Global Scheduled Services Failed in EPPM 8.3

Hi,
I have been trying to configure Primavera with BI publisher. Everything works fine except for a step which requires administrator to enable the GLOBAL SCHEDULED SERVICES option and RUN either one immediately. Each time i tries to Run either one of the Global Schedules Services, it always fails. I have tried it many times over an d over, even with new installation still it fails again.
Anyone could help with this? How to successfully run the GLOBAL SCHEDULES SERVICES?

You can review the below Doc Id on MOS and see if that helps
How To Successfully Configure Initial Project Publication When Publishing A Large Volume Of Projects (Doc ID 1419053.1)
P6 Project Data Is Not Being Published Via The Publication Services (Doc ID 1333858.1)

Similar Messages

Task scheduler service fails to run after windows update

OS: W2008R2x64
We noticed that our daily tasks are not running anymore since the last windows updates few days ago. When running the task scheduler mmc, we get the following:
Looking further, the service did not seems to be running. If we try to start the service we get the follow message:
"The Task Scheduler service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
Now we noticed that did problem started after following updates, though not all machines are infected!!:
Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 R2 x64 Edition (KB2925418)
Security Update for Windows Server 2008 R2 x64 Edition (KB2930275)
Windows Malicious Software Removal Tool x64 - March 2014 (KB890830)
Update for Windows Server 2008 R2 x64 Edition (KB2929733)

Hi,
Here is a similar thread for your reference, please go through it and troubleshoot the issue:
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/task-scheduler-wont-start/11394a52-d7de-496b-880b-733123579b9b
Regards,
Yan Li
Regards, Yan Li

What is causing my "Publish Enterprise Summaries" in Global Scheduled Services to fail

