Getting Error trying to install Cisco Prime Optical 9.6

Good Morning all,
I am having no luck trying to install CPO 9.6. I am trying to install on a Red Hat LINUX 5 machine. Install get to the pre-install checklist then fails on the oracle check, then exits the install. Here is what the error log shows.
Oracle Pre Installation Checks: for Linux
Check Minimum value of RAM allowed to install Oracle
Actual size value of RAM is 48304932 Kb that is sufficient to Install Oracle
Check the correct tmp size for Linux to install Oracle
Actual tmp size is 238785284 Kb that is sufficient to install Oracle
Check the correct oracle base disk size for Linux to install Oracle
Actual disk size for oracle base is 238785292 Kb that is sufficient to install Oracle
Check the correct OS version for Linux to install Oracle
Actual OS Version for Linux is Red Hat Enterprise Linux Server release 5 that is correct
Check the correct OS patches for Linux to install Oracle
Patch list to check: none
End of Oracle Pre Installation Checks for Linux
Oracle Pre Installation Checks: packages for Linux
The package kernel-headers is not installed
The package sysstat is not installed
The package libaio-devel is not installed
CRITICAL: The package gcc is essential
The package gcc-c++ is not installed
The package unixODBC-devel is not installed
The package libstdc++-devel is not installed
The package elfutils-libelf-devel is not installed
The package unixODBC is not installed
The package elfutils-libelf-devel-static is not installed
The package glibc-headers is not installed
End Oracle Pre Installation check of packagesLinux
I have no idea what to do next, any help would be appreciated.
Thanks,
Steve

These instructions were adapted from
http://www.confignotes.com/2011/01/how-to-add-a-repository-manually-in-rhel6/
1. Log in as root.
2. Disable SELinux from the top menu bar at System | Administration | Security Level & Firewall
3. Attach the RHEL load DVD either from the DVD drive or by attaching the iso.
4. Open a terminal.
a. # mkdir /srv/RHEL5_8
b. # cp -rpf /media/RHEL_5.8\ x86_64\ DVD/Server/* /srv/RHEL5_8
/* this takes a while. be patient. */
c. # cp /media/RHEL_5.8\ x86_64\ DVD/RPM-GPG-KEY-redhat-release /srv
/* Remember to eject the DVD, otherwise the system will try to reload RHEL at the next reboot */
5. Create “/etc/yum.repos.d/RHEL_5_8.repo” with the following contents:
[baseOS]
name=Red Hat Enterprise Linux $releasever – $basearch baseOS
baseurl=file:///srv/RHEL5_8
gpgkey= file:///srv/RPM-GPG-KEY-redhat-release
enabled=1
gpgcheck=1
[ScalableFileSystem]
name=Red Hat Enterprise Linux $releasever – $basearch ScalableFileSystem
baseurl=file:///srv/RHEL5_8
gpgkey= file:///srv/RPM-GPG-KEY-redhat-release
enabled=1
gpgcheck=1
[Workstation]
name=Red Hat Enterprise Linux $releasever – $basearch Workstation
baseurl=file:///srv/RHEL5_8
gpgkey= file:///srv/RPM-GPG-KEY-redhat-release
enabled=1
gpgcheck=1
6. Verify it works
a. # yum update
b. should be no errors
7. Update RHEL where <package name> is the name of the desired package.
a. # yum install <package name>
Before CPO can be installed, RHEL must have several packages added. See separate instructions for creating a local update repository on RHEL, then install the packages below.
+ kernel-headers
+ sysstat
+ libaio-devel
+ gcc-c++
- glibc-headers
- libstdc++-develk
+ unixODBC-devel
- unixODBC
+ elfutils-libelf-devel-static
- elfutils-libelf-devel

Similar Messages

Error coming while installing Cisco Prime 4.2 on Windows Server 2008 R2

Hi,
I'm trying to install Cisco Prime 4.2 on Windows Server 2008 R2. While initiating the installation, message box "Error: csv not found" appears, and the installation terminates.
Is there any csv template need to be copied at any location before hand?

