Getting time interval in seconds

How do I get the time interval between two date ( i.e to_date - from_date) in seconds ? The date range can span across several days , even months . I need to order the rows according to this interval, hence able to get the difference in seconds will help.

This information can be useful for you :
MONTHS_BETWEEN returns number of months between dates date1 and date2. If date1 is later than date2, then the result is positive. If date1 is earlier than date2, then the result is negative. If date1 and date2 are either the same days of the month or both last days of months, then the result is always an integer. Otherwise Oracle calculates the fractional portion of the result based on a 31-day month and considers the difference in time components date1 and date2.
Examples
The following example calculates the months between two dates:
SELECT MONTHS_BETWEEN
(TO_DATE('02-02-1995','MM-DD-YYYY'),
TO_DATE('01-01-1995','MM-DD-YYYY') ) "Months"
FROM DUAL;
Months
1.03225806
Joel P�rez

Similar Messages

  • Time stamp dropping seconds

    I figure someone has had this problem before but didn't see it in the forum anywhere.  I'm adding a time stamp to a file so I've used the "Get Time/Date in Seconds" and wired that to a "Convert to DBL".  This then wires both into an indicator on the Front Panel and into the "Write to Measurement File" Express VI.
    The indicator displays the time stamp just fine but in the file it puts it into scientific notation and cuts off the last 4 digits as well as any fractional seconds.  The time stamp writes to the file every 5 seconds so it is important to have the rest of the time stamp included.  I've tried using probes on the wires to see where things go weird but I get the same truncated value in the wire before and after the indicator.  I thought it had something to do with the Express VI first since the indicator is fine but with it truncated in the wire it seems that the Express VI is indeed saving exactly what is handed to it...but then again the indicator...you can see I've been running in circles over this!  Does anybody know the reason it is doing this and a possible solution?
    Thanks a lot!
    Solved!
    Go to Solution.

    I can't post the exact code because it is being developed for use outside our lab but I've recreated the basics of the problem.  The array would be the collected data and except some filename details and things like that everything relevant to the time and saving is included.  Also settings in the express VI are the same.  Not sure if it will help out.
    Attachments:
    example.vi ‏56 KB

  • New Cost center Time-interval getting deleted automatically in Asset master

    Hi Friends,
    While changing the cost center in the asset master data with a new time interval, the check-box 'Deletable' gets automatically ticked and the new interval gets deleted and the new cost center is updated in the old time interval. The check-box is greyed out and cannot be edited.
    The right-most check-box in the 'More Intervals' button in the second tab of the asset master is the 'Deletable' check-box (Field Name: RA02S-XDEL).
    Please help me to make the check-box editable or help me to remove the default tick in the check-box.
    Regards,
    Shilpi

    Hi Murlidhar,
    Thanks a lot for the response.
    If the check-box gets deselected when we press the 'Save' button, still the new interval is getting automatically deleted.
    Earlier this was not happening, the new and the old interval was getting displayed separately. There are instances in the system, where both old and new interval is displayed.
    Of late, we notice that the new interval is getting deleted as soon as we save it.
    Please help to retain both the intervals.
    Regards,
    Shilpi

  • I was today invited to upgrade my iTunes when I logged on.  Update failed. Every time I now try to open iTunes I get error messages.  Second message reads "iTunes was not installed correctly. Please re-install iTunes. Error 7. Windows error 126"

    I was today invited to upgrade my iTunes when I logged on.  Update failed. Every time I now try to open iTunes I get error messages.  Second message reads "iTunes was not installed correctly. Please re-install iTunes. Error 7. Windows error 126". I now can't sync my iPhoneand I am worried that if I re-install I will lose all my contacts,calendar, notes, etc.

    I too had this problems (Windows 8.1).  A few weeks ago after the previous update before this version of itunes, I'd had a problem with the itunes store crashing and at that time I followed instructions to copy QTMovieWin.dll to the itunes folder, which fixed the store crashing.
    Today I fixed the problem by:
    Delete QTMovieWin.dll from C:\Program Files (x86)\iTunes.
    Uninstall ALL Apple Software using Control Panel / Programs and Features.  I uninstalled:
    iTunes
    QuickTime
    Apple Mobile Device Support
    Apple Application Support
    Apple Software Update
    Bonjour
    Delete the folders:
    C:\Program Files (x86)\iTunes
    C:\Program Files (x86)\Common Files\Apple
    Restart the computer
    Reinstall QuickTime
    Reinstall iTunes
    Everything works GREAT now, including the iTunes store.  You will not lose your media files, I got everything back, all my settings, playlists, etc.

