Getting the response from a FileReference upload
This question is about the "upload" method of the
FileReference class.
Is there any way to read the HTTP response after a file
upload is complete? For example, a user uploads an file to a
server. The server saves the file and assigns it an ID. The server
then writes the ID to the HTTP response. How does the client read
that response?
inlineblue wrote:
This was kicked around a while back in the Flexcoders list.
Everyone agrees this would be very useful, but not currently
available. Sigh.
Flexcoders said what? (Am I missing something? Ahh - the date of the original post...)
fileReference.addEventListener(DataEvent.UPLOAD_COMPLETE_DATA, uploadComplete);
private function uploadComplete(event:DataEvent):void {
trace(event.data);
getWriter() or getOutputStream() on the servlet response to send "stuff" back...
Similar Messages
-
Unable to get the response from dynamic partnerlink
Hi
I used dynamic partnerlink, in this i am able to invoke the services dynamcially but i am unable to get the response from the services which i had invoked dynamically. In my dynamic partnerlink wsdl i had included callback binding and call back service in the wsdl you can see them below
<binding name="LoanServiceCallbackBinding" type="tns:LoanServiceCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="onResult">
<soap:operation soapAction="onResult" style="document"/>
<input>
<soap:header message="tns:RelatesToHeader" part="RelatesTo" use="literal" required="false"/>
<soap:body use="literal"/>
</input>
</operation>
</binding>
<service name="LoanServiceCallbackService">
<port name="LoanServiceCallbackPort" binding="tns:LoanServiceCallbackBinding">
<soap:address location="http://openuri.org"/>
</port>
</service>
please help me on this
thanks
SrikanthHi, thanks for the input
Actually My partnerLink had two messageTypes one for Input message request and the other for the Output message request and for the input message i had used the operation as initiate also for the output messsage type operation as result.For both of them binding is defined.
With these am passing the values from myBPELl to the service which am nvoking dynamically but unable to capture the response the variables are local to myBPEL. -
Getting the response in a single file
Dear friends,
I need a clarriffcation, i am getting the response from rfc for my scenario file-xi-rfc(synchronous). And the result was stored in the ftp folder as a file.Now my issue is my source file having more than one sales order detials so the bappi is triggerd more than once and a result file is created for every sale order created. but i need a single file only to created having all the details of the created sale order. Please tell me how can i hold all the values together and write it at once in a single file. I have tried in sdn but i couldnot get the relevant answer.note i need to perform the same with out bpm.
Thanks and Regards
KarthikeyanThat should be possible using RFC mapping lookups, which is explained in detail in https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
-
How to get the Response Code when a URL is launched from Web Dynpro
Hello Experts,
I have a Web Dynpro Application in which in one of its views i have an IFrame UI element in which i will show a resource stored somewhere ..
But before showing it i want to check if the resource actually exists. For this i have to check the HTTP Response code from Web Dynpro Application without setting it in the Iframe..
I am using the following code to get the Response Code:
try{
URL url = new URL("Some Url");
HttpURLConnection.setFollowRedirects(false);
HttpURLConnection connection = (HttpURLConnection) url.openConnection();
connection.connect();
wdComponentAPI.getMessageManager().reportSuccess("Response code ="+connection.getResponseCode());
}catch(Exception e){
wdComponentAPI.getMessageManager().reportSuccess("Exception");
Now the Problem is whatever response Code occurs 403 (for No Proper Authorization), 404 (for Resource not found) etc..
i always get Response Code= 500 (which is for Internal Server Error) shown in the messgae i have printed.
Please let me know the correct way of getting the Response Code from Web Dynpro.
Also my resource is lying on a SAP Portal 6.4
Best Regards
Sundeep
Edited by: Sundeep Sethi on Feb 18, 2008 9:07 AM
Edited by: Sundeep Sethi on Feb 18, 2008 10:23 AMHi,
Check this code from /thread/5242768 [original link is broken] if it works.
try{
URL myurl = new URL("http://calendar.google.com");
URLConnection connection = myurl.openConnection();
if(connection instanceof HttpURLConnection) {
HttpURLConnection httpConnection = (HttpURLConnection) connection;
HttpURLConnection.setFollowRedirects(true);
httpConnection.setRequestMethod("HEAD");
httpConnection.connect();
System.out.println("Response = "+httpConnection.getResponseCode());
catch(Exception e) {
// print exception
Regards,
Harini S -
Can't get any response from the Tuner - is it broken?