Are you installaing LMS 4.2.4 directly ?
Looking at the error ,it looks like ...
If yes then you need to follow the below path:
The installation path of LMS 4.2.4 : LMS 4.2 > LMS 4.2.2 > LMS 4.2.4
Thanks-
Afroz
[Do rate the useful post]

TS1406 having problems installing itunes on computer so I can sysc with iphone. had to download only then installed itunes. getting error trying to install AppleMobileDevice64.

having problems installing itunes on computer so I can sysc with iphone. had to download only then installed itunes. getting error trying to install AppleMobileDevice64.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Get error trying to install Unmult on AECC 13.2

When I try to copy or move the Unmult effect into either the AE effects folder or the Common/Plug-ins/7.0/MediaCore folder, I get error code 0x80004005.
I tried using both the 32-bit and 64-bit versions and both gave me the same error code. I have a 64-bit system FWIW.
Suggestions?

This is the version I downloaded: Red Giant - Products - Knoll Unmult 1.0, 1.1
If that's not the current version, let me know where I can get the current version
Also, I got it installed just fine on my Mac at home. My issue is on my PC at work.

Getting error trying to install Midlet

Hello,
I am trying to install a Midlet on my Raspberry Pi (ME 3.3) by doing the following:
pi@raspberrypi ~/java_me_3.3/bin $ ./installMidlet.sh /home/pi/apps/TMP36rpi.jar
configdb_load_to_db error: Unable to open file, trying to recover from the temporal one
configdb_load_to_db error: temporal settings file is unavailable
ERROR: Unable to read configuration file(s). Check that ini file(s) exists in your application directory.
javacall_initialize_configurations_from_file failed
pi@raspberrypi ~/java_me_3.3/bin $In the directory /home/pi/apps I have the following files:
pi@raspberrypi ~/java_me_3.3/bin $ ls /home/pi/apps
TMP36rpi.jad TMP36rpi.jar
pi@raspberrypi ~/java_me_3.3/bin $It doesn't work and I don't know what I am doing wrong.
Thanks
Andy

Andrey,
still no luck:
pi@raspberrypi ~/java_me_3.3/bin $ chmod 666 jwc_properties.ini
pi@raspberrypi ~/java_me_3.3/bin $ ./installMidlet.sh file:///home/pi/apps/TMP36rpi.jar
argv[1] = runMidlet
argv[2] = -1
argv[3] = com.sun.midp.scriptutil.CommandLineInstaller
argv[4] = I
argv[5] = file:///home/pi/apps/TMP36rpi.jar
Command line parameters are passed.
javacall_event_initialize: events system initialized
Events system initialized.
Time system initialized.
JavaTask thread initialized.
Starting JavaTask
* rootfs -> /
* /dev/root -> /
* devtmpfs -> /dev
* tmpfs -> /run
* tmpfs -> /run/lock
* proc -> /proc
* sysfs -> /sys
* tmpfs -> /run/shm
* devpts -> /dev/pts
* /dev/mmcblk0p1 -> /boot
Error installing the suite: null
java.io.IOException
- com.sun.io.j2me.file.Protocol.connect(), bci=18
- com.sun.io.j2me.file.Protocol.openPrimImpl(), bci=341
- com.sun.io.j2me.file.Protocol.openPrim(), bci=5
- javax.microedition.io.Connector.open(), bci=47
- javax.microedition.io.Connector.open(), bci=3
- com.sun.midp.installer.FileResourceDownloader.downloadResource(), bci=57
- com.sun.midp.installer.ResourceDownloaderBase.downloadToFile(), bci=29
- com.sun.midp.installer.ResourceProvisioning.downloadJar(), bci=59
- com.sun.midp.installer.Installer.installStep7(), bci=11
- com.sun.midp.installer.Installer.performInstall(), bci=167
- com.sun.midp.installer.Installer.installJar(), bci=140
- com.sun.midp.scriptutil.CommandLineInstaller.run(), bci=342
- java.lang.Thread.run(), bci=5
Finishing JavaTask
pi@raspberrypi ~/java_me_3.3/bin $However if I run the AMS CLI (via port 65002) it works using the file:// protocol. CAn it be some kind of permission problem?
--Andy

