Gl account heirarchy

Hello,
we have a heirarchy for gl accounts in our BI system replicated from R3.The datasource providing data to it is GSBH_HIERARCHY_TRANSFER_SETS.
Now, we are getting an error when we are running the report.When we run the report based on this Gl heirarchy we have to then give the Gl account number.and then when we press check it comes up with the chart of account and then gl account number.eg it comes up like 2000\gl  account.
But since a couple of days when we are running the report when we press check it is coming up with 2000\20000gl account number.now due to this we when we run the report it comes up with no data available.
when i go and then do selection from within the report we are getting 2 names for one record.One is just the gl account number and the other is 4000gl account number.Now the 4000gl account number shoudnt be in the list.
now i checked the heirarchy nodes whcih are defined and the number ranges given in them is like 4000gl account.
now is it because of this there will be a problem.
in the master data as well we have got 2 records for 1 gl account.One is just tehe gl account number and the other is 4000gl account number.
I tried to delete the 4000 one form the master data but after doing that if i again do a delta load the  record comes up.
please can someone assist me.

Now is it possible that because the heirarchy nodes is beeen defined as 4000xxxx when we are loading attribute data to the cube we are only getting the Gl account number. Is it possible that because as the heirarchy is defined it is creating new record as 4000xxxx in the master data.
Run the transaction datasource in RSA3 and see if you can find this 4000XXXX...may be that made an entry into master data table.
Is there any data stored in heirarchy or not.
Hierarchy data is stored in hierarchy table, no transaction data is stored in the hierarchy table...not sure what exactly you wanted to ask.
When we have a compunded char to a info object and we are defining a heirarchy for it.Will we define the heirarchy nodes as compunded char and then info object.
Like we have controlling area 4000 attached to gl account number rdsd.Now when we define a heirarchy node for this will it be 4000RDSD.
Yes.
What is your question here ?

Similar Messages

  • ACCOUNT HEIRARCHY MANAGER FAILS TO LOAD

    Hi hussein,
    We are in EBS R12 (rup6), and we encounter applet error while lauching the PAYABLES " ACCOUNT HEIRARCHY MANAGER ".
    I tried to search this error on metalink but I only see notes for 11i . :(
    Can you help me please find notes suitable for R12.
    Thanks a lot

    Hi,
    Please see these documents.
    Note: 824998.1 - R12 AHM: Account Hierarchy Manager Doesn't Launch
    Note: 750460.1 - R12: Cannot Launch Account Hierarchy Manager - Error: ExceptionInInitializerError
    Regards,
    Hussein

  • Parent/child reporting

    Hello all,
    I am struggling a bit with a reporting requirement and maybe you as experts can help me to come up with a solution.
    In a report we want to show the turnover of (parent/global) accounts based on a custom field 'expected turnover' in the Opportunity object type. We can show this of course per account, so that's not the problem. The problem is that we want to calculate all the expected turnover for the account in the top of the account hierarchy. We have for example company A (headquarters), which is parent of B, which in turn is the parent of C, which is the parent of D and E. We can do business with all the companies, so they can all have opportunities with the field 'expected turnover' filled out.
    Example:
    Company D has 1 opportunity with an expected turnover of 1,200,000 and another opportunity with an expected turnover of 500,000.
    Company E has 2 opportunities, each with an expected turnover of 450,000
    Company C has one opportunity with an expected turnover of 200,000
    Company B has 1 opportunity with an expected turnover of 1,350,000 and an opportunity with an expected turnover of 750,000.
    Company A has no opportunities at the moment.
    Now we want to report on the total expected turnover for the entire company of which A is headquarters. So we want to know E+D+C+B, but only company B is directly linked to company A, so the question is, how can we report using the indirect links between all the companies.
    We cannot change the account structure, so we cannot say that Company A is the parent on all the accounts. Also we cannot add a field to the account that can select the master account, because there is only one field which allows the user to select another account, and putting the master account or parent account in manually, leaves too much room for errors.
    Does anyone know how this can be solved?
    Thanks in advance.
    Kind regards,
    Niels Rekers

