Getting events into WLI from External JMS Queue

Hi,
I can't figure out how to get an event into WLI from an external JMS queue.
I can send an XML message to an external queue but can't figure out how to get
a message from an external queue into WLI. I have created the MDB using the generator
program provided and have deployed. How does this MDB now send these messages
into WLI?
I have also posted this same question in weblogic.interest.jms newsgroup.
-- Bill

Hi Bill.
Actually this is really simple. Here are the steps:
Connect your MDB to the external JMS queue by modifying the weblogic-ejb-jar.xml
The MDB onMessage(Message m) method will receive a message from the external JMS
queue. It will then use JNDI to bind to the EventQueue of WLI and submit the event
as XML into that queue.
Obvously the onMessage() operation must be transacted using container managed
transactions so the scope will spawn both de-queuing from the external JMS queue
and enqueing into the WLI Evnet Queue.
"Bill Ozeroff" <[email protected]> wrote:
>
Hi,
I can't figure out how to get an event into WLI from an external JMS
queue.
I can send an XML message to an external queue but can't figure out how
to get
a message from an external queue into WLI. I have created the MDB using
the generator
program provided and have deployed. How does this MDB now send these
messages
into WLI?
I have also posted this same question in weblogic.interest.jms newsgroup.
-- Bill

Similar Messages

How to send BusinessEvent from oracle EBS 12 to an external JMS Queue/Topic

Hello Sir:
How to send BusinessEvent from oracle EBS 12 to an external JMS Queue/Topic??
How to receive BusinessEvent from an external JMS Queue/Topic to oracle EBS 12 ??
It is a Third Party JMS Server, it has queue and topic etc??
which module should be used??
what is the basic steps to do??
Thanks

swapnil_yeole wrote:
Hello,
We want to install Oracle EBS 12.1.1.
Our internet speed is very poor so it would not be feasible for us to download the software from E-delivery site.
Can you please let me know how & where to obtain Oracle EBS 12.1.1 DVD's.
Do we need to raise an SR with Oracle for same.
Thanks in advance.
Yes -- https://blogs.oracle.com/stevenChan/entry/how_to_obtain_media_packs
Thanks,
Hussein

Connect from Weblogic JMS queue to SAP WAS JMS queue

Hi,
I am trying to setup a WLS 8.1 messaging bridge between a weblogic JMS queue and a SAP WAS JMS queue. I have configured a queue on both Weblogic and SAP WAS and I have set up the messaging bridge and bridge destintations in weblogic. However when weblogic tries to get the SAP initial context factory it fails with the error below.
I have added the SAP Client jars to the weblogic system classpath, and in the weblogic startup script but it still fails. Has anyone connected from an external JMS queue to a SAP WAS JMS queue that could provide me with some guidence?
<10/08/2006 08:23:45 AM WST> <Warning> <Connector> <BEA-190032> << Weblogic Mess
aging Bridge Adapter (XA)_eis/jms/WLSConnectionFactoryJNDIXA > ResourceAllocatio
nException of javax.resource.ResourceException: ConnectionFactory: failed to get
initial context (InitialContextFactory =com.sap.engine.services.jndi.InitialCon
textFactoryImpl, url = ux0800:55304, user name = username) on createManagedConnectio
n.>
Thanks
Warren

