Getting Error in Logic Task

Hi Experts,
We are getting the following error when we are running the logic task through DTS package:
u201CSystem.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.FormatException: Input string was not in a correct format.u201D
We encountered this error when we were executing 6 packages together but they were running in 6 diffrent databases.
They all started at the same time.
Please advise if you have encountered this error before.
Thanks and Regards,
Vivek Sharma

Vivek,
I'm curious if you were able to confirm it is due to the simultaneous starting of the packages or if there was some other work around. I am also experiencing the same behavior inconsistently after a recent upgrade to v7.5 SP05. We found that one of the data audit archive scheduled jobs in one appset was starting at the same time as our scheduled data loads in another. We have just tweaked that scheduling before submitting a ticket to SAP. In our case the UI does not show any indication of an error - it just logs it in the event log with no indication in the DTS log.
Thanks,
Jason

Similar Messages

HT1338 Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help neede

Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help needed !

Hello:
I would trot back into the Apple store and have them fix the problem (or call Applecare with a warranty issue). There is no sense in you wasting your time trying to troubleshoot things on a new computer.
Barry

Getting "error in XML task" when trying to check out projects

I get the following error when I try to check out projects on our SAN (where everything is):
Here's the error in full:
error in XML task: error writing XML document: You do not have appropriate access privileges to save file “002800.xml” in folder “0000000000004f17”.
Anybody got any clue? Appears to be a permissions issue with the Version.bundle file contents. We just set up users and groups on the SAN with LDAP Open Directory, added the Groups to the FCS System Pref Pane, but are getting no joy when logging in as a User who is a member of a Group that has been added.
Ideas, anyone?

Hi Josh, thanks for responding.
No, I did not set up anything like that - this is a pretty plain jane setup, just trying to check out an FCP project. Some work was done on the SAN while I was away, and now we can't get it to work. The IT team (I'm just the FCS guy) says permissions appear to be correct, but it isn't working, and it did before.
I presume that if user A is trying to check out a project, that FCS is doing the dirty work at a permissins level, so it'd be the FCServer machine's admin account that set up the FCS install that needs permissions....right? Or user A? In either case, we can't get it to go.
-mike

Getting Error Message "A task was canceled" while deploying solution in SharePoint 2013.

Hi All,
I am Getting below mentioned error message while trying to deploy the solution.
Error occurred in deployment step 'Recycle IIS Application Pool': A task was canceled.
Any help on this?
Thanks!!

Hi,
Would you mind provide more details on what solution you want to deploy to SharePoint?
Can you deploy a simple and clean solution such as visual web part to SharePoint?
Do you have the proper permission to deploy this solution to SharePoint?
In order to deploy a solution to SharePoint from Visual Studio, we need to be a member of farm administrators and the administrator of current machine.
Please ensure you use the farm administrator account and run the Visual Studio as Administrator, then try to deploy clean solution such as visual web part for a test.
Feel free to reply with the test result if the problem still exists.
Best regards
Patrick Liang
TechNet Community Support

Getting error while reading Task Notes

Hi,
I have a problem while opening the task from UWL. It is about reading task notes. One LDAP User had written a note previous task but now this user is deleted from LDAP. So the task screen trying to read this user while getting notes and throws exception. I also got this exception in Manage Process
Screen when press 'Show Related Tasks' button. (My system is SAP NW 7.31 SP 9)
The exception message is :
java.lang.NullPointerException: while trying to invoke the method com.sap.tc.webdynpro.services.sal.um.api.IWDClientUser.getSAPUser() of a null object returned from com.sap.tc.webdynpro.services.sal.um.api.WDClientUser.getClientUser(java.lang.String)
at com.sap.tc.bpem.wdui.notes.Utils.notesToText(Utils.java:118)
at com.sap.tc.bpem.wdui.notes.comp.Notes.reloadNotesHistory(Notes.java:352)
at com.sap.tc.bpem.wdui.notes.comp.wdp.InternalNotes.reloadNotesHistory(InternalNotes.java:181)
at com.sap.tc.bpem.wdui.notes.comp.NoteListView.wdDoModifyView(NoteListView.java:174)
at com.sap.tc.bpem.wdui.notes.comp.wdp.InternalNoteListView.wdDoModifyView(InternalNoteListView.java:482)
Kindly Helps,
Thanks

