Getting the data in file using DAQ assistant in Labview

I am using SCXI 1000 chassis, SCXI 1125 input module and SCXI 1320
terminal.
I am using DAQ assistant in labview to obtain temperatures and store it in
a file. The experiments run the whole day and I need the whole data
generated during this time to be stored in a single file, but I am unable
to store it in a single file.
Can someone please give me some insight as to how can I achieve this?

Hi Mr,
It would be helpful to see your code to see exactly how you are acquiring the data. Are you doing continuous buffered measurements? Or are you performing single point temperature measurements in a while loop?
Either way you will want to use the "write to spreadsheet" VI in your loop. Simply wire your data into the "write to spreadsheet" vi and se the "append to file" input to TRUE. This will make the data add on to the end of the file with each iteration of the loop. The "write to spreadsheet" VI is located in the file IO pallette in LabVIEW.
Thanks,
Sal

Similar Messages

  • Can't use Daq Assistant in Labview 7.1

    hi! I have Labview 7.1 installed and an AT-MIO-16E-10 NI board. I can see the board in MAX\devices&Interfaces\traditional NI-DAQ but i can't run any tests(Test panels). I don't know if this is normal for this NI-DAQ model. anyway my main conceirn is that i can not use DAQ Assistant in LabView(when i double click on it or right click->Properties nothing happends). So i can't use my board in LabView. please help! thanks a lot

    You can use your board in LabVIEW but you can't use it with DAQmx. In the DAQ Quick Start Guide, the supported devices are listed and the AT E series is only supported with traditional DAQ.

  • How can I open a file and get the data inside  file when using  WebStart

    When I use ClassLoader,
    Which methold can I use the read the information inside that file?
    Thanks
    Ryan

    Assuming you are trying to read the jar file.
    http://forum.java.sun.com/thread.jspa?forumID=22&threadID=572955
    rykk

  • Retrieve the date a file was created in the background

    EDITED CONTENT----
    Apologies all...I just realized there is a specific forum for this type of question.  I will post it there.
    Thanks Marilyn for point this out>>>>should have read it first as suggested. 
    /message/2572763#2572763 [original link is broken]
    Hi guru's,
    I have a custom application that does some windows directory cleaning based an older than 'X' days setting.  I have to do some calculation to determine if the file being processed is older than that number of day and delete it if it is.  To determine the file created date I use the method DIRECTORY_LIST_FILES from CL_GUI_FRONTEND_SERVICES.  This works great in the foreground but dumps in the background because the handle object reference is not created in the class constructor and subsequently does a call to a "NULL" object.
    My question:
    Does anyone know of a way to get the date a file was created while running in the background?  If not, please read on --- I have another question regarding an alternate approach I am trying.
    I have tried the following approach FM EPS_GET_DIRECTORY_LISTING to return an internal table with all files in a directory.  Works fine in the background, but the created date is not in the return values.  Soooooo I looped at the internal table and called this system function:
            CALL 'C_FILE_ATTRIBUTES'
                ID 'NAME'     FIELD tempfile
                ID 'TYPE'     FIELD singleFile-
                ID 'LEN'      FIELD file-len
                ID 'OWNER'    FIELD file-owner
                ID 'MTIME'    FIELD file-mtime
                ID 'MODE'     FIELD file-mode
                ID 'ERRNO'    FIELD file-errno
                ID 'ERRMSG'   FIELD file-errmsg.
    This returns the MTime, which is the Modified time (in Epoch time format: number of seconds since Midnight 1 January 1970), but no created time.  Does anyone know the ID for the created time?  I tried CTIME but no value is returned. 
    Along with this question: any idea if a FM or Method exists to convert Epoch time to a standard time.  I could do the calculation myself....but it seems someone would have already done this.  No point in re-creating the wheel.
    Thanks so much,
    Quack
    Message was edited by:
            Ryan Quackenboss

    I will be happy to.
    Please post something to this thread. 
    Retrieve the date a file was created in the background
    I UNMARKED this question as a post and reposted in the data transfer forum.
    That post is still open.  Once you post there, I will mark it ANSWERED and award points.
    Thanks for the help
    Quack

  • How to get the data  of a particular attribute

    Hi,
    I want to display some of the names in a table .
    (condition is given in the SELECT statement)
    please tell me what to write in the while loop for getting the data . I used
    while (rs.next()!=null){
    String i =rs.getString("name");
    it`s not compiling.

    replace this line with
    while (rs.next()!=null){
    with
    while (rs.next()){

  • How to get the most current file based on date and time stamp using SSIS?