We are a relatively new P6 installation. Publish Enterprise Summaries has failed from the beginning. The only error I see in the log file is below. Any clue to what we need to fix?
2014-10-21 06:37:57:[TASK]:[PxEpsSpread]: [4] CORE(SQL): Errors occurred when executing following statement: DECLARE vupdate_date varchar2(20); msg varchar(2000); vspid number; vtotal pls_integer := 0; vupd pls_integer := 0; vins pls_integer := 0; i_start pls_integer; i_end pls_integer; vsec number; vrate number; start_time timestamp; end_time timestamp; vmsg varchar2(1000); vmsg_cnt pls_integer := 0; df varchar2(22) := 'yyyy-mm-dd hh24:mi:ss'; vparent_wbs_id projwbs.parent_wbs_id%type; vobs_id obs.obs_id%type; vobs_name obs.obs_name%type; BEGIN vupdate_date := :update_date; vspid := sys_context('USERENV', 'SID') ; i_start := dbms_utility.get_time; execute immediate 'select current_timestamp from dual' into start_time; for erec in (SELECT distinct eh.parentobjectid FROM project p, projwbs pw, epshierarchy eh WHERE p.project_flag='Y' and p.proj_id = pw.proj_id and pw.proj_node_flag ='Y' and eh.childobjectid = pw.parent_wbs_id and p.orig_proj_id IS NULL and p.px_last_update_date > to_date(vupdate_date,'yyyy-mm-dd hh24:mi:ss') ) LOOP select parent_wbs_id, pw.obs_id, o.obs_name into vparent_wbs_id, vobs_id, vobs_name from projwbs pw, obs o where pw.obs_id = o.obs_id and pw.wbs_id = erec.parentobjectid; DELETE /*+ INDEX(EPSSPREAD NDX_EPSSPREAD_OBJID) */ FROM EPSSPREAD where ObjectID = erec.parentobjectid; INSERT INTO EpsSpread (OBJECTID ,ID ,NAME ,PARENTOBJECTID ,PROJECTOBJECTID ,OBSOBJECTID ,OBSNAME ,STARTDATE ,ENDDATE ,ACTUALLABORUNITS ,ACTUALNONLABORUNITS ,ATCOMPLETIONLABORUNITS ,ATCOMPLETIONNONLABORUNITS ,BASELINEPLANNEDLABORUNITS ,BASELINEPLANNEDNONLABORUNITS ,EARNEDVALUELABORUNITS ,ESTIMATEATCOMPLETIONLABORUNITS ,ESTIMATETOCOMPLETELABORUNITS ,PLANNEDVALUELABORUNITS ,REMAININGLABORUNITS ,REMAININGNONLABORUNITS ,ACTUALCOST ,ACTUALEXPENSECOST ,ACTUALLABORCOST ,ACTUALMATERIALCOST ,ACTUALNONLABORCOST ,ACTUALTOTALCOST ,ATCOMPLETIONEXPENSECOST ,ATCOMPLETIONLABORCOST ,ATCOMPLETIONMATERIALCOST ,ATCOMPLETIONNONLABORCOST ,ATCOMPLETIONTOTALCOST ,BASELINEPLANNEDEXPENSECOST ,BASELINEPLANNEDLABORCOST ,BASELINEPLANNEDMATERIALCOST ,BASELINEPLANNEDNONLABORCOST ,BASELINEPLANNEDTOTALCOST ,EARNEDVALUECOST ,ESTIMATEATCOMPLETIONCOST ,ESTIMATETOCOMPLETECOST ,PLANNEDVALUECOST ,REMAININGEXPENSECOST ,REMAININGLABORCOST ,REMAININGMATERIALCOST ,REMAININGNONLABORCOST ,REMAININGTOTALCOST ) SELECT a.objectid, a.id, a.name, a.parentobjectid, a.projectobjectid, a.obsobjectid, a.obsname, a.startdate, a.enddate, a.ACTUALLABORUNITS, a.ACTUALNONLABORUNITS, a.ATCOMPLETIONLABORUNITS, a.ATCOMPLETIONNONLABORUNITS, a.BASELINEPLANNEDLABORUNITS, a.BASELINEPLANNEDNONLABORUNITS, a.EARNEDVALUELABORUNITS, a.ESTIMATEATCOMPLETIONLABORUNITS, a.ESTIMATETOCOMPLETELABORUNITS, a.PLANNEDVALUELABORUNITS, a.REMAININGLABORUNITS, a.REMAININGNONLABORUNITS, a.ACTUALCOST, a.ACTUALEXPENSECOST, a.ACTUALLABORCOST, a.ACTUALMATERIALCOST, a.ACTUALNONLABORCOST, a.ACTUALTOTALCOST, a.ATCOMPLETIONEXPENSECOST, a.ATCOMPLETIONLABORCOST, a.ATCOMPLETIONMATERIALCOST, a.ATCOMPLETIONNONLABORCOST, a.ATCOMPLETIONTOTALCOST, a.BASELINEPLANNEDEXPENSECOST, a.BASELINEPLANNEDLABORCOST, a.BASELINEPLANNEDMATERIALCOST, a.BASELINEPLANNEDNONLABORCOST, a.BASELINEPLANNEDTOTALCOST, a.EARNEDVALUECOST, a.ESTIMATEATCOMPLETIONCOST, a.ESTIMATETOCOMPLETECOST, a.PLANNEDVALUECOST, a.REMAININGEXPENSECOST, a.REMAININGLABORCOST, a.REMAININGMATERIALCOST, a.REMAININGNONLABORCOST, a.REMAININGTOTALCOST