Getting error trying to install Midlet
Hello,
I am trying to install a Midlet on my Raspberry Pi (ME 3.3) by doing the following:
pi@raspberrypi ~/java_me_3.3/bin $ ./installMidlet.sh /home/pi/apps/TMP36rpi.jar
configdb_load_to_db error: Unable to open file, trying to recover from the temporal one
configdb_load_to_db error: temporal settings file is unavailable
ERROR: Unable to read configuration file(s). Check that ini file(s) exists in your application directory.
javacall_initialize_configurations_from_file failed
pi@raspberrypi ~/java_me_3.3/bin $In the directory /home/pi/apps I have the following files:
pi@raspberrypi ~/java_me_3.3/bin $ ls /home/pi/apps
TMP36rpi.jad TMP36rpi.jar
pi@raspberrypi ~/java_me_3.3/bin $It doesn't work and I don't know what I am doing wrong.
Thanks
Andy
Andrey,
still no luck:
pi@raspberrypi ~/java_me_3.3/bin $ chmod 666 jwc_properties.ini
pi@raspberrypi ~/java_me_3.3/bin $ ./installMidlet.sh file:///home/pi/apps/TMP36rpi.jar
argv[1] = runMidlet
argv[2] = -1
argv[3] = com.sun.midp.scriptutil.CommandLineInstaller
argv[4] = I
argv[5] = file:///home/pi/apps/TMP36rpi.jar
Command line parameters are passed.
javacall_event_initialize: events system initialized
Events system initialized.
Time system initialized.
JavaTask thread initialized.
Starting JavaTask
* rootfs -> /
* /dev/root -> /
* devtmpfs -> /dev
* tmpfs -> /run
* tmpfs -> /run/lock
* proc -> /proc
* sysfs -> /sys
* tmpfs -> /run/shm
* devpts -> /dev/pts
* /dev/mmcblk0p1 -> /boot
Error installing the suite: null
java.io.IOException
- com.sun.io.j2me.file.Protocol.connect(), bci=18
- com.sun.io.j2me.file.Protocol.openPrimImpl(), bci=341
- com.sun.io.j2me.file.Protocol.openPrim(), bci=5
- javax.microedition.io.Connector.open(), bci=47
- javax.microedition.io.Connector.open(), bci=3
- com.sun.midp.installer.FileResourceDownloader.downloadResource(), bci=57
- com.sun.midp.installer.ResourceDownloaderBase.downloadToFile(), bci=29
- com.sun.midp.installer.ResourceProvisioning.downloadJar(), bci=59
- com.sun.midp.installer.Installer.installStep7(), bci=11
- com.sun.midp.installer.Installer.performInstall(), bci=167
- com.sun.midp.installer.Installer.installJar(), bci=140
- com.sun.midp.scriptutil.CommandLineInstaller.run(), bci=342
- java.lang.Thread.run(), bci=5
Finishing JavaTask
pi@raspberrypi ~/java_me_3.3/bin $However if I run the AMS CLI (via port 65002) it works using the file:// protocol. CAn it be some kind of permission problem?
--Andy
Similar Messages
-
having problems installing itunes on computer so I can sysc with iphone. had to download only then installed itunes. getting error trying to install AppleMobileDevice64.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Get error trying to install Unmult on AECC 13.2
When I try to copy or move the Unmult effect into either the AE effects folder or the Common/Plug-ins/7.0/MediaCore folder, I get error code 0x80004005.
I tried using both the 32-bit and 64-bit versions and both gave me the same error code. I have a 64-bit system FWIW.
Suggestions?This is the version I downloaded: Red Giant - Products - Knoll Unmult 1.0, 1.1
If that's not the current version, let me know where I can get the current version
Also, I got it installed just fine on my Mac at home. My issue is on my PC at work. -
Getting Error trying to install Cisco Prime Optical 9.6
Good Morning all,
I am having no luck trying to install CPO 9.6. I am trying to install on a Red Hat LINUX 5 machine. Install get to the pre-install checklist then fails on the oracle check, then exits the install. Here is what the error log shows.