I'm happily chugging away through my new David Nahmani tutorials and I've discovered that I can get no response from the Tuner. The controls in the window appear to be working, but no line appears in the meter and flat lines appear in the center for pitch and octave. The channel strip indicates normal sound input and variation. I don't have any trouble recording (so far anyway). Is there anything I'm not aware of that could cause this?
Thanks for the reply, Rob. I'm just trying to tune a wind instrument through the built-in mic on my MacBook Pro, but I discovered the answer not too long after submitting the question. As I said, I'm trying to work through the Nahmani Logic Pro and Logic Express 8 book. I've been trying to be very meticulous about the installation and the setup for the tutorials, but I guess I inadvertently made settings changes that interfered with the Tuner, because choosing Logic Express > Preferences > Initialize All Except Key Commands allowed the Tuner to work the way I expected. I assumed the problem must have been bus related after I saw the Tuner respond to internal playback after modifying some bus settings, so I executed that command and all was well (uh, I should probably change that to "most was well", but at least the Tuner is working now). Thanks again.
-
I bought and was charged for bingo chips in bingo bash and have not received the chips.. I can't get a response from bingo bash! How do I get my chips?
Welcome to the Apple Support Communities
If I have understood you properly, to do that, you have to create a new administrator user with your name and for your uses. Follow these steps:
1. Open System Preferences > Users & Groups, and press the + button to create a new administrator account.
2. When you have finished creating that user, open > Log Out, and log in your new user.
3. Open System Preferences > Users & Groups, select the old user and press the - button to remove the user. If you want, you can select the option to remove the Home folder of this user, so you will only have the Home folder for your account -
How to get the response of a vbscript ran from extended js?
Hi All,
I want to get the result from a vbscript, how to get that in my jsx? This is what I'm doing-
vbscript (this will return me something, i've added just a sample string)
Wscript.Echo "Like this?"
jsx
var a = File("C:\\Users\\Sahil\\AppData\\Roaming\\CreativeWorx\\1.vbs");
var b=a.execute();
Now, variable b returns me true/false; and the output i.e. "Like this?" is alerted! So my question is-
1. How to get the output in a variable?
2. How to avoid the alert
So, I simply wish to get the output from my vbscript and then perform certain functions accordingly, alos, I dont want this to be alerted!
Any help will be highly appreciated!The capitalization is app.doScript and not app.doscript that is if you are trying to get a jsx script to run and access a string from from a vbs script.
When defining the VBscript for multiline scripts the easiest method is to use triple quotes
VBscript = """dim WMI: set WMI = GetObject("winmgmts:\\.\root\cimv2")
dim Nads: set Nads = WMI.ExecQuery("Select * from Win32_NetworkAdapter where physicaladapter=true")
dim nad
for each Nad in Nads
if not isnull(Nad.MACAddress) then Wscript.Echo Nad.description, Nad.MACAddress
next"""
when using the scriptArgs you can either make a loop of them and send the string value of each one something like this
For (n = 0 .........
myArg = "myArg" & n
myStringToPassOver = "Shaddow Fax " & n
app.scriptArgs.SetValue myArg, myStringToPassOver
Next
or probably better to make a long comma or something else separated string and pass it over after the loop
var VBScript = """myArg = ""
For n = 0 To 15
myArg = myArg & "Shaddow Fax " & n & ","
Next
app.scriptArgs.SetValue "myResult", myArg
app.doScript(VBScript, ScriptLanguage.visualBasic);
var myResult = app.scriptArgs.getValue("myResult").replace(/\,$/,"").split(",");
// if neaded use "replace" to remove final "," and "split" to convert into an array
alert(myResult.join("\r")); // alert the array
The above script is a jsx script that runs a vbs
If you want a vbs script to run and access a string from from a jsx script then you would use xxx.DoScript see the sample from the manual below.
