Getting Short dump due to large amount of data

Hi experts,
When we are running RALM_ME_MEASP_FULL_DOWNLOAD_SD program, every time we are getting Short dump due to large amount of data.
please suggest how to run this program without short dump.
Thanks & Regards
Prashant Gupta

Hi,
you do run the wrong APP I guess. The service you are running is for MAM20. If you are interested in MAM30 and MAM25, please use the correct service.
If you have a look for
*FULL_DOWNLOAD_SD
You find them all. Use the ones without the RALM in front - then the timeout should be solved as well. Bside that there is a great guid available that helps as well to solve some issues around server driven replication:
[MAM SERVER DRIVEN SETUP GUIDE|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/818ac119-0b01-0010-ba8b-b6e3f3490a63?quicklink=index&overridelayout=true]
Hope that helps to solve yourt issue.
Regards,
Oliver

Similar Messages

Regarding TXT File data truncation due to large amount of data

Hi Guys,
I am downloading data to txt.file in background.I am getting truncation of the records due to large amount of data. If it is less data it works good.
I have checked the Internal table SIZE for this and anywhy i have declared in OCCURS 0 only.
So please help me to find out what may this reason.I am confuced is there any limitation for TXT file??
Please help me guys..
Thanks in advance..
Prabhu.R

Hi Rakesh,
two ways.
1. Ask ur BASIS team to increase the memory level.
2. Check the PACKAGE SIZE option of select statement
Here u won't select all the data once but in packets of specified size. So get the packets of data and process.
Just press F1 on package size. That explanation will be enough to proceed further.
Thanks,
Vinod.

Getting short dump at the time of loading data from R/3 to ODS

Hi BW Grurus,
I am trying to load data from R/3 to ODS, but after running for a few minutes it is getting into the short dump and displays the following run time error. So please give me solution how I can load data without getting short dump. I tried thrice but it is giving the same and failed.
Run time error : TSV_TNEW_PAGE_ALLOC_FAILED

Hi,
Check, is start routine or individual routine in present in update/transfer rule?
May be read large amount data (select * from) another ODS and put into internal table cause these type of error.
Regards,
Saran

Short dump due termination in the program SAPLSNR3

Hi Experts,
While running an IP I am getting short dump, and error analysis says
An ASSIGN statement in the program "SAPLSNR3" contained a field symbol with
length 0. This is not possible. length 0.This is not possible.
can any one exlain why the IP is going for short dump,rectify the error and make the IP to run sucessful.
Regards,
Siddhardh

Hi Suresh,
Your dump is occuring due to database limit of sql statment (Native SQL) that is generated from your abap sql. The range is killing him (as you already notice).
The thread bellow have some info about this, but the solution can't be applyed to you:
To update 1 field of ztable(60 fields) for 2000 records in minimum DB hit
Maybe you can build some logic to reduce the value of two ranges (also concatenating them). Anyway, due to amount of lines involved (24.500 lines).... I don't think it is possible.
One option is filter the result on ABAP, after your SQL w/o the ranges you may try:
DELETE FROM TABLE i_glpct2
WHERE NOT ( racct IN r_profloss OR racct IN r_balsheet ).
This can raise a performance problem if the number of returned rows from database is to high.
Another option is change your database access. Where the values of the two ranges came from ? database ? If they came from database try to use INNER JOIN, this will solve the problem w/o performance problem.
Best Regards, Fernando Da Ró

Creation of data packages due to large amount of datasets leads to problems

Hi Experts,
We have build our own generic extractor.
When data packages (due to large amount of datasets) are created, different problems occur.
For example:
Datasets are now doubled and appear twice, one time in package one and a second time in package two. Since those datsets are not identical, information are lost while uploading those datasets to an ODS or Cube.
What can I do? SAP will not help due to generic datasource.
Any suggestion?
BR,
Thorsten

Hi All,
Thanks a million for your help.
My conclusion from your answers are the following.
a) Since the ODS is Standard - within transformation no datasets are deleted but aggregated.
b) Uploading a huge amount of datasets is possible in two ways:
b1) with selction criteria in InfoPackage and several uploads
b2) without selction criteria in InfoPackage and therefore an automatic split of datasets in data packages
c) both ways should have the same result within the ODS
Ok. Thanks for that.
So far I have only checked the data within PSA. In PSA number of datasets are not equal for variant b1 and b2.
Guess this is normal technical behaviour of BI.
I am fine when results in ODS are the same for b1 and b2.
Have a nice day.
BR,
Thorsten

Short Dump due to TIME_OUT Error

Hi,
We have a situation here, where the monthly data from R/3 is extracted to ODS (Full upload) and subsequently getting uploaded to infocube (Delta). Usually the ODS to infocube updation takes long hours of time (say 8 hours), because of complexity of the update rules over the cube and this was working fine for the past months.
But on 1st of this month when I extracted R/3 data went fine upto ODS, but failed in the further process (i.e., ODS to Infocube) resulting in a short dump. Extract is shown below
Short dump in the Warehouse
Diagnosis
The data update was not completed. A short dump has probably been logged in BW providing information about the error.
System response
"Caller 70" is missing.
Further analysis:
Search in the BW short dump overview for the short dump belonging to the request. Pay attention to the correct time and date on the selection screen.
You get a short dump list using the Wizard or via the menu path "Environment -> Short dump -> In the Data Warehouse".
So I want to try out with another option, Since we know the data coming to ODS on a monthly basis, instead of pushing the data to infocube in delta mode, can I upload the data using full update (but of course weekly wise) to cube ?.
What will be the complications?.
Please guide with your ideas
Thanks in advance,
Arun.

