Getting error "IntelliSense: cannot open source file "Environ.h"
Hi,
I have a VC++ project which adds tool bar to arobat reader. But when i build this project using VS 2010 it's giving a error "IntelliSense: cannot open source file "Environ.h" and some other header files.
Please suggest me to resolve this issue.
Thanks
Shiva
Hi,
Thanks for yourreply, can you tell me which version or VS it supports.
Thanks
Shiva
Similar Messages
-
Bearts Audio Control Pannel will not open. Get error message cannot find startup file
Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500ZHi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas
Hi George ,
Is it happening with all the PDF' or any specific one?
Could you please share the error message so that we can replicate at our end ?
Try repairing reader once and see if that fixes the issue.
Launch Reader>Navigate to Help>Repair Adobe Reader Installation
Regards
Sukrit Dhingra -
Hi, i just installed the Visual Studio Community 2013 update 4 and after i began making a class i got this error.
Any ideas as to how i could fix this problem?Hi runy385,
Do you get any error when you install vs 2013? Do you have any version vs installed on your machine? Does VS install in C: or D: ? Please first try to repair and re-install VS 2013. If this is not working , Please refer to this thread.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/829bf89b-8693-409e-9907-d5debef42a9f/link-fatal-error-lnk1181-cannot-open-input-file-obj?forum=vcgeneral
Read this thread, I guess this issue may because the VS uses the wrong version cl.exe. Please try the solution in above thread and remember to make a backup.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I just downloaded some new drum sounds on Logic Pro X that were offered upgrades and now I get an error message in my regular work that states,
"Cannot open source file" when I go to import an mp3 large file into any template or new project.
I've trashed preferences and have plenty of room to import the large files I usually work with.
Need guidance please.Thanks Pancenter, that helped. I still hear a slight difference in the tone of voice speaking in a 48k session also.
Do you think this is the difference of being recorded at 44.1 mp3, then change to m4a and export the now 48k file into a 48k Logic session? I didn't see a way of changing Quicktime Player sample rate to 44.1, which is preferred in this instance. Future recordings I can set up at 48k but I have a bunch of files at 44.1 waiting for me that need a solution first.
Whew, and yes what a pain to do this when it worked fine before. (although for my work, I would prefer to edit as mp3 instead of turning into AIF then mp3 again- too much giggage wasted for this use)
Still open to other solutions without undoing the new sounds & such I just upgraded. -
Newbie to VC++
Getting the below error in VC++ 2005, Indesign CS4
1>------ Build started: Project: WriteFishPrice, Configuration: Debug Win32 ------
1>Performing Custom Build Step
1>Compiling...
1>WFPNoStrip.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>WFPID.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>VCPlugInHeaders.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>TriggerResourceDeps.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>SDKPlugInEntrypoint.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>Generating Code...
1>Build log was saved at "file://c:\id6sdk\build\win\objD\WriteFishPrice\BuildLog.htm"
1>WriteFishPrice - 5 error(s), 0 warning(s)
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
I have added the path of config.hpp in "addition include directories" still it is throwing the same error.
Regards,
SureshNeither the first not the second one:
am using the following path:
C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\external\asl\boost_libraries\boost
Now i have copied the complete 'external' folder to C:\id6sdk\ and added the directory now it is showing the following error:
Getting the following error:
fatal error C1083: Cannot open include file: 'IPMUnknown.h': No such file or directory C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp 46
Don't understand the concept one error leading to the other error.
How to come out of these kind of problem.
Regards,
Suresh -
Fatal error LNK1181: cannot open input file"OLDNAMES.LIB
Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are as follows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled partition)
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tp struct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hussein,
Please find below the requested information,
1. Path variable value after sourcing the apps env file,
D:\oracle\VIS\apps\apps_st\appl>APPSVIS_oracletemp.cmd
ECHO is off.
ECHO is off.
Tue 11/23/2010 02:36 PM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual Studio 2008 x86 tools.
APPSORA.cmd exiting with status 0
D:\oracle\VIS\apps\apps_st\appl>
D:\oracle\VIS\apps\apps_st\appl>echo %path%
C:\VS2008\Common7\IDE;C:\VS2008\VC\BIN;C:\VS2008\Common7\Tools;C:\Windows\Micros
oft.NET\Framework\v3.5;C:\Windows\Microsoft.NET\Framework\v2.0.50727;C:\VS2008\V
C\VCPackages;C:\Program Files\\Microsoft SDKs\Windows\v6.0A\bin;D:\oracle\VIS\ap
ps\apps_st\appl\au\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\fnd\12.0.0\bin;D:\
oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin;D:\oracle\VIS\apps\tech_st\10.1.3\app
sutil\jdk\jre\bin;D:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-m
ulti-thread\;D:\oracle\VIS\apps\apps_st\comn\util\unzip\unzip;D:\oracle\VIS\apps
\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle
\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3\apps
util\jdk\jre\bin;C:\cygwin\bin;C:\Windows;C:\Windows\system32;D:\oracle\VIS\apps
\tech_st\10.1.3\ant\bin
D:\oracle\VIS\apps\apps_st\appl>
2. gnumake version is as follows,
D:\oracle\VIS\apps\apps_st\appl>gnumake --version
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for i386-pc-mingw32
D:\oracle\VIS\apps\apps_st\appl>
Thanks,
Rajesh. -
Error message "cannot open resource file" ID CS6
CS6 InDesign, getting error message "cannot find resource file" Tried deleting prefs but didn't work.