Set myInDesign = CreateObject("InDesign.Application")
myJavaScript = "alert(""First argument: "" + arguments[0] + ""\rSecond argument: "" +
arguments[1]);"
myInDesign.DoScript myJavaScript, idScriptLanguage.idJavascript, Array("Hello from
DoScript", "Your message here.")
myVBScript = "msgbox arguments(1), vbOKOnly, ""First argument: "" & arguments(0)"
myInDesign.DoScript myVBScript, idScriptLanguage.idVisualBasic, Array("Hello from
DoScript", "Your message here.")
P.s.Please mark the question as answered, thanks -
How to get the value from a database without submitting a jsp page
I have a jsp which has a text box depending on the value entered I want to get the value from a database for other two fields with out submitting jsp page. I am using struts.
Thanks For any assistance provided.Alright,here is an example for you for the first case.
Present.jsp:
============
<html:html>
<head>
<title><html:message key="page.title"/></title>
</head>
<body>
<html:form action="ChangeEvent.do">
<html:hidden property="method"/>
<!-- Submitting the Form onKeyUp of EmpId field and trying to save the
state of the Form in the scope of session -->
Emp Id:<html:text property="empId" size="5" onkeyup="if(true){this.form.elements[0].value='populateDetails';this.form.submit();}"/>
Emp Name:<html:text property="empName" size="10" />
Email Address:<html:text property="email" size="10" />
<html:submit>Submit</html:submit>
</html:form>
</body>
</html:html>struts-config.xml:
==================
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>
<!-- Form bean which stores the properties of all the Form elements -->
<form-beans>
<form-bean name="employeeFormBean" type="org.apache.struts.action.DynaActionForm">
<form-property name="empId" type="java.lang.String"/>
<form-property name="empName" type="java.lang.String"/>
<form-property name="email" type="java.lang.String" />
</form-bean>
</form-bean>
<action-mappings>
<action path="/ChangeEvent" type="Test.GetChangeAction" name="employeeFormBean" scope="request" parameter="method">
<!-- On successful call of DB the Page has to be forwarded to the same page again by
uploading updated form bean values. -->
<forward name="success" path="/Present.jsp"></forward>
<forward name="failed" path="/error.jsp"></forward>
</action>
</action-mappings>
</struts-config>GetChangeAction.java:
=====================
public class GetChangeAction extends DispatchAction{
public ActionForward populateDetails(ActionMapping mapping,ActionForm form, HttpServletRequest request, HttpServletResponse response) throws Exception {
DynaActionForm dForm = (DynaActionForm)form;
String empId = dForm.get("empId");
// calling Model / Db and then getting back Employee Details
EmployeeBean eb = ModelUtils.getDetails(empId);
// Updating form bean by updating values from the Model
dForm.set("empName".eb.getEmpName());
dForm.set("email".eb.getEmail());
return mapping.findForward("success");
}well to me this should work regardless to any browser but we need to make sure we put in our logic properly. -
Hi all,
I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
<snip>
11/05/14 08:50:48:184 | [INFO] | | | | | | | 5236 | **File download complete.**
11/05/14 08:50:52:145 | [INFO] | | | | | | | 3732 | **File download complete.**
11/05/14 08:51:05:327 | [INFO] | | | | | | | 1784 | **File download complete.**
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | The windows error code is - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | Failed to send the request to server to get the response - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
11/05/14 08:51:06:992 | [INFO] | | | | | | | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:51:11:514 | [INFO] | | | | | | | 6844 | incrementing the thread. now the active thread count is 2
11/05/14 08:51:12:519 | [INFO] | | | | | | | 6648 | **File download complete.**
11/05/14 08:51:16:541 | [INFO] | | | | | | | 6844 | decrementing the thread count. now the active thread count is 1
11/05/14 08:51:22:281 | [INFO] | | | | | | | 3452 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:51:29:022 | [INFO] | | | | | | | 1836 | **File download complete.**
11/05/14 08:52:22:381 | [INFO] | | | | | | | 7220 | incrementing the thread. now the active thread count is 2
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | The windows error code is - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | Failed to send the request to server to get the response - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
11/05/14 08:52:27:383 | [INFO] | | | | | | | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:52:27:663 | [INFO] | | | | | | | 4908 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:52:28:733 | [INFO] | | | | | | | 6064 | **File download complete.**
11/05/14 08:52:42:810 | [INFO] | | | | | | | 7220 | **File download complete.**
11/05/14 08:52:45:570 | [INFO] | | | | | | | 3788 | **File download complete.**
</snip>
