How to keep a back up of messages from the JMS queues?

Hi,
I need to keep a back up of messages which are coming in the JMS queue before they get consumed. This is for recovery purpose.
I checked file store option but it doesnt have any time stamp on messages so dont know how to trace back messges if needed from file store.
Please let me know if you guys have any idea to handle this.
Thanks in advance
Bips

No. Not with Time Machine at least.
If you tell Time Machine to backup the external then you will have it.
Or you can manually copy it to another disk for storage outside of Time Capsule/TimeMachine.
Allan

Similar Messages

How to read the messages in the JMS Queue using JMX

Hi,
          I want to read messages in the JMS queue using JMX. I was able to read using QueueBrowser but want to modify priority of the messages using JMX.
          I tried to use JMSDestinationRuntimeMBean but it does not allow us to read messages unless we pass the message Id. Is there any way that I can get all the messages in the queue.
          I am using Weblogic 8.1 SP4
          Can someone please help me in this regard.
          Thanks,
          Kiran.
          Edited by KGudipati at 10/22/2007 1:22 AM

Hi,
As far as i know, JMS Object Messages is not supported by XI JMS adapter.
you need to have the JMS provider to transform the message to bytes messages.
(Refer to SAP note 856346)

How to pick(or consume) messages from Woblogic JMS Queue only when DB is UP

Hi,
I have a requirement to pick(or consume) messages from Woblogic JMS Queue only when DB is UP.
When DB is down, messages should remain in queue. When DB is up, messaged should be picked on scheduler basis.
We are using SOA suite 11g(BPEL or mediator,JMS Adapter).
What is the best way to achive it in SOA 11g.
I tried, but when I setup a Consumer, there is no control over there. Messages are picked automatically.
Please advise.
Thanks
Ram

something wrong with the design.
why dont you set the retry options in the fault policies?
So if the external DB is down you could reprocess them after specified interval or make it go to human retry queue.
Then you could use SOA api to retry all of them.
--Prasanna

WLST: how to move messages from a JMS queue to another queue

Hi all,
I'm looking for an example for moving messages from a JMS queue to another JMS queue using WLST.
Do you have an example about that or a piece of code as starting point ?
Thanks in advance
ferp

http://www.javamonamour.org/2011/09/wlst-move-jms-messages.html

Java - Axis2: How to get an error code / error message from the Javascript via SOAP

Hi
In our Java applicsation we call a Javascript in a Indesign CS Server using the following code:
--- SNIP BEGIN ---
// calls the remote service on the indesign server
try {
// create service
ServiceStub oIndsgnSrvStub = new
ServiceStub(sIndesignServer);
// create service parameter
ServiceStub.RunScriptParameters
oIndsgnSrvRSParams = new ServiceStub.RunScriptParameters();
// create arguments with source- and target-file for parameter
ServiceStub.IDSPScriptArg[] oIndsgnSrvSArgs = new ServiceStub.IDSPScriptArg[2];
oIndsgnSrvSArgs[0] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[0].setName("xml-input");
oIndsgnSrvSArgs[0].setValue(sSourceFile);
oIndsgnSrvSArgs[1] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[1].setName("output-file");
oIndsgnSrvSArgs[1].setValue(sTargetFile);
// define service parameter
oIndsgnSrvRSParams.setScriptArgs(oIndsgnSrvSArgs);
oIndsgnSrvRSParams.setScriptFile(sScriptFile);
oIndsgnSrvRSParams.setScriptLanguage("javascript");
oIndsgnSrvRSParams.setScriptText("");
// create runscript
ServiceStub.RunScript oIndsgnSrvRS = new ServiceStub.RunScript();
// set parameter
oIndsgnSrvRS.setRunScriptParameters(oIndsgnSrvRSParams);
//$$$ there should be an answer returned by the InddSrvr
// execute SOAP call
ServiceStub.RunScriptResult oIndsgnSrvRes = oIndsgnSrvStub.RunScript(oIndsgnSrvRS);
if(oIndsgnSrvRes.getErrorNumber() == 0) {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_SUCCESS);
bOK = true;
} else {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_FAILURE);
bOK = false;
//$$$ should be set, if there is something returned by inddsrvr
//oServerProdJob.setErrorMsg(sErrorMsg);
} catch(Exception e) {
sError += e.getMessage() + "\n";
bOK = false;
--- SNIP END -----
The problem is that we don't get the error code and/or the error message from the Javascript in oIndsgnSrvRes. The error code is always 0 if I set an Integer value as return in the Javascript. If I set a String, there is an Exception in the Java application.
Here is the Java script we use:
--- SNIP BEGIN ---
main();
main()
var sError = "";
var sXMLInput = "";
var sLayoutPath = "";
// get the SDKCodeSnippetRunner object
var cbpAdapter = app.cbpCbpadapterObject
if (cbpAdapter) {
sXMLInput=app.scriptArgs.get("xml-input");
sLayoutOutputFile=app.scriptArgs.get("output-file");
sError = cbpAdapter.doProcess(sXMLInput, sLayoutOutputFile);
return sError; // This give an Exception; if I return an Integer the ScriptResult is always 0
--- SNIP END -----
If I try this with the test application from Adobe I get the error code correctly. But in the Java application, using SOAP, I can't get the error code.
What could be wrong?
Any ideas?
Thanks a lot for the support.
Kind regards
Hans

