GI/ASM upgrade from 11.2.0.1 to 11.2.0.3

Hi All,
I need to upgrade GI running ASM (11.2.0.1) to 11.2.0.3. This is a standalone installation.
1. Can we do a out-of-place upgrade for GI without bringing down the old GI and when I get downtime then upgrade the ASM instance?
If yes wouldn't my root.sh change the /etc/ files used by the old GI and make it unsuable (unlike in RDBMS out-of-place upgrade).
2.what is the rollback strategy for a GI upgrade. If we face an issue?
3.Can I please know the steps to go ahead with this installation!!
I have gone through the oracle documentation but its quite confusing.
Thanks in Advance..

I do not have RAC its a standalone database using ASM
u01/app/oracle/oraInventory/ContentsXML : mydb> cat inventory.xml
<?xml version="1.0" standalone="yes" ?>


<INVENTORY>
<VERSION_INFO>
<SAVED_WITH>11.2.0.1.0</SAVED_WITH>
<MINIMUM_VER>2.1.0.6.0</MINIMUM_VER>
</VERSION_INFO>
<HOME_LIST>
<HOME NAME="OraDb11g_home1" LOC="u01/app/oracle/product/11.2.0/db" TYPE="O" IDX="1"/>
<HOME NAME="Ora11g_gridinfrahome1" LOC="u01/app/oracle/product/ASM" TYPE="O" IDX="2"/>
<HOME NAME="OraClient11g_home1" LOC="u01/app/oracle/product/11.2.0_32bit" TYPE="O" IDX="3"/>
</HOME_LIST>
</INVENTORY>
Edited by: 861173 on Mar 14, 2012 2:03 PM

Similar Messages

Database upgrade - Oracle 10g r2 ,RAC(2 Nodes with ASM) upgrade from HP-UX to RHEL 5.9

Hi All
I am planning to upgrade our RAC database 2 nodes with ASM from HP-UX to RHEL 5.9.
Following is our setup
Current setup:
Oracle Database 10g r2 (10.2.0.5.0) RAC database.
Nodes: 2
Storage: ASM
OS: HP-UX ia64
Database Size: 1.2 TB
New Setup:
Oracle Database 10g r2(10.2.0.5.0) RAC database
Nodes: 2
Storage: ASM
OS: RHEL 5.9 x86 64
Since we are moving from a big endian format to a small endian format(HP-UX to RHEL 5.9) the same ASM cannot be used.
Kindly help me with process and other important documents to be followed.
Thanks.

Hi...
If it was a standlone database concepts like transportable tablespaces, rman would have been convenient.
Since we are using a RAC database with ASM as storage how do we use these techniques specified in NOTE:733205.1
Due to endianness issue we cannot use the same ASM instance.
Along with the new RAC node install a new ASM instance would have to be created.
Kindly help me with migration for RAC with existing ASM to new Hardware
Thanks and Regards

Upgrade ASM alone from 11.2.0.3 to 11.2.0.4 without RAC

Hi Viewers,
Can anyone provide me a steps to upgrade ASM instance from 11.2.0.3 to 11.2.0.4 and RAC is not configured.
Please share the steps or document to upgrade ASM instance in Linux.
Thanks,
Anil

When you download the patchset, it include documentation about how to perform the upgrade.
In Metalink there are several notes, I thin this is interesting, Doc ID 1434351.1
HTH - Antonio NAVARRO