  • As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.  If someone is calling me during that time it says mobile is either switched off or outsid

    As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.
    If someone is calling me during that time it says mobile is either switched off or outside the coverage area.
    Please help

    You may need to force it into recovery mode. See here: https://discussions.apple.com/message/17766427#17766427

  • I need to get the system time in Micro second

    Hi,
    In the java API there is a static method �curentTimeMillis�, but I need
    to get the system time in Micro second there is a equivalent method? Or
    there exists any suggested solution?
    Thanks
    Dany

    Why do you need such accurate timing ?
    I'd be suprised if anyone seriously relies on millisecond timing in
    Java, never mind calling through to JNI to get microsecond timing.
    If that's even possible in native code.
    The garbage collector can cause delays/pauses in a java program and
    throw timings off by at least 500 milliseconds, probably more under big loads.
    If you just want a more accuruate way to reset a random seed, there's probably other ways...
    regards,
    Owen

  • Set the time interval when BPM read e-mail to get offline adobe forms

    Hi masters
    Do you know where I can set the time interval when the BPM read the e-mail account to get the off-line adobe forms received ? I think it is 10 minutes but I need to change to 1 minute.

    there is a config attribute

  • Setting the time interval for LEDs

    hello I am new to labview, I am trying to do something simple, but made it a lot more complicated than it needs to be. I need turn on an LED and turn it off, but in random intervals, such as turn it on for 1 second, then turn it off for 2 seconds, then turn it on for 2 seconds, then turn it off for one second, so no real pattern. I need to do this to the LED for a minute, I tried a really convoluted method with a time target and case strictures, but I can only program that to activate in specific intervals, I am not able to set them. Any help will be greatly appreciated. Here is a VI of my convoluted method that didn't work.
    Attachments:
    LED time interval test.vi ‏43 KB

    You have not tried to implement altenbach's suggestion of autoindexing an array of delays.
    The Reshape Array needs to be outside the for loop. You want to reshape the 3x4 2D array into a 12 element 1D array.  What you are doing is reshaping a 3 element 1D array into a 12 element 1D array. This results in the last nine elements always = zero.
    The Arduino expects an 8-bit unsigned integer. So the data in the arrays should also be U8.
    If the index to Replace Array Subset is negative or greater than the maximum index in the 2D array, it does nothing.  I am not sure exactly what you are trying to do with the array index manipulations so I did not try to fix it.  I added some indicators to show what is happening.
    When using autoindexing on a for loop, do not also wire to N.
    The Arduino Rseource wires and the error wires should be connected through the loop boundaries with shift registers, not tunnels, particularly not autoindexing tunnels.
    I do not have an Arduino, so I used Diagram Disable structures to disable the Arduino VIs for testing without getting errors.
    You seem to be allergic to straight wires. Actually the auto wiring tool is probably on and IT is allergic to straight wires.  I find it easier to understand a block diagram where the wires do not have excessive bends.
    Lynn
    Attachments:
    Project 1 with arduino.2.vi ‏23 KB

  • [svn:osmf:] 11045: Increasing timer interval in attempt to fix unit test on the build server.

    Revision: 11045
    Author:   [email protected]
    Date:     2009-10-21 02:32:45 -0700 (Wed, 21 Oct 2009)
    Log Message:
    Increasing timer interval in attempt to fix unit test on the build server.
    Modified Paths:
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/composition/TestParallelViewableTrai t.as

    In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
    That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
    Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
    Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
    While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
    Hunt

  • Console spam: "com.apple.time: Interval maximum value"

    Hi, everyone —
    Getting a little obsessed about cleaning out unnecessary Console messages and I'm finding that ~50% of my messages is this exact line:
    com.apple.time: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    I get this line about once a minute, and at the top of the hour get it almost a hundred times, ie:
    6/6/13 8:59:59.991 AM com.apple.time[161]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    6/6/13 8:59:59.994 AM com.apple.time[161]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    6/6/13 8:59:59.996 AM com.apple.time[161]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    6/6/13 8:59:59.998 AM com.apple.time[161]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    6/6/13 9:00:00.001 AM com.apple.time[161]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    6/6/13 9:00:42.568 AM com.apple.time[161]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    6/6/13 9:01:33.575 AM com.apple.time[161]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    Anyone know how to clean this up?

