GetURL:javascript blocked when called from a frame action in flash?

Hi,
I'm wrapping a load of flash/html eLearning content into air
packages - or at least I was!
The content is really old - flash 6 - and part of how it
works is once it has loaded, it calls a javascript function, via a
frame action. Each eLearning module relies on this call getting
made...
Sadly, this javascript call is never received - and having
done a test it is purely down to the call being from a frame rather
than a button (or other user interaction).
eg. a movie with 10 frames. frame 10 has this action:
(remember this is flash 6!)
stop();
getURL("javascript:foo());
foo is never called.
But put a button in with:
on(release){
getURL("javascript:foo());
that works fine. Same call, but via a button.
So really the question is - with air (or even is it something
in new flash security?) - is there some reason why a frame action
cannot call javascript? And if so - is there a parameter that can
be set (like allowScriptAccess type thing - although tried that!)
that will allow it again? Basically with over 1000 different flash
movies, I'm not really in a position to re-code (eg.
ExternalInterface does work! But can't recode 1000 movies to use
that!).
I've searched and can't see anything saying specifically a
frame action call to javascript will be ignored, but clearly it
is...
Any idea, anyone?
Thanks.

You are calling the script while the mouse button is still
down-- a
hijacking truck.
While it still works in older/unpatched IE, Microsoft has
disabled
resizeBy/To and moveBy/To while the mouse button is down.
Obviously, when
you have to click the Alert dialog's OK button, the mouse is
no longer down.
You'll need to take a different approach.

Similar Messages

Stored Procedure Does Not Run Properly When Called From Portlet

We have a simple Java portlet that calls a PL/SQL stored procedure which we wrote. The stored procedure sends a large number of emails to users in our corporation using the "utl_smtp" package. The stored procedure returns a count of the emails back to the Java portlet when it's finished. This number is displayed in the portlet.
Our problem:
The stored procedure functions as expected when run from a PL/SQL block in SQL*Plus, and the Java portlet calls the procedure properly when sending out a smaller number of emails (Less than 200 usually). When we get into a higher number of emails the procedure hangs when called from the portlet, but it STILL functions properly from SQL*Plus. It does not return the number of emails sent
and the Java portlet is unable to return a SQLException. Also, we have noticed that emails are sent at a much slower pace from the stored procedure when it's called from the portlet.

Any Ideas?