Need Some Immdiate Help in Upgradation from 10.2.0.3 to 11.2.0.3 RAC 2 Nod

Hi Experts,
I want to upgrade from 10.2.0.3 to 11.2.0.3.
I have a Linux platform in place. It is a 2 NODE RAC WITH ASM
1. All my IP Addresses( Public/Private/VIP) are placed in /etc/host file.
Q1: When we upgrade to 11g It will ask for SCAN IP, what should I do for that, I don't have DNS working in my organization, where Can I get SCAN IP and its port#?
2. There are few components Invalid, Which I feel may be hindrance for my up gradation, Could you please tell me if I can upgrade the database even if Let these components Invalid?
COMP_ID COMP_NAME VERSION STATUS
AMD OLAP Catalog 10.2.0.3.0 INVALID
APS OLAP Analytic Workspace 10.2.0.3.0 INVALID
XOQ Oracle OLAP API 10.2.0.3.0 INVALID
When I checked the Invalid objects I found lot of invalid objects, tried to compile them, few got compiled rest with compilation errors, However One I found very much related to this was package body.
PACKAGE BODY OLAPSYS.DBMS_AW_UTILITIE INVALID
Tried to compile it..threw errors.
I did some R&D after checking some Oracle notes..I could find ORA-36961: Oracle OLAP is not available...poping up.
SQL> BEGIN cwm2_olap_level_attribute.Create_Level_Attribute('olapsys' ,'cwm2iner_d1' ,'cwm2iner_da1' ,'cwm2iner_l1' ,'cwm2iner_la1' ,'display_name' ,'short_description' ,'description'); END;
ERROR at line 1:
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "OLAPSYS.CWM2_OLAP_MANAGER", line 153
ORA-06512: at "OLAPSYS.CWM2_OLAP_MANAGER", line 181
ORA-06512: at "OLAPSYS.CWM2_OLAP_MANAGER", line 228
ORA-06512: at "OLAPSYS.CWM2_OLAP_MANAGER", line 561
ORA-06512: at "OLAPSYS.CWM2_OLAP_UTILITY", line 1540
ORA-01403: no data found
ORA-06512: at "OLAPSYS.CWM2_OLAP_LEVEL_ATTRIBUTE", line 45
ORA-06512: at "OLAPSYS.CWM2_OLAP_LEVEL_ATTRIBUTE", line 188
ORA-06512: at "OLAPSYS.CWM2_OLAP_LEVEL_ATTRIBUTE", line 294
ORA-06512: at line 1
=========
Thanks

Hi,
You need to use a different IP address for the SCAN VIP. In your example, it cannot be the same as dlpqcora1.
Also, if you are not using a DNS to resolve it, then be aware that only one IP address can be configured (from note +[ID 887522.1] 11gR2 Grid Infrastructure Single Client Access Name (SCAN) Explained+ ):
>
Instead of DNS or GNS, Can we use '/etc/hosts' to resolve SCAN?
Oracle strongly recommends that you do not configure SCAN VIP addresses in the hosts file. But if you use the hosts file to resolve SCAN name, you can have only one SCAN IP address.
If hosts file is used to resolve SCAN hostname, you will receive Cluster Verification Utility failure at end of installation (See NOTE 887471.1 for more details)
>
Regards.

ASM UPGRADE

Hi,
I have some doubt in ASM Upgrade and thats what I would like to discuss this issue here.If I am going to upgrade database,clusterware and asm then the approach should be like below:-->
Database version from 10.1.0.5 to 10.2.0.4
OS AIX 5.3 TL8
(1)install new crs_home clusterware 10.2.0.4
(2)upgrade database to 10.2.0.4 from 10.1.0.5 by installing new Oracle_home
(3) Upgrade ASM from 10.1.0.5 to 10.2.0.4 by installing separate oracle_home.
Here I have doubt in upgrading asm from old to new version.Does it going to affect datafile during asm instance upgrade.If not then what is the method to upgarde asm in such a environment.
Please help me out on this topic.
Thanks in advance!
Mk

Hello Mk,
Take a look on Metalink note 730365.1 (Oracle Database Upgrade Path Reference List) and read the patchset documentation.
You must upgrade ASM before upgrade the database. Then I think the correct order would be (1,3,2) on your case.
Also there are a howto on http://mufalani.blogspot.com/2009/06/applying-10204-patch-on-rac-systems.html
Cheers,
Rodrigo Mufalani
http://mufalani.blogspot.com

Upgrading from 10.2 to 11.1/11.2 plus OS upgrade

Hi Experts!
I need a little advice from you guys. I am planning to upgrade from Oracle RAC 10.2 to Oracle RAC 11.1/11.2.
I am not able to decide which one will be good idea that is upgrading to 11.1 or 11.2.
And on the top of it we are going to have OS upgrade from SuSe 9 to Suse 10 64 bits.
I did not find a good document on how to move from Oracle RAC 10.2 to Oracle RAC 11.1/11.2.
How can I achieve the high availability during the OS upgrade?
Do I need to take any action after the OS upgrade to relink the Oracle binaries?
Below are my environment details:
OS: Suse 9 64bit
DB: 10.2.0.4
ASM: NO
planning to upgrade on same server:
OS upgrade to: Suse 10
DB: 11.1.0.7 or 11.2.0.2
ASM: NO
Let me know if I need to post more details.
Thanks in advance.
MAW

