Giving filter to a Allias member only ,not to shared member with the same name
I have a situation that i have to give access to allias member ,with the same name there r a lot of shared member.
Please let me know ,if there is any syntex where i can give access to the member which is tagged as allias .
Access to member ?? Please be clear on it !!
Assuming that you are using Maxl scripts to create filter
create or replace filter 'App'.'db'.'Group Name ' read on '@IDESC("Dimensions") , @IDESC( ) ....';
Later use :
grant filter 'App'.'db'.'Group Name' TO 'Group Name in Shared services';
May be you can create a new Group for the shared members , or it really does not matter .
I am assuming that I got your question correct.
Similar Messages
-
How to access structure in VBScript both Structure and it's only member has the same name
Hello,
I VB Script how to access the structure's member if both the structure and the only member has the same name,
Example,
Structure name is User and it has only one member called "User" with the Datatype of String.
When I call using User.User = "Some Text", it is giving me error so I couldn't assign any value to it.
Kindly help me.
NallasivanI am using VB Script to Access SAP web Services, the sap web service has a method called user change, there are 3 mandatory parameters username, password and passwordX.
Here username is string so I can assign value without any problem, password is a type of Bapipwd. Bapipwd is a structure and it has a member called Bapipwd. To access that from VB script I have to use
Bapipwd.Bapipwd = "Password".
But when I try to put the statement Bapipwd.Bapipwd = "password" it shows an error message that "Bapipwd doesnt have member called Bapipwd".
The passwordX also a structure in SAP with the name of Bapipwdx and it has a member "Bapipwd"
If I user Bapipwdx.Bapipwd="X" it is working fine. Because both the structure and it's member name is different. But Bapipwd.Bapipwd is not working and it gives "Bapipwd doestn't have member Bapipwd"
I suspect this is due to both the structure and its member has the same name. Kindly help me to access the structure. -
How can I merge folder with the same name so that the content does not replace the other
How can I merge folder with the same name so that the content does not replace the other?
>
That's only a good idea if the semantics of sayHello
as defined in MyInterface suggest that a
RemoteException could occur. If not, then you're
designing the interface to suit the way the
implementing classes will be written, which smells.
:-)But in practice you can't make a call which can be handled either remotely or locally without, at some point, dealing with the RemoteException.
Therefore either RemoteException must be part of the interface or (an this is probably more satisfactory) you don't use the remote interface directly, but MyInterface is implemented by a wrapper class which deals with the exception. -
In my iPhoto application when I select switch libraries It shows 2 libraries with the same name, but one has the name is in Capital letters.
They both open the same library which is in the Pictures folder. This is the only library I can see and the name is not in capital letters?
How do I get rid of the one in capital lettersWhat is your iPhoto version?
when I select switch libraries It shows 2 libraries with the same name, but one has the name is in Capital letters.
In the Library Chooser Panel look for the pathes to the two duplicate libraries. You will see the location of the libraries in the path bar at the bottom of the window when you select one of the libraries. Does it show both libraries in the same folder? -
Often times when I copy a CD into my library it will break my CD into multiple albums in my library, each with only a few songs.
Usually this is because there might be songs where the artists has other artists in the song.
How can I compile all of the different albums (all with the same name by the way) back into one as was the original disc?Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2 -
Still using the @mac.com mail address and up to date on everything, but have not gone to Maverick. All of a sudden Mail wouldn't let me delete. Said that title of email was already in trash. And sure enough it was. Clicking on the help button on the message gets Nothing.
The selected topic is currently unavailable.
The topic you were trying to view could not be found.
"couldn’t be copied to “Messages” because an item with the same name already exists."
Any ideas. My mail is not tied to gmail etc.. just all by it's lonesome.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Sometimes when I copy a CD into iTunes all of the songs do not show y up in one album, but mutiple albums, all with the same name. Is there an easy way to get all of the songs into one album.
Generally adding a common album artist will fix things.
tt2 -
purpose: to create photo galleries to insert or not items:
1) with phocagalery, it works
2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see nothing in the media in content management
Can you help meMahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D. -
each time I open Fire Fox I get this error "Firefox could not install the search plugin from "chrome://tnt2toolbar/content/yos.xml" because an engine with the same name already exists." and
I can't search for anything. HELP!!!
Thanks
TomThat is a problem with an extension that tries to install a search bar. The tnt2toolbar should give you a clue about which extension. You didn't add troubleshooting information with the list of installed extensions, so I can't give a suggestion about which extension is causing this.
You can check for problems with preferences.<br />
Rename or delete the prefs.js file and possible numbered prefs-##.js and user.js files to reset all prefs to the default value.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Cannot move messages from mail to trash. Get the following message: messages could not be moved to the mailbox “Trash — “122730.emlx” couldn’t be copied to “Messages” because an item with the same name already exists.
I just started having the same problem but have found no solution.
-
While trying to copy one of my iPhoto libraries to an external hard drive I get the following error message "You can’t copy “iPhoto Library old” because it has the same name as another item on the destination volume, and that volume doesn’t distinguish between upper- and lowercase letters in filenames." There is no other file on the external drive with this name. I have asked this question before and was told that there are some duplicate photos (files) in my library and I needed to go to "show file contents" and look at certain files to find duplicates and delete the duplicates. I did all of this and the library will still not copy and always stops copying in the exact same place on each attempt. Any help would be greatly appreciated.