I'm sorry. I'm running OS 10.7.5 and had previous error messages about several plugins not loading due to color panel missing. Deleted prefs, added color panel back with Manage Extensions then got the "cannot open resource file" error. I know the error message above is different and I thought I had fixed it but somehow it didn't change when I updated my post. I also have a couple of old versions of CS on my computer and I don't know if I should uninstall those or if it doesn't matter. I don't know how to do that, either. I'm not very computer literate so every problem is difficult for me. Thank you.
-
Re: fatal error LNK1181: cannot open input file"OLDNAMES.LIB
Hi,
May be it is because it appears twice on your script :
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
At 18:40 18/12/98 +0100, Hervé Depoorter wrote:
Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
>
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are asfollows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
>
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled
partition)
>
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tpstruct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
[email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>ex_rep_chan is dependent on the db library, which judging by your printout, has not finished building. Which is odd, since Visual Studio is usually smarter about dependencies. Just rebuild ex_rep_chan and you should be fine.
Lauren Foutz -
Fatal error LNK1181: cannot open input file"OLDNAMES.LIB-Reply
The OLDNAMES.LIB file should be in your Visual C++ library directory (eg c:\Program Files\DevStudio\VC\lib). If you reread TechNote 11431it explains how to set up your LIB environment variable so that the linker can find the appropriate files.
Regards
Mark Carruthers
20th Century Fox
Hervé Depoorter <[email protected]> 12/18/98 09:40am >>>
Hello, everybody.
My problem is :'fatal error LNK1181: cannot open input file "OLDNAMES.LIB"'
Somebody can help me?
Thanks a lot for your assistance.
I tried to passe a C structure between Forte and C.
I taked the exemple of forté : technote ID : 10637.
We use Forte 3.0.j.1 and I try the example on a NT4 server.
There are several projects that make up this application. They are as follows:
StructExampleGUI - This is this project. It is the GUI front
(File: StructGu.Pex) end that calls the C wrapper.
StructSharedObjects - This project defines the Employee object
(File: StructSh.Pex) that is needed for both the GUI and
for the StructExampleServices project.
StructExampleServices - This project defines the StructExample
(File: StructSO.Pex) services object. This is a restricted
project whose purpose is to actually call
the C project.
StructExampleProject - This is the External C Project that defines
(File: Struct.Pex) the interface necessary for Forte to generate
the wrapper code needed to call the C file.
StructEX.c - This is the C code that is being wrappered. It
has one function getemployee that modifies an
input output structure. The memory allocation is
done by Forte in the StructExampleServices
project.
First of all, I compile the StructEx.C
After, in the Struct.pex, I set the parameter :
HAS PROPERTY
CompatibilityLevel = 0;
ProjectType = LIBRARY;
Restricted = TRUE;
MultiThreaded = TRUE;
LibraryName = 'struct';
extended = (Externalincludedirectories='e:/Pgmprod/cpp/50/include
e:/Pgmprod/cpp/50/lib',
ExternalObjectFiles = 'O:/Herve/ForteAPI/structex');
I load the struct.pex.
Double click on the StructExampleProject
File:Configure As:Library
Make distibution and select Full make, Install in current Environment & Auto
Compile
When I tried this in the first time, I has a probleme with struct.bom. I
resolved
that. (technote 11431:Autocompile on NT fails to build the compiled partition)
But now, I'm another problem (see below) and I don't find the solution.
Somebody can help me? Thanks a lot for your assistance.
The problem : Forté say 'fatal error LNK1181: cannot open input file
"OLDNAMES.LIB"'
BEGIN FILE
Working directory is e:\pgmprod\forte\30J1\tmp\cg4\pc_nt\struct
Processing BOM file: struct.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for 80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
struct.cc
Microsoft (R) 32-Bit Incremental Linker Version 5.00.7022
Copyright (C) Microsoft Corp 1992-1997. All rights reserved.