Thanks for your reply Xaheer!
I would like to have my DB up and running on some other machine while the OS Upgrade is being performed.
I am planning for Logical standby (read only), switchover (read write) and redirect user connections to this DB.
Once the OS Upgrade is completed, I will perform a switch over and bring my DBs down for Upgrade.
My goal is to have minimum down time for the PROD.
Do you know any MOS note on how upgrade from 2 node RAC 10.2.0.4 to 2 node RAC 11.1.0.7 or 11.2.0.2.
I am not clear with 11gR2 Upgrade Companion.
Thanks again for taking out time in answering my questions.

Rolling upgrade from 11.1.0.6 to 11.1.0.7

Hello -
I am testing the "rolling upgrade" from 11.1.0.6. to 11.1.0.7. I have a two node cluster on Linux. Is there a way to upgrade either the ASM software or the dbms software without causing downtime to the entire cluster? I can upgrade the clusterware in a true rolling fashion. However, when I attempt to upgrade the ASM location, it ends up taking down the other node. Same for the rdbms software - The other instance ends up going down when I start the patching on one instance - from the remove operations being performed. Has anyone successfully patched an entire stack (without downtime)?
Thanks in advance for any insights!

Yes, I am following those instructions. The ASM instructions caused the other node to be inaccessible. But, when I did the rdbms upgrade, then node B was also inaccessible during that time. I will go through more iterations of this testing, but so far, I have not been able to develop a proof of concept for a true rolling upgrade from 11.1.0.6 to 11.1.0.7. If anyone has been able to do this, please let me know the procedures that were followed.
Thanks,
Mike

ASM upgrade error

I'm trying to upgrade my ASM instance from 10.2.0.4 to 10.2.0.1 using the DBUA but it fails with
ORA-29701: unable to connect to Cluster Manager
This is on Solaris 10
thanks for any tips

Additional Information about the history:
Base: CRS and DB 10.1.0.4
Installing 10.2.0.1 CRS (Clusterware) Home
Installing 10.2.0.1 ASM (DB-Software) Home
Installing 10.2.0.1 DB_1 (DB-Software) Home
Installing 10.2.0.3 Patch CRS
Installing 10.2.0.3 Patch ASM
Installing 10.2.0.3 Patch DB_1
Upgrading ASM with DBUA from 10.1.0.4 to 10.2.0.3
-> ORA-29701: unable to connect to Cluster Manager
Any Advice?

NOT ABLE TO UPGRADE FROM CUE 1.1.2 TO CUE 2.3.1

Hello,
I am trying to upgrade from CUE Ver 1.1.2 TO CUE 3.2.1 by "Upgrading Using the Boot Helper" method
but after uploading the "cue-installer.2.3.1" from the TFTP the system boots up but it does not show me the
"Service Engine Helper Software" Its booting directly and going to the CUE Prompt.
MODULE DETAILS
Module Type: NM
NAME: "NM-SE on Slot 1", DESCR: "NM-SE"
PID: NM-CUE   , VID: NA ,
sh software versions
Installed Packages:
- Core 1.1.2
- Auto Attendant 1.1.2
- Voice Mail 1.1.2
- Boot Loader 1.0.17 Installed Languages: - US English 1.1.2
According to the document
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel2_3/install/upg_boot.html#wpxref53388
After "cue-installer.2.3.1" is loaded i should get the prompt as given below
Welcome to Cisco Systems Service Engine Helper Software
Please select from the following
1       Install software
2       Reload module
(Type '?' at any time for help)
Choice: 1
but i don't see this prompt.Also interestingly I don't see this command
"software download clean pkg ..... " In fact "software" does not appear as an option under any
mode in CLI......
Quick help will be much appreciated!!!!
Thanks & Regards,
Hasan Jafri