Oracle Pre Installation Checks: for Linux
Check Minimum value of RAM allowed to install Oracle
Actual size value of RAM is 48304932 Kb that is sufficient to Install Oracle
Check the correct tmp size for Linux to install Oracle
Actual tmp size is 238785284 Kb that is sufficient to install Oracle
Check the correct oracle base disk size for Linux to install Oracle
Actual disk size for oracle base is 238785292 Kb that is sufficient to install Oracle
Check the correct OS version for Linux to install Oracle
Actual OS Version for Linux is Red Hat Enterprise Linux Server release 5 that is correct
Check the correct OS patches for Linux to install Oracle
Patch list to check: none
End of Oracle Pre Installation Checks for Linux
Oracle Pre Installation Checks: packages for Linux
The package kernel-headers is not installed
The package sysstat is not installed
The package libaio-devel is not installed
CRITICAL: The package gcc is essential
The package gcc-c++ is not installed
The package unixODBC-devel is not installed
The package libstdc++-devel is not installed
The package elfutils-libelf-devel is not installed
The package unixODBC is not installed
The package elfutils-libelf-devel-static is not installed
The package glibc-headers is not installed
End Oracle Pre Installation check of packagesLinux
I have no idea what to do next, any help would be appreciated.
Thanks,
SteveThese instructions were adapted from
http://www.confignotes.com/2011/01/how-to-add-a-repository-manually-in-rhel6/
1. Log in as root.
2. Disable SELinux from the top menu bar at System | Administration | Security Level & Firewall
3. Attach the RHEL load DVD either from the DVD drive or by attaching the iso.
4. Open a terminal.
a. # mkdir /srv/RHEL5_8
b. # cp -rpf /media/RHEL_5.8\ x86_64\ DVD/Server/* /srv/RHEL5_8
/* this takes a while. be patient. */
c. # cp /media/RHEL_5.8\ x86_64\ DVD/RPM-GPG-KEY-redhat-release /srv
/* Remember to eject the DVD, otherwise the system will try to reload RHEL at the next reboot */
5. Create “/etc/yum.repos.d/RHEL_5_8.repo” with the following contents:
[baseOS]
name=Red Hat Enterprise Linux $releasever – $basearch baseOS
baseurl=file:///srv/RHEL5_8
gpgkey= file:///srv/RPM-GPG-KEY-redhat-release
enabled=1
gpgcheck=1
[ScalableFileSystem]
name=Red Hat Enterprise Linux $releasever – $basearch ScalableFileSystem
baseurl=file:///srv/RHEL5_8
gpgkey= file:///srv/RPM-GPG-KEY-redhat-release
enabled=1
gpgcheck=1
[Workstation]
name=Red Hat Enterprise Linux $releasever – $basearch Workstation
baseurl=file:///srv/RHEL5_8
gpgkey= file:///srv/RPM-GPG-KEY-redhat-release
enabled=1
gpgcheck=1
6. Verify it works
a. # yum update
b. should be no errors
7. Update RHEL where <package name> is the name of the desired package.
a. # yum install <package name>
Before CPO can be installed, RHEL must have several packages added. See separate instructions for creating a local update repository on RHEL, then install the packages below.
+ kernel-headers
+ sysstat
+ libaio-devel
+ gcc-c++
- glibc-headers
- libstdc++-develk
+ unixODBC-devel
- unixODBC
+ elfutils-libelf-devel-static
- elfutils-libelf-devel -
This is the messsage i get when trying to install nano 7th Generation........windows found driver software for your device but encountered as error whille attempting to install it .......what do i do help plzs.