Stoyan,
Thanks for that.
My problem ended up being a classpath problem. I referenced the directory of the SAP jars in the weblogic start up script. When I changed this to reference each jar individually it worked.
I have a new issue now which may have something to do with security. The trace suggests it is logging on as the guest user, even though I entered my username and password in the Messaging bridge.
#1.5#000E7FED310600A30000008A0000302D00041AA399E338B4#1155189870559#com.sap.jms##com.sap.jms.server.sessioncontainer.InboundBus instance=BWIP#J2EE_GUEST#0####165536f0283611db8903000e7fed3106#SAPEngine_Application_Thread[impl:3]_126##0#0#Error##Plain###com.sap.jms.server.exception.JMSServerInvalidDestinationException: No destination with ID=0 found.
        at com.sap.jms.server.service.impl.RegistryServiceImpl.getDestinationContext(RegistryServiceImpl.java:404)
        at com.sap.jms.server.sessioncontainer.InboundBus.getDestinationContext(InboundBus.java:98)
        at com.sap.jms.server.sessioncontainer.InboundBus.process(InboundBus.java:153)
        at com.sap.jms.server.sessioncontainer.InboundBus.enqueue(InboundBus.java:116)
        at com.sap.jms.server.sessioncontainer.SessionContainer.receiveFromDispatcher(SessionContainer.java:63)
        at com.sap.jms.server.routingcontainer.RoutingContainer.receiveFromDispatcher(RoutingContainer.java:447)
        at com.sap.jms.server.JMSServerContainer.dispatchRequest(JMSServerContainer.java:635)
        at com.sap.jms.server.JMSServerFrame.request(JMSServerFrame.java:536)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Warren

B2B 11g - Managing File name from a JMS queue.

Hi,
I have configured a Listening Channel to use Generic File 1.0 (to poll a file from local dir) and send it to a Trading Partner. In B2B User Guide it has been said to have the file name as %TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%_%MESSAGE_ID%_TIMESTAMP.txt. Extension can be anything (txt, dat, etc).
It is necessary to have this format? What if I want to send a file with name say ABC.txt*.
How will I manage this file name pattern if I have to read the file content from a JMS queue (and then send the file to the Trading Partner).
Thanks,
Sanjay
Edited by: Sanjay Bharatiya on 24-Nov-2010 12:07 PM

Hi Anuj,
I set up AS2 in my local environment and tested it. I do not get the desired name of the file. The wire message seems to be ok. Following is the Tranport Header present in the wire message from the sender B2B server:
Message-ID=<ID:<172014.1291742389684.0>@kg_certificate> Content-Transfer-Encoding=binary MIME-version=1.0 From=kg_certificate Disposition-Notification-To=[email protected] AS2-To=exel_certificate User-Agent=AS2 Server Date=Tue, 07 Dec 2010 17:19:50 GMT AS2-Version=1.1 AS2-From=kg_certificate Content-Disposition=attachment; filename=J7Q9A7.txt Content-Type=*application/octet-stream*
Following is the Transport Header present in the wire message from the receiver B2B server:
AS2-To=exel_certificate TE=trailers, deflate, gzip, compress Date=Tue, 07 Dec 2010 17:19:50 GMT AS2-Version=1.1 Accept-Encoding=gzip, x-gzip, compress, x-compress AS2-From=kg_certificate Content-Transfer-Encoding=binary Disposition-Notification-To=[email protected] Message-ID=<ID:<172014.1291742389684.0>@kg_certificate> Content-type=application/octet-stream MSG_RECEIVED_TIME=Tue Dec 07 12:20:39 EST 2010 ECID-Context=1.0000In1qASoEoI05nzp2iZ1Cxam9001KGU;kXCmv0 MIME-version=1.0 User-Agent=AS2 Server Oracle HTTPClient Version 10h Content-Disposition=attachment; filename=J7Q9A7.txt Content-Length=211 Host=10.32.200.207:8001 Connection=Keep-Alive, TE From=kg_certificate
Things look good here but when the file is written to a directory the file name is of the form <sendername>_<doctypename>_<docrevision>_<msgtype>_*****.dat. I do not get the desired file name (J7Q9A7.txt). What am I missing?
Thanks,
Sanjay
Edited by: Sanjay Bharatiya on 7-Dec-2010 11:59 AM

How to pick(or consume) messages from Woblogic JMS Queue only when DB is UP

Hi,
I have a requirement to pick(or consume) messages from Woblogic JMS Queue only when DB is UP.
When DB is down, messages should remain in queue. When DB is up, messaged should be picked on scheduler basis.
We are using SOA suite 11g(BPEL or mediator,JMS Adapter).
What is the best way to achive it in SOA 11g.
I tried, but when I setup a Consumer, there is no control over there. Messages are picked automatically.
Please advise.
Thanks
Ram

something wrong with the design.
why dont you set the retry options in the fault policies?
So if the external DB is down you could reprocess them after specified interval or make it go to human retry queue.
Then you could use SOA api to retry all of them.
--Prasanna

