How to access structure in VBScript both Structure and it's only member has the same name

Hello,
I VB Script how to access the structure's member if both the structure and the only member has the same name,
Example,
Structure name is User and it has only one member called "User" with the Datatype of String.
When I call using User.User = "Some Text", it is giving me error so I couldn't assign any value to it.
Kindly help me.
Nallasivan

I am using VB Script to Access SAP web Services, the sap web service has a method called user change, there are 3 mandatory parameters username, password and passwordX.
Here username is string so I can assign value without any problem, password is a type of Bapipwd. Bapipwd is a structure and it has a member called Bapipwd. To access that from VB script I have to use
Bapipwd.Bapipwd = "Password".
But when I try to put the statement Bapipwd.Bapipwd = "password" it shows an error message that "Bapipwd doesnt have member called Bapipwd".
The passwordX also a structure in SAP with the name of Bapipwdx and it has a member "Bapipwd"
If I user Bapipwdx.Bapipwd="X" it is working fine. Because both the structure and it's member name is different. But Bapipwd.Bapipwd is not working and it gives "Bapipwd doestn't have member Bapipwd"
I suspect this is due to both the structure and its member has the same name. Kindly help me to access the structure.

Similar Messages

I gave my wife my old iPad and it has the same name as my new one. How do I change the name of the old one to allow to have different content on our iPads?

I gave my wife my old iPad when I bought an iPad 2. Both devices have the same name. Will this affect backups of our different contents?

It's easy to rename each unit. When you connect your iPad and it syncs, the unit will appear on the left of the iTUnes screens just click on the unit there and you can rename it. You should do this immediately so you can see which unit was backed up by it's name. You can sync as many decices as you want in one iTunes library and you can even share Apps as long as you're going to sync both from teh same iTunes account. My household has 2 iPad 2s and we share our apps, and we also share downloaded books, magazines, music, etc.......

How to sincronize with itunes an 3G iphone that has the same name as the new 4S

I've just boght a new 4s iphone to substitute my old 3G so when asked by itunes I didn't change the name of the new iphone. Now I have two I phones with the same name and the old one is not able to sinchronize with I tunes any more. It's not even able to restore it self so I could change its name to use it under a different Iphone, does any one have any idea of what can I do to reutlize it,. I'd much appreciate your advise, thank you,
León Nik

It's easy to rename each unit. When you connect your iPad and it syncs, the unit will appear on the left of the iTUnes screens just click on the unit there and you can rename it. You should do this immediately so you can see which unit was backed up by it's name. You can sync as many decices as you want in one iTunes library and you can even share Apps as long as you're going to sync both from teh same iTunes account. My household has 2 iPad 2s and we share our apps, and we also share downloaded books, magazines, music, etc.......

My new Ipad mini has the same name as my old Ipad. Now Itunes will not recognize either Ipad. Do I need to reset both or just the new one? How do I get them to have different names?

My new Ipad named itself the same as my old Ipad. Now neither will be recognized in Itunes. Should I reset new Ipad to factory settings and start over? How do I name it what I want?

To rename them go to Settings>General>About>Name.
Don't start all over again. There are solutions for devices that are not being seen in iTunes. Try those suggestions first.
http://support.apple.com/kb/ts1538

Can we use both 0FI_AP_3 and 0FI_AP_4 for Delta Loads at the same time.....

Hi Gurus:
Currently my company uses 0FI_AP_3 for some A/P reporting. It has been heavily customized & uses Delta loading. However, SAP recommends the use of "0FI_AP_4" for A/P data fro delta loads. I was able to Activate 0FI_AP_4 as well & do some Full Loads in Dev/Test boxes. Question is whether I can use both the extractors for "Delta" loads at the same time......? If there are any issue, what is the issue and how ccan I resolve it? Is the use of only one extractor recommended......??
Please let me know as this impacts a lot of my development....! Thanks....
Best...... ShruMaa
PS: I had posted this in "BI Extractors" forum but there has been no response...... Hope to get some response.......! Thanks

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

How do I rank or rotate a raw and jpg version (combo?)of the same photo with 1 click in Lightroom 4?

Hi, i am new to this forum
I did some searching, but could not find the answer.
I only make stacks of exactly the same photos, but with different formats, mostly 2 jpg versions and a raw. If i change photos further, i unstack that photo, to see the different photos right away.
So, i always want to apply changes to all the photos in a stack, because all basic versions have the same rank, should have the same rotation, and other exif data that i change.
Does anybody know how to always change all photos in a stack in Lightroom?
Thanks!