How to restart the Apple Mobile Device Service (AMDS) on Windows
-
Hi I get this error trying to install directx 9
Hi I get this error trying to install directx 9 because I need this to run a program that I'm using and it comes up with this error. Please Help. Thanks :)
09-13-2014 00:27 : DTC Install error = 0, Enter MsDtcAdvancedInstaller::Configure, base\wcp\plugins\msdtc\msdtcadvancedinstaller\msdtcadvancedinstaller.cpp (419)
09-13-2014 00:27 : DTC Install error = 0, Action: None, base\wcp\plugins\msdtc\msdtcadvancedinstaller\msdtcadvancedinstaller.cpp (448)
09-13-2014 00:27 : DTC Install error = 0, Entering CreateXATmSecurityKeyCNG, base\wcp\plugins\msdtc\msdtcadvancedinstaller\msdtcadvancedinstaller.cpp (1758)
09-13-2014 00:27 : DTC Install error = 0, Exiting CreateXATmSecurityKeyCNG, base\wcp\plugins\msdtc\msdtcadvancedinstaller\msdtcadvancedinstaller.cpp (1934)
09-13-2014 00:27 : DTC Install error = 0, Exit MsDtcAdvancedInstaller::Configure, base\wcp\plugins\msdtc\msdtcadvancedinstaller\msdtcadvancedinstaller.cpp (506)
09-13-2014 00:45 : DTC Install error = 0, SysPrepDtcCleanup : Enter, com\complus\dtc\dtc\adme\deployment.cpp (1928)
09-13-2014 00:45 : DTC Install error = 0, SysPrepDtcCleanup : Exit, com\complus\dtc\dtc\adme\deployment.cpp (1993)
09-13-2014 00:46 : DTC Install error = 0, SysPrepDtcGeneralize : Enter, com\complus\dtc\dtc\adme\deployment.cpp (1999)
09-13-2014 00:46 : DTC Install error = 0, SysPrepDtcGeneralize : Exit, com\complus\dtc\dtc\adme\deployment.cpp (2070)
11-15-2014 10:03 : DTC Install error = 0, SysPrepDtcSpecialize : Enter, com\complus\dtc\dtc\adme\deployment.cpp (2076)
11-15-2014 10:03 : DTC Install error = 0, InstallContacts, Enter, com\complus\dtc\dtc\adme\deployment.cpp (310)
11-15-2014 10:03 : DTC Install error = 0, InstallContacts, Exit, com\complus\dtc\dtc\adme\deployment.cpp (389)
11-15-2014 10:03 : DTC Install error = 0, SysPrepDtcSpecialize : Exit, com\complus\dtc\dtc\adme\deployment.cpp (2138)From where have you downloaded the installer?
Try from here:
http://www.microsoft.com/en-us/download/details.aspx?id=8109
This is the "redistributable" version of DirectX 9.0c.
S.Sengupta, Windows Entertainment and Connected Home MVP -
I KEEP GETTING ERROR -3 WHEN INSTALLING THEN ERROR -2093 WHEN I TRY TO RUN
I KEEP GETTING ERROR -3 WHEN INSTALLING QUICK TIME, AND THEN WHEN I TRY TO RUN ITUNES I GET ERROR -2093. PLEASE HELP!! I HAVE DELETED AND REINSTALLED THIS MORE THAN 5 TIMES ALREADY! I HAVE AN ACER COMPUTER WITH WINDOWS XP. IF YOU CAN HELP ME PLEASE REPLY OR WRITE ME AT [email protected]
Hi DaFudgeWizzad57392483,
Please refer to the threads below where this issue has been addressed:
1. Installing Creative Cloud-Error 205
2. Creative Cloud Error 205
3. Creative Cloud App, installation error code 205
Regards,
Sheena -
Cannot install IOS 7.0.2 on my ipad 2. Keep getting error message cannot install. Please help
Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem. Then try again. -
When I try to update my iPad 3 4g to iOS 5.1.1, i keep getting error trying to find software update, I've tried several things already, but nothing seems to work.
Perhaps, iTunes can't communicate with the Apple uodate servers. Temporarily disabling your firewall and antivirus software would help. Take a look at this.
Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support -
I get error 1309 when installing a downloaded version of Lightroom 5 trial
I get error 1309 when installing a downloaded version of Lightroom 5 trial
See the following help document:
Error 1321 or 1309 | Install | CS4, CS5, CS5.5 | Windows
http://helpx.adobe.com/creative-suite/kb/error-1321-or-1309-install.html -
Server error when trying to install midlet
Hello
I am trying to install the HelloWorld midlet on my phone (Samsung X105). I am using Tomcat 5.5 as the web server and I am able to connect to my wml page through the phone. The link to the jad file shows up and I get the install prompt when I select it. I then get the connect/download screen. After a while a "Install Error Server Error" message pops up. I have downloaded the J2ME Wireless Kit and run the midlet on there without any errors so I don't think there is anything wrong with the midlet. It seems the file is never downloaded on the phone since the amount of available memory doesn't change. Is this problem related to the server I am using? I was able to download a ringtone from the web so the phone is able to store data. Any help is appreciated.
