Getting Error Page after two VO substitution - urgent, please help
Hi All,
I substituted two VOs in the CWB Allocation page. Did everything (I think) according to Oracle doc, but when trying to open that page I am getting ERROR PAGE and 'You have encountered an unexpected error. Please contact the System Administrator for assistance. '
Please, help. I understand it is something fundamentally wrong, but it does not give me any error messages to even start working on.
Thanks a lot.
SR
Hi Arvind,
I have turned Diagnostics to Yes on my user level, but I am getting the same:
Error Page
You have encountered an unexpected error. Please contact the System Administrator for assistance.
And there is no link on this page except the Logout link, which, of course, just logs me out of apps.
Similar Messages
-
Hi all,
I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
Thanks in advance!Most of the documents have sensitive info on them. I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
Thanks for you help. -
Getting error "Screen output area too small"! Please help!
I am getting an error "Screen output area too small" when looping through some huge internal table and sending to spool "on change of some value" in my internal table. Could someone please help me in correcting this? Rewards assured.
Thanks.
MithunCheck the simple program and have tested ,it works great( IN ECC 6 Version)
REPORT ztestspool.
DATA : arc_params TYPE arc_params,
v_print_parms TYPE pri_params,
w_valid TYPE char1,
w_valid_spool TYPE char1.
CONSTANTS : lc_paart LIKE sy-paart VALUE 'X_65_132', " Paper Format
lc_locl TYPE sypdest VALUE 'LOCL', " Destination
c_x TYPE char1 VALUE 'X'.
Setup the Print Parmaters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority = space
immediately = space
new_list_id = c_x
no_dialog = c_x
user = sy-uname
IMPORTING
out_parameters = v_print_parms
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc NE 0.
CLEAR : v_print_parms.
ENDIF.
The printer destination has to be set up
IF v_print_parms-pdest = space.
v_print_parms-pdest = lc_locl.
ENDIF.
Explicitly set line width, and output format so that
the PDF conversion comes out OK
*v_print_parms-linsz = c_linsz.
v_print_parms-paart = lc_paart.
NEW-PAGE PRINT ON PARAMETERS v_print_parms NO DIALOG.
*PERFORM display_output.
write :/ 'This is test for spool generation'.
NEW-PAGE PRINT OFF.
Thanks
Seshu -
Getting Error:closing a connection for you. Please help
Hello All,
I'm using jboss3.2.6. I used ejb2.1 (session bean and entity bean[BMP]). I did few data base transations in cmp and few in simple data source connection.
I'm getting below errors occasionally
'No managed connection exception
java.lang.OutOfMemoryError: Java heap space
[CachedConnectionManager] Closing a connection for you. Plea
se close them yourself: org.jboss.resource.adapter.jdbc.WrappedConnection@11ed0d
5
I've given below my dao connection code here,
package com.drtrack.util;
import java.sql.Connection;
import java.sql.SQLException;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.DataSource;
public class DAOUtil {
private static DataSource _ds;
public Connection con;
public DAOUtil() throws SQLException {
try {
if (_ds == null)
assemble();
if(_ds != null && con == null) {
con = _ds.getConnection();
}catch(SQLException ex) {
ex.printStackTrace();
private void assemble() {
Context ic = null;
try {
ic = new InitialContext();
DrTrackUtil drutil = new DrTrackUtil();
_ds = (DataSource) ic.lookup("java:/" + drutil.getText("SOURCE_DIR"));
drutil = null;
}catch (Exception e) {
e.printStackTrace();
}finally {
try {
ic.close();
}catch(NamingException ne) {}
public void closeConnection() throws SQLException {
if(con != null)
con.close();
con = null;
}below is the code with get connection and doing transaction in it.
public static AccountMasterValueBean getAccountMasterByAcctId(String acctId) {
AccountMasterValueBean bean = null;
DAOUtil dao = null;
CallableStatement cst = null;
ResultSet rs = null;
try {
dao = new DAOUtil();
cst = dao.con.prepareCall(DrTrackConstants.MSSQL_USP_ACCOUNTMASTER_BY_ACCTID);
cst.setObject(1, acctId);
rs = cst.executeQuery();
if(rs != null && rs.next()) {
bean = new AccountMasterValueBean(
Integer.valueOf(rs.getString("accountkeyid")),
rs.getString("latitude"),
rs.getString("longitude"));
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
if(rs != null){
try {
rs.close();
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
rs = null;
if(cst != null) {
try{
cst.close();
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
cst = null;
if(dao != null) {
try {
dao.closeConnection();
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
dao = null;
return bean;
}I closed connections, resultsets and statements properly.
