Getting Error when creating sales order

Hello expert,
When i ma creating sales order In productive environment, not getting any error.
While creating sales order in Quality system The Error is"Order Type ZSOS has not defined in sales area 0201,02.00.
I checked customizing and both the system Quality and Productive system having following configuration and that is identical.
Combine sales Org
Sales Org                              Ref Sales org
0201                                        Blank
Combine Distribution Channel
Sales Org                 D.Channel            Ref dist Channel
0201                            02                            02
Combine Division
Sales org             Division            Ref Divison
0201                      10                      00
Assign permitted order type to he sales areas.
Ref Sales org         Ref Distribution              Ref Division   Sales doc type
0201                        02                                   00                     ZSOS
Please can anyone assist me where we are missing.
Regards
Ajit jaiswal

Hi Ajit,
you have to make these assignments in img
Combine sales organizations(ova0)
Combine distribution channels(ovam)
Combine divisions(ovan)
Assign sales order types permitted for sales areas(ovaz)
after these assignments the mentionwed error will be resolved
Revert if helpful
Mohit Singh

Similar Messages

Getting error when creat sales order and Stock Posting

Hi
I have created enterprise structure, xd01, mm01, ovkk but I count't post stock.
When create sales order getting error is that
1.This material is not defined for sales area 1000, 10, 00.
And if i use this T.Code MB1C,
2. Parameters for plant 1000 not maintained in Inventory Mgt.,
*3. Unit *** is not created in language EN.*
Thanks in advance

Dear selvi sankaran
1) Compare the sales organization, distribution channel and division of customer and material. In your case, either of that should have been created differently. Maintain the same sales area and retry
2) Go to omi8 and maintain the required parameters to your plant
3) Go to Material Master, select "Additional data" and click on "Descriptions". There maintain "EN" under language.
thanks
G. Lakshmipathi

Dump Error when creating sales order

Dear Friends,
When I am creating sales order after entering order quantity field value in item table giving dump error.
INCLUDE LV03VF0B.
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.

Hello Praveen,
checked this program in other systems.
The weird thing in your code is the final parameter 0, it should not be there.
The call should be:
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX.
Hope it helps.

Error when creating sales order using BAPI_SALESORDER_CREATEFROMDAT2

Hello!
I am using BAPI_SALESORDER_CREATEFROMDAT2 for creating the Sales order. But I have a problem when Iu2019m trying to create configuration. I think that parameter order_items_in-material should be generated before calling BAPI described above. I try to use order_items_in-mat_entrd, but BAPI return error message id = V1, number = 320 (No item category available (Table T184 ZAPC TEXT )).
Help me please, How I can solve this problem?

FUNCTION Z_SD_GET_TEH_COST. "---- " IMPORTING " REFERENCE(IS_COST_ORDER) TYPE ZWCLIF_COST_ORDER " EXPORTING " REFERENCE(EV_KBETR) TYPE KBETR "----