Unable to install Cisco Prime 4.2.1

Hello @ all,
i´m trying to install Cisco Prime 4.2.1 but i´m getting following error.
Can someone give me a hint why the installation failes?
Thank you.
Regards,
Chris

Nevermind. I first have to install 4.2

This is the messsage i get when trying to install nano 7th Generation........windows found driver software for your device but encountered as error whille attempting to install it .......what do i do plzs help.

This is the messsage i get when trying to install nano 7th Generation........windows found driver software for your device but encountered as error whille attempting to install it .......what do i do help plzs.

How to restart the Apple Mobile Device Service (AMDS) on Windows

Hi I get this error trying to install directx 9

Hi I get this error trying to install directx 9 because I need this to run a program that I'm using and it comes up with this error. Please Help. Thanks :)
09-13-2014 00:27 : DTC Install error = 0, Enter MsDtcAdvancedInstaller::Configure, base\wcp\plugins\msdtc\msdtcadvancedinstaller\msdtcadvancedinstaller.cpp (419)
09-13-2014 00:27 : DTC Install error = 0, Action: None, base\wcp\plugins\msdtc\msdtcadvancedinstaller\msdtcadvancedinstaller.cpp (448)
09-13-2014 00:27 : DTC Install error = 0, Entering CreateXATmSecurityKeyCNG, base\wcp\plugins\msdtc\msdtcadvancedinstaller\msdtcadvancedinstaller.cpp (1758)
09-13-2014 00:27 : DTC Install error = 0, Exiting CreateXATmSecurityKeyCNG, base\wcp\plugins\msdtc\msdtcadvancedinstaller\msdtcadvancedinstaller.cpp (1934)
09-13-2014 00:27 : DTC Install error = 0, Exit MsDtcAdvancedInstaller::Configure, base\wcp\plugins\msdtc\msdtcadvancedinstaller\msdtcadvancedinstaller.cpp (506)
09-13-2014 00:45 : DTC Install error = 0, SysPrepDtcCleanup : Enter, com\complus\dtc\dtc\adme\deployment.cpp (1928)
09-13-2014 00:45 : DTC Install error = 0, SysPrepDtcCleanup : Exit, com\complus\dtc\dtc\adme\deployment.cpp (1993)
09-13-2014 00:46 : DTC Install error = 0, SysPrepDtcGeneralize : Enter, com\complus\dtc\dtc\adme\deployment.cpp (1999)
09-13-2014 00:46 : DTC Install error = 0, SysPrepDtcGeneralize : Exit, com\complus\dtc\dtc\adme\deployment.cpp (2070)
11-15-2014 10:03 : DTC Install error = 0, SysPrepDtcSpecialize : Enter, com\complus\dtc\dtc\adme\deployment.cpp (2076)
11-15-2014 10:03 : DTC Install error = 0, InstallContacts, Enter, com\complus\dtc\dtc\adme\deployment.cpp (310)
11-15-2014 10:03 : DTC Install error = 0, InstallContacts, Exit, com\complus\dtc\dtc\adme\deployment.cpp (389)
11-15-2014 10:03 : DTC Install error = 0, SysPrepDtcSpecialize : Exit, com\complus\dtc\dtc\adme\deployment.cpp (2138)

From where have you downloaded the installer?
Try from here:
http://www.microsoft.com/en-us/download/details.aspx?id=8109
This is the "redistributable" version of DirectX 9.0c.
S.Sengupta, Windows Entertainment and Connected Home MVP

Can i install Cisco prime infrastructure 1.3 with 1.1 license.