JTextField update problem when called from PropertyChangeEvent

Hi,
I'm trying to create forms that can be dynamically loaded with Class.forname(formName).
Those forms should always inherit some methods that make it easy to pass data to
them and receive data from them. The idea is that the data comes from a table which
sends a hashmap (String column/JTextField-name + String Value pairs) with firePropertyChanged
as soon as a new row is seleceted. The JTextFields in the form are marked with setName("FieldName") that has to correspond to the name of the columns of the table.
My problem is that I can't update the fields in my form when I'm calling getRow(HashMap)
from within propertyChangeEvent but that's necessary to keep the forms flexible.
JTextFieldName.setText(newText) just won't work. But it works when I call getRow(HashMap)
from the constructor. SwingWorker and threads to update the form didn't help.
I don't need to call pack() / update() / repaint() on the JFrame, do I ??
update() / validate() / repaint() etc. didn't work on the JTextField themselves.
Below is the code for one of the test-forms (just a JPanel that is inserted in a frame)
with all of it's methods. Does anybody have a solution to this problem ??
Thanks for taking time for that !!
Benjamin
* testTable.java
* Created on 15. April 2004, 16:12
package viewcontrol.GUI;
* @author gerbarmb
import javax.swing.*;
import java.awt.*;
import java.beans.*;
import java.util.*;
public class testTable extends javax.swing.JPanel
          implements
               java.awt.event.KeyListener,
               java.beans.PropertyChangeListener {
      * public static void main(String[] argv) { testTable tt = new testTable();
      * JFrame jf = new JFrame(); jf.setContentPane(tt); jf.setVisible(true); }
     /** Creates new customizer testTable */
     public testTable() {
          initComponents();
          HashMap hm = new HashMap();
           * Only for debugging, to see that the method getRow() works when
           * called from the constructor.
           hm.put("ttext", "TEst");
           this.getRow(hm);
      * This method is called from within the constructor to initialize the form.
      * WARNING: Do NOT modify this code. The content of this method is always
      * regenerated by the FormEditor.
     private void initComponents() {//GEN-BEGIN:initComponents
          java.awt.GridBagConstraints gridBagConstraints;
          jLabel1 = new javax.swing.JLabel();
          textIn = new javax.swing.JTextField();
          jLabel2 = new javax.swing.JLabel();
          intIn = new javax.swing.JTextField();
          jLabel3 = new javax.swing.JLabel();
          numIn = new javax.swing.JTextField();
          jLabel4 = new javax.swing.JLabel();
          dateIn = new javax.swing.JTextField();
          jLabel5 = new javax.swing.JLabel();
          dateTimeIn = new javax.swing.JTextField();
          jLabel6 = new javax.swing.JLabel();
          jCheckBox1 = new javax.swing.JCheckBox();
          keepValues = new javax.swing.JCheckBox();
          jButton1 = new javax.swing.JButton();
          setLayout(new java.awt.GridBagLayout());
          jLabel1.setText("Text");
          add(jLabel1, new java.awt.GridBagConstraints());
          textIn.setName("ttext");
          textIn.setPreferredSize(new java.awt.Dimension(100, 21));
          textIn.addActionListener(new java.awt.event.ActionListener() {
               public void actionPerformed(java.awt.event.ActionEvent evt) {
                    textInActionPerformed(evt);
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridwidth = 2;
          add(textIn, gridBagConstraints);
          jLabel2.setText("Integer");
          add(jLabel2, new java.awt.GridBagConstraints());
          intIn.setName("tint");
          intIn.setPreferredSize(new java.awt.Dimension(50, 21));
          add(intIn, new java.awt.GridBagConstraints());
          jLabel3.setText("Number");
          add(jLabel3, new java.awt.GridBagConstraints());
          numIn.setName("tnum");
          numIn.setPreferredSize(new java.awt.Dimension(50, 21));
          add(numIn, new java.awt.GridBagConstraints());
          jLabel4.setText("Date");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 0;
          gridBagConstraints.gridy = 1;
          add(jLabel4, gridBagConstraints);
          dateIn.setName("tdate");
          dateIn.setPreferredSize(new java.awt.Dimension(50, 21));
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 1;
          gridBagConstraints.gridy = 1;
          add(dateIn, gridBagConstraints);
          jLabel5.setText("DateTime");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 2;
          gridBagConstraints.gridy = 1;
          add(jLabel5, gridBagConstraints);
          dateTimeIn.setName("tidate");
          dateTimeIn.setPreferredSize(new java.awt.Dimension(80, 21));
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridy = 1;
          add(dateTimeIn, gridBagConstraints);