Why I'm getting these errors.? Where I'm doing wrong. ? Please help me. I have to fix them ASAP.
Thanks.Hello All,
I'm using jboss3.2.6. I used ejb2.1 (session bean and entity bean[BMP]). I did few data base transations in cmp and few in simple data source connection.
I'm getting below errors occasionally
'No managed connection exception
java.lang.OutOfMemoryError: Java heap space
[CachedConnectionManager] Closing a connection for you. Plea
se close them yourself: org.jboss.resource.adapter.jdbc.WrappedConnection@11ed0d
5
I've given below my dao connection code here,
package com.drtrack.util;
import java.sql.Connection;
import java.sql.SQLException;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.DataSource;
public class DAOUtil {
private static DataSource _ds;
public Connection con;
public DAOUtil() throws SQLException {
try {
if (_ds == null)
assemble();
if(_ds != null && con == null) {
con = _ds.getConnection();
}catch(SQLException ex) {
ex.printStackTrace();
private void assemble() {
Context ic = null;
try {
ic = new InitialContext();
DrTrackUtil drutil = new DrTrackUtil();
_ds = (DataSource) ic.lookup("java:/" + drutil.getText("SOURCE_DIR"));
drutil = null;
}catch (Exception e) {
e.printStackTrace();
}finally {
try {
ic.close();
}catch(NamingException ne) {}
public void closeConnection() throws SQLException {
if(con != null)
con.close();
con = null;
}below is the code with get connection and doing transaction in it.
public static AccountMasterValueBean getAccountMasterByAcctId(String acctId) {
AccountMasterValueBean bean = null;
DAOUtil dao = null;
CallableStatement cst = null;
ResultSet rs = null;
try {
dao = new DAOUtil();
cst = dao.con.prepareCall(DrTrackConstants.MSSQL_USP_ACCOUNTMASTER_BY_ACCTID);
cst.setObject(1, acctId);
rs = cst.executeQuery();
if(rs != null && rs.next()) {
bean = new AccountMasterValueBean(
Integer.valueOf(rs.getString("accountkeyid")),
rs.getString("latitude"),
rs.getString("longitude"));
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
if(rs != null){
try {
rs.close();
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
rs = null;
if(cst != null) {
try{
cst.close();
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
cst = null;
if(dao != null) {
try {
dao.closeConnection();
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
dao = null;
return bean;
}I closed connections, resultsets and statements properly.
Why I'm getting these errors.? Where I'm doing wrong. ? Please help me. I have to fix them ASAP.
Thanks. -
Restart Error message after installing additional RAM. PLEASE HELP.
I have a Powerbook G4, 1.33 GHz processor, running 10.3.9. I just recently upgraded my RAM to 1GB, from 256MB. After installing the RAM I have started to encounter problems, where applications will automatically shut down, and also I am receiving a message that cover the entire screen, and states that I must restart the system by holding the power button down, when this appears nothing is functional, I can only power off. I have insured the RAM was installed correctly. I followed all proper procedures when installing. Does this mean the RAM is bad, or something else? Please help!!
Welcome to the Apple discussions.
Our Powerbooks are sensitive souls when it comes to RAM, due to the Apple architecture and how power is throttled on the memory bus. While memory can meet the Apple specs, typically cheaper RAM can fail with the symptoms you're seeing. Recommend using Crucial, Kingston (not their value ram memory, though), or Samsung. Crucial guarantees their memory will work when chosen from the memory selector on their web site.