    Ok, after digging a bit, I've found what cause this warning: the DOT @ the end of the NTP server name... I thing it is used to specify the interval from the GUI, but without a value (i.e. Apple, Europe, (time.euro.apple.com.)) it probably fall to the maximum signed int64 value.
    If you trim that dot or specify a value after the dot, the warning goes away.
    Moreno
    Edit: I now have these console errors... sandbox...:
    07/08/14 10:06:33,415 sandboxd[158]: ([196]) ntpd(196) deny file-read-data /private/var/run/resolv.conf
    07/08/14 10:06:33,419 sandboxd[158]: ([196]) ntpd(196) deny file-read-data /private/var/run/resolv.conf
    07/08/14 10:08:35,827 sandboxd[158]: ([196]) ntpd(196) deny file-read-data /private/var/run/resolv.conf
    07/08/14 10:08:35,831 sandboxd[158]: ([196]) ntpd(196) deny file-read-data /private/var/run/resolv.conf
    07/08/14 10:12:37,845 sandboxd[158]: ([196]) ntpd(196) deny file-read-data /private/var/run/resolv.conf
    07/08/14 10:12:37,849 sandboxd[158]: ([196]) ntpd(196) deny file-read-data /private/var/run/resolv.conf

  • Io exception: Connection reset - after some time interval

    Hi,
    We are facing a problem in connection while implementing connection pooling using OracleDataSource .
    Application is running with out any issue if it is called continuously.
    If we call the application after some time interval, connection is being reset. We are able to get the connection instance but connection reset exception is thrown while calling callableStatement.execute().
    If application called after application restart it is working fine.This issue is happening only for the first few calls made after some time interval.(after 1 hr)
    After that call is proceeding without any issue.
    Environment Details
    Application is accessing 4 oracle databases and the versions are viz., 9.2.0.8,10.2.0.3,10.2.0.4 and 9.2.0.1.
    Driver : ojdbc14.jar
    App Server : tomcat
    jdk version: 1.5
    OracleDataSource is being used for connection pooling.
    propCache.setProperty("ConnectionWaitTimeout",10); // caching parms
    ods.setConnectionCachingEnabled(true);
    ods.setLoginTimeout(intLoginTimeout);
    propCache.setProperty("MinLimit","5");
    propCache.setProperty("MaxLimit", "20");
    propCache.setProperty("InitialLimit","5");
    propCache.setProperty("ValidateConnection", "true");
    propCache.setProperty("AbandonedConnectionTimeout", "10");
    The exception details are as follows
    java.sql.SQLException: Io exception: Connection reset
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
    at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:987)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1170)
    at oracle.jdbc.driver.OracleStatement.doScrollExecuteCommon(OracleStatement.java:4043)
    at oracle.jdbc.driver.OraclePreparedStatement.doScrollPstmtExecuteUpdate(OraclePreparedStatement.java:10826)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3337)
    at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3445)
    at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4394)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
    at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:834)
    at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:640)
    at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1286)
    at java.lang.Thread.run(Unknown Source)
    Any suggestion to resolve this issue is greatly appreciated.
    Thanks.

    Hi,
    try to utilize OracleDataSource#setConnectionCacheProperties() with property InactivityTimeout equals to 1800 (30 minutes in seconds).

  • How to get different value in second view of webdynpro?

    hello guys,
    In ABAP webdynpro I am trying to create one application having two views.
    One view contains input field and another view contains table control.
    In module pool if one screen contains input field then second screen display the details in table as per the selection criteria in first screen,same way here in first view what ever I will enter as per the selection details should get display in the table.
    Now I have created the application  and now I am executing the application.
    Here in first view in input field  I am entering the selection criteria and when I am nevigating to second view it desplaying the details what I want in the table but now I am having one more pushbutton to nevigate to first view again and I am trying to enter the value but this time in the second view in the table it showing me the same details what there was in previouse details.
    Can anybody please help me out?

    Hi
    YOu can use it in WDDOINIT Method associated with the VIEW just go to attribute tab and
    IF_FLIGHT_VIEW double click on this Interface you will get all the methods.
    Don't worry about all these methods.
    Use Web Dynpro Code Wizard to get the required Declarations ( Hope you did it already) .
    your element instance combined with the method Name.
    For reference take the help of  WDR_TEST_UI_ELEMENTS.
    Cheer and Happy Diwali
    Ram

  • Reducing the time interval in file Adpt to write a flat file at a location

    Hi All,
    I hav a scenario where i hav to write a flat file (<b>XXX.txt</b>) to a location. b4 doing that, i hav to check whether <b>XXX.txt</b> already exists or not. If it doesn't exists then i hav to write the <b>XXX.txt</b> file there. if it already exists, then i hav to wait until that <b>xxx.txt</b> file gets deleted.
    In the receiver file adapter v hav an option <b>file construction mode = <u><i>create</i></u></b> which does the same thing. but the problem here is it is taking too long (<b>more than 5 min</b>) which is not at all acceptable in my case (it is ok <b>if it takes 1 min</b>).
    Is there any way to <b>reduce the time interval</b> using the same option?
    Or do we hav any <b>work around solution</b> for acheiving the same scenario?
    any help wud b appreciated.
    Thnx in Adv.
    Anil

    Anil
    As far as my knowledge goes I think it is not possible because we are not going to do anything from our end. XI is doing processing and creating a file for you. But you might be sending a large file at a time. So you have to improve the performance in your scenario. You check this urls on how to improve performance in XI:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
    Improving performence in XI
    Maximum Permitted File Size in XI
    ---Satish

  • Cannot get Time Machine to work

    I just installed Leopard on my Power MacG4. I can't get Time Machine to work. I have gone to Utilities and repaired partitions twice. That doesn't seem to be the problem. I have no idea what to do. Any ideas?