          jLabel6.setText("Bit");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridy = 1;
          add(jLabel6, gridBagConstraints);
          jCheckBox1.setName("tbit");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridy = 1;
          add(jCheckBox1, gridBagConstraints);
          keepValues.setText("keep values");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 7;
          gridBagConstraints.gridy = 3;
          add(keepValues, gridBagConstraints);
          jButton1.setText("Send");
          jButton1.addActionListener(new java.awt.event.ActionListener() {
               public void actionPerformed(java.awt.event.ActionEvent evt) {
                    jButton1ActionPerformed(evt);
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 7;
          gridBagConstraints.gridy = 2;
          add(jButton1, gridBagConstraints);
     }//GEN-END:initComponents
     private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_jButton1ActionPerformed
          sendRow();
     }//GEN-LAST:event_jButton1ActionPerformed
     private boolean sendRow() {
          java.util.HashMap hm = new java.util.HashMap();
          Component[] cs = this.getComponents();
          for (int i = 0; i < cs.length; i++) {
               if (((Component) cs).getName() != null) {
                    if (cs[i] instanceof JCheckBox) {
                         String value = ((JCheckBox) cs[i]).isSelected() ? "1" : "0";
                         hm.put(cs[i].getName(), value);
                    } else if (cs[i] instanceof JCheckBox) {
                         hm.put(cs[i].getName(), ((JTextField) cs[i]).getText());
          } // end for
          firePropertyChange("rowChanged", null, hm);
          return true;
     private void getRow(java.util.HashMap hm) {
          //if (! this.keepValues.isSelected()) {
          Component[] cs = this.getComponents();
          for (int i = 0; i < cs.length; i++) {
               if (cs[i].getName() != null && hm.containsKey(cs[i].getName())) {
                    Component component = cs[i];
                    String componentName = cs[i].getName();
                    String componentValue = (String) hm.get(component.getName());
                    if (cs[i] instanceof JTextField) {
                         // output for debugging
                         System.out.println("Setting " + cs[i].getName() + " = "
                                   + componentValue);
                         ((JTextField) component).setText(componentValue);
                    } else if (cs[i] instanceof JCheckBox) {
                         // output for debugging
                         System.out.println("JCheckBox found");
                         JCheckBox cb = (JCheckBox) component;
                         boolean selected = (componentValue == null ? false : (componentValue.equals("1")
                                   ? true
                                   : false));
                         ((JCheckBox) component).setSelected(selected);
          } // end for
          /* Uncomment this code snippet to retrieve the text that has been set
          for the components (that means JTextFields)
          This is just for debugging !
          Component[] cs = this.getComponents(); for (int i = 0; i < cs.length;
          i++) { if (cs[i].getName() != null) { if (cs[i] instanceof
          JTextField) { System.out.println("Value of " +cs[i].getName() + " = " +
          ((JTextField) cs[i]).getText()); } } } // end for
     private void textInActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_textInActionPerformed
     }//GEN-LAST:event_textInActionPerformed
     public void keyPressed(java.awt.event.KeyEvent e) {
          if (e.getKeyCode() == java.awt.event.KeyEvent.VK_ENTER) {
               sendRow();
     public void keyReleased(java.awt.event.KeyEvent e) {
     public void keyTyped(java.awt.event.KeyEvent e) {
     public void propertyChange(java.beans.PropertyChangeEvent evt) {
          if (evt.getPropertyName().equals("newRow")) {
               final PropertyChangeEvent finalEvt = evt;
               Runnable makeChanges = new Runnable () {
                    public void run() {
                         getRow((java.util.HashMap) finalEvt.getNewValue());
     // Variables declaration - do not modify//GEN-BEGIN:variables
     private javax.swing.JTextField dateIn;
     private javax.swing.JTextField dateTimeIn;
     private javax.swing.JTextField intIn;
     private javax.swing.JButton jButton1;
     private javax.swing.JCheckBox jCheckBox1;
     private javax.swing.JLabel jLabel1;
     private javax.swing.JLabel jLabel2;
     private javax.swing.JLabel jLabel3;
     private javax.swing.JLabel jLabel4;
     private javax.swing.JLabel jLabel5;
     private javax.swing.JLabel jLabel6;
     private javax.swing.JCheckBox keepValues;
     private javax.swing.JTextField numIn;
     private javax.swing.JTextField textIn;
     // End of variables declaration//GEN-END:variables