FROM (select /*+ INDEX(EH NDX_EPSHIER_PARENTOBJ) INDEX(PS NDX_PROJSPREAD_PARENTEPSID) */ eh.parentObjectid objectid, eh.parentid ID, eh.parentname NAME, vparent_wbs_id ParentObjectId, eh.parentprojectid ProjectObjectId, vobs_id ObsObjectId, vobs_name ObsName, ps.startdate,ps.enddate, SUM(ps.ACTUALLABORUNITS) ACTUALLABORUNITS, SUM(ps.ACTUALNONLABORUNITS) ACTUALNONLABORUNITS, SUM(ps.ATCOMPLETIONLABORUNITS) ATCOMPLETIONLABORUNITS, SUM(ps.ATCOMPLETIONNONLABORUNITS) ATCOMPLETIONNONLABORUNITS, SUM(ps.BASELINEPLANNEDLABORUNITS) BASELINEPLANNEDLABORUNITS, SUM(ps.BASELINEPLANNEDNONLABORUNITS) BASELINEPLANNEDNONLABORUNITS, SUM(ps.EARNEDVALUELABORUNITS) EARNEDVALUELABORUNITS, SUM(ps.ESTIMATEATCOMPLETIONLABORUNITS) ESTIMATEATCOMPLETIONLABORUNITS, SUM(ps.ESTIMATETOCOMPLETELABORUNITS) ESTIMATETOCOMPLETELABORUNITS, SUM(ps.PLANNEDVALUELABORUNITS) PLANNEDVALUELABORUNITS, SUM(ps.REMAININGLABORUNITS) REMAININGLABORUNITS, SUM(ps.REMAININGNONLABORUNITS) REMAININGNONLABORUNITS, SUM(ps.ACTUALCOST) ACTUALCOST, SUM(ps.ACTUALEXPENSECOST) ACTUALEXPENSECOST, SUM(ps.ACTUALLABORCOST) ACTUALLABORCOST, SUM(ps.ACTUALMATERIALCOST) ACTUALMATERIALCOST, SUM(ps.ACTUALNONLABORCOST) ACTUALNONLABORCOST, SUM(ps.ACTUALTOTALCOST) ACTUALTOTALCOST, SUM(ps.ATCOMPLETIONEXPENSECOST) ATCOMPLETIONEXPENSECOST, SUM(ps.ATCOMPLETIONLABORCOST) ATCOMPLETIONLABORCOST, SUM(ps.ATCOMPLETIONMATERIALCOST) ATCOMPLETIONMATERIALCOST, SUM(ps.ATCOMPLETIONNONLABORCOST) ATCOMPLETIONNONLABORCOST, SUM(ps.ATCOMPLETIONTOTALCOST) ATCOMPLETIONTOTALCOST, SUM(ps.BASELINEPLANNEDEXPENSECOST) BASELINEPLANNEDEXPENSECOST, SUM(ps.BASELINEPLANNEDLABORCOST) BASELINEPLANNEDLABORCOST, SUM(ps.BASELINEPLANNEDMATERIALCOST) BASELINEPLANNEDMATERIALCOST, SUM(ps.BASELINEPLANNEDNONLABORCOST) BASELINEPLANNEDNONLABORCOST, SUM(ps.BASELINEPLANNEDTOTALCOST) BASELINEPLANNEDTOTALCOST, SUM(ps.EARNEDVALUECOST) EARNEDVALUECOST, SUM(ps.ESTIMATEATCOMPLETIONCOST) ESTIMATEATCOMPLETIONCOST, SUM(ps.ESTIMATETOCOMPLETECOST) ESTIMATETOCOMPLETECOST, SUM(ps.PLANNEDVALUECOST) PLANNEDVALUECOST, SUM(ps.REMAININGEXPENSECOST) REMAININGEXPENSECOST, SUM(ps.REMAININGLABORCOST) REMAININGLABORCOST, SUM(ps.REMAININGMATERIALCOST) REMAININGMATERIALCOST, SUM(ps.REMAININGNONLABORCOST) REMAININGNONLABORCOST, SUM(ps.REMAININGTOTALCOST) REMAININGTOTALCOST FROM projectspread ps,epshierarchy eh WHERE eh.childobjectid = ps.parentepsobjectid AND eh.parentobjectid = erec.parentobjectid group by eh.parentObjectid, eh.parentid, eh.parentname, vparent_wbs_id, eh.parentprojectid, vobs_id, vobs_name, ps.startdate, ps.enddate ) a; vins := vins+SQL%ROWCOUNT; commit; END LOOP; vtotal := vins; i_end := dbms_utility.get_time; execute immediate 'select current_timestamp from dual' into end_time; vsec := round(( (i_end-i_start) * 0.01), 3); if vsec > 0 then vrate := round( vtotal / vsec , 3); else vrate := 0; end if; vmsg := 'Success[true],' || ' Start[' || to_char(start_time, df) || '], End[' || to_char(end_time, df) || '], ' || ' Elapsed[' || trim(to_char(vsec, '99999.99')) || 's], ' || ' Count[' || trim(to_char(vtotal, '999999999')) || '], ' || ' Throughput[' || trim(to_char(vrate, '99999999.99')) || '/s], ' || ' Pages[1], ' || ' Inserted[' || trim(to_char(vins, '999999999')) || '], ' || ' Updated[' || trim(to_char(vupd, '999999999')) || ']'; vmsg_cnt := vmsg_cnt + 1; DBMS_OUTPUT.PUT_LINE(vmsg); EXCEPTION when others then ROLLBACK; vmsg := 'Success[false]'; vmsg_cnt := vmsg_cnt + 1; DBMS_OUTPUT.PUT_LINE(vmsg); vmsg := SQLERRM; vmsg_cnt := vmsg_cnt + 1; DBMS_OUTPUT.PUT_LINE(vmsg); raise; END;