You've been deleting your actual Photos.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Best way forward now is to recover the surviving Originals from this library and start over from scratch.
Regards
TD -
This has never happened before, and I've tried deleting all photos off my phone then syncing them all instead of specific events and nothing. I have around 10 events in my iphoto library but around 3,500 pictures. I have more than enough space on my phone but I only like to sync certain events, so when I go sync them I notice there are over 40 events listed, and all of them have the same name but it seems as though each "event" has like 2 photos.. On my phone all the different events come up as well. This is super annoying, does anyone know how to fix this ?
I have the exact same problem!
I have about 25 albums and a total of 8,100 pictures. When i go to iTunes -> "My iphone" -> Pictures, and then check the box to sync choses events the list of events is messed up. The same events shows up like 3-4 times and the events only have a couple of pictures in them.
Does anyone know what can be causing this? Or what can be done to fix it?
Using iPhone 4, latest IOS and latest V of Snow Lep.. -
Hi all.
I reported two problems to Apple about my iPhone 4S. The first being that the 3G stopped working (my phone has never been dropped, damaged or gotten wet) and the second that it keeps making a random and incessant beeping sound that can only be described as a "warning tone" even though no notification pops up on the screen and after going through all of the preset tones on the phone, I couldn't find one that matches.
I know that it's not my service provider's fault in regards to the 3G as I've put my SIM card in a friend's iPhone who is on the same network and the 3G worked perfectly fine.
This isn't my gripe, my gripe is that after having explained this to Apple and sending them my phone (I still have about 40 days of my one year warranty), I received it back a few days later with the exact same problems!!!
Has anyone else sent their iDevice off to get "fixed" only to find out that all they did was repackage your item and send it back to you?See if you can force the phone into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. Select restore from backup, follow by syncing your itunes content. -
Multiple databases with the same name ... only one named DB can be found
Hi All
We are currently in the progress of migrating over to APEX 3.2 from HTMLDB 2.1.
We have 3 instances on each version - DEV, UAT, LIV.
The HTMLDB servers and databases are set up with no problems in grid control. However, the new apex instances are not being found (different servers) - I think this has something to do with the names (global database name) being the same as an existing database that is already configured on GC.
Is there a way around this? as we plan to keep both versions of APEX/HTMLDB running in parallel for at least the next few months.
Thanks in advance.
Jake.can you manually discover the new instances on the new server?
Then just make sure the name that appears in Grid Control is different.
e.g. prod.world is on server A and B. When you discover in Grid control, you can make it prod_B and you will see the latter without any problem. -
Multiple form parameters with the same name not passed to remote portlet
I have an html select box that contains several values, and multiple
selection is enabled. When my code runs as a remote portlet, the
following is showing up in the soap monitor when I select multiple
values and submit the form:
<urn:interactionParams>
<urn:portletStateChange>cloneBeforeWrite</urn:portletStateChange>
<urn:interactionState>_action=addEmployeesToGroup</urn:interactionState>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}OldValue">
<urn:value>true</urn:value>
</urn:formParameters>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}">
<urn:value>beatest1</urn:value>
</urn:formParameters>
In this case, I selected beatest1 and beatest2, but only beatest1 comes
through to the remote portlet. Is this a known bug, and, if so, is
there a patch or workaround available?
Thanks in advance,
AndyIf you're not on 8.1.4 move there. 8.1.3 had limitations in the wsrp
release.
wrote:
I have an html select box that contains several values, and multiple
selection is enabled. When my code runs as a remote portlet, the
following is showing up in the soap monitor when I select multiple
values and submit the form:
<urn:interactionParams>
<urn:portletStateChange>cloneBeforeWrite</urn:portletStateChange>
<urn:interactionState>_action=addEmployeesToGroup</urn:interactionState>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}OldValue">
<urn:value>true</urn:value>
</urn:formParameters>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}">
<urn:value>beatest1</urn:value>
</urn:formParameters>
In this case, I selected beatest1 and beatest2, but only beatest1 comes
through to the remote portlet. Is this a known bug, and, if so, is
there a patch or workaround available?
Thanks in advance,
Andy
Maybe you are looking for
-
IPhone only available from Cingular????
Will other cellular companies be able to offer the iPhone? Wouldn't you know it....I just did the 2 year committment with Verizon!!!!!!!!! I'm thinking we need an iPhone topic area.... Powerbook 17 1.33 Mac OS X (10.4.8)
-
Hello, I'm having trouble updating a Credit Memo, I only want to update the comments and I always get the following error: Invalid value [A/P Credit Memo - Reop. Man. Closed/Canc. Orders] [Message 439-173] The credit memo was created from scratch, s
-
Database Querry error when using # in column name
I am using the Database toolkit to work with a MySQL database. Some of the columns in the database have names with special characters: Batch# and Employee#. The database tools give me an error when I try to write data to those fields. I have tried
-
FIM R2 - best practice handling large AD groups
On attempting to create large security group (with 35k users) in AD, i get "dropped connection from the domain controller. The MS AD guy we have attached here tells me that there are some limitations on LDAP and even some known issues with writing 5k
-
How to watch star cricket on Apple TV?
Title says the question?