The problem of the change in the form not being comitted is that
I forgot SwingUtilities.invokeLater(makeChanges); in the bottom
part in public void propertyChange(java.beans.PropertyChangeEvent evt)
after having created a new Runnable.
Changes to the UI often have to be comitted by SwingUtitlities.invokeLater()
though I don't know that much about Swing yet.
Thanks to everybody who tried to solve that problem.
Benjamin

Crystal Reports 2008 fails when called from e Web Service under 64bit OS

I have discovered that Crystal Reports 2008 doesn't work when called from a Web Service running under 64bit Windows platforms (in my case Windows 2003 Server and Windows XP 64bit); practically no object is instantiated. I've tried several solutions without success.
Before creating a wrapper component to use under COM+, is there anybody who has a better and cheaper solution than creating another component to wrap CR 2008 ?

Hi Sergio,
Before I mark this post as assumed answered I would just like to say and re-iterate that at this time there is no one answer and we fully understand your concerns. As you know in CR 6.0 it came in 16 and 32 bit versions because at the time 32 bit was relatively new but 16 bit was the norm. This is also true for 32 to 64 bit, 32 is the norm and 64 bit is relatively new. We know and are well aware 64 bit is the future and we are working as quickly as we can to move in that direction. Because of the complexity of the Product it's not simply a matter of re-compiling all of our dll's in 64 bit format. The core of our data connectivity with our database drivers which are dependant on third party clients must also need to support 64 bit modes. This as well as Printer drivers also need to be 64 compatable, there are a multitude of dependencies that we rely on that must add 64 bit support. As a programmer you are well aware of the issues around Thunking back and forth between 32 to 64 bits, it can cause delays and potentially loss of data which is a whole other issue. Not to mention also that we would have to ship both versions potentially doubling the size of the distribution packages or doubling the size of the dll's to have the ability to work in both modes. Relatively speaking of course, it would not be double the size but the variables would need to be able to allocate 32 or 64 memory blocks.
The other option is to produce 2 separate versions, this alone is a massive project. Any issue would need to be fixed in separate code streams.
So I'm sure you can see it's not simply a matter of saying yes we support 64 bit. It's a massive project that is going to take time to do and we have to wait for the third party drivers to commit also.
Visual Studio .NET 2005 and 2008 is the only option if you want true 64 bit but you will be limited on what DB's you can support and export formats you can export to. They are the only drivers we did convert to 64 bit.
Thank you for your understanding
Don

Need to block spam calls from 201-*

I'm getting many spam calls from numbers like 201-340-1009, but the right-ward numbers keep changing.
I'm told this is someone mis-using (or just using) PINGER. I'd like to just block all
calls from 201 area code (New Jersey, not waiting for Snookie call). Can I do this?
If not, any other recommendations?
Much Thanks,
Dave

You can also list your cell number(s) on the U.S. government's Do Not Call registry by going to https://www.donotcall.gov/default.aspx. I believe this helps, as I haven't been getting spam calls or texts (though I never got very many) after giving my registration there 31 days to become effective. If they do persist in calling, this gives you a mechanism to report them. This way you only have to register your number, not all the numbers that might be trying to call you.
And (of course) when we go to that site we learn that "Scammers have been making phone calls claiming to represent the National Do Not Call Registry. The calls claim to provide an opportunity to sign up for the Registry." D'oh!

Infinite blocking when calling service other than "toupper"

Hi,
We are testing (trying) Tuxedo Connector between (from) WLS 6.1 (NT) and (to)
Tuxedo 6.5 (AIX). Calling the sample service "toupper" works fine. But WLS is
blocking when calling services that do not return the result in the same buffer
as input (as toupper does). When calling a Tuxedo service that returns its result
in a buffer it newly allocates (C library), from the WLS logging we see that it
was able to get the returned data size, but then it seems to block for the data
itself. Following are the two last logged WLS messages:
Jan 4, 2002 5:30:32 PM EST> <Debug> <WTC> <]/read_dom_65_tfmh/130/-1>
Jan 4, 2002 5:30:32 PM EST> <Debug> <WTC> <]/TuxedoMuxableSocket/dispatch/90/failure=-1>
Any idea? Thanks, Eric.

See attachment (log from WLS) and following code snippet.
tupper(TPSVCINFO *rqst)
/* next line will work */
char* outMsg = rqst->data;
/* next line won't work, would get:
weblogic.wtc.jatmi.TPException: null
TPException.getDiagnostic(): 0
TPException.gettperrno(): 13
char* outMsg = (char*)tpalloc("X_OCTET", NULL, rqst->len);
for(int i = 0; i < rqst->len; i++)
out[i] = toupper(rqst->data);
/* Return the transformed buffer to the requestor. */
tpreturn(TPSUCCESS, 0, out, rqst->len, 0);
"Eric Poulin" <[email protected]> wrote:
>
Hi,
We are testing (trying) Tuxedo Connector between (from) WLS 6.1 (NT)
and (to)
Tuxedo 6.5 (AIX). Calling the sample service "toupper" works fine. But
WLS is
blocking when calling services that do not return the result in the
same buffer
as input (as toupper does). When calling a Tuxedo service that returns
its result
in a buffer it newly allocates (C library), from the WLS logging we see
that it
was able to get the returned data size, but then it seems to block for
the data
itself. Following are the two last logged WLS messages:
Jan 4, 2002 5:30:32 PM EST> <Debug> <WTC> <]/read_dom_65_tfmh/130/-1>
Jan 4, 2002 5:30:32 PM EST> <Debug> <WTC> <]/TuxedoMuxableSocket/dispatch/90/failure=-1>
Any idea? Thanks, Eric.
[weblogic.log]