System response
"Caller 70" is missing.
Further analysis:
Search in the BW short dump overview for the short dump belonging to the request. Pay attention to the correct time and date on the selection screen.
You get a short dump list using the Wizard or via the menu path "Environment -> Short dump -> In the Data Warehouse".
Did you follow this recommendation? Did you check the short dump?
If it is really a time_out issue, the short dump will tell you so, but there can also be other causes for caller 70 missing.
It is a time_out you can either increase your time out setting, or decrease the package size in your infopackages;
kr,
Tom

Getting short dump "TSV_TNEW_PAGE_ALLOC_FAILED" during the load

Hi Experts,
I am getting short dump "TSV_TNEW_PAGE_ALLOC_FAILED" when loading data one ODS to Two cubes in 3.1 system . we have only 12000 records to load. this load is delta update. daily we loaded 14000 record from this load but today we are getting short dump.
Short Dump : TSV_TNEW_PAGE_ALLOC_FAILED
Description : No storage space available for extending the internal table.we attempted to extend an internal table, but the required space wasnot available.
Thanks

This is a memory issue whereby an internal table requires more memory than what is currently available. If you're executing this during processing of other ETL, then your memory is being consumed by all of the processes and you would need to change your schedule as to balance the load better.
Another possibility is that you have an extremely inefficient SQL statement in a routine that is causing the memory to be overly consumed. Even though the output may be less than average, there is a possiblity that it's reading more data in a SELECT statement and therefore requires more memory than normal.
Finally, have you Basis team look at this issue to determine if there's anything that they can do to resolve it.

Send large amounts of data

Hello everyone,
I made an applet that receives data, signs and returns the signed data. When the amount of data is too big, I break it into blocks of 255 bytes and use the method Signature.update.
OK, this is working fine, but perfomarnce is poor due to large amount of blocks. Is it possible to increase the size of the blocks?
Thanks.

Hi,
You cannot change the block size but you can change what you send in.
You may get better performance by sending multiples of your hash function block size as the card will not have to do internal buffering.
You could also do as much of the work in your host application as possible and then just send in the data that you need to operate on with the private key. Generating the hash of the message does not require a private key so can be done in your host. You then send the result of the hash to the card to be encrypted with the private key. This will be the fastest method.
Cheers,
Shane

Large Amount of Data in JSF

Hello,
I am using the Table Group component for displaying data in my application designed in Java Studio Creator.
I have enabled paging on the component. I use CachedRowSet on the bean for the page for getting the data. This works very well at the moment in my development environment. At the moment I am testing on small amount of data.
I was wondering how does this component perform with very large amounts of data (>75,000 rows). I noticed that there is a button available for users to retrieve all the rows. So I was wondering apart from that instance, when viewing in a paged mode does the component get all the results from the database everytime ?
Which component would be best suited for displaying large amounts of data in a table format?
Thanks In Advance!!

Thanks for your reply. The table control that I use does have paging as a feature and I have enabled it. It still takes time to load the data initially.
I wonder if it is got to do with the logic of paging. How do you specify which set of 20 records to extract from SQL.
Thanks for your help!!

Open Large amount of data

Hi
I have a file on application server in .dat format, it contains large amount of data may be 2 million of records or more, I need to open the file to check the record count, is there any software or any option to open the file, I have tried opening with Notepad, excel .... it gives error..
please let me know
Thanks

Hi,
Try this..
Go to AL11..
Go to the file directory..Then in the file there will be field called length..which is the total length of the file in characters..
If you know the length of a single line..
Divide the length of the file by the length of single line..I believe you will get the number of records..
Thanks,
Naren

Bex Report Designer - Large amount of data issue

Hi Experts,
I am trying to execute (on Portal) report made in BEx Report Designer, with about 30 000 pages, and the only thing I am getting is a blank page. Everything works fine at about 3000 pages. Do I need to set something to allow processing such large amount of data?
Regards
Vladimir

Hi Sauro,
I have not seen this behavior, but it has been a while since I tried to send an input schedule that large. I think the last time was on a BPC NW 7.0 SP06 system and it worked OK. If you are on a recent support package, then you should search for relevant notes (none come to mind for me, but searching yourself is always a good idea) and if you don't find one then you should open a support message with SAP, with very specific instructions for recreating the problem from a clean input-schedule.
Good luck,
Ethan

Azure Cloud service fails when sent large amount of data

This is the error;
Exception in AZURE Call: An error occurred while receiving the HTTP response to http://xxxx.cloudapp.net/Service1.svc. This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being
aborted by the server (possibly due to the service shutting down). See server logs for more details.
Calls with smaller amounts of data work fine. Large amounts of data cause this error.
How can I fix this??