Hello Paulo ,
Given below is what i see on the CLI
se-10-1-1-10> reload
Are you sure you want to reload?
Doing a reload will cause any unsaved configuration data to be lost.
Continue[y]? : y
se-10-1-1-10>
MONITOR SHUTDOWN...
EXITED: ${ROOT}/bin/probe exit status 0
EXITED: SQL_startup.sh exit status 0
EXITED: LDAP_startup.sh exit status 0
EXITED: HTTP_startup.sh exit status 0
MONITOR EXIT...
INIT: Remounting device 03:01 ... OK
Done.
Restarting system.
Initializing memory. Please wait. 256 MB SDRAM detected
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...
Booting from flash..., please wait.
[BOOT-ASM]
7Found Intel 82371AB at 0x00000000 ROM address 0x00000000
Please enter '***' to change boot configuration: ***Probing...[EEPRO100]Found I    // I DO THIS AND GO INTO THE BOOT-LOADER
ntel EtherExpressPro100 at 0x00000000 ROM address 0x00000000
Found Intel EtherExpressPro100 at 0x00000000 ROM address 0x00000000
Ethernet addr: 00:14:1C:95:FC:A2
equalizer val: 16
ServicesEngine Bootloader Version : 1.0.17
ServicesEngine boot-loader> boot helper                                 // THEN I TYPE "boot helper"
Probing...[EEPRO100]Found Intel EtherExpressPro100 at 0x00000000 ROM address 0x
00000000
Found Intel EtherExpressPro100 at 0x00000000 ROM address 0x00000000
Ethernet addr: 00:14:1C:95:FC:A2
equalizer val: 16
Me: 10.1.1.10, Server: 10.1.1.55, Gateway: 10.1.1.11
Loading cue-installer.2.3.1                    //AFTER THIS STEP CUE RELOADS IT SELF
Initializing memory. Please wait. 256 MB SDRAM detected
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...
Booting from flash..., please wait.
[BOOT-ASM]
7Found Intel 82371AB at 0x00000000 ROM address 0x00000000
Please enter '***' to change boot configuration: Filesystem type is reiserfs,
partition type 0x83
kf: a1 : (hd0,0)/bzImage root=/dev/hda1 ro plat=nm
kf: a2 : (hd0,0)/bzImage root=/dev/hda1 ro plat=nm
in grub_open: (hd0,0)/bzImage root=/dev/hda1 ro plat=nm
in grub_open1: /bzImage root=/dev/hda1 ro plat=nm
in grub_open2: /bzImage root=/dev/hda1 ro plat=nm
in grub_open3: /bzImage root=/dev/hda1 ro plat=nm 1
in grub_open: (hd0,0)/bzImage root=/dev/hda1 ro plat=nm
in grub_open1: /bzImage root=/dev/hda1 ro plat=nm
in grub_open2: /bzImage root=/dev/hda1 ro plat=nm
in grub_open3: /bzImage root=/dev/hda1 ro plat=nm 1
In verify_kernel_sig
Chksum: final image size: 809372
plat: 1
Debug: bl_sz: 115296
After: buf_len: 2048
After KEY_InitMem
reading key: 0
reading key: 1
reading key: 2
reading key: 3
reading key: 4
reading key: 5
After karr
After 2: buf_len: 2048
sig len : 172
in verifysignature_md5, MD5 hash generated now, str format:hexmd5:bfb41f99bd669
c4df612cb94f2e81764
Verifying signature now...
calling RSA decrypt now
mem ptr: 0 704 832 968 1040 1172 1184 1196 1208 1220 1228 1244 1268 1284 1300 1
316 1332 1344 1360 1384 1400 1664 1804 2080 2224 2364 2880 3396 3660 3924 4188
RSA decrypt returned:33
verifysignature_md5, Orig MD5 hash generated during encryption:bfb41f99bd669c4d
f612cb94f2e81764
Kernel signature verified successfully
In load_imagea1
In load_imagea2
Dbg ********* filemax/data_len/SECSIZ: 809372/2560/512
   [Linux-bzImage, setup=0xa00, size=0xc4d9c]
kernel_func: kt: 3
in boot func: kt: 3
Linux version 2.4.18 (bld_adm@bld-system) (gcc version 2.95.3 20010315 (release)
) #5 Sun Sep 19 22:25:25 PDT 2004
Platform: nm
setup.c: handling flash window at [15MB..16MB]
setup.c: handling kernel log buf at [245.5MB]
setup.c: handling trace buf at [246MB]
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000000f00000 (usable)
BIOS-e820: 0000000000f00000 - 0000000001000000 (reserved)
BIOS-e820: 0000000001000000 - 000000000f580000 (usable)
BIOS-e820: 000000000f580000 - 000000000f600000 (reserved)
BIOS-e820: 000000000f600000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