HR_INFOTYPE_OPERATION not working when called from Dynamic action

Hi ,
       Senario : I would like to execute a form from dynamic action which
creates a record in 0015 (Additional payment IT) .
       I have writen the code as shown below am using FM HR_INFOTYPE_OPERATION
. When i execute the program from se38 it is creating a record, however it is
not created when it is called from dynamic action..when i debugged the code in
inside the FM HR_INFOTYPE_OPERATION there is a FM HR_MAINTAIN_MASTERDATA where
they are using call dialog (statement) and
sy-oncom = 'N'   when called from Dynamic action and
sy-oncom = 'S'   when called executed directly.
I tried to change the sy-oncom to S while run from Dynamic action it created
the record.
So Can anyone explain me abt sy-oncom and how can i resolve the issue..
code..
REPORT ZHRPYENH01 .
perFORM TERMIATION_9000.
INCLUDE DBPNPMAC.
      FORM Termiation_9000                                          *
FORM TERMIATION_9000.
INFOTYPES : 0015.
*data : i .
*i ='c'.
*break-point.
*message i000(000) with i.
TABLES : PRELP.
DATA : P9000 TYPE PA9000." with header line.
DATA : P0000 TYPE STANDARD TABLE OF P0000 WITH HEADER LINE.
DATA : P0015 TYPE STANDARD TABLE OF P0015 WITH HEADER LINE.
DATA : HIRE_DATE LIKE SY-DATUM,
         TERM_DATE LIKE SY-DATUM.
DATA : MOLGA LIKE T500L-MOLGA VALUE '25',
         SEQNR LIKE PC261-SEQNR.
DATA : RGDIR TYPE STANDARD TABLE OF PC261 WITH HEADER LINE.
DATA : ACTUAL_PERIOD LIKE PA9000-RETENTION.
DATA : PNP-SW-FOUND TYPE SY-SUBRC ,
         PNP-SY-TABIX TYPE SY-TABIX.
DATA : TER_PERNR LIKE PA0001-PERNR.
DATA : REF_PERNR LIKE PA0001-PERNR.
data : key type BAPIPAKEY.
data : payed_amount type p0015-BETRG.
data : future_payment_amount type p0015-BETRG.
data : p0002 like pa0002.
types : begin of t_deduction ,
          deducation_date like p0015-begda,
          future_payment_amount type p0015-BETRG.
types : end of t_deduction.
data : future_deduction type standard table of t_deduction with
*header line.
data : future_deduction type t_deduction .
data : RETURN type BAPIRETURN1.
*data : deduction_p0015 like standard table of p0015 with header line.
data : deduction_p0015 like p0015 .
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
****Prepare 0015 data for deduction
*deduction for payed amount
clear deduction_p0015.
*refresh deduction_p0015.
deduction_p0015-pernr = REF_PERNR.
*deduction_p0015-pernr = TER_PERNR.
deduction_p0015-lgart = 'M120'.
deduction_p0015-begda = sy-datum + 1 .
deduction_p0015-endda = sy-datum + 1 .
deduction_p0015-BETRG = payed_amount.
deduction_p0015-WAERS = 'SGD'.
deduction_p0015-ZUORD = TER_PERNR.
*append deduction_p0015.
**deduction for future payment amount
*loop at future_deduction.
*clear deduction_p0015.
*deduction_p0015-pernr = REF_PERNR.
**deduction_p0015-pernr = TER_PERNR.
*deduction_p0015-lgart = 'M120'.
*deduction_p0015-begda = FUTURE_DEDUCTION-DEDUCATION_DATE.
*deduction_p0015-endda = FUTURE_DEDUCTION-DEDUCATION_DATE.
*deduction_p0015-BETRG = future_deduction-future_payment_amount.
*deduction_p0015-WAERS = 'SGD'.
*deduction_p0015-ZUORD = TER_PERNR.
*append deduction_p0015.
*endloop.
Create a deduction wage type in 0015 for the employee
break-point.
CLEAR RETURN.
CALL FUNCTION 'BAPI_EMPLOYEET_ENQUEUE'
EXPORTING
    NUMBER              = REF_PERNR
    VALIDITYBEGIN       = '18000101'
IMPORTING
   RETURN              = return
if not return is initial.
message E000(000) with
'Referred Employee could not be locked for referal payment deducation,
please try after some time'.
endif.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
    INFTY                  = '0015'
    NUMBER                 = REF_PERNR
   SUBTYPE                = 'M120'
OBJECTID               =
LOCKINDICATOR          =
   VALIDITYEND            = SY-DATUM
   VALIDITYBEGIN          = SY-DATUM
RECORDNUMBER           =
    RECORD                 = deduction_p0015
    OPERATION              = 'COPY'
TCLAS                  = 'A'
   DIALOG_MODE            = '2'
NOCOMMIT               =
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
IMPORTING
   RETURN                 = return
   KEY                    = key
break-point.
COMMIT WORK.
if not return is initial.
*return-TYPE
*ID
*NUMBER
*MESSAGE
message I000(000) with return-MESSAGE.
endif.
CALL FUNCTION 'BAPI_EMPLOYEET_DEQUEUE'
EXPORTING
    NUMBER              = REF_PERNR
    VALIDITYBEGIN       = '18000101'
IMPORTING
   RETURN              = return
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
Thanks and regards
-Senthil Bala
Message was edited by: senthil bala