    Niels,
    I know you said you didn't want to put in the master account manually but I think it's the only way. However what if you created a Parent Reporting ID, this will avoid any mistypes of account names? Create a unique identifier for each record and then for those that have a parent account overwite the unique ID with the Parent Id eg
    Company A Parent ID=1234
    Company B Parent ID=1234
    Company C Parent ID=1234 etc
    This would then give you a field that will link your records together without affecting the Account heirarchy.
    Either this or a very long formula that would need modifying every time an account was created.
    These are my only suggestions.
    To maintain this going forwards you create a new "create account" weblink that passes the Parent ID onto the new record, so if they want to create a new account for company F then they go to Company A and click create Account.
    A good way to get a unique ID is to take the last 6 characters of the Row ID into another field as a default value.
    cheers
    Alex

  • Partitioning from ASO to ASO

    Hi ,
    Basically we have a reporting cube (Assume like A) and other cube which holds GL data and adjustments (assume like cube B) both of these are ASO.
    As a part of daily refresh of Cube A (reporting cube). The level zero data is exported and loaded back . And GL data is loaded from a file. Apart from this write back are exported from cube B and then loaded to cube A.generally we maintain three years of write backs in reporting cube.this write back export and import take place as a part of refresh.
    So i created a transparent partition between both cubes source as B and target as A. Things are working fine but problem is like the account heirarchy n some other dimension structures are different in both the cubes so i collected all the members of dimensions and included in the mapping region of partition rather than using (@children,@descendants n all those) as heirarchy is not the same.
    . And the problem here is , business keep adding members under the dimensions. And i cant manually make the changes to include those new members in partition area. Is there any way of dynamically adding newly added members in the partition area.

    What is the problem if you mention @IDESC("Account") in Source and destination Mapping . That way everything is Dynamic . I have a dimension where members keep getting added , I use this simple technique which works well.

  • GL Account summary in Report Painter

    Hi Gurus
    I have a question around Report painter report. We have such reports where the Profit center is based on the PC group set-up in the PCA Master records. The result is that we can analyze our report painter reports by clicking on a heirarchy and view the output for specific PC only. We want to do the same thing for our GL accounts. For example say 10 GL accounts belong to level 1 and 5 belong to level 2. When we clisk level 1 in Report painter report, the output should be only for 10 accounts.
    The issue is that I don't see any place to create GL structure like we have for PC. Can someone please help me if it possible to create suc Account summary nodes?
    Thanks,
    Shalu

    Hi Ajay
    As advised, I created 4 basic sets with set of GL accounts in them. Each of these sets is using table FAGLFLEXT and field being used is RACCT for Account number. Then I tried to create Multiset that will contain these Basic sets. System requires me to enter RACCT field but when I try to save, I cannot. I get this error that field RACCT is used in several Set lines.
    Field RACCT is used in several set lines
    Message no. GS013
    Diagnosis
    You have tried to enter sub-sets for the same table field in several set lines in a multi-set.  However, the sub-sets of a multi-set must each belong to different fields ("dimensions").
    System Response
    The system informs you that the field cannot be used twice.
    Procedure
    You must correct this double usage of the field before storing the set
    Please advise. I appreciate your help.
    Thanks,
    Shalu

  • Report writing with Department and Accounts in rows

    My client, BPC 10 MS, has a reporting need both Departments and Accounts being in the rows.  For example, in the photo below the first two rows are departments, the third is a group of accounts and the fourth is a department.  And then a subtotal is needed.
    I am thinking a heirarchy will help but this is accross dimensions.  Then I thought maybe copy the data to a different grouping of accounts to facilitate.
    Any ideas or suggestions.

    The report will not be static.  Here is what I did for one section of the report. And may have to do it for others as well.  Their are additional requirements that will make this a challenging one as well.
    I made two reports: One with projects in the row axis and one without.  I then used the formula in the function bar (as a local member) to summarize the data.
    What do you think?
    An additional requirement is that in one section I will need to have NET_SALES projects as ALL and the license revenue expanded.  Can this be done in one report?

  • Account Balance Sheet x Inventory Cube BW

    Hi Gurus,
    Need a cube o extractor with  account Balance Sheet x inventory(materials).
    I have 0FIGL_C10 0figl_c10 has all the accounts but not for material balance and 0ic_c03 have all the materials but not the balance sheet accounts, expense accounts only
    Need your help
    Regards

    HI,
    balance sheet is always combination of GL accounts. but you need the functional help for which GL accounts you can use in balcance sheet line items. ex: input material cost, utility cost these all are combination of GL accounts so functional guy will give you the list of GL accounts.
    easy way is creating the heirarchy, since you have the heirarchy copy it and do the changes as per your requirement finaly in your report you just have the heirarchy and key figures are credit and debit etc
    roconsilation alway with the combination of GL accounts. (take some GLA ccounts month wise or fiscal period wise and check in R3 and your BI data target)
    Regards,
    Chandra.