    Hello,
    Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
    Thanks
    thx regards dinesh vv

    hi simon
    i excuted this script it is giving error..
       Microsoft SQL Server Integration Services Script Task
       Write scripts using Microsoft Visual C# 2008.
       The ScriptMain is the entry point class of the script.
    using System;
    using System.Data;
    using Microsoft.SqlServer.Dts.Runtime;
    using System.Windows.Forms;
    namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
        [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
        public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
            #region VSTA generated code
            enum ScriptResults
                Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
                Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
            #endregion
            The execution engine calls this method when the task executes.
            To access the object model, use the Dts property. Connections, variables, events,
            and logging features are available as members of the Dts property as shown in the following examples.
            To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
            To post a log entry, call Dts.Log("This is my log text", 999, null);
            To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
            To use the connections collection use something like the following:
            ConnectionManager cm = Dts.Connections.Add("OLEDB");
            cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
            Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
            To open Help, press F1.
            public void Main()
                string file = Dts.Variables["User::FolderName"].Value.ToString();
                string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
                System.IO.FileInfo finf;
                DateTime currentDate = new DateTime();
                string lastFile = string.Empty;
                foreach (string f in files)
                    finf = new System.IO.FileInfo(f);
                    if (finf.CreationTime >= currentDate)
                        currentDate = finf.CreationTime;
                        lastFile = f;
                Dts.Variables["User::LastFile"].Value = lastFile;
                Dts.TaskResult = (int)ScriptResults.Success;
    thx regards dinesh vv

  • Data Integrator has no read permissions to get the data file using FTP

    Hi,
    I wonder if you could help.
    We have installed the data integrator and are using FTP to get the data file from the SAP server to the DI server. The files are created by the SAP admin user with permissions 660. The FTP user is not in the sapsys group so cannot read the files.
    Has anyone come accross this problem and how did you solve it?
    Many thanks.

    Hi,
    you might want to put you entry into the EIM forum where also the Data Integrator topics are being handled:
    Data Services and Data Quality
    Ingo

  • How can I rollback from Yosemite to Lion? I need to do this as I purchased a newer iMac and I have the old 17" iMac HD that I want to get the data migrated from. When I start the Migration Assistant it tells me that the OS X version is too old. Help!

    I have purchased a newer mid 2011 iMac for my wife to replace her dead 17"iMac from 2006. It was running Snow Leopard. The new iMac has Yosemite and when I go into Migration Assistant it tells me that the OS X is too old, implying that I cannot get the data from it. How can I migrate this data to the new iMac? I have the hard drive removed and in an external enclosure connected to the new iMac.
    Thanks,
    Bill Stratman

    Since any OS since Lion does not support Rosetta or PPC applications, you may want to check her apps for compatibility.
    Have you tried to follow all the instructions here:
    OS X Yosemite: Transfer your info from a computer or storage device
    Also, as a general note: when you got the 2011 iMac did it have the original OS installed as required by the SLA? The seller is to remove any OS version obtained at the app store since the license is not transferable - did he do that? If not, as the OS download is tied to the Apple ID used to obtain it, you will not be able to update apps or reinstall the OS, so may I suggest you do this step now before you start porting over all the files. Use Internet Recovery: Hold Command + Option + R while restarting/rebooting until you see a spinning globe and a progress bar. After 2 - 10 minutes, you'll be connected to Apple's servers and see a Utilities window. Go to Disk Utility and choose erase your drive; once finished, go back to the window and choose to reinstall OS X. This should install a fresh original OS version which you can then update and tie to your wife's Apple ID.

  • Need how to get the data from the external file in eCatt

    Hi ,
      Could any body suggest how to get the values from the external file(Excel,CSV file,Text file) and pass it as varaiable in ecatt Test script.
    Problem: Need to execute FK01-Vendor creation Transaction with multiple set of data .As per my understanding we could achive through Variants in Testdata set in eCatt .
    But is there any way to store the data in excell file and get the data and pass it to FK01 Test scripts
    Appreciate response on this

    Hi
    See the links they may be useful
    check these link,
    eCATT- An Introduction
    /people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
    Creating Test Scripts
    /people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
    eCATT Logs
    /people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
    eCATT Scripts Creation – TCD Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
    Creation of Test Data Container
    /people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
    eCATT Scripts Creation - SAPGUI Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
    Integrating ECATT & MERCURY QTP Part -1
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    Using eCatt to Test Web Dynpro ABAP
    /people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
    and
    -command reference
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
    /people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
    http://prasadbabu.blogspot.com
    https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    http://www.erpgenie.com/ecatt/index.htm
    hope this helps.
    Reward points for useful Answers
    Regards
    Anji

  • XML..: Problem getting the data in the XML-file..