Go to the web.config file, look for the <binding> that is being used for your service, and adjust the various parameters that limit the maximum length of the messages, such as
maxReceivedMessageSize.
http://msdn.microsoft.com/en-us/library/system.servicemodel.basichttpbinding.maxreceivedmessagesize(v=vs.100).aspx
Make sure that you specify a size that is large enough to accomodate the amount of data that you are sending (the default is 64Kb).
Note that even if you set a very large value here, you won't be able to go beyond the maximum request length that is configured in IIS. If I recall correctly, the default limit in IIS is 8 megabytes.

DSS problems when publishing large amount of data fast

Has anyone experienced problems when sending large amounts of data using the DSS. I have approximately 130 to 150 items that I send through the DSS to communicate between different parts of my application.
There are several loops publishing data. One publishes approximately 50 items in a rate of 50ms, another about 40 items with 100ms publishing rate.
I send a command to a subprogram (125ms) that reads and publishes the answer on a DSS URL (app 125 ms). So that is one item on DSS for about 250ms. But this data is not seen on my man GUI window that reads the DSS URL.
My questions are
1. Is there any limit in speed (frequency) for data publishing in DSS?
2. Can DSS be unstable if loaded to much?
3. Can I lose/miss data in any situation?
4. In the DSS Manager I have doubled the MaxItems and MaxConnections. How will this affect my system?
5. When I run my full application I have experienced the following error Fatal Internal Error : ”memory.ccp” , line 638. Can this be a result of my large application and the heavy load on DSS? (se attached picture)
Regards
Idriz Zogaj
Idriz "Minnet" Zogaj, M.Sc. Engineering Physics
Memory Profesional
direct: +46 (0) - 734 32 00 10
http://www.zogaj.se

LuI wrote:
>
> Hi all,
>
> I am frustrated on VISA serial comm. It looks so neat and its
> fantastic what it supposes to do for a develloper, but sometimes one
> runs into trouble very deep.
> I have an app where I have to read large amounts of data streamed by
> 13 µCs at 230kBaud. (They do not necessarily need to stream all at the
> same time.)
> I use either a Moxa multiport adapter C320 with 16 serial ports or -
> for test purposes - a Keyspan serial-2-USB adapter with 4 serial
> ports.
Does it work better if you use the serial port(s) on your motherboard?
If so, then get a better serial adapter. If not, look more closely at
VISA.
Some programs have some issues on serial adapters but run fine on a
regular serial port. We've had that problem recent
ly.
Best, Mark

Freeze when writing large amount of data to iPod through USB

I used to take backups of my PowerBook to my 60G iPod video. Backups are taken with tar in terminal directly to mounted iPod volume.
Now, every time I try to write a big amount of data to iPod (from MacBook Pro), the whole system freezes (mouse cursor moves, but nothing else can be done). When the USB-cable is pulled off, the system recovers and acts as it should. This problem happens every time a large amount of data is written to iPod.
The same iPod works perfectly (when backupping) in PowerBook and small amounts of data can be easily written to it (in MacBook Pro) without problems.
Does anyone else have the same problem? Any ideas why is this and how to resolve the issue?
MacBook Pro, 2.0Ghz, 100GB 7200RPM, 1GB Ram Mac OS X (10.4.5) IPod Video 60G connected through USB

Ex PC user...never had a problem.
Got a MacBook Pro last week...having the same issues...and this is now with an exchanged machine!
I've read elsewhere that it's something to do with the USB timing out. And if you get a new USB port and attach it (and it's powered separately), it should work. Kind of a bummer, but, those folks who tried it say it works.
Me, I can upload to Ipod piecemeal, manually...but even then, it sometimes freezes.
The good news is that once the Ipod is loaded, the problem shouldnt' happen. It's the large amounts of data.
Apple should DEFINITELY fix this though. Unbelievable.
MacBook Pro 2.0 Mac OS X (10.4.6)

How do I pause an iCloud restore for app with large amounts of data?

I am using an iPhone app which is holding 10 Gb of data (media files) .
Unfortunately, although all data was backed up, my iPhone 4 was faulty and needed to be replaced with a new handset. On restore, the 10Gb of data takes a very long time to restore over wi-fi. If interrupted (I reached the halfway point during the night) to go to work or take the dog for a walk, I end up of course on 3G for a short period of time.
Next time I am in a wi-fi zone the app is restoring again right from the beginning
How does anyone restore an app with large amounts of data or pause a restore?

You can use classifications but there is no auto feature to archive like that on web apps.
In terms of the blog, Like I have said to everyone that has posted about blog preview images:
http://www.prettypollution.com.au/business-catalyst-blog
Just one example of an image at the start of the blog post rendering out, not hard at all.

Getting Short dump due to large amount of data

Similar Messages

Maybe you are looking for