There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.Hi all,
I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
<snip>
11/05/14 08:50:48:184 | [INFO] | | | | | | | 5236 | **File download complete.**
11/05/14 08:50:52:145 | [INFO] | | | | | | | 3732 | **File download complete.**
11/05/14 08:51:05:327 | [INFO] | | | | | | | 1784 | **File download complete.**
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | The windows error code is - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | Failed to send the request to server to get the response - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
11/05/14 08:51:06:992 | [INFO] | | | | | | | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:51:11:514 | [INFO] | | | | | | | 6844 | incrementing the thread. now the active thread count is 2
11/05/14 08:51:12:519 | [INFO] | | | | | | | 6648 | **File download complete.**
11/05/14 08:51:16:541 | [INFO] | | | | | | | 6844 | decrementing the thread count. now the active thread count is 1
11/05/14 08:51:22:281 | [INFO] | | | | | | | 3452 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:51:29:022 | [INFO] | | | | | | | 1836 | **File download complete.**
11/05/14 08:52:22:381 | [INFO] | | | | | | | 7220 | incrementing the thread. now the active thread count is 2
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | The windows error code is - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | Failed to send the request to server to get the response - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
11/05/14 08:52:27:383 | [INFO] | | | | | | | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:52:27:663 | [INFO] | | | | | | | 4908 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:52:28:733 | [INFO] | | | | | | | 6064 | **File download complete.**
11/05/14 08:52:42:810 | [INFO] | | | | | | | 7220 | **File download complete.**
11/05/14 08:52:45:570 | [INFO] | | | | | | | 3788 | **File download complete.**
</snip>
There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0. -
How do you get a RESPONSE from Verizon?
How does one get a response from Verizon? Here's my situation...
Given the amount of trouble that I have had with a recent order, you would think that I was trying to land a 747 jet on my roof. In reality, all I was aiming to do was to cancel the $19.99 per month phone service that I never used. I do not even own a phone, for that matter. I also had enhanced high speed Internet, and I wanted to retain the high speed Internet. A few days before January 13, 2012, I called Verizon and spoke to the 1st sales representative, who ensured me that it was no problem to cancel the phone service and yet retain the high speed Internet for the same monthly price. 24 hours later, my high speed DSL service was no longer functioning. I will try to briefly explain the disastrous customer service that ensued.
The first several phone calls to Verizon were not productive as I was transferred to the wrong department, and then at least one of my phone calls was dropped by the Verizon server. The representative did not call me back. I finally got in touch with a technical support representative, the 2nd Verizon representative, who informed me that the high speed Internet had been turned off and that I had to speak to a sales representative to solve the issue. Another sales representative, the 3rd Verizon representative, informed me that the 1st representative had cancelled my phone line, and thus cancelled all of my services. Great. The 3rd representative informed me that he was absolutely capable of handling the problem and that he would simply add a new order for high speed Internet, which was to be activated the next morning. The next morning came and went, and guess what? No Internet. I called again. The 4th Verizon representative told me that everything that had been done previously was incorrect and that the sales department is not capable of making such changes. She told me that she could not help me and that my claim had to be submitted to a different department, which has the authority to un-do all of the previous changes. She told me that I would receive a call back the same day to resolve the issue. Given my previous experiences with Verizon, I was confident that I would not, in fact, receive a call back and so I asked her how I could get transferred to this department, if I needed to call again. She said that I could not be transferred. Okay. So then I asked her what to ask for so that next time I called, I could be transferred to the correct department without dealing with yet another sales representative who gives me yet a different story. She informed me that she could not provide that information to customers. The Department That Shall Not Be Named (and that I cannot contact) did not call me, and I was not surprised. Unfortunately, I did not know how to go about contacting them, because, as I was told, customers aren’t allowed to do that.