On node 0 totalpages: 62848
zone(0): 4096 pages.
zone(1): 58752 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda1 ro plat=nm
Initializing CPU#0
Detected 498.673 MHz processor.
In serial_console_setup
Calibrating delay loop... 996.14 BogoMIPS
Memory: 244056k/251392k available (1027k kernel code, 5924k reserved, 661k data,
84k init, 0k highmem)
kdb version 2.3 by Scott Lurndal, Keith Owens. Copyright SGI, All Rights Reserve
d
in atrace_init
log_head: h: 0, t: 5717961, l: 0, w: 0, s: 10484672
Using existing trace log
log_head: h: 0, t: 5717961, l: 0, w: 0, s: 10484672
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xeab9c, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.10 (20020120) Richard Gooch ([email protected])
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Cisco ContentEngine Flash Driver Version 0.02
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
hda: C/H/S=50127/232/176 from BIOS ignored
hdb: C/H/S=0/0/0 from BIOS ignored
hda: IC25N020ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 39070080 sectors (20004 MB) w/1740KiB Cache, CHS=38760/16/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1
device capacity not supported
Flash capacity == 39070080
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.
html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@sa
w.sw.com.sg> and others
eth0: PCI device 8086:1229, 00:14:1C:95:FC:A1, IRQ 9.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 668081-002, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Receiver lock-up workaround activated.
eth1: PCI device 8086:1229, 00:14:1C:95:FC:A2, IRQ 10.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 668081-002, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Receiver lock-up workaround activated.
IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Init drive control
Freeing unused kernel memory: 84k freed
INIT: version 2.84 booting
Started device management daemon v1.3.25 for /dev
reiser root fs ...
Reiserfs super block in block 16 on 0x301 of format 3.6 with standard journal
Blocks (total/free): 4883752/4804594 by 4096 bytes
Filesystem is cleanly umounted
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
FILESYSTEM CLEAN
Remounting the root filesystem read-write...
kernel.sem = 16384 32000 32 128
                Welcome to Cisco Service Engine
Sun Aug 14 21:49:14 PDT 2005
WARNING: Found files describing previous failures...
         Saving them in /var/cores.prev
********** rc.aesop ****************
WARNING: Found files describing previous failures...
         Saving them in /var/javacores
==> eth1 exists, we must be running on a Network Module
==> eth1 exists, we must be running on a Network Module
Router communications servers initializing...complete.
IOS IP Address Registration complete.
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window irtt Iface
10.1.1.0      *               255.255.255.0   U        40 0          0 eth1
127.0.0.0       *               255.0.0.0       U        40 0          0 lo
default         142.1.66.254    0.0.0.0         UG       40 0          0 eth1
Reading Manifest...done.
Reading License ...done.
ModuleType = nm
INIT: Entering runlevel: 2
********** rc.post_install ****************
INIT: Switching to runlevel: 4
INIT: Sending processes the TERM signal
STARTED: cli_server.sh
STARTED: ntp_startup.sh
STARTED: LDAP_startup.sh
STARTED: superthread_startup.sh
STARTED: SQL_startup.sh
STARTED: HTTP_startup.sh
STARTED: ${ROOT}/usr/wfavvid/run
STARTED: ${ROOT}/bin/probe
waiting 132 ...
SYSTEM ONLINE
se-10-1-1-10>
According to the document when the CUE reloads it should give me the option to install the software or reload ?
Am i doing the right way ??
Regards,
Hasan Jafi

