Global vriable is not being reflected in the portal

Hi,
I have to hide the element depening upon the value of the variable, the variable is global defined in the interface. My problem is that all the variables values are being reflected back in the form exept the global variable value.
I have assigned the value of the global variable using
Container.DolbyForm.FormData.Details_Subform.txtamount.rawValue = xfa.resolveNode("xfa.record.STATUS").value
Value is being printed when Ima executing the form in the R3 but when the same form is being executed int he portal, the value is not being reflected back.
What can be the possible cause of this behaviour.
Pooja

Hello,
this is a "one was" data copy. You have to bind the layout field with the data element, to have data connection between them.
Only if this connection exists the data you enter into the field will be reflected on the backend.
Best regards,
Dezso

Similar Messages

  • Stoarage location is not being reflected in the outbound delivery

    Hi
    I have a scenario of creating outbound delivery with respect to sales order, But when i am creating outbound delivery vai  tranaction Vl10H , The system creates outbuond delivery but the stoarge location is not being reflected in the outbound delivery  . Since this storage location is WM managed  hence the WM  status shows that the transfer order is not required .
    When i tried to put manually the storage location  the system  throws an error that this storage location in not maintained in plant R001 .
    Althoght the stoack has been there in the stoarage location with resepct to plant ans also  the matrerial master is also been extended for  this storage  laocation and all the respective views such as WM and Sales hasbeen maintianed .
    Could any one guide me what correction is to be done to incorporate the Storage location in Delivery ?
    Thnaks and Regards
    RAJ K

    Hi,
    did you check if there is a storage location determination maintained for the relevant combination of shipping point, plant and
    stor.conditions (table TVKOL)?
    Please also check if the storage location determination is activated for the relevant delivery item type in customizing (transaction 0vlp - field "Determine storage location" (V_TVLP-BELGO)).
    Regards,
    Ely

  • Global exception handler not being called

    Hi,
    I have a wli process that has a global excepton handler. One of the controls throws a NullPointerException but it is not being handled by the group exception handler nor the global exception handler.
    Does anyone have any idea what may be causing this behaviour?
    Thanks,
    Dale

    I have discovered that using -memalign=Ns with N greater than 1 does not work for me. For example, if I remove a VME card from the system and try to use an unsigned short pointer to access a 16-bit register in the card's vacated VME address space, my signal handler gets called when I compile the code with N=1, but for any other N, my handler is ignored and my program cores.
    Unfortunately, using N=1 causes other code that works with higher N to fail. I have one VME card where I need to access a register as a 16-bit read. The code the compiler generates to access the unsigned short pointer value results in two single-byte load instructions - this causes the device to cry foul and as a result, the driver raises SIGBUS, which my program handles. For higher N, the compiler generates one two-byte load instruction, and the device is happy to send back the data.
    So it would appear there is some kind of problem with -xmemalign=Ns for N > 1. It seems like the SIGBUS handler typically imployed by the compiler to handle the misalignment problems when -xmemalign=Ni is used is being invoked.
    Any other ideas?

  • 10.5 portable home sync rules not being respected on the client...

    Portable home syncing is working great for me on my Tiger server and clients, and I'm an old hat at Apple server and OD.... However in my test environment for 10.5, my client machines reuse to respect the rules that I've set in 10.5 Server Workgroup Manager for portable home syncing. I was hoping 10.5.2 would fix this for me, but no luck....
    I can tell that the clients are bound to the OD and are reading the MCX settings from the server, because I can change the sync time interval, and that is being reflected on the client. WGM is set to NOT allow settings to be merged with user's settings, so I can eliminate the client settings as a variable.
    Both Login/Logout and background sync are effected by this problem.
    Is anyone else having this issue?

    Bruce's solution above does indeed work. However, I must have stared at his answer for 20 minutes trying to figure out what he was talking about. Undoubtedly, my inability to initially parse his solution comes from my more basic understanding of OS X Server. Since there are likely others out there with this same Home Sync problem and my same level of experience with OS X Server I wanted to give Bruce's answer again but with more detail.
    The problem, as explained by the original post, is that Home Sync settings for a user or group aren't necessarily respected. For example, if I were to open Workgroup Manager (WGM), select myself as a user (Berylium), click Preferences, select Mobility from the Overview tab, and select the Rules tab I would be in the Home Sync preferences. If I tell the Login & Logout Sync tab to Always do what I select and then I uncheck the Sync at login and logout checkbox one would expect that when I log in or log out I would not see a Home Sync dialog popup and perform a sync operation - but I did.
    The issue as Bruce explains occurs because of another setting I have enabled, Background Sync, and a quirk (bug?) in Leopard Server. I have Background Sync enabled, set to Always, and told to sync in the background my ~/Documents and ~/Desktop folders. Leopard Server, it seems, performs the following operation when I login or logout:
    1. Is Login & Logout Sync enabled? No, ok skip this part.
    2. Is Background Sync enabled? Yes! Ok, sync the background sync items now even though this is a login or log out.
    Clever, Apple. Ok, now that the problem has been explained let's get to the solution.
    1. Open WGM, select your problem user or group, click Preferences, and select the Details tab
    2. Click the +, navigate to /System/Library/CoreServices/, select ManagedClient, and click Add
    - At this point, at least in my installation, several more items appeared in the preference editor list.
    3. Select Home Sync in the preference editor list then click the Edit button (looks like a pencil)
    4. Expand the Always list item
    - Obviously, this is where some people's solution could begin to differ from mine. You may want to edit items in the Once or Often list items.
    5. Click the New Key button, a New Item will be created and selected, click New Item and select Sync Background Set During Login from the list.
    6. Change the Value item for Sync Background Set During Login from automatic to dontSync
    7. Repeat steps 5 and 6 but select Sync Background Set During Logout
    8. Click Apply Now followed by Done
    Now you should be all set. Thank you Bruce for the solution to this problem and I hope someone else finds my more detailed explanation helpful.
    -Berylium

  • Ipod not being recognized on the system, not getting reset,retry,restore,..

    hi all
    my ipod is not being recognized on the system..
    i dont know wat is the problem
    i tried the 5 Rs thing and i didn't get any king of result..
    i dont know wat to do
    please someone who could find a solution for this please reply and send me the solutions
    thanks..
    bye.