Hi Omer,
This is a known issue. This error occurs because once the creator of the note is deleted from the portal, his user id cannot get displayed to the user who is trying to read the note as the Note Creator.
You need to apply the patches mentioned in the SAP Note specified to add the 'Deleted User' text when the note is trying to be read by someone.
Its not a long procedure. All the best.
/Sid

GETTING ERROR RELATED TO TASK LIST IN ORDER CREATION USING BAPI_ALM_ORDER_M

hi all ,
I am using bapi_alm_order_maintain to create a new work order . i am passing task list group and task list counter in IT_TASK_list tables . on execution it is showing an error message " PLEASE PROVIDE THE MANDATORY TASK LIST DURING WORK ORDER CREATION.
SEEKING YOUR HELP TO REMOVE THIS ERROR.

hi all ,
I am using bapi_alm_order_maintain to create a new work order . i am passing task list group and task list counter in IT_TASK_list tables . on execution it is showing an error message " PLEASE PROVIDE THE MANDATORY TASK LIST DURING WORK ORDER CREATION.
SEEKING YOUR HELP TO REMOVE THIS ERROR.

SDK Photoshop CS5 : Get errors and continue task

Hello,
I have a script which applies any functions to contratct, expand, and any other ones...
I have any thousands images to process. Sometines, there are images which can't be processed.
I want to continue with the next image when there is a problem but to get the error and to know which image has a problem.
How can I do that?
Thanks a lot
PS : sorry for my bad english...

In your loop that you process the image files make the actual process a function. Try it and catch any unexpected error and ignore it. Maybe something like this might work
for (var i = 0; i < fileList.length; i++) {
try { processImage(fileList[i]); } // try to process images files catch and ignore errors
catch(e) { }
Just a guess... You could also log errors (e + ': on line ' + e.line + " processing ffile: " + fileList[i] ) in the catch and after the last files is processed if there were errors list all the files that failed with the associated error messages.

Disk Utility Error: The underlying task reported failure on exit 1

    #!/bin/bash
      # Author : Bill Hernandez
    # Location : Plano, Texas
    # Updated : Saturday, June 6, 2009 (1:48 PM)
    # script name : setdisk_ownerenabled
    # make sure to set permissions to execute
    <hr>
    # Description :
    <hr>
    # I've noticed that sometimes when using disk utility I cannot repair permissions, or I might get :
    # ERROR: The underlying task reported failure on exit 1
    # This shell script seems to have solved the problem.
    # It worked very well for me,
    # IF YOU USE THIS SCRIPT, IT IS AT YOUR OWN RISK...
    # DO NOT USE IT UNLESS YOU UNDERSTAND WHAT IT DOES
    # After running it, it is best to restart before using Disk Utility again
    <hr>
    # Details :
    <hr>
    # After partitioning a disk using "Disk Utility", and then begin using it, at some point I would get
    # an arror message when trying to save to one of the partitions, yet when I looked at the permissions
    # everything looked fine. I would then try to use Disk Utility to repair permissions and end up with a
    # cryptic error that pretty much told me nothing.
    # I noticed that while in Disk Utility, if I selected a partition the lower LH corner of the dialog
    # showed : Owners Enabled : No
    # I tried selecting the partitions at the Desktop and doing a (CMD-I) and at the very bottom of each
    # info dialog there was a checkbox :
    # [ ] ignore ownership of this volume
    # which I would check, even after logging in as root, and I couldn't seem to get a consistent way
    # to get rid of the permissions dialog failure, so I found the vsdbutil command which can be used
    # as follows to get partition, or disk info :
    # $ vsdbutil -c /Volumes/driveor_partitionname
    # ----> Permissions on '/Volumes/driveor_partitionname' are enabled.
    # if it is not enabled you can enable the disk or partition using :
    # $ vsdbutil -a /Volumes/driveor_partitionname
    # It will set "Owners Enabled : Yes"
    # This below script loops through the mounted disks, partitions, etc. and gives you information.
    # You can leave the three flags below all set to TRUE, or selectively use what you want and change
    # the rest to false...
    <hr>
    # CHOOSE {"TRUE", "FALSE"}
    <hr>
    getvolumestatus="TRUE"         # get "Owners Enabled : (Yes|No)" status
    setvolumestatus="TRUE"         # set "Owners Enabled : Yes"
    list_volumes="TRUE"                   # show volume names
    <hr>
    # DO NOT CHANGE ANYTHING BELOW HERE
    <hr>
    if [ $getvolumestatus == "TRUE" ]; then
     echo '============================='
     echo '$getvolumestatus'
     echo '============================='
     # get "Owners Enabled : (Yes|No)" status
     for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
     vsdbutil -c $i
     done
    fi
    <hr>
    if [ $setvolumestatus == "TRUE" ]; then
     echo '============================='
     echo '$setvolumestatus'
     echo '============================='
     sudo echo -n
     # set "Owners Enabled : Yes"
     for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
     sudo vsdbutil -a "$i"
     echo "setting Owners Enabled : Yes for ---> $i"
     done
    fi
    <hr>
    if [ $list_volumes == "TRUE" ]; then
     echo '============================='
     echo '$list_volumes'
     echo '============================='
     for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
     echo $i
     done
    fi
    <hr>