 DEFINE fill_prizn. IF is_cost_order-&1 IS NOT INITIAL. CLEAR: ls_cfgs_value-charc, ls_cfgs_value-value. ls_cfgs_value-charc = &2. ls_cfgs_value-value = is_cost_order-&1. * ls_cfgs_value-valcode = '1'. APPEND ls_cfgs_value TO lt_cfgs_value. ENDIF. END-OF-DEFINITION.
DATA: ls_header_in TYPE bapisdhd1, ls_header_inx TYPE bapisdhd1x,
 lt_partners TYPE TABLE OF bapiparnr, ls_partners TYPE bapiparnr,
 lt_items_in TYPE TABLE OF bapisditm, lt_items_inx TYPE TABLE OF bapisditmx,
 ls_items_in TYPE bapisditm, ls_items_inx TYPE bapisditmx,
 ls_cfgs_ref TYPE bapicucfg, lt_cfgs_ref TYPE TABLE OF bapicucfg,
 lt_cfgs_value TYPE TABLE OF bapicuval, ls_cfgs_value TYPE bapicuval,
 lt_schedules_in TYPE TABLE OF bapischdl, ls_schedules_in TYPE bapischdl,
 lt_schedules_inx TYPE TABLE OF bapischdlx, ls_schedules_inx TYPE bapischdlx,
 lt_cfgs_inst TYPE TABLE OF bapicuins, ls_cfgs_inst TYPE bapicuins, lt_cfgs_partof TYPE TABLE OF bapicuprt, ls_cfgs_partof TYPE bapicuprt,
 lv_vbeln TYPE bapivbeln-vbeln, lt_return TYPE TABLE OF bapiret2.
* fill header ls_header_in-doc_type = 'ZAPC'. ls_header_in-sales_org = is_cost_order-vkorg. ls_header_in-distr_chan = is_cost_order-vtweg. ls_header_in-division = '01'. ls_header_in-sales_off = '1011'.
 ls_header_inx-updateflag = 'I'. ls_header_inx-doc_type = 'X'. ls_header_inx-sales_org = 'X'. ls_header_inx-distr_chan = 'X'. ls_header_inx-division = 'X'. ls_header_inx-sales_off = 'X'.
* fill partners ls_partners-partn_role = 'AG'. ls_partners-partn_numb = '1000000031'. " фиктивный заказчик APPEND ls_partners TO lt_partners.
* ls_items_in-material = is_cost_order-matnr. ls_items_in-mat_entrd = is_cost_order-matnr. ls_items_in-target_qty = '1'. ls_items_in-itm_number = '000001'. ls_items_in-po_itm_no = '000001'. ls_items_in-item_categ = 'ZCRM'. SELECT SINGLE meins INTO ls_items_in-target_qu FROM mara WHERE matnr = is_cost_order-matnr. APPEND ls_items_in TO lt_items_in.
 ls_items_inx-itm_number = '000001'. ls_items_inx-item_categ = 'X'. ls_items_inx-po_itm_no = 'X'. * ls_items_inx-material = 'X'. ls_items_inx-mat_entrd = 'X'. ls_items_inx-target_qty = 'X'. ls_items_inx-target_qu = 'X'. ls_items_inx-updateflag = 'I'. APPEND ls_items_inx TO lt_items_inx.
* fill configuration ls_cfgs_ref-posex = '000001'. ls_cfgs_ref-config_id = '000001'. ls_cfgs_ref-root_id = '00000001'. APPEND ls_cfgs_ref TO lt_cfgs_ref.
 ls_cfgs_value-config_id = '000001'. ls_cfgs_value-inst_id = '00000001'.
 fill_prizn kod_prod 'KOD_PROD'. fill_prizn tlot_min 'TLOT_MIN'. fill_prizn tlot_max 'TLOT_MAX'. fill_prizn shot_min 'SHOT_MIN'. fill_prizn shot_max 'SHOT_MAX'. fill_prizn dlot_min 'DLOT_MIN'. fill_prizn dlot_max 'DLOT_MAX'. fill_prizn marka 'MARKA'. fill_prizn stndrt_marka 'STNDRT_MARKA'. fill_prizn stndrt_prod 'STNDRT_PROD'. fill_prizn tprk 'TPRK'. fill_prizn grot 'GROT'. fill_prizn vityazhka 'VITYAZHKA'. fill_prizn krom 'KROM'. fill_prizn chisl_st_pokr 'CHISL_ST_POKR'. fill_prizn kls_tol_pokr 'KLS_TOL_POKR'. fill_prizn proch_izg_t_lic_max 'PROCH_IZG_T_LIC_MAX'. fill_prizn priz_zasch_pov 'PRIZ_ZASCH_POV'. fill_prizn vid_pokr 'VID_POKR'. fill_prizn mark_pokr 'MARK_POKR'. fill_prizn mat_pokr_lic 'MAT_POKR_LIC'. fill_prizn plsk 'PLSK'. fill_prizn vid_postavki 'VID_POSTAVKI'. fill_prizn dressir 'DRESSIR'. fill_prizn travl 'TRAVL'. fill_prizn fsfr_min 'FSFR_MIN'. fill_prizn fsfr_max 'FSFR_MAX'. fill_prizn krmn_min 'KRMN_MIN'. fill_prizn krmn_max 'KRMN_MAX'. fill_prizn mrgn_min 'MRGN_MIN'. fill_prizn mrgn_max 'MRGN_MAX'. fill_prizn almn_min 'ALMN_MIN'. fill_prizn almn_max 'ALMN_MAX'. fill_prizn cugl_min 'CUGL_MIN'. fill_prizn cugl_max 'CUGL_MAX'.
 ls_schedules_in-itm_number = '000001'. * ls_schedules_in-req_date = sy-datum. ls_schedules_in-sched_line = '0001'. ls_schedules_in-req_qty = '1'. APPEND ls_schedules_in TO lt_schedules_in.
 ls_schedules_inx-itm_number = '000001'. ls_schedules_inx-sched_line = '0001'. * ls_schedules_inx-req_date = 'X'. ls_schedules_inx-req_qty = 'X'. ls_schedules_inx-updateflag = 'I'. APPEND ls_schedules_inx TO lt_schedules_inx.
 ls_cfgs_partof-parent_id = '00000001'. ls_cfgs_partof-inst_id = '00000001'. ls_cfgs_partof-class_type = '300'. ls_cfgs_partof-obj_type = 'MARA'. ls_cfgs_partof-obj_key = is_cost_order-matnr. APPEND ls_cfgs_partof TO lt_cfgs_partof.
 ls_cfgs_inst-config_id = '000001'. ls_cfgs_inst-inst_id = '00000001'. ls_cfgs_inst-obj_type = 'MARA'. ls_cfgs_inst-class_type = '300'. ls_cfgs_inst-obj_key = is_cost_order-matnr. APPEND ls_cfgs_inst TO lt_cfgs_inst.
 CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' EXPORTING order_header_in = ls_header_in order_header_inx = ls_header_inx * testrun = IMPORTING salesdocument = lv_vbeln TABLES return = lt_return order_items_in = lt_items_in order_items_inx = lt_items_inx order_partners = lt_partners order_schedules_in = lt_schedules_in order_schedules_inx = lt_schedules_inx order_cfgs_ref = lt_cfgs_ref order_cfgs_inst = lt_cfgs_inst order_cfgs_part_of = lt_cfgs_partof order_cfgs_value = lt_cfgs_value .
 READ TABLE lt_return TRANSPORTING NO FIELDS WITH KEY type = 'E'. IF sy-subrc = 0. CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK' . ELSE. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X' . ENDIF.
ENDFUNCTION.