Thanks,
Mirza1) May be there is a mismatch with the jar file name and the filename in the jad properties ( happens only if you rename the jar file)
2) Check hollywood jad properties and the ringtone jad properties. May be the complete url is required for the jar file.
3) If you are using any restricted APIs in your midlet, then make sure your jad properties has the required permissions. -
Error trying to install ICM 8.0 - "FAILED TO GET SQL SERVER VERSION."
Hello guys, i tried to install ICM 8.0 but when i click on Setup.exe appears this error:
"FAILED TO GET SQL SERVER VERSION. MAKE SURE SQL SERVER INSTALLED PROPERLLY
NO INSTANCE NAME FOUND.NO SCHEMA UPGRADES ATTEMPTED"
I try to check the SQL COnfiguration, about Named Pipes, but everything is allright. Someone knows what is it?
Thank you very much.You should be able to see the ICMSetup.log file somewhere - check TEMP. It seems to me that this is the first thing it does - tries to connect to the SQL database and ask for the version. Clearly it cannot. I assume you installed SQL OK, probably have the service running under a domain user created especially for the task, or the domain admin, and you are also logged in as the domain admin, and that SQL is running.
Check that log file for clues.
Regards,
Geoff -
Getting an error trying to install Crystal Reports 2008 on a 64 bit Windows
reformatted my computer and now I'm trying to install Crystal Reports 2008 on 64 bit windows 7 box. When the "Registering modules" portion of the install comes up, I get a message that a dll has failed to register. I saw something about not having the Microsoft Visual c++ 2005 redistributable pack (x86) installed but that was not it either.
The cd label say Crystal Reports to Crystal Reports 2008 Upgrade, but it does not seem like I have to have the older version of Crystal insatlled.
Any ideas how to fix this ?Hello together,
i've had the same problem. Tried to install CR SP 2 "cr2008win_sp2.exe" onto an existing CR 2008 SP1 installation, and got the above error. After extracting the cr2008win_sp2.exe to an folder using Winzip (or just start Installation, the source would be extracted to "c:\temp" ), navigate to the subfolder "\package" and execute the CrystalReports.msp (in my case: c:\temp\package\CrystalReports.msp). This start's the Installation of SP 2. If you get an version mismatch, use parameter SKIP_PATCH_VERSION_CHECK=1 by typing command in an dos prompt "c:\temp\package\CrystalReports.msp SKIP_PATCH_VERSION_CHECK=1" but remember, you need to have an SP1 installed (somebody said, SP's are incremental).
Reboot and apply then the CR 2008 SP2 FixPack 7 "cr2008fp27.exe". Use this Link to Download CR and Xcelsius Stuff:
[https://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm]
I would suggest you not to use IE for downloading, use an alternative browser. I got only bad downloads (IE8 on Win7).
This is the way i did and this works pretty good.
Good Luck
Matthias -
Error trying to install Win 8.1 x64 Enterprise
Brand new iMac 27", fully loaded, 1 TB SSD, 32 GB RAM, running Mavericks 10.9.3. Trying to install Win 8.1 x64 Enterprise (from MSDN).
Downloaded the ISO file and license and used Boot Camp to install the files and Apple Support files to a 16 GB USB 3.0 thumbdrive.
Used Boot Camp to repartition the 1 TB SSD to set a Windows partion of 256 GB, then the computer rebooted into Windows Setup.
Came to the drives listing, selected the BOOTCAMP parition (Drive 0, Partition 4, 239 GB) and formated it, then clicked on NEXT.
Thought for a while, then it came up with this error message: "We couldn't install Windows in the location you chose. Please check your media drive. Here's more info about what happened: 0x80300002"
Got some hits on Google about issues with VISTA, or with Intel processors, but, nothing specific.