The 6th phone call to Verizon was dropped by the Verizon server. The 7th phone call to Verizon went to the 5th Verizon representative, a sales associate who placed us on hold for the first 15 minutes only to inform us that she could not find any record of our Internet service. What the heck was she doing, checking her Facebook account? She finally returns, puts us on another extended hold, and then adamantly tells us that we need to speak with technical support, which, if you recall, was the first Verizon party that I spoke at the beginning of this debacle. The 5th representative transfers me again to technical support. Of course, the technical support personnel, the 6th Verizon representative said what the first one did, that the account was inactive and that we needed to talk to the sales department. My husband was on the phone at this point because I was DONE. When the 6th technical support representative tried to transfer him back to the sales department, my husband insisted that the 6th technical support representative remain on the line while we spoke to yet another sales representative, the 7th Verizon representative. The 6th technical support representative patiently waited with us while we sat in yet another long queue to speak with a member of the sales department.
The 7th sale representative, from the retention department based out of New Jersey, found that all previous orders had been set up erroneously. She cancelled the old orders and reinstated a completely new order. The DSL began working a few days later. MAGIC. She then left me a voicemail message saying that she would eliminate the activation and shipping fee (duh) as I never canceled the account to begin with and as I already had the equipment. She also applied a coupon to reduce the price to around $30 per month, assured for the next 2 years. I was relieved.
You can imagine our frustration then when we received the bill for $79 on February 6, 2012, which included a much higher monthly rate (around $45) and the shipping and activation fee of $19.99 that we were assured we would not pay. Again, nothing was shipped to us because we already had the equipment.
Our next phone call to Verizon landed us with a guy, the 8th Verizon representative, who had no intention of helping us. According to him, there was no record of these wrongs, and despite the fact that we had an old account number and three order numbers that were screwed up, he did not deem that there was enough evidence to change our monthly bill. (Unfortunately, the 7th Verizon representative did not make notes or appropriately document the situation on the new account.) The 8th Verizon representative then had the audacity to comment that we could be lying to him, yet he was unwilling to view the evidence that we could have presented. Instead, he suggested that we call tech support again and try to go through the same process to get connected to the mysterious “retention department” which he knew nothing about.
At this point, I was beyond fed up. The attitude of the 8th Verizon representative put me over the edge. I filed a complaint with the Better Business Bureau (BBB) with an abbreviated version of this story. I did not file the complaint to get back at Verizon. Instead, I filed the complaint because I knew that another phone call to Verizon would be useless. I’ve been dealing with this issue for over a month, and I’m sick of it. I have better things to do with my time, believe it or not, and this situation has resulted in a significantly waste of my time over what, in my opinion, was a very simple issue to resolve.
The BBB processed the complaint and I was contacted last Friday afternoon by a Verizon representative (the 9th) who said that she was looking into the matter and that she would respond to me within two to three business days. Well, it’s almost the end of the week, and I have received no response. Again, after all of this, how could I be surprised?
I have been a Verizon customer, wireless and residential, for as long as I can remember, but I am reaching the point of outrage. This situation is truly unacceptable.
You would think that, in 2012, with all of the technology available to us and the fact that Verizon is a COMMUNICATIONS COMPANY, that at least Verizon employees would be able to make a basic change to an existing order and that at least one out of 9 Verizon representatives would be able to solve this issue in a span of over four weeks. Think again.
How does one get a response from Verizon?dougiedc wrote:
It boggles the mind. The Verizon store on L Street downtown Washington, D.C. cannot access my Verizon account. They can only sell cellphones then it's up to me to contact Verizon on my own to get the hook up. I even asked "Are you Verizon employes? Is this a vendor store or is it really a Verizon owned and operated store?" The answer "Yes, we are Verizon employes, yes this is a Verizon owned and operated store" ...
Yes, it indeed boggles the mind. I'm of course referring to the fact that your post concerns Verizon Wireless products and services. This forum is dedicated exclusively to Verizon Communications services. As you probably know, Verizon Wireless and Verizon Communications operate as separate companies.
If you need help for a Verizon wireless product or service, it's best to direct questions to the Verizon Wireless forums. You can reach them by clicking on "Wireless" (either here or at the top of the page).
Good luck and I sincerely hope you get your issue resolved. -
How to get the selectedIndex from a combobox made by classFactory?
Dear All,
I am trying to get the selectedIndex or selecetedItem.banda_id when changing a combobox that is created by classFactory and it is inside a datagrid.