Problem parsing TextMessage from a JMS queue

I'm attempting to read and parse a TextMessage from a JMS queue. The message is in an XML format and I'm trying to parse it using "oraext:parseXML". If I hardcode a value such as:
<copy>
<from expression="'<ns:person xmlns:ns="urn:mynamespace"><ns:personname><ns:first>bob</ns:first></ns:personname></ns:person>'"/>
<to variable="tempString"/>
</copy>
I can then parse "tempString" just fine. If I read the TextMessage in as a string and attempt the same thing, I constantly get
"XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is oraext:parseXML(bpws:getVariableData('tempString')). The XPath expression failed to execute; the reason was: internal xpath error. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. "
If I look at "tempString" in both scenarios (hardcoding the value and reading it in) the contents are basically the same, when reading it in via the JMS queue it does seem to put in line breaks after the elements to format it more like an XML document. For example, coming in from JMS the string looks like:
<ns:person>
<ns:personname>
<ns:first>bob</ns:first>
</ns:personname>
</ns:person>
But hardcoding the value it looks like:
<ns:person><ns:personname><ns:first>bob</ns:first></ns:personname></ns:person>
Should this affect anything?
Thanks.

Thanks for the reply. I'm not sure I understand the difference between XML and an XML string. XML is just a well-formed text string, right?
Anyway, your suggestion didn't work for me. The "ora:getContentAsString" call you suggested apparently strips away the XML and gives just the contents. For example, given the XML:
<ns:person>
<ns:personname>
<ns:first>bob</ns:first>
<ns:last>smith</ns:last>
</ns:personname>
</ns:person>
"ora:getContentAsString" yields: "bobsmith", not the data structure.
Again, thanks for the reply.

How can SAP XI JMS Queue communicate with external JMS Queue

Dear All ,
we are Implementing SAP XI . Sender business system is splitting a file into small files and keeping them into JMS queues we want SAP XI JMS queue should communicate directly with the sender JMS queue (which is an external JMS queue) without any Adapter ,programming efforts and Middleware.
Can you please tell me is it possible?