    I'm developing a flash-file for my customer to use when
    displaying list of products he's selling.
    His list of products is inside a XML-file and he want me to
    display an overview of the products inside a datagrid, so when you
    click on the product you're interested in the productinfo will be
    displayed.
    But.. I'm having problems grabbing the data I want as it
    seems to me that I have to use the unik ID's for each products to
    get the data I want. I've tried adding the unik ID-code to my
    action script but it still won't work.
    Here's a part of the XML-code:
    <Tooldata>
    <Store name="N/A" zipcode="0033450" city="N/A" url="N/A"
    phone="N/A" fax="N/A" email="N/A">
    <Tool unikID="5_0022" control="14" cmnd="update">
    <Toolgroupe>Hammer</Toolgroupe>
    <Brand>Knipps</Brand>
    <Model>K55_Knipps</Model>
    <Price>35€</Price>
    <Weight>N/A</Weight>
    <Soldout>0</Soldout>
    <Color>Red/Black</Color>
    <Images>
    <Images image="5_0022.jpg" prioritet="1" gen_id="16"
    desc="MainImage"/>
    <Images image="5_0022_1.jpg" prioritet="2" gen_id="16"
    desc="Image 1"/>
    <Images image="5_0022_2.jpg" prioritet="3" gen_id="16"
    desc="Image 2"/>
    <Images image="5_0022_3.jpg" prioritet="4" gen_id="16"
    desc="Image 3"/>
    </Images>
    Now, the code above is only one item/product. But there are
    several proucts listed in the XML-file and I find it hard to get
    the product and the product info that I want to be displayed.
    Here's my action script:
    var xmlLoader:URLLoader = new URLLoader();
    var xmlData:XML = new XML();
    xmlLoader.addEventListener(Event.COMPLETE, LoadXML);
    xmlLoader.load(new URLRequest("ToolData.xml"));
    function LoadXML(e:Event):void {
    xmlData = new XML(e.target.data);
    ParseBildata(xmlData);
    function ParseTooldata(TooldataInput:XML):void {
    trace("XML Output");
    trace("------------------------");
    trace(TooldataInput.Store);
    If I want to trace the images I just write
    "trace(TooldataInput.Store.Images);
    But if I want to trace one unik tool it's impossible. Well,
    maybe not impossible.. I just don't know how to do just that.
    When you trace (TooldataInput.Store); you get all the tools
    at that store. But how do I trace only one tool using the unikID??
    Thanks a lot in advance!

    Ace,
    When using E4X if you have multiple nodes at the same level
    you should be able to access them as an XMLList. Looking at your
    XML you should be able to access each <Tool> node as:
    TooldataInput.Store.Tool[0];
    TooldataInput.Store.Tool[1];
    or as an entire list
    TooldataInput.Store.children()
    WL

  • I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do?  How can I get the data off this disc?  I can see it has been already burned, so files are on there?

    I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do?  How can I get the data off this disc?  I can see it has been already burned, so files are on there?

    Try cleaning the lens and see if that will restore functionality to the DVD drive.  Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth)  around a business card and insert it gently inside the slot.
    If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
    Ciao.

  • What is the easiest way to get the data from the mailmerge to form Pages files that can be saved separately?

    Using Iwork 09 I have spent several hours setting up a mail merge from a spread sheet in Numbers to create receipts for my customers from a Pages template.
    After the merge I am left with one long Pages document that will not save as separate files; one per customer, it will only save the whole document of several receipts.
    What is the easiest way to get the data from the mailmerge to form Pages files that can be saved separately?
    Many thanks in advance.
    Richard

    Mr. Clark,
    You will probably be more pleased with the iWork apps when you begin to learn your way around. Until you learn such basic things as how to print only one page of a document, you will probably continue to be disappointed.
    Does your Print dialog look like this:
    Or like this:
    If it looks like the first one, then you will want to click this expander control:
    Regards,
    Jerry

  • When I look up the creation date for files on my Macbook I get the date and month in brackets, but not the year.  Why is this and how can I look up the year?

    When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year.  Why is this and how can I look up the year? 

    Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
    To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar.

  • HT4623 I still can't update, i get error 3252 every time, after over 500mb is downloaded, not happy to waste all the data i could use for other things

    I still can't update, i get error 3252 every time, after over 500mb is downloaded, not happy to waste all the data i could use for other things.
    is there another way i can download the update? it just never work, tried multiple time

    The most common causes are:
    Your antivirus, firewall or router security is blocking access to Apple's servers - try temporarily disabling them - if you have Kaspersky this is definitely the problem
    At some time in the past you used this computer to jailbreak, unlock or otherwise hack ANY iPhone, iPod Touch or iPad - if this applies to you your hosts file is corrupt and you will have to edit it and remove any lines that contain "gs.apple.com"

  • My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

    answered in your other thread LR 4 suddenly no longer recognizes files.

Maybe you are looking for