Checked USB thumb drive with Norton, no issues, CHKDSK, no issues.
Have repeated the entire process twice, including restoring the patition and recreating it, and rebuilding the USB Thumbdrive.
Any ideas on what to do?
Thanks!More sadness. I finally started getting the BSOD as soon as Windows booted, and, I could not restart or shutdown the computer...had to power off. That, after a few times, corrupted my BootCamp partition. I messed around with trying to fix, but, no joy.
Redid the partition, checked all drives for errors (fixed permissions on the Mac HD...LOT of errors), and created a new partition.
Used USB 2.0 (VERY SLOW) thumbdrive and had all external drives removed, and installed Win 8.1 Pro, not Enterprise this time.
Got it back up, patched it, configured it, put Norton 360 on it (have on all my computers and iOS devices) shut down, and hooked up the external drives. Booted up and...got the BSOD.
This time I had Windows Debugger loaded, and after the BSOD could reboot, go back intoWindows, and Debug.
Culprit seems to be Norton--in particular a Norton Storage driver. Will be contacting vendor to fix.
Here's dump:
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Dump\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff802`0f87e000 PsLoadedModuleList = 0xfffff802`0fb482d0
Debug session time: Tue Jun 17 00:48:52.131 2014 (UTC - 6:00)
System Uptime: 0 days 0:03:09.864
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd0002852d3e0, ffffd0002852d338, 0}
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Followup: MachineOwner
6: kd> !analyze -v
* Bugcheck Analysis *
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd0002852d3e0, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd0002852d338, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
TRAP_FRAME: ffffd0002852d3e0 -- (.trap 0xffffd0002852d3e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe00059c129f0 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe0005718d2a0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8020f9e8cdb rsp=ffffd0002852d570 rbp=0000000000000000
r8=0000000000005aa0 r9=00000000000007ff r10=ffffd00066cc8000
r11=ffffe00059963040 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe cy
nt! ?? ::FNODOBFM::`string'+0x682b:
fffff802`0f9e8cdb cd29 int 29h
Resetting default scope
EXCEPTION_RECORD: ffffd0002852d338 -- (.exr 0xffffd0002852d338)
ExceptionAddress: fffff8020f9e8cdb (nt! ?? ::FNODOBFM::`string'+0x000000000000682b)
ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
ExceptionFlags: 00000001
NumberParameters: 1
Parameter[0]: 0000000000000003
DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT
BUGCHECK_STR: 0x139
PROCESS_NAME: System
CURRENT_IRQL: 2
ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_PARAMETER1: 0000000000000003
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff8020f9ddae9 to fffff8020f9d1fa0
STACK_TEXT:
ffffd000`2852d0b8 fffff802`0f9ddae9 : 00000000`00000139 00000000`00000003 ffffd000`2852d3e0 ffffd000`2852d338 : nt!KeBugCheckEx
ffffd000`2852d0c0 fffff802`0f9dde10 : ffffe000`59c8cc40 00000000`00000000 ffffe000`54b71040 fffff800`1d6d40b6 : nt!KiBugCheckDispatch+0x69
ffffd000`2852d200 fffff802`0f9dd034 : 00000000`00000000 00000000`00000000 ffff6d2d`50094127 fffff802`0f81458f : nt!KiFastFailDispatch+0xd0
ffffd000`2852d3e0 fffff802`0f9e8cdb : ffffc000`061df4e0 ffffc000`061df4e0 ffffc000`061dfbf8 00000000`00000000 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`2852d570 fffff800`1d7a0be6 : ffffe000`59e10120 fffff800`1d794388 ffffe000`54dfe9c8 fffff800`1d735f7c : nt! ?? ::FNODOBFM::`string'+0x682b
