image.  I gave up.  After the cleaning, I tried to re-install PCC.  The error code 1 showed each time I ran the installer.
    Please advise.
    Thanks.
    ==============

  • Keep getting error code 10657 when I try to open certain applications?

    Hi! I keep getting an error code when I try to open certain applications, such as iTunes or Adobe PhotoShop... it reads error 10657?

    See this archived discussion: https://discussions.apple.com/message/7005768?messageID=7005768
    Bob

  • Getting error code 2 and also "selected driver not found (-10202)" when trying to change output/input in garage band. Driver issue?

    Garage band newbie here...Been trying to record using PreSonus as my interface..having nothing but problems when I try to bring up
    garageband. Multible restarts did help at first but now I can get no sound and cant seem to load the drivers at all in output/input...any help with this problem?

    YES!!! YES!!! YES!!!
    I got it!!! Yes!!!
    Guys, I've solved my problem about that error -10202 (Selected driver not found).
    I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
    That file is called "U.S. - International.rsrc" and it's stored in the following path:
    "Macintosh HD/Library/Keyboard Layouts"
    So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
    That's the clue!
    When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
    So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
    I hope I can help all of you.
    Regards,
    Renato Veiga.

  • Getting error code 109 when trying to open pdf from an email i received

    Hi , Im getting error cod 109 when I try to open a pdf from a contact. all other pdf open fine

    I receive an error code = 0x40010015 when trying to open a PDF in Photoshop CS3 for windows.
    I do not have Illustrator to open and re-save as the forum discussion indicated.
    Is there another way to open a PDF with this error code?  I work with Quark, Photoshop and Publisher
    MartyMag22

  • Why everytime i try to download/update any application i get error code: 1009

    why everytime i try to download/update any application i get error code: 1009 either from App Store in my iPhone or from iTunes???

    Hi all.
    I had the 1013 error, have never Jailbroken my phone.
    Udating the firmware casued it to go into recovery mode and got stuck in the 1013 error loop.
    Tried editing the Host file, new computer, itunes re-install, different USB port, anti-virus off etc, NOTHING was working.
    Just as I was tempted to launch it at some unwitting object/person, cancel my contract and defacate on Apple's porch, I managed to sort it purely by restoring my phone without the sim card in.
    No idea why, dont know why i havnt seen it mentioned before either. Hopefully it may help some of you in the same situation.
    Thanks

  • SSRS Report Manager error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"

    Hi All,
    I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
    in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
    Any clue why it is happening.
    Thanks Shiven:) If Answer is Helpful, Please Vote

    Hi All,
    Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing. 
    Once I cleared the space, report started working and above error was not displaying. 
    Thanks Shiven:) If Answer is Helpful, Please Vote

  • An Error Occurred During Report Processing - Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 12019

    When I run the report on production I got the following error message:
    Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
    request on the server. The status code returned from the server was: 12019
    It hasn’t happen on Dev and Test before.                           
    I googled, The error is described as:
    12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
    The requested operation cannot be carried out because the
    handle supplied is not in the correct state.
    But I cannot find the solution for that. 
    Has it happend to you before? How to solve that?      

    Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
    Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
    code returned from the server was: 12019

  • Sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0

    sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.

    Hi SP,
    Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
    http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
    http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
    http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
    If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with adminis

    I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with administration permissions?

    If your intention is to use the trial again it will not reset if you reinstall.  It will remain in its ran out state.

  • Why do I get a 'Certutil: A referral was returned from the server' error when trying to publish my renewed Offline Root CRL to AD?

    Hi,
    I renewed my Offline Root CA and now trying to publish the CRL to AD on my Sub Issuing CA with the Certutil -dspublish command, however I get a 'Certutil: A referral was returned from the server' error.  Kinda makes sense cause the Offline Root CA is
    not on the network, so then how do I publish my renewed CRL to AD given this?
    Thanks for your help! SdeDot

    Looks like your CRL do not include Active Directory container specification and certutil don't know where to publish the CRL.
    Does root CA define LDAP url in CDP extension? If not, then you don't need to publish CRL in Active Directory, because no one will use it.
    Vadims Podāns, aka PowerShell CryptoGuy
    My weblog: en-us.sysadmins.lv
    PowerShell PKI Module: pspki.codeplex.com
    PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
    Check out new: SSL Certificate Verifier
    Check out new:
    PowerShell File Checksum Integrity Verifier tool.

  • In the past, I have had no problem copying from a network HDD to my Mac.  Recently, I cannot copy and get error code 8084.  Any thoughts?

    I cannot copy from my network drive to my iMac; I get error code 8084.  I can copy the same material from my network drive to my PC.  In the past, I have had no troubl copying to my iMac. What happened-going from OS 10.6.7 to 10.6.8?

    Thread bump.

Maybe you are looking for

  • Deploying custom report for custom hardware inventory data.

    Hi! I want do the following: 1) Extend Hardware Inventory using my own *.mof file. Like, #pragma namespace ("\\\\.\\root\\cimv2\\SMS") [ SMS_Report (TRUE), SMS_Group_Name ("My Inventory"), SMS_Class_ID ("CUSTOM|My_Inventory|4.0") ] class My_Inventory

  • How to dinamically name objects in a for statement using addChild

    Hi. I was wondering where did go the for statement with attachMovie from library in AS 3. I mean i was having in AS 2: for (i=0; i<5; i++) { attachMovie("sim", "sim"+i, i); Now in AS 3: for (var i=0; i<5; i++) { addChild(new sim()); I can't figure ou

  • I need to restore old archives in primary, so that I could apply in standby

    Hi All, I Need to restore sequence from 135777-138246 before enabling the DG broker configuration (as they are not availble in the primary or standby site). So need to restore primary Ist with these missing logs, Please let me know how would i go abo

  • Youtube & Vimeo Compression Settings.

    Hello i am using Compressor 4.1.3 and im trying to figure out the guidelines for youtube compression. There are many different variables and alot of suggestions from other users that are just guessing at what box to check. As we all know the default

  • "Error parsing MPEG Metadata file.

    I have been using Encore for about 4 years: 1.5 -> 2. Recently I have had problems with projects exported as an avi file from Premier 2 and used in a simple menu and timeline in Encore 2. Typically projects were about an hour long. Chapter points wer