>
Efstratios Karaivazoglou wrote:
> Which version of BOBJ (incl. SP and FP) are you using?
>
> Regards,
>
> Stratos
BusinessObjects XI 3.1 SP2
FixPack 2.6
Edited by: Erika Atencio on Sep 1, 2010 8:46 PM

"Publish Project" Failed in EPPM 8.3 WEB

Hi,
I have been trying to Integrate BI PUBLISHER with P6 EPPM 8.3. At one stage it requires administrator to select either one project and choose "PUBLISH PROJECT" option. Each time i tried to Publish a project, the status always fails. Is there anything i need to do in order to successfully Publish the Project Successfully? I have also Enabled the "Publish project" options in Application Settings under the Services Section.
Anyone can help on this?
Thanks and Regards

First make sure that Global schedule services are run successfully. You can refer to MOS Doc id
How To Successfully Configure Initial Project Publication When Publishing A Large Volume Of Projects (Doc ID 1419053.1)
P6 Project Data Is Not Being Published Via The Publication Services (Doc ID 1333858.1)
This will help you to properly configure publication services

Creation of InitialContext fails when i hot-deploy scheduler-service.xml

Creation of InitialContext fails when i hot-deploy scheduler-service.xml
I configured scheduler-service as follows in Jboss 3.2:
scheduler-service.xml
<mbean code="org.jboss.varia.scheduler.Scheduler"
     name=":service=Scheduler">
<attribute name="StartAtStartup">true</attribute>
<attribute name="SchedulableClass">com.beta.my.utils.FMScheduler</attribute>
<attribute name="SchedulableArguments">Schedulabe Test,12345</attribute>
<attribute name="SchedulableArgumentTypes">java.lang.String,int</attribute>
<attribute name="InitialStartDate">0</attribute>
<attribute name="SchedulePeriod">10000</attribute>
<attribute name="InitialRepetitions">-1</attribute>
</mbean>
Schedulable Class
package com.beta.my.utils;
import java.util.Date;
import org.jboss.varia.scheduler.Schedulable;
public static class FMScheduler
implements Schedulable
private String mName;
private int mValue;
public FMScheduler(String pName,int pValue)
mName = pName;
mValue = pValue;
public void perform(Date pTimeOfCall,long pRemainingRepetitions)
try {
          Context context = new InitialContext();//properties taken from jndi.properties file
          } catch (Exception e){
               e.printStackTrace();
I started my jboss..,FMScheduler created successfully, perform method in FMScheduler called succesfully after SchedulePeriod(1000)
The problem occurs(NullPointerException) while i changed SchedulePeriod time and hot-deployed(just saved scheduler-service.xml).
The following Exception occures due to InitialContext creation fails*(Context context = new InitialContext();)* in FMScheduler.
17:46:27,361 ERROR [STDERR] java.lang.NullPointerException
17:46:27,361 ERROR [STDERR] at org.jboss.mx.loading.UnifiedClassLoader.findR
esources(UnifiedClassLoader.java:374)
17:46:27,361 ERROR [STDERR] at java.lang.ClassLoader.getResources(ClassLoade
r.java:825)
17:46:27,361 ERROR [STDERR] at com.sun.naming.internal.VersionHelper12$5.run
(VersionHelper12.java:145)
17:46:27,361 ERROR [STDERR] at java.security.AccessController.doPrivileged(N
ative Method)
17:46:27,377 ERROR [STDERR] at com.sun.naming.internal.VersionHelper12.getRe
sources(VersionHelper12.java:142)
17:46:27,377 ERROR [STDERR] at com.sun.naming.internal.ResourceManager.getAp
plicationResources(ResourceManager.java:468)
17:46:27,377 ERROR [STDERR] at com.sun.naming.internal.ResourceManager.getIn
itialEnvironment(ResourceManager.java:159)
17:46:27,377 ERROR [STDERR] at javax.naming.InitialContext.init(InitialConte
xt.java:215)
17:46:27,377 ERROR [STDERR] at javax.naming.InitialContext.<init>(InitialCon
text.java:195)
17:46:27,377 ERROR [STDERR] at com.beta.my.utils.FMScheduler.perform
(FMScheduler.java:42)
17:46:27,392 ERROR [STDERR] at org.jboss.varia.scheduler.Scheduler$Listener.
handleNotification(Scheduler.java:1263)
17:46:27,392 ERROR [STDERR] at org.jboss.mx.server.NotificationListenerProxy
.handleNotification(NotificationListenerProxy.java:69)
17:46:27,392 ERROR [STDERR] at javax.management.NotificationBroadcasterSuppo
rt.sendNotification(NotificationBroadcasterSupport.java:95)
17:46:27,392 ERROR [STDERR] at javax.management.timer.Timer.sendNotification
s(Timer.java:441)
17:46:27,392 ERROR [STDERR] at javax.management.timer.Timer.access$000(Timer
.java:31)
17:46:27,408 ERROR [STDERR] at javax.management.timer.Timer$RegisteredNotifi
cation.doRun(Timer.java:612)
17:46:27,408 ERROR [STDERR] at org.jboss.mx.util.SchedulableRunnable.run(Sch
edulableRunnable.java:164)
17:46:27,408 ERROR [STDERR] at org.jboss.mx.util.ThreadPool$Worker.run(Threa
dPool.java:225)
please help me if u have any idea,thanks