As it turns out, this didn't completely solve the problem, it solved part of the problem.
Here is a summary to the root cause of the problem.
SUCCESS...
Problem Summary : The system crashed and would hangup during boot, tried many things, until I eventually erased the disk and started over again.
iMacG5 24 GHZ Intel with One internal disk partitioned into 3 logical drives
Cub_1 OS X 10.5.7
Cub_2 OS X 10.5.7 (Carbon Copy Cloner backup of Cub_1)
Cub_3 OS X Server 10.5.7 (standard os x server setup)
At some point after setting up standard preferences, OS X Server crashed.
When I tried to restart, the machine would hang up during boot.
Finally after several attempts, ran Disk Utility from install dvd and repaired Cub_3
When I tried to run "Repair Permissions" on Cub_3 from install dvd, I got an error
Disk Utility Error: The underlying task reported failure on exit 1.
Rebooted, and started in single user mode (CMD-S) during boot until I saw the unix commands on the screen
RAN : root # fsck -fy
Then I began seeing the same command filling the screen :
posix_spawnp("/usr/sbin/mDNSResponder") could not find file or directory
Called Enterprise Support and spoke to Frank Alcorn, he said this was most likely a permissions problem and asked me to try repairing permissions from the install dvd. I told him about the error, but nevertheless I tried it again and got the same Disk Utility Error: The underlying task reported failure on exit 1..
He asked me to try booting into single user mode again, and to try
root # chmod 775 /
root # reboot
During the reboot process the machine got hung up again, and could not get the single user mode to work at all.
Frank said the command needed to be :
root # chmod 1775 /
Frank asked me if I had changed anything in file sharing, and I told him I had. He asked me what I had shared, and I said the entire drive Cub_3. He asked me what I had done for permissions, if I had denied permissions to anyone. I told him that I had set myself up as the only user that could have access to it, and when he said that's where the problem was the lightbulb went off, and it made sense.
Shortly after I set the sharing preferences is when the server crashed. It all makes sense now...
Frank said not to share the entire disk, only portions (share points) of it. I had done this in Panther Server, and Tiger Server and it worked fine, but apparently Leopard Server works a little differently, maybe more secure.
It seems to me that if sharing the entire disk, which is what I needed would cause such a problem there should have been some sort of warning from the operating system, but there wasn't. I had run into this problem several times over the past three weeks since I had started working with Leopard Server, but in each case I ended up re-installing OS X Server and starting over again.
I told him I would try to reboot from the OS X partition (Cub_1) and try it from there.
He asked me to let him know if it worked, and I said I would...
Problem FIX :
I booted back into the partition containing OS X (Cub_1) and did the following via the Terminal.
$ su - root
$ chmod 1775 /
$ reboot
During the reboot process I held down the (OPTION) key, and selected Cub_3 (the os x server partition) and sure enough after a few minutes of holding my breath the login window magically appeared. So I logged in, and did not have to re-install the server. Hallellujah....
This solved the boot hang problem. It is great to finally have an answer. In retrospect it makes sense, but that's why its hindsight...
The reason for sharing the entire disk in my mind was that since I was the only user on the system, it was easier to have one disk mounted on my workstation rather than several folders. It made sense to me, it still does. I don't need a bunch of folders, just one disk is easier...

Error: All administrative tasks must go through an Administration Port

Hi,
I run weblogic's example MedRec as a cluster. I follow the
instruction and it works.
I have a java application (swing) connecting to the cluster.
When I set MedRec to use 7001 port for both admin and other
tasks, it works fine.
Now, I set weblogic to have separated administration port
(9002). I set ssl as requested. I can deploy ejbs to the
cluster from my swing application. So, the cluster setting
seems okay.
But I want to access ejbs from my swing application. When I
try to get InitialContext using url like "t3://mymachine:8001"
or "t3s://mymachine:7002" I get error:
"All administrative tasks must go through an Administration Port"
For my understanding, request an instance of InitialContext
is not an administration task. What is wrong here? What should I do?
Any information would be appreciated. Thanks in advance.