The code I have is:
MXML:
<mx:DataGrid width="100%" height="100%" id="salas_fin_dg" editable="true">
<mx:columns>
<mx:DataGridColumn headerText="Titulo" dataField="titulo" editable="false" width="250"/>
<mx:DataGridColumn headerText="Data" dataField="start_dt" editable="false"/>
<mx:DataGridColumn headerText="Dur" dataField="duration" editable="false" width="40"/>
<mx:DataGridColumn headerText="Banda" dataField="banda_nome" editable="true" itemEditor="{combofac}"/>
<mx:DataGridColumn headerText="$ Ensaio" dataField="total_ensaio" editable="true" itemEditor="controls.NumericInput"/>
<mx:DataGridColumn headerText="$ Bar" dataField="total_bar" editable="true" itemEditor="controls.NumericInput"/>
<mx:DataGridColumn headerText="$ Loja" dataField="total_loja" editable="true" itemEditor="controls.NumericInput"/>
<mx:DataGridColumn headerText="$ CC" dataField="total_cc" editable="true" itemEditor="controls.NumericInput"/>
<mx:DataGridColumn headerText="$ CH" dataField="total_ch" editable="true" itemEditor="controls.NumericInput"/>
<mx:DataGridColumn headerText="$ DI" dataField="total_di" editable="true" itemEditor="controls.NumericInput"/>
<mx:DataGridColumn headerText="$ Pend" dataField="total_pend" editable="true" itemEditor="controls.NumericInput"/>
</mx:columns>
</mx:DataGrid>
Script:
private function getSalasFinHandler(event:ResultEvent):void
salas_fin_lst = new ArrayCollection(event.result as Array);
salas_fin_dg.dataProvider = salas_fin_lst;
myservice.getBandas();
combofac=new ClassFactory(ComboBox);
combofac.properties={dataProvider:bandas_lst, labelField:"banda_nome", prompt:"Selecione"};
I am using Remote Object to get the data from a DB, and it is working properly.
As I will update the datagrid cell values, I would like to update them on the DB.
In order to do that, I would need to access the banda_id value, that is part of the combofac dataprovider, I mean that this dataprovider has 2 columns, being banda_nome and banda_id.
The question is how to get the banda_id value, when I change the comobobox?
Many thanks in advance,
GinesDear harUI and kolinitcom,
Thanks for the your prompt response and guidelines.
I went to research a little bit more on the itemEditEnd and found a way to access the data inside the combobox.
The code for all application goes below. If you click on the button, it will show you all the datagrid data, plus the ID of the combobox when changed.
Thanks again,
Gines
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
layout="vertical"
verticalAlign="middle"
backgroundColor="white" initialize="init();">
<mx:Script>
<![CDATA[
import mx.utils.ObjectUtil;
import mx.controls.ComboBox;
import mx.controls.Alert;
import mx.events.DataGridEvent;
import mx.events.*;
[Bindable]
private var combofac:ClassFactory;
public var newVal:String;
private function init():void
combofac=new ClassFactory(mx.controls.ComboBox);
combofac.properties={dataProvider:arrcombo, prompt:"Selecione", labelField:"label"};
public function getCellInfo(event:DataGridEvent):void {
var myEditor:ComboBox = ComboBox(event.currentTarget.itemEditorInstance);
newVal = myEditor.selectedItem.data;
public function mostra():void
var dados:Object = new Object;
dados.nome = dataGrid.selectedItem.label;
dados.score = dataGrid.selectedItem.score;
dados.score_id = newVal;
Alert.show(ObjectUtil.toString(dados));
]]>
</mx:Script>
<mx:TextArea id="cellInfo" width="300" height="150" />
<mx:ArrayCollection id="arrcombo">
<mx:source>
<mx:Array>
<mx:Object label="1" data="A1"/>
<mx:Object label="2" data="A2"/>
<mx:Object label="3" data="A3"/>
<mx:Object label="4" data="A4"/>
<mx:Object label="5" data="A5"/>
<mx:Object label="6" data="A6"/>
<mx:Object label="7" data="A7"/>
<mx:Object label="8" data="A8"/>
<mx:Object label="9" data="A9"/>
</mx:Array>
</mx:source>
</mx:ArrayCollection>
<mx:ArrayCollection id="arrColl">
<mx:source>
<mx:Array>
<mx:Object label="Student A" score="8" />
<mx:Object label="Student B" score="4" />
<mx:Object label="Student C" score="7" />
<mx:Object label="Student D" score="8" />
<mx:Object label="Student E" score="2" />
<mx:Object label="Student F" score="6" />
<mx:Object label="Student G" score="7" />
<mx:Object label="Student H" score="7" />
<mx:Object label="Student I" score="9" />
<mx:Object label="Student J" score="8" />
<mx:Object label="Student K" score="4" />
<mx:Object label="Student L" score="7" />
</mx:Array>
</mx:source>
</mx:ArrayCollection>