/DLL /NOD
/OUT:struct.dll
/DEF:struct.nti
struct.obj
O:\Herve\ForteAPI\structex.obj
e:\pgmprod\forte\30J1\install\lib\qqsm.lib
e:\pgmprod\forte\30J1\install\lib\qqfo.lib
e:\pgmprod\forte\30J1\install\lib\qqdo.lib
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
e:\pgmprod\forte\30J1\install\lib\qqcm.lib
e:\pgmprod\forte\30J1\install\lib\qqkn.lib
e:\pgmprod\forte\30J1\install\lib\MSVCRT.LIB
e:\pgmprod\forte\30J1\install\lib\qqsh.lib
OLDNAMES.LIB OLDNAMES.LIB KERNEL32.LIB USER32.LIB GDI32.LIB WINSPOOL.LIB
COMDLG32.LIB SHELL32.LIB WSOCK32.LIB NETAPI32.LIB WINMM.LIB ADVAPI32.LIB
LINK : fatal error LNK1181: cannot open input file "OLDNAMES.LIB"
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__ /DLIBOO_DLL
/DWIN32_LEAN_AND_MEAN /Ie:\pgmprod\forte\30J1\install\inc\cmn
/Ie:\pgmprod\forte\30J1\install\inc\os
/Ie:\pgmprod\forte\30J1\install\inc\ds
/Ie:\pgmprod\forte\30J1\install\inc\handles /Ie:\pgmprod\forte\30J1
/Ie:\Pgmprod\cpp\50\include /Ie:\Pgmprod\cpp\50\lib /Fostruct.obj /Tp struct.cc
link @linkopt.lrf
Error during compilation, aborting.
END FILE
Completed compilation for PC NT.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>ex_rep_chan is dependent on the db library, which judging by your printout, has not finished building. Which is odd, since Visual Studio is usually smarter about dependencies. Just rebuild ex_rep_chan and you should be fine.
Lauren Foutz -
I have a old source code that are using Measurement Studio I try to compile to do some modifications to the old source code but I have the next Compiler error "C:\Program Files\National Instruments\MeasurementStudio\VC\Include\NiColorVector.h(24) : fatal error C1083: Cannot open include file: 'NiVector.h': No such file or directory" I install the Measurement Studio 2015 try to fixed the error but I can't If I search the NiVector.h I can't find it something can help me please I need the NIVector.h file
Thank you.In Visual C++ you have to go to the Tools menu and select Options... then on the Directories tab you have to add for Include files both the jdk\include AND jdk\include\win to the list of directories and then there will be no problem finding the header files.
-
I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got the error message, Cannot Open Output File.
The file could be downloaded incorrectly. Could you redownload it again from [http://getfirefox.com http://getfirefox.com]?
-
Hi Experts,
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAPHi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Hope this helps. points are welcome.
-K -
SAP Management Console : Error : MMC cannot open the file
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAPHi Alin,
Thanks for your reply, we have deleted only folders
- SAP xMII 11.5
- SAP xMII CMS 11.5
- SAP xMII Security 11.5
- Microsoft SQL Server folder
from control panel --> add and remove folder, when we were deleting these folders, IIS services were stopped by the system. After deleting the same we faced this problem.
Regards,
Study SAP -
i cant run the programme as my c++ is having the error where all the source files cannot be opened. How can i fixed it?
Hi cindy93,
Thanks for posting in MSDN forum.
To understand what happens on your side, Could you show us the complete error message? Does the source file create by yourself or some header files? Please more information.
Have you tried to include the Absolute path to your source file? Something like that.
#include "D:\..\..\source file name"
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Stong Magenta Cast on Nikon D1x Compressed Raw files
I had to get some shots that I took in 2003 with my D1x. I'm on a MAC with Lightroom 1.3. I imported the photo's into Lightroom. I noticed something strange. Some of the the images first displayed correctly in the grid view. bus as lightroom created
-
Query regarding datafile resize
Hi all, Just want to know in my testing server for reporting purpose for each month can i add new datafile to increase the space or resize the exsiting datafile becoz i am trying to maintain month wise tables in a single tablespace. Which is benefici
-
Problem:Image capture with Nokia 6020
Hi, i want an idea about the issue of "Image Capture" from midlet. I tried my image capture application with SonyEricsson W550 it is working fine, and I tried the same appliaction with[b] i-mate SP3(Windows CE mobile)and with Nokia 6020 ("Both are MI
-
Authentication vs load balancing
Hi all u guru's We are developing an application which must communicate securely with a farm of application servers through load balancing (all servers are assigned virtual ip). The constraint is that all servers are independent ( do not manage back
-
New saving option in CS5's Preferences
Maybe someone could explain to me what is this option for: in CS5 in Edit-Preferences-General: Saving Files Fireworks PNG Save per page thumbnails