Order, Rounded & Confirmed qty all gets populated when creating Sales Order

Hello Experts,
I'm creating a number of sales orders for custom materials (1400-510-01, 1400-510-02, 1400-510-03). Under Schedule lines I've observed Order and Rounder qty reflects the 5, which i provided for Quantity for this material. However Confirmed qty also gets per-populated with 5 and its locked. This is causing then I try to create Transfer Order. Does anybody will know why Confirmed qty also getting populated beside Order and Rounder qty. If yes then how i can get ride of it.
Many thanks in advance.

Hi,
The confirmed quantity is based on the available quantity in the stock which is confirmed based on the order quantity. This will only change if
1) there is not sufficient stock
2) if its partially confirmed and confirmed in future in full

Error when creating sales order

Hi Gurus,
Please help me resolve the below error.
"Invalid combination of Business Area and Mat.Acc.Det.Group 01"
Thank You
Kumar

RESOLVED MYSELF

Error while create sales order

Hi,
Please help.
I am facing error while create sales order.
No item category available (Table T184 OR VERP )
Message no. V1320
Diagnosis
No item category could be determined for the combination OR VERP .
System Response
The system does not allow further processing of this item.
Procedure
Check the entries in table T184 by means of which item category determination is controlled.
If you do not have the authorization to do this yourself, contact your system administrator.

Hi,
Check in spro whether Item categorygroup VERP is assigned to sales document type.if not assign.
Path
SPRO-SD-sales-sales douments-sales document item-assign item categories.

User Exit/Badi to change the billing plan date when create sale order

Experts,
Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

Hi,
check the include MV45AFZB.
Thanks & Regards,
Sateesh.

How to save LIST_LINE_ID of Price List when create Sales Order Line

I dont know how save the LIST_LINE_ID of the Price List on Sales Order or anywhere when create Sales Order Line.
I create with the following steps:
Step 1: Create Price List for Item A with two line: Line 1 (Unit Price = 10,5, Pricing Attribute with Tax Classification Code = 5%), Line 2 (Unit Price = 11, Pricing Attribute with Tax Classification Code = 10%)
Step 2: I create Sales Order Line with Item A, Tax Classification Code = 5% --> Unit Selling Price = List Price = 10,5 but dont bookorder
Step 3: I update the Unit Price of Line 1 into 11.55.
Step4 : I book this Sales Order. Howerver, I use form personalization to customize Book Event: if the Unit Price of Item on Price List > Unit Selling Price then cant not Book. But I dont konw List Price of Sales Order belong the line of Price List.
Please help me check this issue. Thanks for your supports.
BinhTC
Email: [email protected]

Bob's right - except that if you have OM: List Price Override Privilege set to 'Unlimited' (and from your scenario it sounds as if you have) it is possible that the value in unit_list_price will vary from what was originally retrieved from the price list.
In that case, a safer bet is to use :LINE.original_list_price in your personalization as this will always contain what was originally retrieved and will mean you can avoid any repeat lookup via list_line_id.
Regards,
Jon