    See this...
    Windows Does Not Recognize iPod
    btabz

  • Product hierarchy  is not being maintained in the sales order material

    Hi,
    I have an issue where the product hier is not being maintained in the sales order for some of the materials although the material master has the prod hier maintained.. The main program is SAPMV45A and I have checked all the exits in MV45AFZZ. In none of these exits the PRODH field in XVBAP is being populated. I would like top know if anyone has faced a problem like this.
    cheers
    Aveek

    Hi,
    Thanks for your suggestion. The poduct hierarchy is maintained in the material master but not being picked up at the time of creating the sales order. I have found the solution and coding has to be done in the MV45AFZZ.
    cheers
    Aveek

  • Fieldname in not being displayed in the table maintenance

    Hi Experts,
                     I have created a table maintenance for a custom table.The table contains 10 fields out of which first 3 are key fields.
    on the 3rd key field i have supplied F4 help so as to populate the 4th field automatically based on the selection of 3rd field.
    everything is working fine but last 6 'fieldname' is not being displayed on the column bar.instead of fieldname there is '+' sign on the column. And i have checked in layout(screen) also only first four fields being displayed.
    plz help.
    Thanks n Regards,
    Mukesh

    Hello Mukesh,
    As you know, data element or pre-defined data type will be assigned as field type to the fields in a table. If you are assigning the data element, then the data element has the option to give the field label.
    If you are assigning the data element and the field label is empty, then + sign will come. In other case -  if you assigning the pre-defined data type also, the screeen column header will be shown as + sign.
    In both the above cases, you can change the column header manually in the layout.
    Regards,
    Selva K.

  • All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

    All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
    With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

    Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
    Here's a link to the product feedback page: http://www.apple.com/feedback/
    I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
    I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
    Cheers!

  • Date not being displayed in the custom format

    Hi ,
      I have a problem wherein i am unable to change the format of the date.
    I need the date to be in the format 'January 10,2010.' however the date is being displayed as '1/10/10'. I have tried all options for the date formatting. I specified the custom format as 'MMMM D,YYYY' as mentioned in the SAP Library. I am trying to use the std custom options like YYYY-MM-DD, the date is not being dispalyed in the custom format provided by SAP either.
    I have binded date from the context, used the Current Date field provided by SAP.  Nothing works.
    Its not working on the new form. However the old forms have the same kind of formatting and are being displayed as desired.
    Please suggest as to what the issue could be.
    Thanks,
    Soumya.

    Hi All,
    Even I'm encountering the same issue. I'm trying to control the outputted date format programmatically.Please have a look.
    data: v_int_date like sy-datum,
            v_ext_date(10).
    v_int_date = '20110201'
    write v_int_date to v_ext_date MM/DD/YYYY.
    Here I've tried to convert the date to external format using a fixed format(MM/DD/YYYY). But still it's getting outputted in the format DD/MM/YYYY only as that's the way its defined in the User Master!
    Is there any solution for this? How can I 'override' defaults in the SAP User Master?
    Thanks,
    Mahesh

  • My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

  • Materialized view not being used in the report

    I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!

    The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
    You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
    Regards
    Abhinav Agarwal
    Oracle Business Intelligence Product Management
    http://www.oracle.com/bi
    http://www.oracle.com/technology/documentation/bi_ee.html
    http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
    http://oraclebi.blogspot.com/

  • Where clause is not being passed to the report

    I just upgraded my crystal reports from 10.0 to 11 R2. Reports were working fine in 10.0 version,
    Reports are called from vb.net (vissual studio 2005). When I was running this reports using crystal 10.0 and visual studio 2005, it was working fine, After the upgrade report runs but I am noticing that where clause is not being passed to the reports.It generates report as there is no where clause and produces multiple pages report.

    I believe you are encountering an issue documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
    Ludek

  • My ipad is not being recognized by the new iTunes update that just came  out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini about a month ago

    My ipad mini is not being recognized by the new iTunes update that just came  out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini

    I found this is another thread - same issue.
    Re: iTunes has stopped working. Why? 
    Sep 11, 2013 6:07 AM (in response to thurdy)
    Resolved!
    After contacting Apple, I received a reply from their engineers:
    Copy QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    to: C:\Program Files (x86)\iTunes
    And that did the trick.
    Message was edited by: Stryder777

  • I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

    I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

    Hey Stan1958,
    Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Thanks,
    Matt M.

  • After updating ios my ipad is stuck in recovery mode and is not being recognised by the computer in windows or itunes.  Help!

    Help - I am stuck in Afghanistan on operations and my iPad mini has died.
    I tried to update the IOS as directed, there were a few error messages and I cancelled the process.
    The ipad now only shows the connect to itunes screen and is not being recognised by the computer in either windows or itunes.
    I have tried several resets and restarted the computer and reinstalled itunes.
    Is there anything else I can do.
    This is my only method of talking back to my family at the moment and is really quite important.
    JS

    Thanks, I will give it a go. Will it work on my computer after I do that?
    Jez

Maybe you are looking for