    Pondini wrote:
    Maybe, maybe not. Via Disk Utility, when you click the first line for the drive (Make, Size), does it show the +Apple Partition Map+ down near the bottom, and when you click the second line, show +Mac OS Extended (journaled)?+ If not, that's at least part of the problem.
    There should be better messages in your logs. Download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to the failed backup, then copy and post the messages here (be sure to get them all, as sometimes they overflow the small window).
    Checked the disk utility and everything shows as you say it should. Here's the log:
    Starting standard backup
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Backup content size: 35.1 GB excluded items size: 144 KB for volume Macintosh HD
    No pre-backup thinning needed: 42.14 GB requested (including padding), 931.15 GB available
    Error: (-36) SrcErr:NO Copying /Adobe Acrobat 3.0/Acrobat™ Distiller™ 3.01 to /Volumes/Time Machine Backups/Backups.backupdb/Kathy Miller’s Computer/2009-03-08-153448.inProgress/62856C2A-1F0A-438D-925C-B5A18D6E5416/Maci ntosh HD/Adobe Acrobat 3.0
    Stopping backup.
    Error: (-8062) SrcErr:NO Copying /Adobe Acrobat 3.0/Acrobat™ Distiller™ 3.01 to /Volumes/Time Machine Backups/Backups.backupdb/Kathy Miller’s Computer/2009-03-08-153448.inProgress/62856C2A-1F0A-438D-925C-B5A18D6E5416/Maci ntosh HD/Adobe Acrobat 3.0
    Copied 0 files (2.7 MB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11

  • What is a fast way to drive a HP53132A counter to do real time, "time interval" measurements?

    Right now I run my system on a simple PCI GPIB bus. The fastest I can the time interval measurement is at 100 Hz. However, the has 350 ns timing and the PC running the program is much faster than this. So I should be able to achieve a rate of at least 10 kHz (depending on the counter of course). Do you have any suggestions for the way to set up the counter for the fastest measurement?

    I think that you're running into a limitation of the counter itself. My manual for the 53131 says that it can can do a maximum of 200 GPIB measurements per second. I think that the 53132 is similar except for extended resolution. What you might try is the STATS mode where you command the counter to take a number of measurements and then calculate the statistic. It is generally fster to let an instrument do a series of measurements and accumulate the results than to try and transfer one measurement at a time over the GPIB bus. VXI, PCI, PXI instruments can do things a lot faster so that might be an option as well. You should also be aware that your rate of 10 kHz requires timing resolution greater than what is in a PC (a PC has 1 msec resolution at best a
    nd it's not deterministic at all) so if you need something accurate, you'll have to use external hardware timing.

Maybe you are looking for

  • Final Cut is Crashing--Will not Open

    OK, I have repaired permissions, trashed preferences, unloaded all the audio plugins (mostly because they take forever when FCP opens), and finally reinstalled FCP Studio 2. The only thing on my startup disk is OSX SL and programs. I always work off

  • How do I copy music files from an iPod 5thGen to a new iTunes installation?

    My old WinXP computer crashed & burned (literally). I installed iTunes (11.2.2.3) on my new Win7 PC. How do I copy all my music from my 5th Gen iPod into the new iTunes? My music collection contains only MP4 files ripped from my CD collection--nothin

  • Unable to open PDF files from website

    hi friends, I am using iPad Air and iOS 7.1.2. When I tried to open PDF files from below site in safari, http://www.iar.com/Products/IAR-visualSTATE/User-guides/ ftp://ftp.iar.se/WWWfiles/vs/QuickStartTutorial.pdf it shows error as "Safari can not op

  • Can I specify the "root package" of the Library?

    Can I specify the "root package" of the  Library (currently seemingly hardwired as "components") so that the  generated code has sensible package names i.e.  "com.adobe.buttons.HelloWorldButton" rather than  "components.HelloWorldButton".

  • Dump - DYNPRO_NOT_FOUND

    Hi, I tried to created a "Request for Quotation" but system hangs with the following error: Runtime Errors         DYNPRO_NOT_FOUND Date and Time          12.11.2008 10:45:56 Short text      Dynpro does not exist What happened?      Error in the ABAP