user11340104 wrote:
Hello -
i am calling sqlplus from a bash shell script. If the sql statement generates an error, how can I return that error code (unsuccessful) back to the bash shell?
Well, let google be your friend,
http://www.google.co.in/search?rlz=1C1GGLS_enIN327IN327&sourceid=chrome&ie=UTF-8&q=sqlplus+error+codes
There are many threads I guess talking about the same issue.
HTH
Aman....

How can I get rec'd text messages from the same subscriber not be appended

Hi,
Is there a way to configure the Apple iphone so that text messages from the same subscriber are displayed separately rather than appended to each other? In this way accidentally deleting one message wouldn't delete the entire history of messages from this subscriber.
When I launch the SMS service by pressing the green SMS button I am met by a screen that says Text Messages. On the left of this there is a button that says Edit and on the right there is one that is for writing a new message. Down the page are my messages all grouped by the originator of each messages. If I choose one I see that all messages from this source are present appended one after the other. There is also the option now to Clear on the top right hand corner. It is this Clear option I am worried about. If I choose Clear I am asked for a confirmation and then lo and behold as expected all my messages from this subscriber are deleted.
This is a work phone for support purposes and most of the texts will be from the telephone operator (i.e. the one same number) saying we have an email waiting to be read with a subject title giving a little description. I want to be in a position so that I don't accidentally delete the entire history of messages, say some evening when I'm tired or Monday morning if I 'm a bit asleep. Ideally I would prefer that each text message would stand alone in the Text Messages window irrespective of the originator and not be appended in a group fashion. Is there a way to do this?
Kind regards,
M

There is no way to do that on the iPhone. Messages will always be grouped into a 'conversation' based on the sender/recipient. Only Apple can change that behavior.
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

Checking message in the JMS queue

Hi there,
Is there a way to check the message is in the JMS queue? I tried to use the QueueBrowser. However, it always return me an enumeration = null
when I run the following "QueueBrowser.getEnumeration()". I am using JRun 3.0 application server.
And by the way, how would to know whether the message has been consumed by the receiver in a point to point model? We could still managed to send out messages even when the receiver client is not started. I understand that the receiver client would be able to receive those messages once they are started as the messages are in the queue. However, what if the queue is destroyed (some catastrophic event happen to the JMS provider) before the receiver client is started?

I have no problem using the QueueBrowser:
      QueueConnection qc;
      qc = qcf.createQueueConnection();
      QueueSession session;
      session = qc.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
      QueueBrowser browser = session.createBrowser(queue);
      Enumeration enum = browser.getEnumeration();The used JMS provider must support a persistence mode. When the server is restarted and there were messages in the queue, they are restored.
When receiving messages you can use autoacknowledge mode without transaction which means when receive() is called, the message is deleted from the queue. In transacted mode in addition to receive() you have to call commit() on the session in order to delete the message in the queue.
When using clientacknowledge you have to call message.acknowlegde() after receive().

Recall a message from the JMS destination

We are sending messages to a queue, using IBM MQ Series for messaging and JMS as the messaging system.
Could you please let me know, if there is a way we can recall messages sent to the queue?
Thanks,
Jayashree.

Are you using session or transactions?
If yes, you can do rollback.(I hope thats what you are looking for).
If you are looking for a way to get the message from the queue without
removing it, why not write a client code for that.