I dont think it is possible directly without adapter

Message Driven Bean reading multiple times from a jms queue

Hi,
I am facing a strange problem with my message driven bean. Its configured to read message from a jms queue. But sometimes it read the same message multiple times from the jms queue.
We are using weblogic server 8.1 sp5.
Please find below our descriptor files
ejb-jar.xml
<ejb-jar>
<display-name>ClarifyCRM_Process_Manager_13.1</display-name>
<enterprise-beans>
    <session>
      <display-name>ProcessManager</display-name>
      <ejb-name>ProcessManager</ejb-name>
      <home>com.clarify.procmgr.ejb.ProcessManagerHome</home>
      <remote>com.clarify.procmgr.ejb.ProcessManagerRemote</remote>
      <ejb-class>com.clarify.procmgr.ejb.ProcessManagerEJB</ejb-class>
      <session-type>Stateless</session-type>
      <transaction-type>Container</transaction-type>
    </session>
    <message-driven>
      <display-name>ProcessManagerListener</display-name>
      <ejb-name>ProcessManagerListener</ejb-name>
      <ejb-class>com.clarify.procmgr.ejb.ProcessManagerMDB</ejb-class>
      <transaction-type>Bean</transaction-type>
      <acknowledge-mode>Auto-acknowledge</acknowledge-mode>
      <message-driven-destination>
        <destination-type>javax.jms.Queue</destination-type>
      </message-driven-destination>
    </message-driven>
</enterprise-beans>
<assembly-descriptor>
    <container-transaction>
      <method>
        <ejb-name>ProcessManager</ejb-name>
        <method-name>*</method-name>
      </method>
      <trans-attribute>Required</trans-attribute>
    </container-transaction>
</assembly-descriptor>
</ejb-jar>
weblogic-ejb-jar.xml
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
    <ejb-name>ProcessManager</ejb-name>
    <stateless-session-descriptor>
      <pool>
        <max-beans-in-free-pool>100</max-beans-in-free-pool>
        <initial-beans-in-free-pool>10</initial-beans-in-free-pool>
      </pool>
    </stateless-session-descriptor>
    <enable-call-by-reference>False</enable-call-by-reference>
    <jndi-name>ProcessManagerHome</jndi-name>
    <dispatch-policy>PMExecuteQueue</dispatch-policy>
    <remote-client-timeout>0</remote-client-timeout>
</weblogic-enterprise-bean>
<weblogic-enterprise-bean>
    <ejb-name>ProcessManagerListener</ejb-name>
    <message-driven-descriptor>
      <pool>
        <max-beans-in-free-pool>100</max-beans-in-free-pool>
        <initial-beans-in-free-pool>10</initial-beans-in-free-pool>
      </pool>
      <destination-jndi-name>clarify.procmgr.jms.queue.Execution</destination-jndi-name>
      <connection-factory-jndi-name>clarify.procmgr.jms.factories.ExecConnection</connection-factory-jndi-name>
    </message-driven-descriptor>
    <enable-call-by-reference>True</enable-call-by-reference>
    <dispatch-policy>PMListenerExecuteQueue</dispatch-policy>
    <remote-client-timeout>0</remote-client-timeout>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>   The MDB is sometimes reading multiple times from clarify.procmgr.jms.queue.Execution
Also i would like to add here that the connection factory we are using clarify.procmgr.jms.factories.ExecConnection is having the following properties
ServerAffinity Enabled=true
XA connection factory enabled=false.
Please help me out here!!

Maybe, your MDB "sometimes" throws an Exception in onMessage.
Check if this happens when you set <max-beans-in-free-pool>1</max-beans-in-free-pool>.

TS3720 I have updated to Mac OS X v10.6.7 and STILL cannot get video into iMovie from Sony HDR SR11 :-( PLEASE HELP ME ...

I have updated to Mac OS X v10.6.7 and STILL cannot get video into iMovie from Sony HDR SR11 :-( PLEASE HELP ME ...

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

WLST: how to move messages from a JMS queue to another queue

Hi all,
I'm looking for an example for moving messages from a JMS queue to another JMS queue using WLST.
Do you have an example about that or a piece of code as starting point ?
Thanks in advance
ferp

http://www.javamonamour.org/2011/09/wlst-move-jms-messages.html

Get Message Notification in BPM 10G from External JMS Provider

Hello,
Can anyone provide me the steps how to get a message from the queue (external JMS provider) in BPM 10G.
I have been looking into this for couple of days now and I'm not able to figure it out. Any input on this would be greatly appreciated.
Thanks
NC

Hi,
Please find the steps below and change the necessary parameter according to your requirement.
JMS Configuration and read the message from queue a
1) Configure a J2EE Configuration in External Resources with the following details.
Where
Name: J2EEConfiguration
Initial Context Factory: weblogic.jndi.WLInitialContextFactory
URL: t3://localhost:7001
Principal: weblogic
Credentials: weblogic
2) Configure a JMS Configuration in External Resources with the following details
Where
Name: JMSConfiguration
J2EE: J2EEConfiguration
Destination Type: Queue
Lookup Name: com.bibhu.queue – Refer to JMS configuration in Weblogic Server
Connection Factory Lookup Name: com.bibhu.cf – Refer to JMS configuration
3) Configure a Java Configuration in External Resources with the following details
Add weblogic.jar, wsclient.jar, and jms.jar files
4) Create a process and add a Global automatic Activity with the following configuration
5) Add the following code for different purpose
// The below code is meant for reading a message/messages from Queue
logMessage("JMS message retrieved from queue: \n" + message.textValue);
// The below code is meant for sending message to the Queue Where,
// JMSConfiguration: is the External Resource Configuration for JMS
// Bibhu: is the message body
String externalResourceId = "JMSConfiguration";
String msgBody = "Bibhu";
JmsMessage jmsMsg = JmsMessage(type : JmsMessageType.TEXT);
jmsMsg.textValue = msgBody;
jmsMsg.expiration = 'now' + '5m'; // expires in 5 minutes
sendMessage(DynamicJMS, configuration : externalResourceId, message : jmsMsg);
hope the above will help you.
Bibhu

How to keep a back up of messages from the JMS queues?