Hi,
If you shoot RAW+JPEG, there is a spechial option in LR (Preferences>General>Treat JPEG files next to raw files as separted photos) which teats both as one item (unchecked).
All your metadata change is appliled to both, but you do not see the JPEG in LR.
I started with this setting on. But after a while, I recongnized, that I do not want the JPEGs anylonger. Why? Because I did two things:
1. I tried to develop the RAW in a way it looks like the JPEG. Well, O.K. This is only usefull for a very limited number of images (low light, high light) where you have to rescue information from the RAW that is lost in the JPEG. For all other images, it is easier to use the JEPG
2. I developed the RAW in a way that it looks different from the JPEG. I did so, because I want to show this version to others, not the JPEG. Therefore I deleted the JPEG.
There is no way in LR to apply a function / preset to a stack. Only the marked images are affedted. This is the problem with stacks. E.g. you go into a folder with stacks, select all, export all selected and notice, that some images are missing (the ones in the collapsed stack). Every time I got into a folder with stacks and do not want to organize the images, I select "Expand all stacks" from he menu.

Can an Ironport work in both WCCPv2 and L4 Traffic monitoring modes at the same time?

Hello Ciscoers,
We have an ironport installed and we use WCCPv2 to redirect the traffic. And as it occurs, I have a need to forward the traffic for another network, that uses another path to the Internet.
So I was thinking using the L4 Traffic Monitoring.
To the best of your knowledge, is there a way to have the appliance use both WCCPv2 and L4 Traffic monitoring at the same time? From the configuration, it's one or the other.
Thanks,
J.

Ok. I'll try.
As a matter of fact, I plan to use policy-based routing to forward all the "interesting" traffic to the appliance.
For your TCP-Resets not seen, do you allow ingress on the span session?
J.

Can I use both ePrint and AirPrint on an HP4630 at the same time

I have an HP4630 printer that I wish to use with an iPad and Mac Notebook (PowerPC running OS X 10.5.8) and want to know if I can run AirPrint for iPad and ePrint for Mac Notebook at the sametime.
I understand that Mac Notebook can not connect to the printer over the network because it is not capable of running OS X 10.6 and above.
I appreciate your help.
This question was solved.
View Solution.

Hello Chesher5,
Welcome to the HP Support Forums!
Regarding the inquiry into ePrint and AirPrint for the Officejet 4630, yes they can be both used at the same time. They are completely separate means of printing. Both require a network connection though.
If you have any problems setting up or using either, please let me know and I'll do my best to assist.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I have my grandfather's old computer. I have deauthorized his account and authorized mine, it still only has his music and won't allow me to access his. So I uninstalled iTunes and reinstalled it, only to have the same problem on the new iTunes. Help?

It still has all his music, even though it is supposedly "deauthorized" and won't work with my iPod without erasing my information. Has anyone encountered this problem, and does anyone know how to fix it?

Yeah... that's how it works. Signing into iTunes does not magically make a library appear.
If you have an iTunes library (media purchased from iTunes) then YOU need to put it on the computer.
Also, since the computer is no longer authorized for his account, any media associated with his account will not be playable.

How do I break a for loop (inside) and a while loop (outside) at the same time by a control button

I have a while loop (outside) and a for loop (inside) and a control button within the for loop. I want to stop the program by click the botton without finishing the for loop. How can I do that?
Thank you in advance.

HI Please find attached snapshot Regards, Santosh
Message Edited by SanRac on 12-17-2009 05:12 AM
Message Edited by SanRac on 12-17-2009 05:13 AM
Attachments:
Snap1.png ‏4 KB

To access a method frm a class derived frm a base class with the same name

Here' s an example:-
class TestA {
public void start() {
System.out.println("TestA");
class TestB extends TestA {
public void start() {
System.out.println("TestB");
}In main method I do this:-
TestA testA = new TestA();
TestB testB = new TestB();
((TestA)testB).start();Output :-
TestB.
Now when i define the method as static :-
class TestA {
public static void start() {
System.out.println("TestA");
class TestB extends TestA {
public static void start() {
System.out.println("TestB");
}Then output is :-
TestA.
Can anyone let me know that when i say ((TestA)testB).start(); i.e i am type casting TestB obect to it base call then TestA should be printed but it doesn't print but when i declare method as static is does print TestA.
Thanks,
Heena

>
>
Secondly, when i say ((TestA).testB).start(); output is TestB. But when i define start() method as static output is TestA. I need clarity for the same.In the static case, all that the compiler is interested in is the class of the expression before the ".". Because you've put in an explicit cast the type of expression is assumed to be TestA the compiler doesn't know what kind of object will actually be referenced at runtime. In the static case which method is called is determined at compile time.
In the instance method case what determines the method called is determined the class of the actual, run time, value of the expression, and despite your cast, the actual value is still a reference to a TestB instance, so the TestB method is called. In the instance case which method called is determined at run time.

How do I side load my new app to test it when it has the same product ID? I'm going from Pro to Enterprise?

I have created a "new" app (enterprise level) and downloaded the IPA file. I opened iTunes and put the app in the apps folder, then connected my iPad and clicked sync. It shows up in the newsstand but grayed out and as an app icon. This app has the exact product ID as our PRO version. This enterprise app is going to replace our Pro app. What am I over looking or missing? I have been looking at the Adobe publishing companion guide for iPad and iTunes connect… There isn't this scenario in any of the documentation.
Melissa

You have an Enterprise DPS account. Your app type is Multi Folio with Entitlement and iTunes Subscription, which is available only to Enterprise customers. You'll be able to add custom stores and libraries, set up direct entitlement, and take advantage of all DPS Enterprise features. See Creating Proof of Concept Apps for DPS | Adobe Developer Connection for info about adding Enterprise features to a developer app.
Obtaining an Enterprise certificate from Apple is a separate matter. You need an Apple Enterprise developer license ($299/yr instead of $99/yr). Does your company have an Enterprise license with Apple?

