Getting the messages after SUBMIT report

Hi,
I have a requirement, wherein I'll SUBMIT a report(Report A) through a background job. I also have a custom table, which will have the job information (JOBNAME, JOBCOUNT).
Now, I want to have a separate control report(Report B) which will read the custom table for the job information and will output the results of the report A submitted through the job. How can this be achieved?
Also Is there any way, through which I can get the messages raised by the report A using the job information in report B?
Thanks in advance.
Sujit.

Similar Messages

Message after submit report

Hello all,
I have a program that submits a report. This report sends the output to the spool. When the process executes the submit command I get the following message:
Spool request (number &) created without immediate output.
I need the spool request number for further processing. Does anybody know how to get the message and the spool request number at runtime? Kind of like the messages we get with a call transaction into the message table. By the way, the message is NOT available in the system structure SY(SYST).

Here is what I've done in the past.
1) in the submitted program, export the sy-spono to a memory id. This should be the very last statement of the program.
2) in the calling program, after the SUBMIT statment, import the spool number into memory id.
3) do what ever you need to do with the sy-spono.
Regards,
Rich Heilman

Capture message after SUBMIT report

I have called submit report like below in RFC function module .
submit rfitemap
              with kd_lifnr in r_it_lifnr
              with x_apar   eq abap_true
              with x_merk   eq abap_true
              with x_norm   eq abap_true
              with x_opsel eq abap_true
              with x_park   eq abap_true
              with x_shbv   eq abap_true
              exporting list to memory and return.
how to capture or skip error or information populated by submit program ?
As the function module is a RFC function module, the FM is called from some SMDL program . Once the program executes submit statement
is giving system failure exception and giving message like 'No connection with development system'.
Instead of giving messages populated in return table ,the SMDL program returns "NO connection" message.
How to display the message from return table ?

Hello Kachana,
You can try like mentioned in the below thread with JOB OPEN, submit your program, JOB CLOSE and read the job log to get the messages raised during the submit program.
How do I capture error/information messages and Output of a report using SUMBIT statement, when called in a function mod…
Regards,
TP

Getting spool number after SUBMIT report statement

Hello Everyone,
Suppose there is a scenario, when 3 users are sharing same session and executing a program simultaneously.
In the program, the users are submitting a program to sap spool such that a spool no is generated.
and based on that spool no, the users read its log...
How will we identify that which spool no belongs to which particular session so that the the user will read its own loag and not the other person/'s log...

Hi,
The program can be submitted as a job which has a unique job number and accordingly spool number will be generated which can read.
See code e.g below:
DATA: number TYPE tbtcjob-jobcount,
      name TYPE tbtcjob-jobname VALUE 'JOB_TEST',
      print_parameters TYPE pri_params.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
    jobname          = name
IMPORTING
    jobcount         = number
EXCEPTIONS
    cant_create_job = 1
    invalid_job_data = 2
    jobname_missing = 3
    OTHERS           = 4.
IF sy-subrc = 0.
SUBMIT submitable TO SAP-SPOOL
                    SPOOL PARAMETERS print_parameters
                    WITHOUT SPOOL DYNPRO
                    VIA JOB name NUMBER number
                    AND RETURN.
IF sy-subrc = 0.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
        jobcount             = number
        jobname              = name
        strtimmed            = 'X'
      EXCEPTIONS
        cant_start_immediate = 1
        invalid_startdate    = 2
        jobname_missing      = 3
        job_close_failed     = 4
        job_nosteps          = 5
        job_notex            = 6
        lock_failed          = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDIF.
Hope it helps.
Regards,
Mansi.

I just bought an iPad air and tried to purchase books in ibooks. After download and trying to open book I get the message "cannot open "storm front" it is formatted incorrectly, or is not a format that ibooks can open. I get the same message on my iPhone.