Hi Senthil
Why at all U want a subroutine to create a record in IT0015 through Dynamic action.There are some standard codes available to update infotypes.
Let me give U an example
14     9CON     BETRG     4     2     I     INS,0015 This will create a record in IT0015 when IT0014 is updated with Wagetype 9CON
14     9CON     BETRG     4     3     W     P0015-LGART='5400' Set wagetype for IT0015(Here U can use a subroutine call to set the wagetype)
14     9CON     BETRG     4     4     W     P0015-BETRG=P0014-BETRG set amount for IT0015(Here U can use a subroutine call to get the amount)
14     9CON     BETRG     4     5     W     P0015-BEGDA=P0014-ENDDA set the dates(Here U can use a subroutine call to set the dates)
Hope this will help U.
Please award points if helpful

Advanced table:not able to view more than 10 rows when called from workflow

Hi everyone,
I'm calling a page that contains advanced table and its controller class from two places.
First one is from a inquiry form, when this page is called it works fine. when there are more than 10 rows, first 10 are shown on page render and when we click on Next link, other rows are shown. This is becuase I have given the records displayed property on adavanced table = 10. I'm fine till here.
Second one is I'm calling this page again from a workflow notificaiton. There is a link called view more details on the workflow notification , click of this link will open the page with 10 records displayed. But when user tries to click on Next it doesn't work. It just doesn't refresh.
Its very wierd,. not able to understand what could be wrong when calling from wf notificiton. Its the same page and conroller code used in both the places.
Please help me!!
Thanks
Sunny

Thanks for your response Kristofer. You are correct, there was a difference in the parameters and the issue is resolved now.