ffffd000`2852d5a0 fffff800`1d7a54e2 : ffffc000`061df4e0 ffffc000`061dfbf8 ffffc000`061df550 fffff800`1d7367ea : SYMDS64+0x71be6
ffffd000`2852d5d0 fffff800`1d737f20 : ffffc000`061df378 ffffc000`061dfbf8 00000000`00000000 ffffc000`05a9bf18 : SYMDS64+0x764e2
ffffd000`2852d620 fffff800`1d73e171 : ffffc000`051e6a88 ffffc000`05a9bf18 ffffc000`05a9bf18 ffffe000`5988cb00 : SYMDS64+0x8f20
ffffd000`2852d650 fffff800`1d782027 : ffffc000`061ea018 00000000`00000000 ffffe000`58409008 fffff800`1d794388 : SYMDS64+0xf171
ffffd000`2852d680 fffff800`1d79af21 : ffffc000`061ea018 ffffd000`2852d8c9 ffffe000`58409008 00000000`10000004 : SYMDS64+0x53027
ffffd000`2852d6c0 fffff800`1d9a3bb3 : ffffe000`58409078 fffff800`1d98b3e8 ffffe000`58409008 ffffd000`2852d8c9 : SYMDS64+0x6bf21
ffffd000`2852d6f0 fffff800`1d9a91fa : ffffe000`5840a1a8 ffffe000`58409008 00000000`00000000 ffffe000`00000000 : SYMEFA64+0xe9bb3
ffffd000`2852d720 fffff800`1d9ae015 : 00000000`00000000 00000000`00000000 ffffd000`2852d8c9 ffffe000`58a10e60 : SYMEFA64+0xef1fa
ffffd000`2852d760 fffff800`1d9adf4c : 00000000`01820201 ffffe000`58a10e60 ffffe000`58a10e60 ffffe000`58a10be0 : SYMEFA64+0xf4015
ffffd000`2852d790 fffff800`1d9b294c : ffffe000`59e0a150 ffffe000`58a10e60 ffffe000`5988ca80 ffffe000`58a10e60 : SYMEFA64+0xf3f4c
ffffd000`2852d7c0 fffff800`1d9a2435 : ffffd000`2852d8a0 ffffe000`599a4010 ffffd000`00000000 ffffe000`59e0a010 : SYMEFA64+0xf894c
ffffd000`2852d7f0 fffff800`1d6d528a : 00000000`00000000 ffffe000`59e0a070 ffffe000`5604e300 ffffe000`58a10e60 : SYMEFA64+0xe8435
ffffd000`2852d820 fffff800`1d71bf76 : ffffd000`2852d960 00000000`00000000 ffffe000`5604f900 ffffe000`571dab10 : fltmgr!FltpPerformPreCallbacks+0x31a
ffffd000`2852d930 fffff800`1d6d413a : ffffe000`57170dd0 ffffe000`571dabd0 ffffe000`59cf18c0 fffff802`0fd411a7 : fltmgr!FltpProcessShutdownRequest+0x122
ffffd000`2852d9b0 fffff802`0fbf7518 : ffffe000`57170dd0 00000000`00000001 ffffe000`571dabd0 fffff802`0fb54a90 : fltmgr!FltpDispatch+0x13a
ffffd000`2852da10 fffff802`0fbf7273 : 00000000`00000001 00000000`00000000 00000000`00000001 00000000`00000000 : nt!IopShutdownBaseFileSystems+0xb8
ffffd000`2852da90 fffff802`0fbfb722 : fffff802`0fbfb4b0 00000000`00000000 ffffe000`59963040 ffffe000`59963040 : nt!IoShutdownSystem+0x127
ffffd000`2852db10 fffff802`0f8d1adb : fffff802`0fbfb4b0 ffffd000`2852dbd0 00000000`00000000 ffffe000`59963040 : nt!PopGracefulShutdown+0x272
ffffd000`2852db50 fffff802`0f94d794 : ffffe000`59965800 ffffe000`59963040 ffffe000`59963040 ffffe000`54b71040 : nt!ExpWorkerThread+0x293
ffffd000`2852dc00 fffff802`0f9d85c6 : ffffd000`66c40180 ffffe000`59963040 ffffe000`59965800 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`2852dc60 00000000`00000000 : ffffd000`2852e000 ffffd000`28528000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMDS64+71be6
fffff800`1d7a0be6 33d2 xor edx,edx
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: SYMDS64+71be6
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMDS64
IMAGE_NAME: SYMDS64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 51f84c44
FAILURE_BUCKET_ID: 0x139_3_SYMDS64+71be6
BUCKET_ID: 0x139_3_SYMDS64+71be6
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x139_3_symds64+71be6
FAILURE_ID_HASH: {bf9be68b-5f04-08d4-3152-3d420dc362f6}
Followup: MachineOwner -
Encountering Java RMI error trying to install IDM 11.1.1.6
Hi all,
I'm completely stumped trying to install Oracle identity management 11.1.1.6 from the download here
http://www.oracle.com/technetwork/middleware/id-mgmt/downloads/index.html
I am on RHEL 5.5 x64, clean install into a Xen VM, all the latest updates applied.