I just bought an iPad air and tried to purchase books in ibooks. After download and trying to open book I get the message "cannot open "storm front" it is formatted incorrectly, or is not a format that ibooks can open. I get the same message on my iPhone. What is up? Please help.

send problem to Apple.
http://www.apple.com/feedback/ipad.html
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
 Cheers, Tom

I keep getting this message after closing Firefox and attempt to reopen-Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

I keep getting this message after closing Firefox and attempt to reopen-Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

See:
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Profile_in_use

I can't use firefox after upgrading to 4.0. I get the message I have to restart my computer for upgrading, but ik doesn't start. I get the message over and over

I can't open firefox after upgrading to 4.0
I get the message over and over again that i have to restart my computer for upgrading to firefox.
I tried new installation. But i got problems on all my accounts

Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access.

Why am I still getting this message after logging in - This computer is no longer authorized for apps that are installed on the iPhone "Myron Liptzin's iPhone". Would you like to authorize this computer for items purchased from the iTunes Store?

why am I still getting this message after logging in? "This computer is no longer authorized for apps that are installed on the iPhone “*************s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?" - after I have logged in and get the message that the computer is already authorized!!!?? - and then the above message pops up again?

Click here and follow the instructions.
(71175)

HT5037 I still get the message to download the app, but I did, and the installation was allegedly successful. This even happens after a reboot

I still get the message to download the app, but I did, and the installation was allegedly successful. This even happens after a reboot

I guess that was a bit cryptic. I'm trying to update iPhoto from system 10.5.6, a PowerPC system, to 10.8. The app I downloaded is iPhotoLibraryUpgrader.dmg. I open that and I see Iphoto Library Upgrader.pkg. Igo through the install, which says it completes successfully. However, when I double-click on the iPhoto icon on the dock, I get the oroginal message that the upgrade must be installed. I hope this gives enough information to diagnose the problem. I apologize for the first message's laack of detail.

I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer. It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes

I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.

Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

After I started using Airport Express, my HP LaserJet 5000 won't print. I get the message "Network host '192.168.0.4' is busy." How do I fix this?

After I started using Airport Express, I get the message " host '192.168.0.4' is busy" andmy HP [ethernet] printer no longer works.

OK, I found this thread which answered my question.
http://discussions.apple.com/thread.jspa?messageID=610763&#610763

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

After a recovery reinstall of 10.8.5, using Safari 6.0.3, I get the message "Safari won't open because of a problem"

After a recovery reinstall of 10.8.5 and using Safari 6.0.3, I get the message "Safari won't open because of a problem"
I'm not sure if this Safari is compatible. I also have Safari 7.0.4 in my applications folder, which i downloaded as an attempt to
solve the problem, but it isn't compatible with my system.

Having two copies of Safari on the hard drive is what's keeping Safari from opening.
Move the 7.0.4 version to the Trash.
Then restart your Mac and try Safari.
Safari 7.0.4 won't run on Mountain Lion. Only v10.9 Mavericks.

I'm trying to install a cd application and I keep getting the message 'you do not have permission to use the application FSP OS X' Even after selecting always allow and entering my login details it still won't accept it. Help!!..

I'm trying to install a cd application and I keep getting the message 'you do not have permission to use the application FSP OS X' Even after selecting always allow and entering my login details it still won't accept it. Help!!..

Please repost in the Final Cut Pro forum. Have you considered upgrading your machine, if you are still running Leopard your machine may be as old as 5 years old. While this should not matter you probably won't get the performance you want out of a demanding app like FCP.
Best of luck.

After a power failure while iPhoto was running, I get the message "Your photo library is either in use by another application or has become unreadable" and iPhoto will not open????

After a power failure while iPhoto was running, I get the message "Your photo library is either in use by another application or has become unreadable" and iPhoto will not open???? held down the option and the command and tried to run what was ticked off and it just sits there with a spinning wheel and does nothing, can I throw the app away and download a new one? or will it still not open?

, can I throw the app away and download a new one? or will it still not open?
You could, but the error message is indicating that your iPhoto library needs repairing.
Check, if iPhoto will run, if you launch it on a new library. Hold down the alt/option key, while you launch iPhoto. Select to create a new library from the panel that will show. Can you create a new library? If yes, try again to fix the library. Which options have you tried from the Library First Aid panel, when you launched iPhoto with the option and command key held down?
If you have not tried "Rebuild"; do that next. But be sure to make a backup of your iPhoto library, before you try this.

Getting the messages after SUBMIT report

Similar Messages

Maybe you are looking for