Set the default field value to transaction code field, when calling from WD

Hi all,
Can we pass the value in a input field of a standard transaction calling from WD application. Suppose we are calling a transaction VA03 in an external window, then how will be pass the value in the VBAK_VBELN screen field.
Is there any way to pass the value to this transaction field. I have also tried out to set the parameter ID 'AUN' for VA03 transaction VBELN field. But it did not work for me.
Is there any way to set the default field value to transaction code field, when calling from WD?
Please suggest, if anyone have any idea.
Thanks
Sanket

Hi,
I am using the below code to open a standard transaction. It will help you to explain my point more easily.
DATA: url TYPE string,
          host TYPE string,
          port TYPE string.
*Call below method to get host and port
cl_http_server=>if_http_server~get_location(
     IMPORTING host = host
            port = port ).
*create URL
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction=' 'VA03'
   INTO url.
*get the window manager as we are opening t code in external window.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
call the url which we created above
lo_window_manager->create_external_window(
EXPORTING
url = url
RECEIVING
window = lo_window ).
lo_window->open( ).
Note*
One more query I want to add to this thread, that is there any possibility to call a custom transaction as well?

Subtemplate footer is not coming when calling from the main template

Hi All,
The footer from the subtemplate is not coming in the output when calling from the main template. Does anybody worked on the subtemplate?
If the same footer is put in the main template, it is displaying.
Please respond as this is a critical issue for us.
Thanks,
Ambadas

Hi Tim,
Thanks for your reply. Here is syntax which I got from the Oracle BI Publisher blog. And this is to just test locally.
http://blogs.oracle.com/xmlpublisher/2006/04/11?import:file:///C:/temp/HeaderFooter.rtf
<?import:file:///d:/test/GEPOPRINT_GER_GER.rtf?>
<?import:file:///d:/test/GEPOPRINT_US.rtf?>
<?for-each@section:G_HEADERS?>
<?if:POH_REPORT_NAME='GER PO w/GERMAN Data'?>
<?call-template:PO_GERMAN?>
<?end if?>
<?if:POH_REPORT_NAME='US Purchase Order'?>
<?call-template:PO_US?>
<?end if?>
<?End for-each?>
And I don't have any footers in the main template but in the subtemplate I have the respective footers. If you want, I can send all the RTF's to you directly.
Let me know.
Thanks,
Ambadas

Query response time takes more time when calling from package

SELECT
/* UTILITIES_PKG.GET_COUNTRY_CODE(E.EMP_ID,E.EMP_NO) COUNTRY_ID */
(SELECT DISTINCT IE.COUNTRY_ID
FROM DOCUMENT IE
WHERE IE.EMP_ID =E.EMP_ID
AND IE.EMP_NO = E.EMP_NO
AND IE.STATUS = 'OPEN' ) COUNTRY_ID
FROM EMPLOYEE E
CREATE OR REPLACE PACKAGE BODY UTILITIES_PKG AS
FUNCTION GET_COUNTRY_CODE(P_EMP_ID IN VARCHAR2, P_EMP_NO IN VARCHAR2)
RETURN VARCHAR2 IS
L_COUNTRY_ID VARCHAR2(25) := '';
BEGIN
SELECT DISTINCT IE.COUNTRY_ID
INTO L_COUNTRY_ID
FROM DOCUMENT IE
WHERE IE.EMP_ID = P_EMP_ID
AND IE.EMP_NO = P_EMP_NO
AND IE.STATUS = 'OPEN';
RETURN L_COUNTRY_ID;
EXCEPTION
WHEN OTHERS THEN
RETURN 'CONT';
END;
END UTILITIES_PKG;
when I run above query its coming in 1.2 seconds.but when comment subquery and call from package its taking 9 seconds.query returns more than 2000 records.i am not able to find the reason why it is taking more time when calling from package?

You are getting a different plan when you run it as PL/SQL most likely. Comment your statement:
SELECT /* your comment here */then find them in V$SQL and get the SQL IDs. You can then use DBMS_XPLAN.DISPLAY_CURSOR to see what is actually happening.
http://www.psoug.org/reference/dbms_xplan.html

Is it possible to call diff report queries when called from form

hello all
I want to know if it is possible to call different report queries when called from oracle 9i form .
i tried to use he
SET_REPORT_OBJECT_PROPERTY(REPORT_QUERY = 'q_diff' )
option and actualy called the report name
but it dint seem to work !!!
also is it possible to chng the title of the browser at runtime