Can i install Cisco prime infrastructure 1.3 with 1.1 license.To be more precise it will be fresh installation
but the licenses I have is of 1.1.As per my overview from Cisco prime Infrastructure 1.2 NCS and NCS(WAN)
has been bundled into one service.But both were seperate entities in Cisco Prime Infrastructure 1.1.

It doesn't matter if you want to make a new installation or an upgrade. The questions is the license.
The base license is necessary for network management nodes (devices). But to get updates for your system you need the additional to your Base License the Lifecycle License (which can be ordered for 12, 24 or 36 months).
The Lifycycle License is also based on the number of managed devices. In your case 50 devices. So you have that License - congratulations!
Otherwise order the Lifecycle License for 50 devices (L-N-PI12-50-M). This generates CON-PSUU-PI12LF50 for 12 months, list price 414,81$. Then Upgrade from 1.1 to 1.2, patch the system and upgrade to 1.3.
Have fun,
Chris

How to install cisco prime 2.1 on a empty HP server

Hi all,
i want to install cisco prime 2.1 using the physical appliance ISO File on a new empty HP Server, because we have no vmware environment.
After booting from the ISO File I receive the error "connot find kickstart file on cdrom". Because of this I am not able to install the software.
I have loaded the ISO image two times from cisco, so im pretty shure that the images is not broken.
Any Idea?
Thanks!

If you have control of an HP Server, why don't you load VMware into the server? PI requires VMware and can't be loaded onto a "bare metal" frame.

I KEEP GETTING ERROR -3 WHEN INSTALLING THEN ERROR -2093 WHEN I TRY TO RUN

I KEEP GETTING ERROR -3 WHEN INSTALLING QUICK TIME, AND THEN WHEN I TRY TO RUN ITUNES I GET ERROR -2093. PLEASE HELP!! I HAVE DELETED AND REINSTALLED THIS MORE THAN 5 TIMES ALREADY! I HAVE AN ACER COMPUTER WITH WINDOWS XP. IF YOU CAN HELP ME PLEASE REPLY OR WRITE ME AT [email protected]

Hi DaFudgeWizzad57392483,
Please refer to the threads below where this issue has been addressed:
1. Installing Creative Cloud-Error 205
2. Creative Cloud Error 205
3. Creative Cloud App, installation error code 205
Regards,
Sheena

HT5957 Ios7.0.2 keep getting error message cannot install on my IPAD 2. Please help.

Cannot install IOS 7.0.2 on my ipad 2. Keep getting error message cannot install. Please help

Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem. Then try again.

Cisco Prime Optical Major/Minor releases

Hello.
A Cisco Prime Optical upgrade from version 9.6 to 9.8 is considered a minor or a major upgrade?
Thanks,
João.

Major upgrades are generally considered changing the number to the left of the decimal place. The first ordinal to the right (i.e. .6 to .8) would thus be a minor upgrade.

HT4623 When I try to update my iPad 3 4g to iOS 5.1.1, i keep getting error trying to find software update, I've tried several things already, but nothing seems to work.

When I try to update my iPad 3 4g to iOS 5.1.1, i keep getting error trying to find software update, I've tried several things already, but nothing seems to work.

Perhaps, iTunes can't communicate with the Apple uodate servers. Temporarily disabling your firewall and antivirus software would help. Take a look at this.
Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support

I get error 1309 when installing a downloaded version of Lightroom 5 trial

I get error 1309 when installing a downloaded version of Lightroom 5 trial

See the following help document:
Error 1321 or 1309 | Install | CS4, CS5, CS5.5 | Windows
http://helpx.adobe.com/creative-suite/kb/error-1321-or-1309-install.html

Getting Error trying to install Cisco Prime Optical 9.6

Similar Messages

Maybe you are looking for