<mx:DataGrid id="dataGrid"
dataProvider="{arrColl}"
editable="true"
rowCount="8"
itemEditEnd="getCellInfo(event);">
<mx:columns>
<mx:DataGridColumn dataField="label"
editable="false" />
<mx:DataGridColumn dataField="score"
editable="true"
itemEditor="{combofac}"/>
<mx:DataGridColumn headerText="Salvar" width="50">
<mx:itemRenderer>
<mx:Component>
<mx:VBox width="100%" height="100%">
<mx:Button label="See the values" click="outerDocument.mostra();"/>
</mx:VBox>
</mx:Component>
</mx:itemRenderer>
</mx:DataGridColumn>
</mx:columns>
</mx:DataGrid>
</mx:Application> -
Need how to get the data from the external file in eCatt
Hi ,
Could any body suggest how to get the values from the external file(Excel,CSV file,Text file) and pass it as varaiable in ecatt Test script.
Problem: Need to execute FK01-Vendor creation Transaction with multiple set of data .As per my understanding we could achive through Variants in Testdata set in eCatt .
But is there any way to store the data in excell file and get the data and pass it to FK01 Test scripts
Appreciate response on thisHi
See the links they may be useful
check these link,
eCATT- An Introduction
/people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
Creating Test Scripts
/people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
eCATT Logs
/people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
eCATT Scripts Creation TCD Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
Creation of Test Data Container
/people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
eCATT Scripts Creation - SAPGUI Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
Integrating ECATT & MERCURY QTP Part -1
/people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
Using eCatt to Test Web Dynpro ABAP
/people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
and
-command reference
http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
/people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
http://prasadbabu.blogspot.com
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
http://www.erpgenie.com/ecatt/index.htm
hope this helps.
Reward points for useful Answers
Regards
Anji -
I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol
Hi there,
Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
Recovery Mode and Restore - Apple
Let me know if this helps,
Nathan -
Can't get any response from HttpsURLConnection
sorry, i've reformat the code here again
Deal frens,
Currently i'm doing a code to get a response from https link in my servlet. I don't know where the lack of my coding, but i don't get any response from the server when i execute my code. here is my code
import java.io.*;
import java.net.*;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.net.ssl.*;
public class Servlet1 extends HttpServlet {
private static final String CONTENT_TYPE = "text/html";
//Initialize global variables
public void init() throws ServletException {
//Process the HTTP Get request
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
response.setContentType(CONTENT_TYPE);
PrintWriter out = response.getWriter();
String authentURL = "https://server1.tst.cvs/servlet/RequestHandler?login=admin&pwd=admin&method=viewUser&username=00032a0183db";
out.println("<html>");
out.println("<head><title>Servlet1</title></head>");
URL url = new URL(authentURL);
HttpsURLConnection URLconn = (HttpsURLConnection) url.openConnection();
// HttpsURLConnection conn = null;
URLconn.setDoInput(true);
URLconn.setDoOutput(true);
URLconn.setRequestMethod("GET");
URLconn.setUseCaches(false);
OutputStream authOut = URLconn.getOutputStream();
BufferedReader reader = new BufferedReader(new InputStreamReader(URLconn.getInputStream()));
out.println("<body bgcolor=\"#ffffff\">");
out.println("<p>The servlet has received a GET. This is the reply.</p>");
out.println("output"+authOut);
out.println("output2"+URLconn.getContent().toString());
out.println("output3"+reader);
out.println("</body></html>");
//Clean up resources
public void destroy() {
} the result suppose i get when i execute the script is..
userdata=234&uname=00032a0183db&concurrentlogins=1
i don't have any problem when i paste the link
https://server1.tst.cvs/servlet/RequestHandler?login=admin&pwd=admin&method=viewUser&username=00032a0183db
and i able to get the response
userdata=234&uname=00032a0183db&concurrentlogins=1
please..please help..what is wrong with my codeYOU DON'T READ ANYTHING IN YOUR CURRENT CODE !!!