What I have done so far is as follows.
Install GI and DB 11.2.0.3.0 for a single instance using ASM
Set up some ASM disk groups using iSCSI attached storage
Create a database using DBCA
Install RCU 11.1.1.6 and create the necessary repository schema for IDM
Install Sun JDK 1.6.0_38
Install Weblogic server 10.3.6 - downloaded from eDelivery
Carry out a software only installation of IDM
Use $MW_HOME/Oracle_IDM1/common/bin/config.sh to create a Weblogic domain which supports IDM
Run $MW_HOME/Oracle_IDM1/bin/config.sh to try and configure IDM
Sadly at this last step I am encountering an RMI error from the weblogic admin server whien specifying which components I want to configure - the installer is connecting to the running server but I get an RMI exception in the logs, the installer reports INST-5194: Unable to connect to the Oracle WebLogic Middleware Administration Server and it won't go any further. Full error stack follows. Anyone got any suggestions? I'm really scratching my head here.
####<Jan 8, 2013 9:44:12 AM GMT> <Warning> <RMI> <perses> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <c973505a4484734b:-5669ab43:13c160fd34d:-8000-0000000000000019> <1357638252608> <BEA-080003> <RuntimeException thrown by rmi server: javax.management.remote.rmi.RMIConnectionImpl.getAttribute(Ljavax.management.ObjectName;Ljava.lang.String;Ljavax.security.auth.Subject;)
java.lang.NullPointerException.
java.lang.NullPointerException
at java.util.concurrent.ConcurrentHashMap.get(ConcurrentHashMap.java:768)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getMBeanContextLoader(JMXContextInterceptor.java:475)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:146)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5$1.run(JMXConnectorSubjectForwarder.java:326)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1431)
at javax.management.remote.rmi.RMIConnectionImpl.access$300(RMIConnectionImpl.java:74)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1295)
at java.security.AccessController.doPrivileged(Native Method)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1394)
at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:630)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>Did you manage to solve this issue?
I'm running into the exact same error, but installing 11.1.1.7.0 on Windows 2003
Haven't found anything on MOS yet :(
Kind regards,
Rob
Edited by: rgouw on 10-apr-2013 1:10
Maybe you are looking for
-
Boa Tarde Pessoal, Tivemos no ambiente de produção o problema de pulo de numeração da NFe, gostaria de saber se alguém já utilizou o relatório J_1BNFECHECKNUMBERRANGES com sucesso e se existe solução para gerar uma NFe no SAP R/3 com o numero faltant
-
BB Desktop Manager 4.7 has encountered a problem and needs to close.
When I restart my computer, some of the icons in the notification area are missing. The I get the standard "BB Desktop Manager 4.7 has encountered a problem and needs to close" error and my XP machine wants to send an error report to MS.
-
Do the Apple TV units fail?
My Apple TV unit has stopped receiving broadcasts from my Mac. The unit looks like it is on but it doesn't work through my surround sound receiver like it did about 2 weeks ago. It no longer takes a signal from my iPhone either.
-
i was going to play Vortex when the screen just stoped, it says "paused" but it is still zooming out of the menu like it does. this happened to my old 1GB nano when i was playing music. when i connect my ipod my computer just beeps and says there is
-
Setting a transparent background
Is it possible to set a transparent background in Aperture 3? i.e. erase the background of a photo to plane white then setting the transparency for plane white. Attempting to make a transparent background to add the image to a photo. r/ Patrick