  • Heirarchy Changes not displayed in query

    Hi,
    We are using 0ACCOUNT's heirarchy in a query.We changed the node of a particular range of account numbers from A to B.After changing the heirachy,saved and activated it.
    The problem is when we execute the query,it stil shows that particular range of numbers under the old node A instead of showing it under new node B.
    Any pointers on this would be of great help
    Thanks in Advance,
    Bhagyarekha.

    Hi,
    GO to t-code RSH1 and check first if hiearachy is active.
    Then run the hiearachy attribute change run.
    One helpful url is as follows:-
    http://help.sap.com/saphelp_nw04/Helpdata/EN/80/1a67ece07211d2acb80000e829fbfe/content.htm
    Regards
    Rahul Bindroo

  • Max Number of levels in ECCS FS Item heirarchy

    Is there any limit on the maximum number of levels in EC-CS FS Item heirarchy or Consolidation Group heirarchy ? Is there any limit on the maximum number of sub-group level ?

    Hello,
    you can use up to 30 levels in the hierarchy.
    That's really enough, your accountants have already lost the overview after 10 levels:-)
    Ciao,
    David

  • Jabber Options - Phone Accounts - Voicemail -- "Spinning Wheel"

    Been trying to resolve a nagging issue.   We currently have CUCM 8.6.2-20000-2, CUPS 8.6.4-10000-28 and just put up Unity Conn 9.1.  Jabber Win clients are 9.2(1).   Several people have not been able to integrate voicemail into the Jabber client.  
    We are totally MS AD integrated.   In CUPS, I had Applications -> Cisco Jabber -> Settiings  Credentials Used For Voicemail service set to CUPS so the user would not need to supply credentials.  To help me debug, I went and changed this setting to "Not Set" so that the Phone Accounts option appears in Jabber 4 Win client. 
    So far all the people who do not work access the Phone Accounts setting in the Jabber client see the "Spinning Wheel".   They can't see the fields to enter their AD creds and the voicemail server.   Reinstall of the client does not seem to help.  There seemed to be a bug that described this but I think it was fixed in 9.1(2).  You can't display the Bug description because it contains proprietary info. 
    I have attached a screen shot of my Jabber Client Phone Account -- when I enter the credentials, I log in fine.
    Anyone seen this or know how to fix? 
    TIA --- Perry

    Well, I had TAC look at this issue. Short story is that it was an issue with one of the *many* local cache files which hid the real source of the problem.  I actually had the Mailstore misconfgured in CUPS.  I used the Exchange server's CAS IP instead of Unity Connection.   We created new Mailstore definition that used the Unity Conn IP's, created a new Voicemail Profile and associated the user to that profile.   She worked....
    I deleted my all my Jabber for Windows local cache files and I then received the "spining wheel" issue.  I moved my ID to the new Voicemail Profile with correct Mailstore and I could connect fine.   TAC spent an hour pouring through files on my PC and could not find the reason why my ID was working.   TAC indicates that in 9.x, a lot of this configuration moves to CUCM and hopefully cuts down on these issues!  PRT files from the Jabber client really did not assist them in locating the problem.
    Hope this helps....

  • How can multiple family members use one account?

    My children have iphones, ipads, ipods and mac books, my problem is how do you use home sharing with the devices and not get each others data.  My Husband just added his iphone to the account and got all of my daughters contacts.  I understand they could have there own accounts but if i buy music on itunes and both children want the same song, I don't feel i should have to pay for it twice.  Is there away we can have home sharing on the devices and they can pick and choose what they want? and is this icloud going to make it harder to keep their devices seperate?

    My children have iphones, ipads, ipods and mac books, my problem is how do you use home sharing with the devices and not get each others data.  My Husband just added his iphone to the account and got all of my daughters contacts.  I understand they could have there own accounts but if i buy music on itunes and both children want the same song, I don't feel i should have to pay for it twice.  Is there away we can have home sharing on the devices and they can pick and choose what they want? and is this icloud going to make it harder to keep their devices seperate?