It is possible you've just got some bad memory and could get a replacement, however, if the brand is unknown, you may want to return it and obtain one of the brands above. -
Error ejecting iPod mini from iTunes - URGENT please help!
when i try to press the eject button on iTunes , a thing pops up saying " The iPod cannot be ejected because it contains files that are in use by another application"
and i don't want to take a risk and lose info on my iPod b/c it says "do not disconnect"
i don't know what could have caused this, except that about 45 min. before, i downloaded the new iPod mini updater. Please help!!! it's very urgent! thanks =D
P.S. - it usually ejects just fineHey.I have the same problems when i connect my iPod mini to my laptop it says can't locate songs and it will only download 11 of my songs. I tried everything that you did and nothing worked my next step is to call up help support.
-
Getting error while calling two BAPIs
Dear ABAPers,
I'm stuck into a problem.
I have a situation where I'm using BAPI, WS_DELIVERY_UPDATE to update a delivery.
Then after this I have post a GR so for that I'm using BAPI_GOODSMVT_CREATE.
Now my problem is when I'm calling BAPI_GOODSMVT_CREATE it gives me an error
"CODE is not supported by BAPI2017_GOODSMVT_CREATE". I check my code thoroughly, but didn't find anything in that
which was wrong.
Again, if I try to do the same, in debugging mode, its processes me in the way it should, without any error.
Also, If I use a hard coded DELAY of 2 mins, in my program after WS_DELIVERY_UPDATE, it again processes perfectly.
Now I've put COMMIT AND WAIT and FM DEQUEUE_ALL after WS_DELIVERY_UPDATE, but still not working, and this I'm getting
error from BAPI_GOODSMVT_CREATE - "No Items Transfered".
Please help me sort this issue.
Regards,
VarunHi varunchopra,
the SAP documentation is not 100 % clear here: They say, with COMMIT WORK all high-priority ("VB1") update function modules are executed in the order of their registration and in a shared database LUW. With WAIT addition, the calling program will continue after the update work process has executed the VB1 function modules.
Probably BAPI_WS_DELIVERY_UPDATE will also trigger one or more VB2 update functions that will keep the objects locked.
Ten years ago we used this code in a similar situation to wait for the update task for a material being changed:
FORM WAIT_UPDATE.
USING P_MAX_WAIT_SECONDS TYPE I
CHANGING P_SUBRC LIKE SY-SUBRC.
DATA:
L_ENDTIME LIKE SY-UZEIT,
L_TABIX LIKE SY-TABIX,
L_TRIES TYPE I,
L_SUCCESS LIKE SY-SUBRC,
L_ANSW TYPE C,
L_TRY_AGAIN LIKE RMCLS-XFLAG VALUE 'X'.
GET TIME.
L_ENDTIME = SY-UZEIT.
ADD P_MAX_WAIT_SECONDS TO L_ENDTIME.
WHILE L_TRY_AGAIN = 'X'.
LOOP AT ITAB.
PERFORM CHECK_LOCK_EMMARCE
USING ZAUF-WERKS ITAB-MATNR CHANGING P_SUBRC.
GET TIME.
IF P_SUBRC <> 0 OR SY-UZEIT >= L_ENDTIME.
EXIT. "Loop
ENDIF. " sy-subrc = 0.
ENDLOOP. " AT itab.
IF P_SUBRC = 0.
CLEAR: L_TRY_AGAIN.
ELSE.
IF SY-UZEIT >= L_ENDTIME .
PERFORM POPUP_TO_CONFIRM_WAIT
USING P_MAX_WAIT_SECONDS CHANGING L_ENDTIME P_SUBRC.
IF P_SUBRC <> 0.
CLEAR L_TRY_AGAIN.
ELSE.
CLEAR P_SUBRC.
ENDIF. " p_subrc <> 0.
ENDIF. " sy-uzeit >= l_endtime.
ENDIF. " p_subrc = 0.
ENDWHILE. " l_try_again = 'X'.
ENDFORM. " WAIT_UPDATE
The coding of CHECK_LOCK_EMMARCE was derived from SM12 lock overview and used FUNCTION 'ENQUE_READ'. Today I would just try to lock the object with ENQUEUE function - if you get foreign lock error, the updatze task lock is not yet released.
Monitor SM12 during test run to identify which lock object must be checked.
The you have to decide: If you put a WAIT UP TO 1 SECONDS in the wait loop, you may lose up to 1 second per delivery. If you just LOOP until the locks are released you may put some non-necessary load on the machine.