Does Pool & Cluster tables has the same structure in both Dictionary and Db

------------ Exists with the same structure both in dictionary as well as in database exactly with the same data and fields
a. Pool Table
b. Cluster Table
c. Transparent Table
d. All the above
To my knowledge, I know transparent table has the same structure in both Dictionary and database.
Can anyone tel me the answer for the above question.. whether it is
c. Transparent table
or
d. All the above

Transparent Table:
A physical table definition in the database for the table definition which is stored in the ABAP Dictionary for transparent tables when the
table is activated. The table definition is translated from the ABAP Dictionary to a definition of the particular database.
A transparent table in the dictionary has one to one relationship with a table in the database.
For each transparent table in the data dictionary there is one associated table in the database.The database table has the same name, the same number of fields and fields have same names as the transparent table definition. Transparent tables are used to hold application data. Application data is master data or transaction data used by an application.
e.g. master data - table of customers
Transaction data - order placed by the customers.
Pooled tables:
Pooled tables can be used to store control data (e.g. screen sequences,program parameters or temporary data). Several pooled tables can be
combined to form a table pool. The table pool corresponds to a physical table on the database in which all the records of the allocated pooledtables are stored.
Pooled table in R/3 has a many to one relationship with a table in the database. For one table in the database there are many tables in the R/3 data dictionary.R/3 uses pooled tables to hold large number of very small tables. You might create a table pool if yoou need to create hundreds of small tables that each hold only a few rows of data.
Cluster tables :
Cluster tables contain continuous text, for example, documentation.Several cluster tables can be combined to form a table cluster. Severallogical lines of different tables are combined to form a physical record in this table type. This permits object-by-object storage or
object-by-object access. In order to combine tables in clusters, atleast parts of the keys must agree. Several cluster tables are stored in
one corresponding table on the database.
A cluster table is similar to pool table . It has many to one relationship with the table in the database.
They are used to hold the data from a few(approximatelly 2 to 10) very large tables. They would be used when these tables have a part of their primary keys in common and if data in these tables are all accessed simultaneously.A cluster is advantageous in the case where data is accessed from multiple tables simultaneously and those tables have at least one of their primary key fields in common.Cluster table reduce number of database reads and thereby improves performance.

How do I make a wired connection to my Airport Extreme that will share the same network as any wireless connection to it?

Here's the set up.
I have a cable router into the house and then an Airport Extreme connected to it. Everything connects wirelessly to the Airport Extreme apart from one computer in the same room as it, which I wired into the AE with a cable (it's a gaming PC and has no wireless).
How can I get that wired machine to use the same network as all the other wireless devices? When I plug the cable into it, the gaming PC only picks up the network being created by the cable box which I don't use.

There is nothing stopping you connecting to the wireless computers if you have sharing turned on..
How can I get that wired machine to use the same network as all the other wireless devices? When I plug the cable into it, the gaming PC only picks up the network being created by the cable box which I don't use.
I don't quite follow this..
If the cable modem is a router.. the AE must be in bridge mode..
So all routing is handled by the cable modem router.. and the wireless clients will all be in the same IP range as the PC is.. please check that by opening the PC command window and type ipconfig /all
Then go to one of the wireless devices and check that it also has the same IP range.. eg,, 192.168.x.x and same router or gateway address eg 192.168.1.1 and same DNS.. which is the same as the router address..
Then in the command window of the PC use the command ping to see if the other devices respond.. ping it by name or by IPaddress.
If there is no response.. windows has decided it is in a public network.. and slammed up the firewalls.. make sure your network is set as home for location.. and make sure the firewalls .. you can have multiple if you have an internet security package are not blocking local network access.
Also remember PC and Mac in a network can take a bit of fiddling to see each other. But ping should always respond and in both directions.

I have two accounts with the same name. One no longer works. Can I delete it without deleting the folders it shares with the other account? How?

Each account has the same name (e.g. both are called [email protected]). The newer one was set up by accident during a conversion from Outlook. Both access the same inbox and sent mail. The two accounts show up as separate in Thunderbird and both have their own inboxes and sent mail boxes. The older one has not updated since the newer one was created, and the older one can no longer reach the server. I want to delete the old one, but am worried that it may delete the folders for the new one in the process. All of the relevant messages are still hosted on the ISP's server. Please advise whether I can do a simple "delete account" on the old account and not wipe out the new one at the same time.

Actually, doing a "delete account" does not delete the folders associated with it. They are still there, but unused. There should not be a problem with doing the "delete account".

How to access structure in VBScript both Structure and it's only member has the same name

Similar Messages

Maybe you are looking for