To Blank out system default requested delivery date when create Sales Order

Hi Experts,
I am facing a problem when create Sales Order doc copy with reference to a contract.
The create with reference screen under the Contract tab, SAP default with current date as the Requested delivery date.
Is there any way to blank out this default as I need to use the requested delivery data in the contract doc ?
Many Thanks.
Regards,
Xavier

Hi,
Try this--
While defining the Contract sales docment type in VOV8, uncheck the proposed delivery date field in the tab Requested delivery date/ reqested pricing date/reqested prchase order date
I will not propose the system date and leaves the field blank
you can enter the required delivery date.
Hope this will work
regards,
santosh

Error: Object type '' could not be generated when creating sales order

Hello Friends,
I am using a SAP standard ITS service to create sales order.
When I am creatin SO, it gives me error Object type '' could not be generated.
Can you plz suggest me what is that issue & how I can reslove it.
Regards,
Narendra

any inputs around this plz??

Error while creating Sales Order Through BAPI

Hi Friends,
i am creating a RFC where i have to create sales order .
I am using bapi
BAPI_SALESORDER_CREATEFROMDAT2
for same and entering values to it.
I got the following return messages:
S V4                   233 SALES_HEADER_IN has been processed successfully
S V4                   233 SALES_ITEM_IN has been processed successfully
S V1                   311 BDN Order 3112800903 has been saved
But when I go to transaction VA03 and enter the number i get the following error:
SD document 3112800903 is not in the database or has been archived
Can any one know how to resolve this error.I am also using BAPI_TRANSACTION_COMMIT with wait = 'X'.
Regards,
Santosh Alle

Hi,
Try to check the return message once.
SD document 3112800903 is not in the database or has been archived
You will get this message if the sales document is deleted from the database .The BAPI   'BAPI_SALESORDER_CHANGE' is used to delete salesorder.Check whether anyone has deleted it
Also, sometimes it may take few seconds to update the sales order in the database when using BAPI. Check the transaction after some time.
Regards,
Lakshman.
Edited by: Lakshman N on May 14, 2010 7:43 AM

Error while creating sales order with ref using SD_SALESDOCUMENT_CREATE

Hi
I am creating sales order with reference using function module SD_SALESDOCUMENT_CREATE , while creating i am getting error
Document doesn't have document category even thougth i am passing document category in header as well as item lavel.
In VBUK table there is no value for VGTYP.
Can you please help me how to resolve it.
Thanks & regards
kiran

Problem resolved by passing REFDOC_CAT in the FM along with SD_DOC_CAT.
Thanks

Error while creating sales order using SD_SALESDOCUMENT_CREATE

Hello All,
We are using to SD_SALESDOCUMENT_CREATE function module to create sales order it is working fine for single material.
When we try to create sales order with multiple matearials we ended up with the following errors
SALES_HEADER_IN has been processed successfully
000000
VBAKKOM
Internal error in communication between configuration and sales doc.CONFIGURATION_PROCESSING
000000
CONFIGURATION_PROCESSING
Error in SALES_ITEM_IN 000010
000000
VBAPKOM
Internal error in communication between configuration and sales doc.CONFIGURATION_PROCESSING
000000
CONFIGURATION_PROCESSING
Error in SALES_ITEM_IN 000020
000000
VBAPKOM
SALES_ITEM_IN has been processed successfully
000000
VBAPKOM
Could any one help me out to resolve this issue.
Thanks in advance....
Cheers,
Harsha

Hello,
Looking at BAPI errors. It looks like you are trying to create sales order with variant configuration.
Check Below SAP Note.
900380 - Configurable items in the SD process (idocs & bapis)
Regards,
Sameer

Hi error while creating sales order

hi
i am getting 'not able to save' message while i am creating sales order.
how should i proceed to know where is the problem???
i tried debugging but it is taking lots of time, is there any other way i can know the reason for this error in standard code.
there is no wrong data entry while creating sales order.
i just want to know what are the ways to know where is the problem in the standard code.
thanx
rocky

hi ,
try too create a sales order after that check transaction code ST22 U WILL FIND AN SHORT DUMP then check in the source code extract an pointer will be visible where the error is coming and it will also show the program name , please read the dump analysis care fully
srinivas

Getting Error when creating sales order

Similar Messages

Maybe you are looking for