Hi Hamsa,
Did you also create and configure an "Execution Destination"?
You can test the Metadata destination configuration on Web Service Navigator.
On the web service navigator (http://hostname:portnumber/wsnavigator) search in the metatda destination you have created for the service you imported in web dynpro as a model. If you can find it there test it on the ws navigator.
Best regards,
Yasar

Scheduler Service Status failed - XIMDD Upgrade to 9.1.0.2 BP09

Diagnostic Dashboard Test Result failed Scheduler Service Status
Details:
java.io.FileNotFoundException: http:/10.10.10.11:80/xlScheduler/ddstatus
at sun.nt.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1147)
I noticed that per documentation file <ORACLE_HOME>/j2ee/OAS_INSTANCE_NAME/application-deployments/XIMDD/orion-application.xml should be modified (<imported-shared-libraries></imported-shared-libraries> replaced with .....) But my original file does not have lines <imported-shared-libraries>
Could this be related to the patch level on Oracle Application Server?
I use 10.1.3.3 without additional patches
I would appreciate any feedback

Did anybody have the same error?

BI Scheduler services not starting

Hi,
I am trying to use BI Scheduler for the first time. for this purpose i am following this link of Venkatakrishnan J
http://oraclebizint.wordpress.com/2007/09/13/oracle-bi-ee-10133-configuring-delivers-ibots
i have configured the first 5 steps but i am not able to understand what to do next.......... what to change and check in instanceconfig.xml.
2nd problem is my BI Scheduler services are not starting and error is could not start oracle bi scheduler service on local computer
lastly what is OCI and its functionality.... should i have to install it separately as i read that it should be installed for scheduler
these might be ordinary questions but i am a new learner.......... so....
Regards,
Mimran

hi,
thanks for help sir. i am able to start schedule service but now i am getting another problem. when i configure my account (More Products>Delivers>My Account) at the bottom i found an error
System Delivery Profile not available:
Error finding SA System subject area. See the Oracle BI Presentation Server log for details. you can see the pic as well
http://202.59.89.124/tes/myaccount.jpg
But i ignored the problem and completed the rest of process. i configured the iBot and tried to send a report on my email address and dashboard. so as expected i did't received any alert. in the presentation server log file the error was
Type: Error
Severity: 42
Time: Wed May 20 11:19:40 2009
File: project/websubsystems/ssremote.cpp Line: 1515
Properties: ThreadID-4336;HttpCommand-IBotPicker;RemoteIP-172.170.9.113;User-Administrator
Location:
*     saw.httpserver.request*
*     saw.rpc.server.responder*
*     saw.rpc.server*
*     saw.rpc.server.handleConnection*
*     saw.rpc.server.dispatch*
*     saw.threadPool*
*     saw.threads*
****kmsgNoDisconnectedApplicationFound: message text not found ****
and if i go to the iBot log file the error is like this
+++ ThreadID: 1494 : 2009-05-20 10:42:30.171
*Global Error: [nQSError: 77006] Oracle BI Presentation Server Error: Authentication failed.*
Error Codes: WKY9UVRD:
Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
*State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.*
*[nQSError: 43001] Authentication failed for Administrator in repository Star: invalid user/password. (08004)*
lastly in scheduler configuration in the iBot tab the presentation server name and port is ..........see pic below
http://202.59.89.124/tes/jobmanager.jpg
does this mean presentation server which is on port 9704 actually ...... should i change it........
any help sir,.....................
Regards,
Mimran

KM Scheduler Service Properties

Hello experts. I am trying to build a scheduler service in KM that runs an RFC, retrieves some data and stores it into KM once a day. To do this, I tried starting with JCA but that did not work so I ended up using the IConnectionFactory framework and it does work. However, in using that, I have to put the SAP system values and the User ID/Password in the connection properties. I do not want to put this in the code so I wanted to create properties exposed in the System Config -> Knowledge Management -> Content Management -> Global Services -> Scheduler Tasks -> My Scheduler Service. That way, I can maintain those properties there and use them in my code. However, since I do not have experience with the Scheduler Service, I do not know how to expose and read those properties. In a regular component, I would put it in portalapp.xml but it does not seem to work for this one. So, could someone guide me on where to put those properties and how as well as the Java code to read them in at runtime.
Would really appreciate any help.