Jimmy Ivanov <[email protected]> writes:
If you use the admin credentials then its an admin task. Try using a
different user.
andy
Hi,
I run weblogic's example MedRec as a cluster. I follow the
instruction and it works.
I have a java application (swing) connecting to the cluster.
When I set MedRec to use 7001 port for both admin and other
tasks, it works fine.
Now, I set weblogic to have separated administration port
(9002). I set ssl as requested. I can deploy ejbs to the
cluster from my swing application. So, the cluster setting
seems okay.
But I want to access ejbs from my swing application. When I
try to get InitialContext using url like "t3://mymachine:8001"
or "t3s://mymachine:7002" I get error:
"All administrative tasks must go through an Administration Port"
For my understanding, request an instance of InitialContext
is not an administration task. What is wrong here? What should I do?
Any information would be appreciated. Thanks in advance.--

Getting error message when i am trying to update the excel file using script task in ssis package

Hi Guys,
I am getting error message when I am trying to update the excel. Please find the error messages as below
Error at Update File [Update File]: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Application' is not defined., ScriptMain.vb, 32, 32
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Workbook' is not defined., ScriptMain.vb, 33, 25
Error at Update File [Update File]: The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.
Warning at Update File [Update File]: Found SQL Server Integration Services 2008 Script Task "ST_050fcae972904039b4f0fe59b7528ece" that requires migration!
and the code that   I am using is
Dell - Internal Use - Confidential
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.Office.Interop.Excel
<System.AddIn.AddIn("ScriptMain", Version:="1.0", Publisher:="",
Description:="")> _
<System.CLSCompliantAttribute(False)> _
Partial
Public Class ScriptMain
Inherits Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
Enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
End Enum
Public Sub Main()
        Dts.TaskResult = ScriptResults.Success
'Dim proc As System.Diagnostics.Process
'kill all instances of excel
'For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")
' proc.Kill()
'Next
Dim excelnacomm As
New Microsoft.Office.Interop.Excel.Application
Dim wbnacomm As Microsoft.Office.Interop.Excel.Workbook
        wbnacomm = excelnacomm.Workbooks.Open("http://test.xlsx")(renamed
the excel)
        wbnacomm.RefreshAll()
        wbnacomm.Save()
        wbnacomm.Close()
        excelnacomm.Quit()
        Runtime.InteropServices.Marshal.ReleaseComObject(excelnacomm)
End Sub
End
Class
Please let me know what could be the reason
Smash126

Download:
Microsoft Office 2010: Primary Interop Assemblies Redistributable
How to: Add or Remove References By Using the Add Reference Dialog Box / How to:
Add and Remove References in Visual Studio (C#)
Olaf Helper
[ Blog] [ Xing] [ MVP]

Getting error logical file name not maintained adequtely

Hi,
when i execute a z report and press the download botton getting error logical file name not maintained adequtely,see long text.
Below code i wriien. Please somebody help..
    DATA: lt_rows TYPE lvc_t_row.
    CASE e_ucomm.
      WHEN 'DOWNL'.
Determine and construct OS specific file name                        *
        PERFORM get_file_name_for_os.
in the above perform , i wriien
FORM build_file_name USING pf_os
                           pf_with_file_extension
                           pf_param_1
                           pf_format
                           pf_fname.
DATA: lf_para1(20) TYPE c.
pf_param_1 hold the materialnr with leading zeros not prefered in    *
download file name                                                   *
WRITE pf_param_1 TO lf_para1.
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
CLIENT                        = SY-MANDT
      logical_filename              = 'Z_MATERIAL_BOM_FILE'
      operating_system              = pf_os
      parameter_1                   = lf_para1
PARAMETER_2                   = ' '
PARAMETER_3                   = ' '
USE_PRESENTATION_SERVER       = ' '
      with_file_extension           = pf_with_file_extension
USE_BUFFER                    = ' '
    IMPORTING
EMERGENCY_FLAG                =
    file_format                   = pf_format
    file_name                     = pf_fname
EXCEPTIONS
   file_not_found                = 1
   OTHERS                        = 2
Error handling.
CASE sy-subrc.
    WHEN '1'.
      MESSAGE e014(ba) WITH 'Z_MATERIAL_BOM_FILE'.                     "error message i am getting      LEAVE.
    WHEN '2'.
      MESSAGE e213(ky) WITH 'Z_MATERIAL_BOM_FILE'.
      LEAVE.
ENDCASE.