If you use a BufferedReader, then read the input stream via readLine() method.
Default implementation of getContent() method is not generally usable for getting your desired "content". Experiment that. -
RFC - XI - WebService :: Not getting complete Response from WS
Hi
I am working on a following Synchronous scenario
<b>SAP R/3 --> Sender RFC Adapter --> XI --> Rec. SOAP Adapter --> MI Web Service</b>
Now I tested the structure of Request/Response Message from WebService in XML Spy, & designed my Request/Response Message structure in XI based on that.
Now when I am sending the request from <u>XML Spy</u>,the Response message which is coming is this -->
<i><?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<ns1:getResponse soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns1="http://www.MI/util">
<getReturn href="#id0"/>
</ns1:getResponse>
<multiRef id="id0" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="ns2:AddressDTO" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns2="http://to.MIutil.com">
<latitude href="#id1"/>
<longitude href="#id2"/>
<postcode xsi:type="soapenc:string">111</postcode>
<state xsi:type="soapenc:string">XYZ</state>
<streetName xsi:type="soapenc:string">NYDEL</streetName>
<streetNumber xsi:type="soapenc:string">444</streetNumber>
<streetType xsi:type="soapenc:string">ST</streetType>
<suburb xsi:type="soapenc:string">SQY</suburb>
</multiRef>
<multiRef id="id1" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="xsd:double" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">-33.87571285585008</multiRef>
<multiRef id="id2" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="xsd:double" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">51.20783220341076</multiRef>
</soapenv:Body>
</soapenv:Envelope></i>
{ <b>Pls. take note that it is referring variables</b>}
But when I am sending the Request from SAP R/3 <u>using SAP XI</u>, I am getting the Response message from WebService like this -->
<i><?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <ns1:getResponse xmlns:ns1="http://www.MI/util" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<getReturn href="#id0" />
</ns1:getResponse></i>
which suggest that operation is getting called successfully & response is coming back.
Can you tell me what is the reason that why I am not getting the rest of the response .
Regards
- Lalit Chaudhary -Hi,
Yes it can be possible, you have to maintain SOAP Header.
please see the below links..
How to extract XI-header fields from XI-message in JAVA?
/people/sap.user72/blog/2005/12/11/how-to-apply-themes-in-exchange-infrastructure
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c50cddbb-0601-0010-92a7-f2a40ca68e6d
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=href%20%20in%20xi&cat=sdn_all
Regards
Chilla..
Maybe you are looking for
-
File to SOAP and SOAP to File (Synchronous)
Hi, Can anybody advice me how to do the File to SOAP and SOAP to File with Synchronous call. Thanks, Naidu.
-
Where is the WLSTUtil API documentation
I've been playing around with Python/Jython and WLST. But I cannot seem to find the API for the WLST commands. I can get code completion in eclipse that gives me all the possible commands for a certain variable for a dataSource say. But where are the
-
Best setting for K7N2-L and 3000+ (333FSB)
I am kind of new to the overclocking world. I have the following setup: 500 Watt ATX power Supply K7N2-L Motherboard w/400mhz FSB AMD XP 3000+ Barton Core at 333 FSB 1Gb (2x512) Generic PC3200 DDR SDRAM (400 FSB) I also have Nvidia FX 5600 w/ 256mb D
-
"Quicktime is not installed on this system"
It's a snow day, I'm supposed to be working from home and I just downloaded AE CC so I can do some work. Prior to this, I only had AE 5 on this iMac (running OS 10.9.5), but AE CC is refusing to open without trouble. I've tried these solutions: solut
-
Smartforms: new barcodetechnology - additional (rotated) Text
Dear community, I've a small problem while designing a new smartform form. I want to print a code 128 and I already created it with SE73 as a "system barcode" and I also chose the "new barcode technology" and as alignment "rotated". In my form I def