Hi,
I need to keep a back up of messages which are coming in the JMS queue before they get consumed. This is for recovery purpose.
I checked file store option but it doesnt have any time stamp on messages so dont know how to trace back messges if needed from file store.
Please let me know if you guys have any idea to handle this.
Thanks in advance
Bips

No. Not with Time Machine at least.
If you tell Time Machine to backup the external then you will have it.
Or you can manually copy it to another disk for storage outside of Time Capsule/TimeMachine.
Allan

Help with getting Events into a Project please

I apologize if this topics been covered here or somewhere else on the Apple website(s), but I cannot get my Events into a Project in iMovie. I've read the directions, watched the videos, and looked at these pages but can't seem to find an answer. At this point, all I want to do is download video from my camcorder to save it and edit later (when I have more time). I managed to download video from several events from the flash drive on my Canon Vixia HF11 and it appears in the Events library. I can play it and select clips without difficulty. I tried to select all the Events (all together and separately) to move to a project (after opening a new project), but the cursor bounces back. It will allow me to select clips but this is very cumbersome and time consuming and I don't want to edit now - I want to save all the video. The "add to project" button doesn't work. Am I missing something? There must be some way to select ALL the video in all the Events I've downloaded to put into one project. BTW, we're only talking about 40 minutes of video. If possible, please post screen shots so that I can see exactly what to do. Any help is much appreciated.

DocRock54 wrote:
.. to select ALL the video in all the Events I've downloaded to put into one project. ..
no, not avail.
and 'off'-concept of that tiny edit-app:
when you import, you create a Library of all footage.
iM will split these videos (by date) into seperate 'Folders' = Events.
the idea of iM is, to offer you this Library to create a SELECTION of it for any given Project. there are very rare cases I can imagine, you add ALL material of one Event into one Project (in the Event Window hit apple-a), even a Lecture allows to edit here&there.
but adding all material from any imports into one Project? no. no need = no feature.

Reading Message from Foreign JMS Queue in SOA Suite 11g.

Hi,
I am trying to read a JMS message that has been put into a JMS Queue on a remote weblogic Server.
The steps that I know is that I need to create a foreign JMS Server and then probably use JMS Adapter to subscribe to the message that is lying in the remote queue.
Has anybody been able to achieve this kind of scenario working for a remote JMS queue? Also, is this supported by JMS Adapter in SOA11g?
Any help will be appreciated.
Regards,
Varun Maheshwari

Hi Atheek1,
Thanks for your reply.
The confusion that is pondering me is that do I need to create a Foreign JMS Server or should I create a JMS adapter and override the properties.
I have tried the steps for creating a Foreign Server from the below link
Unable to access remote JMS Queue through JMS Adapter
But I am not able to find the Foreign Server created and any connection factories and Destinations related to foreign Server in my JMS Destination while configuring JMS Adapter.
I am not sure how to do step2 as entailed by you.
Could you please explain me in little detail on how to do this or redirect me to some blog or forum which will be really helpful.
Cheers,
Varun

Aggregation via BPM from different JMS queue

Hi there,
my query is about, I need to get the messages from three different JMS queue (say 3 different interface) based on some indicator flag (say 'X') in the payload from first two queue I need to persist / hold the messages with in PI (not sure about persisting) else pass through and after receiving the message from third queue I need correlate from the persisted message based on the groupID then consolidate and pass through to ECC.
how this can be achieved in PO version on 7.31.
Regards,
Sethu.

Hello,
My cents Enterprise Patterns in Process Orchestration – Aggregator
I hope it help you.
regards,
Roberto.

Getting events into WLI from External JMS Queue

Similar Messages

Maybe you are looking for