Hi.
In file txn,
click on "Logical File Name Definition, Cross-Client" from the left.
Then click position and check for your logical file name.
If you dont get it, it means you need to create it. You can click on New Entries to create.
Thanks
Mani

I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do?

I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do? It is impossible to get any phone number for adobe.

Try these solutions: Error "Licensing has stopped working" | Mac OS

Can't setup iCloud V 4. I get error: You have exceeded the maximum number of 25000 allowed events and tasks. I get this error no matter what choice I select to setup.

Can't setup iCloud V 4. I get error: You have exceeded the maximum number of 25000 allowed events and tasks. I get this error no matter what choice I select to setup.

Is your I tunes ID an @me.com ID? If not, i cloud ONLY works with an @me.com ID. You will have two ID's. One for I cloud, one for I tunes

While Browsing SSAS 2005 Cube Getting Error " The following system error occurred from a call to GetOverlappedResult for Physical file: Logical file: '' : Insufficient system resources exist to complete the requested service."

Hi Guys,
When I try to Brows Cube (SSAS 2005), I get below error (Sometimes):
TITLE: Microsoft SQL Server 2005 Analysis Services
Server: The operation has been cancelled.
The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\674.fact.data', Logical file: '' : Insufficient
system resources exist to complete the requested service. .
The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q23.0.prt\385.fact.data', Logical file: '' : Insufficient
system resources exist to complete the requested service. .
BUTTONS:
OK
and I think due to above Error, Index on a Particular Attribute (EMP_ID) of a DIMENSION DIM_EMP is getting dropped from FEW of the Partitions (Folders) and started getting new error:
TITLE: Microsoft SQL Server 2005 Analysis Services
File system error: The following error occurred while opening the file '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\688.DIM_EMO.EMP_ID.fact.map'.
BUTTONS:
OK
I followed the above path and did not find file 688.DIM_EMO.EMP_ID.fact.map in folder PARTITION_2013Q31.0.prt. Once I rebuild the Index (ProcessIndex) for this partition, I am able to See file 688.DIM_EMO.EMP_ID.fact.map.
But again when next time I get error "Insufficient system resources exist to complete the requested service", Then 688.DIM_EMO.EMP_ID.fact.map will be dropped and will not be available in folder PARTITION_2013Q31.0.prt.
Anyone had similar issue. Could you please share your experience and resolution if any.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi Shiven,
In your scenario, the issue occur at sometimes, right? Base on my research, the issue can be caused by that calculation estimate exceeded available memory. Possibly due to possible number of dimension members and sizes of keys. And 32bit environment didn’t
allow for any expansion to the SSAS memory space.
To avoid this issue, please try to use userva to fine tune the 3GB setting down to 2900 since /3GB is the likely
cause (has been for most other customers who encountered the same problem before). The KB Articles below discuss that setting in detail.
How to use the /userva switch with the /3GB switch to tune the User-mode space to a value between 2 GB and 3 GB
Regards,
Charlie Liao
TechNet Community Support

Error when creating Task List: No Consolidation System found

All-
Configuring my Retrofit Scenario. My Project Landscape is maintained as following:
Dev(100) --> QA (200) --> Prod (300) with Retrofit (XXX)
Dev(XXX) --> QA 250
I am getting this error when I try to refresh the project or create a Task List
*No consolidation system found for <SID>-250 (project RETROFIT3)
Message no. /TMWFLOW/TRACK_N806*
If my QA client (250) is already maintained as a QA logical component. What else is missing?

Hi,
I have done something similar and getting error /TMWFLOW/TRACK_N806
My Transport route looks something like
System GND ZGND > 300 System GNQ 300> 300 System GNP
Its a standard 3 system landscape with transport routes configured as mentioned above. I followed the write up as mentioned and have kept only one transport route but how do i create a transport route from GND-140 to GNQ-300 .
The layer ZGND has been associated with client 140 which is the development client here. The layer ZGND is the consolidation layer, how else should i associate it with the client 140.
Please advice.
Regards
Ankan

Getting Error in Logic Task

Similar Messages

Maybe you are looking for