Hi
Did you find a solution fo this problem?
Florin

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

Installation issue : sql server 2008 r2 some services failed to installed on windows 7

I have been facing this problem while installing sql server 2008 r2.. i tried so many times but same result .. it shows sql server installed with some errors
database engine service : failed
SQL Server Replication : failed
Full-Text Search : failed
Analysis Services : failed
Reporting Services : failed
And my Log file (or) summary file is (it is in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log):
Overall summary:
Final result:                  User cancelled
Exit code (Decimal):           -2068380094
Exit facility code:            1207
Exit error code:               1602
Exit message:                  User has cancelled.
Start time:                    2014-08-14 21:15:26
End time:                      2014-08-14 21:23:58
Requested action:              AddNode
Machine Properties:
Machine name:                  MANJU-PC
Machine processor count:       4
OS version:                    Windows Vista
OS service pack:
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x86
Process architecture:          32 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            Database Engine Services
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            SQL Server Replication
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            Full-Text Search
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSAS10.MSSQLSERVER             Analysis Services
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSRS10.MSSQLSERVER             Reporting Services
1033                                      10.0.1600.22
No
Sql Server 2008
Management Tools - Basic                 1033                 Developer Edition
10.0.1600.22    No
Sql Server 2008
Management Tools - Complete              1033                 Developer Edition    10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity                1033                 Developer Edition    10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility     1033                 Developer Edition    10.0.1600.22    No
Sql Server 2008
Client Tools SDK                         1033
Developer Edition    10.0.1600.22    No
Sql Server 2008
Integration Services                     1033                 Developer Edition
10.0.1600.22    No
Package properties:
Description:                   SQL Server Database Services 2008
SQLProductFamilyCode:          {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName:                   SQL2008
Type:                          RTM
Version:                       10
SPLevel:                       0
Installation location:         D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\x86\setup\
Installation edition:          DEVELOPER
User Input Settings:
ACTION:                        AddNode
AGTSVCACCOUNT:                 <empty>
AGTSVCPASSWORD:                *****
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 *****
CONFIGURATIONFILE:
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERNETWORKNAME:    <empty>
FTSVCACCOUNT:                  <empty>
FTSVCPASSWORD:                 *****
HELP:                          False
INDICATEPROGRESS:              False
INSTANCENAME:                  <empty>
MEDIASOURCE:                   D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\
PID:                           *****
QUIET:                         False
QUIETSIMPLE:                   False
SQLSVCACCOUNT:                 <empty>
SQLSVCPASSWORD:                *****
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\ConfigurationFile.ini
Detailed results:
Feature:                       Integration Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Client Tools Connectivity
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Management Tools - Complete
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Client Tools SDK
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Client Tools Backwards Compatibility
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Business Intelligence Development Studio
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CancelException
    Message:
        User has cancelled.
    Stack:
        at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
        at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.SubmitAndWait(Request request)
        at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
        at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceService.Waypoint(String moniker)
        at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
        at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)

Requested action:              AddNode
OS architecture:               x86
Process architecture:          32 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            Database Engine Services
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            SQL Server Replication
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            Full-Text Search
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSAS10.MSSQLSERVER             Analysis Services
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSRS10.MSSQLSERVER             Reporting Services
1033                                      10.0.1600.22
No
Sql Server 2008
Management Tools - Basic                 1033                 Developer Edition
10.0.1600.22    No
Sql Server 2008
Management Tools - Complete              1033                 Developer Edition    10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity                1033                 Developer Edition    10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility     1033                 Developer Edition    10.0.1600.22    No
Sql Server 2008
Client Tools SDK                         1033
Developer Edition    10.0.1600.22    No
Sql Server 2008
Integration Services                     1033                 Developer Edition
10.0.1600.22    No
Instead of installing SQL server instance you selected add node which is to be selected when SQL server installation is to be made on Node which is being added to cluster. Since your OS is not clustered I am sure you selected worng option.
Please right click on setup file and select run as administrator. Now installation window which pops up on that on left hand side select
installation and then on page that appears select 'New server standalone installation or add feature to existing installation'.
You already have SQL server 2008 installed on your machine as per feature discovery report
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed

Hello,
I am trying to install Microsoft SQL Server 2008 R2. I get the error bellow (Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed). I already have a copy of SQL Server 2008 R2 on the machine.
I want to create a new named instance of SQL Server for some software I'm installing.
The error is below.
Any help would be much appreciated, thanks!
Overall summary:
Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal):           -595541211
Exit facility code:            1152
Exit error code:               49957
Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time:                    2014-02-06 09:14:09
End time:                      2014-02-06 11:18:16
Requested action:              Install
Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Exception help link:           http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x44D4F75E%400xDC80C325
Machine Properties:
Machine name:                  BAHPBZ52TY
Machine processor count:       4
OS version:                    Windows 7
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Sql Server 2008 R2   SQLEXPRESS           MSSQL10_50.SQLEXPRESS          Database Engine Services
1033                 Express Edition      10.50.1600.1    No
Sql Server 2008 R2
Management Tools - Basic                 1033                 Express Edition
10.50.1600.1    No
Package properties:
Description:                   SQL Server Database Services 2008 R2
ProductName:                   SQL Server 2008 R2
Type:                          RTM
Version:                       10
Installation location:         c:\c7ced2c86d6b9813b28186cc831c2054\x64\setup\
Installation edition:          EXPRESS_ADVANCED
Slipstream:                    True
SP Level                       1
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      True
AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Disabled
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASDOMAINGROUP:                 <empty>
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 *****
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU:                    True
ENU:                           True
ERRORREPORTING:                False
FARMACCOUNT:                   <empty>
FARMADMINPORT:                 0
FARMPASSWORD:                  *****
FEATURES:                      SQLENGINE,REPLICATION,FULLTEXT,RS,SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD:                 *****
HELP:                          False
INDICATEPROGRESS:              False
INSTALLSHAREDDIR:              c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    aedt2bSQL
INSTANCENAME:                  AEDT2BSQL
ISSVCACCOUNT:                  NT AUTHORITY\NetworkService
ISSVCPASSWORD:                 *****
ISSVCSTARTUPTYPE:              Automatic
NPENABLED:                     0
PASSPHRASE:                    *****
PCUSOURCE:                     c:\c7ced2c86d6b9813b28186cc831c2054\PCUSOURCE
PID:                           *****
QUIET:                         False
QUIETSIMPLE:                   False
ROLE:                          AllFeatures_WithDefaults
RSINSTALLMODE:                 DefaultNativeMode
RSSVCACCOUNT:                  NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD:                 *****
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         *****
SECURITYMODE:                  SQL
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD:                *****
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           BAH\568385
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  False
TCPENABLED:                    0
UIMODE:                        AutoAdvance
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\ConfigurationFile.ini
Detailed results:
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0xDC80C325
Configuration error description: Access is denied
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature:                       SQL Client Connectivity SDK
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0xDC80C325
Configuration error description: Access is denied
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature:                       Full-Text Search
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0xDC80C325
Configuration error description: Access is denied
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature:                       Reporting Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0xDC80C325
Configuration error description: Access is denied
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature:                       Management Tools - Basic
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Microsoft Sync Framework
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\SystemConfigurationCheck_Report.htm

Hello,
If you see error descriptioon it gives access denied so basically it is because of some access issue.I guess You must be using some domin account for installation make sure it is added as local administrator also instead of using NT Authority network
service as SQL server service account use local system account .
Below link would help
http://serverfault.com/questions/212135/access-is-denied-error-installing-sql-server-2008-on-windows-7
You can also browse to setup.exe file and RK on it and select run as administrator
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Email notification or remedy ticket creation if BI services fails

Hi All,
we are using OBIEE 10.1.3.4.X version as our production instance.
we want to set up email notification for a group if any of the BI services fails ( presentation services, Javahost service, Scheduler service etc ). We have 2 unix servers where we check the current status of above services.
Can anybody provide me information to do the same in Unix. I heard like we can write Unix script and that can be placed in Unix box to meet above requirement. Was any body faced similar issue, any body have successfully implemented to your projects.
How will you get notified if you are suing obiee 10g in your projects
Please let me know your thoughts.
Regards,
Yuva

Hi ..
Above mentioned weblinks gives information on OBIEE 11g. We are using OBIEE10g.
It would be helpful, if anybody provides information on getting email notification if any of BI services fails. I guess, as all the BI services are maintained by Unixbox, we need to write Unix script for the same.
Thanks and Regards,
Yuva