Sandeep,
this property is used with passing Record Groups as data parameters from Forms.
Passing the query name indicates that the values contained in the record group substitutes the result of the named query. This may work in client/server Reports, but it definitively doesn't work on teh Web because you can't pass a Record Group as a data parameter in this environment.
Te problem with changing a Reports query is that you must meet the same number of columns and column types as they exist in the Report. I didn't spend much time with XML based runtime customization in Reports. I think that you can change the Reports query through this feature. In Forms you would create the XML file using text_io and the merge it with an existing Reports. I never did this before. So it could be that all I am saying does not work in the end. Before following this idea, you may better ask in teh Reports forum on OTN if it is possible to use the runtime customization feature to modify the Reports query.
Fran

Running BDC in 'A' mode when called from Enterprise portal

HI All,
I have created a RFC which contains a BDC program that update data in SAP R/3. The RFC is called from Enterprise portal. Is it possible to run the rfc in A(all screen display) mode while calling from EP. I have tried it but it gives following 2 errors on EP
cm_no_data_received
rfc_error_communication
what changes i have to do so that i can run the BDC in 'A ' mode when called from Enterprise portal

it would not be related to EP administration issues but something to do with GUI usage. it is loggically fare enough not to give options of viewing the debug screen in as it might concern security issues inway the data could be edited at any point of time. Moreover the screens u see in R3 are ABAP but whereas in EP it is purely based on Java and the calls to SAP is done via JCO thus enabling ABAP functionalities in EP. Maybe for these technical reasons or constraints it wont be possibel to view the screen in EP eventhough u had ext.bp activated

I have an iphone 3gs, and i keep getting blocked number calling me (prank calls) im getting really fed up with it all now i have had 12 calls from the same person! i was just wondering if there is any way i could block this caller from calling me?

i have an iphone 3gs, and i keep getting blocked number calling me (prank calls) im getting really fed up with it all now i have had 12 calls from the same person! i was just wondering if there is any way i could block this caller from calling me?

Contact your carrier and ask them.

Bring Excel 2007 to the front when called from LabView v9 in Windows 7

I am building a duplicate system using Windows 7, LabView v9 and Excel v2007. The original system used WinXP, Excel 2007 and LabView v8.6. The issue is that the original system was able to bring Excel to the front when called from Labview using the property node -application-> visible. This new configuration runs Excel, loads the data, runs the macros but does not bring Excel to the front. The icon blinks in the Win7 taskbar and when selected displays over LabView. If I minimize the Labview window, Excel is there. This leads me to conclude that Excel is visible, as requested but will not come to the front until selected from the taskbar. The only differences, besides the versions, is the original system template files used the .xls extension in and was run in Excel in compatible mode. At the customers request, the new system uses the .xlsm extension on the Excel template files. I have tried using application.visible = True in the macro as well. Could be a setting in Labview? Could be a setting in Excel? Could be .xls vs. .xlsm? Or an issue with Windows 7 and the newer version of Labview.
HP workstation - Labview v9 - Windows 7 - Excel 2007 sp2
Thank you in advance
Stephen
Solved!
Go to Solution.

I will try the windowstate change. Were these done in succession? (i.e. property node -> property node -> property node) Or were they done along the way such as call the ActiveX open and a property node then in a worksheet modification area etc. so there was some time between calls?
I am not sure about the API since the discussion there is with regard to DDE. (Taken from the link document: If you want to call a DLL that contains ActiveX
objects, use the Automation
Open VI with the Property
Node and the Invoke
Node.). I am calling Excel as an application not as a library call unless I am mistaken, which I could certainly be. Are you thinking that once Excel is active through the Automation Open VI that a DLL call to set the application visible would work? I may be trying this already but in Excel through the use of the macro I call from LabView. It contains application.visible = True at the beginning before reading files and plotting data.
I may try sprinkling Property node with application->visible in various locations in the LabView diagram as I do update cells after the call to the plot macro. The puzzle for me is the blinking Excel icon in the task bar. This means active and running but not visible or something wrong as well. There are a few #VALUE cells if not all test in the system are run. Again not a problem in Excel 2007-WinXP-LV8.6
Thank you again one and all.

GetURL:javascript blocked when called from a frame action in flash?

Similar Messages

Maybe you are looking for