Rolling upgrade from 11.2.0.2 to 11.2.0.3

Windows 2008. 2 node RAC
I attempted a rolling upgrade from 11.2.0.2 to 11.2.0.3 in a dev environment in prep to do my prod. I hit all kinds of issues and when googling I found there was a known issue with rolling upgrades between these versions and there was a patch I was meant to have applied before starting the rolling upgrade. I rolled back to 11.2.0.2 but for the life of me, I cant find reference to that patch now.
anyone know what it is?
/still looking/

Hello,
Please refer below document
Things to Consider Before Upgrading to 11.2.0.3 Grid Infrastructure/ASM (Doc ID 1363369.1)
You can check the section related to 11.2.0.2.
It is better to check complete document carefully before attempting the upgrade.
Regards,
Vijay

Deinstall Error for Old Grid Home after Upgrade from 11.2.0.1 to 11.2.0.2

Hi,
I just upgraded from 11.2.0.1 to 11.2.0.2, both the grid infrastructure and the databases, using out-of-place upgrade. There were no errors during the upgrade and was able to deinstall the old database homes with no issues. The configuration we have is two standalone database servers connected to a clustered ASM array.
Now I'm trying to remove the old grid infrastructure home using deinstall. I get the following exception in the log file:
[main] [ 2010-11-17 09:51:50.533 EST ] [CRSDeconfig.getOracleUserGroup:876] Reading Oracle user and group name property values
[main] [ 2010-11-17 09:51:50.533 EST ] [CRSDeconfig.getOracleUserGroup:887] ORACLE_OWNER = grid
[main] [ 2010-11-17 09:51:50.534 EST ] [CRSDeconfig.getOracleUserGroup:925] ORA_DBA_GROUP = oinstall
[Thread-32] [ 2010-11-17 09:51:50.542 EST ] [StreamReader.run:61] In StreamReader.run
[Thread-31] [ 2010-11-17 09:51:50.542 EST ] [StreamReader.run:61] In StreamReader.run
[Thread-31] [ 2010-11-17 09:51:50.980 EST ] [StreamReader.run:65] OUTPUT>NAME=ora.prd11gr2.db
[Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>TYPE=ora.database.type
[Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>TARGET=ONLINE
[Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>STATE=ONLINE on node1
[Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>
[Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>NAME=ora.tst11gr2.db
[Thread-31] [ 2010-11-17 09:51:50.982 EST ] [StreamReader.run:65] OUTPUT>TYPE=ora.database.type
[Thread-31] [ 2010-11-17 09:51:50.982 EST ] [StreamReader.run:65] OUTPUT>TARGET=ONLINE
[Thread-31] [ 2010-11-17 09:51:50.982 EST ] [StreamReader.run:65] OUTPUT>STATE=ONLINE on node2
[Thread-31] [ 2010-11-17 09:51:50.982 EST ] [StreamReader.run:65] OUTPUT>
[main] [ 2010-11-17 09:51:51.086 EST ] [CRSDeconfig.verifyRACDatabases:2570] You must delete or downgrade the Oracle RAC databases and de-install the Oracle RAC homes before attempting to remove the Oracle Clusterware homes.
[main] [ 2010-11-17 09:51:51.086 EST ] [CRSDeconfig.checkConfig:201] Setting DC flag back to false
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.install.db.deinstall.wrapper.clusterDeconfig.callCheckImpl(clusterDeconfig.java:756)
at oracle.install.db.deinstall.wrapper.clusterDeconfig.main(clusterDeconfig.java:329)
Caused by: oracle.ops.util.FatalException: You must delete or downgrade the Oracle RAC databases and de-install the Oracle RAC homes before attempting to remove the Oracle Clusterware homes.
at oracle.ops.util.CRSDeconfig.verifyRACDatabases(CRSDeconfig.java:2573)
at oracle.ops.util.CRSDeconfig.checkConfig(CRSDeconfig.java:236)
at oracle.ops.util.CRSDeconfig.checkConfig(CRSDeconfig.java:198)
Any idea what I missed during the upgrade that makes the deinstall fail?
Thank you!

Hi,
if you upgrade you will not deinstall the old home, but simply remove it with rm.
There should be a MOS Note describing the procedure (It might be necessary as well to update the inventory).
Unfortunately don't have access to MOS atm...
Sebastian

I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

Is it really possible to upgrade from a Treo 650 to a Treo 750?

I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.

Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T)

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine until I deleted an app in error. When I downloaded it from iTunes, my account is no longer recognized by the app's host servers. Can I go back and re-sync one app from my old phone?

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?

Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314

I have just downloaded the upgrade from Mountain Lion to Yosemite. In the process i am now unable to gain access to iTunes. The app on desktop no longer works and the install is not able to be opened.

I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.

Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H.

GI/ASM upgrade from 11.2.0.1 to 11.2.0.3

Similar Messages

Maybe you are looking for