Essbase registration to Shared Services failed - Hyp 11.1.1.3 on 2 Win XP

Hi All,
I have Hyperion 11.1.1.3 installation on two XP Pro machines. Pure system, with no global policies, firewalls, etc. My users are in Administrators group. Computers are not in any domain also.
On first server (called HypTSerwer1) there is: Foundation (Shared Services Web Application and OpenLDAP Service)
On second server (called HypTSerwer3) there are: Oracle DB (10R2) + Essbase Services Server 32-bit
I've configured Shared Services, I can log as admin to Shared Services Console without any problem. Validation report contains all greens.
But when I try to configure HypTSerwer3 (essbase) I get: Register with Shared Services Failed. Validation report contains one failure in Hyperion Foundation (
EXT: External Authentication Check Native Directory external authentication provider configuration
Error: Provider is not reachable
Recommended Action: Check Shared Services Configuration
)(OpenLDAP is green and runs fine)
In HypTSerwer3 in C:\Hyperion\logs\config\SharedServices_Security_Client.txt I found:
Got hub location from Registry:http://HypTSerwer1:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
Got native directory location from Registry::28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
URL constructed out of values in Registry database:ldap://:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
27:1112:Failed to connect to at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
27:1112:Failed to connect to at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory. [Root Cause: 27:1112:Failed to connect to at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
Native Directory is not reachable. Attempting to re-connect... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
The part connect to at 28089* looks strange for me, as it sugests, that there is no server name, only port.
I really don't know what to do next. I reinstalled it many times, checked if all services are running. Deployed it with Tomcat or WebLogic 9.2. And always with the same result. When I install everything in only one machine, than it is working fine.
Thanks for any help or suggestion.

Just out of interest why have you used OAS as it is pretty much dead product now and is not used in future releases.
Anyway I am not sure why you have closed ports between those servers, you will end up spending a lot of time trying to open all the required ports between the servers.
Can you not get all the ports open for a time just to check it definitely is a ports issue.
It is probably also worth checking the following spreadsheet out - http://www.oracle.com/technetwork/middleware/bi-foundation/epm-components-communications-fd-11-128629.xls
It highlights the ports used in communication.
Cheers
John
http://john-goodwin.blogspot.com/

Cannot start Oracle BI Scheduler service ---pls help.

Hi all,
I'm new in OBIEE.
I already installed and created some reports and dashboards in OBIEE. I found the problems that they are not updated data when new data loaded into DB.
I tried to start the Oracle BI Scheduler service but it has had the error like the message below;
"The description for Event ID ( 21 ) in Source ( Oracle BI Scheduler ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details.
The following information is part of the event: [68008] Scheduler Error: [nQSError: 67042] The Scheduler Configuration is incorrect.
[nQSError: 67004] Registry value for SchedulerScriptPath not set.."
Could anyone suggest me how would I be able to solve this error ?
Thank you in advance.
NNN

hi
First I do thank you for your answer quickly.
For now, I have tried to follow your suggestion but I found a new error when I start bi scheduler service.
==========================================================================================
The description for Event ID ( 21 ) in Source ( Oracle BI Scheduler ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: [68008] Scheduler Error:
Current Table: S_NQ_JOB.
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed.
Current Table: S_NQ_JOB_PARAM.
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed.
Current Table: S_NQ_INSTANCE.
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed.
Current Table: S_NQ_ERR_MSG.
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed..
===================================================================
Any concern that I should know and how can I hanle this error ?
Thank you

GTS200 - Configuration of SAP Global Trade Services

FYI...
GTS200 schedules are not out yet, they expect to have some in fall 2008.
http://www.sap.com/usa/services/education/usacourse.epx?context=%5b%5b%7cGTS200%7c%7c1%7c072%7cUS%5d%5d%7c
The 1-888-777-1727 number is currently taking details of interested people.

Hi Mohit,
Thank you for replying.
It was not an issue with RFC destination but to do with transfer of outbound delivery processes to SAP global trade services.
As we were not using global trade services, we had to deactivate the transfer of data from SD application to global trade services.
The settings are under IMG>SD>foreging trade>SAP global trade services-plug-in> control data transfer to SAP global trade services
Deactivate all the activities.
Now this issue has been resolved.
Thank you again for replying.
Regards
Veer

Global Scheduled Services Failed in EPPM 8.3

Similar Messages

Maybe you are looking for