This way will be faster than any unconditional wait - which may sometimes not be long enough.
Regards,
Clemens -
I keep getting Error 7 after I have reinstalled iTunes. What should I do?
I keep getting Error 7 after I have re installed iTunes. What should I do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Unable to update or restore new iPad Mini 2. Get error 3014 on two different Macs.
Unable to update or restore new iPad Mini 2. Get error 3014 on two different Macs. This is a new out of the box iPad Mini 2. Am on a managed network, but have not had this problem previously.
First thing to do is make sure you have the latest version of iTunes on your computer.
This Apple support page will provide more information:
Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support -
When install FF4, get error page unmark "Offline" in menu.No menu
Downloaded FF4. Get error page to uncheck "Work Offline." There is no menu on page. Clicked try again. No help. Removed FF4, turned off computer, and reinstalled. Still get error page. Am real novice at 84 yoa.
thank you - that does make sense except i have another computer that connects to the internet in the same way but it doesnt happen on that one. i didnt change anything - it just started a couple of weeks ago after i updated firefox to 11.0. cant find any settings in firefox to alter either - thanks for the help
-
hi i updated my iphone 4 with itunes and now i cannot use my phone as i keep getting error 16 after trying to restore my phone....i cannot afford to replace ..can any body help me...the phone is out of warrenty so apple do not want to know....please any help
https://discussions.apple.com/message/23100453#23100453
more hits from the search
https://www.google.dk/search?q=restore+itphone+error+16&oq=restore+itphone+error +16&aqs=chrome..69i57j0l5.11485j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8 -
Why am i getting error -43 after mix down on audio recording?
why am i getting error -43 after mix down on audio recording?
to where are you trying to mix down the file? a -43 is a file not found error
-
HT201210 I am getting error 29 after i update my I phone 3gs?
I am getting error 29 after i update my I phone 3gs?Need help, thanks!
http://support.apple.com/kb/TS3694#error29 see link
-
When I click to article "Disciplined PL/SQL" by Steven Feuerstein on OTN home page, some times I get error page. Some time I am able to see the article. Even links to List1, List2 etc on the article always results in error page. Then on the article when ever I clieck on "More article by Feuerstein", I always get error page that this page has either moved blah blah blah. What is going on? Can you please resolve issues with OTN article references and links.
These links all appear to be working fine. Perhaps you encountered a temporary caching problem...
-
Urgent, Please help me in this problem.I am getting problem while installation
I am using Windows 8 in my system. I am trying to install Sql Server in system . Everything is fine, but finally when i click on install button i am getting the following error .
please help me quickly. I well be thankful to you.Triple post meanwhile:
http://social.msdn.microsoft.com/Forums/en-US/7fafa499-ca1e-42f7-a117-73df924d9847/urgent-please-help-me-in-this-problemi-am-getting-problem-while-installation?forum=sqlsetupandupgrade
http://social.msdn.microsoft.com/Forums/en-US/a1c7978c-2f84-495f-a8b6-9e9fe46654d7/getting-problem-while-installing-sql-server-2012?forum=sqlsetupandupgrade
Olaf Helper
[ Blog] [ Xing] [ MVP]
Maybe you are looking for
-
somehow i couldn't get rid of one website called www.searchqu.com/405 set as my homepage... I tried all solutions given to change the homepage but whenever i restarted firefox that homepage used to come automatically.. So, I deleted the profile (even
-
Hello everyone, this is my configuration: MacBook Pro with OS X 10.4.10 and all the updates; a desktop with Windows XP on it; Canon MP810 as a printer and printfab as a driver. I have got a Windows printer and I've had the "error: 256" when I try to
-
Is Apple going to manufacture IPAD with improved sound quality?
Is Apple going to manufacture IPAD with improved sound quality? I don't like to stream movies on IPAD due poor sound quality.
-
Troubleshooting Cisco SG220-26P
Hi, I'm having a strange behaviour in a new bought Cisco SG220-26P. It's connected with multimode fiber transceivers SFP MGBSX1. I've multiple packets with errors in Interfaces Statistics. Changed transceivers, cables... First I thought it was some b
-
hi i have problem with my mac os x10.5.8 i cant't download new upload ?and the problem is that i can't found my app store on my mac .any help plz