  • How do multiple family members use iTunes.? One account or multiple?

    How do multiple family members use iTunes. One account right now but apps gets added to all devices and iTunes messages go to all devices.  Can multiple accounts be setup and still have ability to share purchased items?

    Hey Ajtt!
    I have an article for you that can help inform you about using Apple IDs in a variety of ways:
    Using your Apple ID for Apple services
    http://support.apple.com/kb/ht4895
    Using one Apple ID for iCloud and a different Apple ID for Store Purchases
    You can use different Apple IDs for iCloud and Store purchases and still get all of the benefits of iCloud. Just follow these steps:
    iPhone, iPad, or iPod touch:
    When you first set up your device with iOS 5 or later, enter the Apple ID you want to use with iCloud. If you skipped the setup assistant, sign in to Settings > iCloud and enter the Apple ID you’d like to use with iCloud.
    In Settings > iTunes and App Stores, sign in with the Apple ID you want to use for Store purchases (including iTunes in the Cloud and iTunes Match). You may need to sign out first to change the Apple ID.
    Mac:
    Enter the Apple ID you want to use for iCloud in Apple () menu > System Preferences > iCloud.
    Enter the Apple ID you want to use for Store purchases (including iTunes in the Cloud and iTunes Match) in Store > Sign In. In iTunes 11, you can also click iTunes Store > Quick Links: Account.
    PC (Windows 8):
    Enter the Apple ID you want to use for iCloud in the Control Panel. To access the iCloud Control Panel, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
    Enter the Apple ID you want to use for Store purchases (including iTunes in the Cloud and iTunes Match) in iTunes. In iTunes 10, select Store > Sign In. In iTunes 11, click iTunes Store > Quick Links: Account.
    PC (Windows 7 and Vista):
    Enter the Apple ID you want to use for iCloud in Control Panel > Network and Internet > iCloud.
    Enter the Apple ID you want to use for Store purchases (including iTunes in the Cloud and iTunes Match) in iTunes 10 in Store > Sign In. In iTunes 11, click iTunes Store > Quick Links: Account.
    Note: Once a device or computer is associated with your Apple ID for your iTunes Store account, you cannot associate that device or computer with another Apple ID for 90 days. Learn more about associating a device or computer to your Apple ID.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Can my family members share our purchases on separate computers with separate accounts?

    We have several apple products in our home and a  new one today.  Is it possible to use these products on different computers sharing all of our purhcases or do we need to stay on one computer on one account?  I know we can do that with the home sharing, but we don't all want all the same things, just some of the purchases.

    Use Find My Friends app instead.   Much easier to manage, and you won't need each other's id/pw's to do it.   They only need to accept your invitations and vice versa.

  • How can I create a new iCloud account for a familiy member having a new iDevice and reuse one of my aliases for it

    Hi there,
    I moved into iCloud from the very beginning and started with one iCloud account for me and my family, making use of email aliases for family members. Now the number of personal iDevices grows and I want to create a new and separate iCloud Account for my son. The pity is, that I reserved his full name already as alias address on my initial iCloud account. If I now delete this alias, can I create a new account with the former alias as new primary email address?
    Or is there at least any transfer procedure supported for aliases between different accounts?
    Thanks for your help, lauterbachj

    Couldn't agree more... the folks who are getting penalized for this are the early adopters of .Mac/iCloud dating from the days when the only way to implement a "family" account was to use aliases. Now all my kids' / my wife's name aliases sit in my account, unable to move. I guess the good news is that if I delete them nobody else will get them, but this seems a pretty poor consolation.
    Would it really be so difficult to implement a "move this alias to another iCloud account" option that requires the "sender" and "receiver" to exchange some sort of code to implement the transation in order to prevent fraud?

  • How can I update my old behance account into a new Adobe ID one?

    My original behance account used an email address that was not linked to my Adobe ID so I ended up creating a new account by accident when prompted by the "Use your Adobe ID below to log in to Behance from now on." Now I can't use my name and I can't access anything from my old account.

    Hi - we can definitely help! To have a private convo where we can give you your accont info, please write us a ticket here and someone will get back to you ASAP:
    Behance Support & Forum : Submit a request for assistance

Maybe you are looking for