I've got my email folders showing but how can i put back my email messages into the folders from time machine

my mac has been restored & i can see my email folders but how do i put back the saved emails from my time macine i can locate n see them but cant restore them

Csound1 wrote:
Into one of the domain accounts, or a specific mailbox in a domain account, that's your choice but:
Remember that you are moving mail over the internet, and you are uploading (slower). If the quantities are large you must use caution.
1. Copy, don't move, in the event of a failure the original will still exist, delete it later.
2. Limit copies to <500 emails
3. Single copy operations are more reliable than multiple.
Take your time.
Thanks, but impractical. Many of the folders have more than 500 emails. Total is about 2 GB (which I have free on iCloud btw)
I tried creating a folder "Archive" in my iCloud, then tried dragging one iMac folder into the new "iCloud > Archive" folder on my iMac. I got the error message:
Some items could not be created:
The IMAP command “CREATE” failed with server error: Invalid mailbox name.

How to delete a junk mail that keeps coming back after deleting it from the junk box?

I have a junk mail from February that I really want to delete but it keeps coming back after deleting it several times. It comes back in the junk mail as 'read'.
How should I remove it?
Thanks for your help in advance!

If the email provider is Google, try going to the gmail web portal, (log on from a computer or your iPad using safari), and manually delete the contents of your junk and trash.
I did this today, and the reappearing junk has not (as of yet) reappeared. Knocking on wood.

How download iPhoto? I get this message from the AppStore: "These apps cannot be accepted on this computer."

How can I download iPhoto on my macbook pro.. I have lion and just had my harddrive replaced. iPhoto is missing!!
I tried to download from the6175 AppStore and I got this message...
"These apps cannot be accepted on this computer. Future updates of these apps can be found through Software Update."
I tried from Software Update but iPhoto doesn't show up at all. It's not in my computer at all!
HELP!

Reinstall it from the System Restore disks that came with your computer.
Regards
TD

Hi there, i have just had to restore my ipod to factory settings wiping all my music. how do i download back to my ipod from the computer. thanks

Hi there,
I have just updated my ipod to the latest upgrade but then had to restore it to the factory settings wiping all my music, could you tell me how to download it from my laptop to the ipod,a m not having much luck figuring it out.
Many thanks

To synce media from your iTunes library see:
iTunes: Syncing media content to iOS devices and iPod
Unless you restored the iPod on this computer/iTunes library yoo may not be able to sync music and videos using the manual method.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Reading Message from Foreign JMS Queue in SOA Suite 11g.

Hi,
I am trying to read a JMS message that has been put into a JMS Queue on a remote weblogic Server.
The steps that I know is that I need to create a foreign JMS Server and then probably use JMS Adapter to subscribe to the message that is lying in the remote queue.
Has anybody been able to achieve this kind of scenario working for a remote JMS queue? Also, is this supported by JMS Adapter in SOA11g?
Any help will be appreciated.
Regards,
Varun Maheshwari

Hi Atheek1,
Thanks for your reply.
The confusion that is pondering me is that do I need to create a Foreign JMS Server or should I create a JMS adapter and override the properties.
I have tried the steps for creating a Foreign Server from the below link
Unable to access remote JMS Queue through JMS Adapter
But I am not able to find the Foreign Server created and any connection factories and Destinations related to foreign Server in my JMS Destination while configuring JMS Adapter.
I am not sure how to do step2 as entailed by you.
Could you please explain me in little detail on how to do this or redirect me to some blog or forum which will be really helpful.
Cheers,
Varun

How do I restore my deleted text messages from the iCloud?

Is there any way to restore text messages that have accidentally been deleted?

You would have to restore from a backup made while your messages were still on your phone (described here: http://support.apple.com/kb/ht1766). This will revert all data and settings to those contained in the backup, not just messages. Before doing this be sure to import all photos and videos to your computer (http://support.apple.com/kb/HT4083) and back up your contacts (such as by syncing them with iCloud: Settings>iCloud>Contacts>On) as sometimes these get lost when restoring from a backup.

How to check the jms Queue is persistance or not in jboss application serve

hi,
i am using jboss as application server for jms and database is postgres.For an message store i am using the "*database store*".while starting the jms adding queue it is adding the messages to the jms queue after starting the jms receiver the datas are received sucessfully....afte some 10 to 13 hours i am getting java.lang.OutOfMemoryError in jms..so i checked the postgres table space.Table space is increased gradually...I think that the after receiver received that message the messages are not deleted in the database.how to debugg the the secnario in jboss as wel as in database.....how to chaeck the queue is in persistance or not persistance...
regards.
naresh govindaswamy.

Send a request to the server somehow, so that the server is aware of this. AJAX may be very useful in this if you want to do this asynchronously.
its very urgently This is irrelevant information. That's your problem. We don't care less or more. Some users here will even refuse to help you if you're putting pressure.

How to keep a back up of messages from the JMS queues?

Similar Messages

Maybe you are looking for