Where clause is not being passed to the report

I just upgraded my crystal reports from 10.0 to 11 R2. Reports were working fine in 10.0 version,
Reports are called from vb.net (vissual studio 2005). When I was running this reports using crystal 10.0 and visual studio 2005, it was working fine, After the upgrade report runs but I am noticing that where clause is not being passed to the reports.It generates report as there is no where clause and produces multiple pages report.

I believe you are encountering an issue documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Ludek

Similar Messages

Materialized view not being used in the report

I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!

The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
Regards
Abhinav Agarwal
Oracle Business Intelligence Product Management
http://www.oracle.com/bi
http://www.oracle.com/technology/documentation/bi_ee.html
http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
http://oraclebi.blogspot.com/

Udf Data is not being displayed in the report

Hi all,
i have designed one report in which i am displaying some udf fields along with other system fields.
i have not used any selection criteria.
when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
If i open sales order and press 'Shift-F2' and update the document and now if i run report then i get that udf value in the report.
why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
pls suggest some solution.
regsrds,
Chetan.

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Plan values not being displayed in the report ..

Hi All,
I have a query on query.. .
which displays actual and plan values , but the report is not showing the plan values
tell me how to do this
Sruthi

Sruthi,
Basically how do you store the data in the transaction cube's ?
How does the data differs b/w Plan and actual for the same KF ?
It stores depending on the Version...
Restrict the KF to a perticular version ...
Then you can get the desired...
Check the LISTCUBE with different versions..
Cheer's
HVR.

Query in the where clause is not allowed

Hi all,
I have a table m_vehicle that stores 1 or more than 1 rows of data for each person. But the partner's schema requires that 0 or 1 vehicle license plate data be sent with the xml file. I have the following nested select statement inside a bigger one and it does not work,
select xmlelement("VehicleLicensePlate",
     (case when mv.lic_plate_state is not null then
          xmlelement("PlateState", mv.lic_plate_state)
     end), -- end of plate state
     (case when mv.lic_plate_no is not null then
          xmlelement("PlateNumber", xmlelement("ID", mv.lic_plate_no))
     end),
     (case when mv.lic_plate_year is not null then
          xmlelement("PlateExpiryYear", mv.lic_plate_year)
     end)
     ).extract('/*')
from m_vehicle mv where mv.mni_id = 1083650
and mv.seq_no = (select max(mv2.seq_no) from m_vehicle mv2
where mv2.mni_id = mv.mni_id) and mv.lic_plate_no is not null
But it works when I run it alone and gets the latest row for the person. It does not work either if I join this table with other tables. My root element select is from dual because I have to supply lots of SOAP and other artifacts in the xml. Is it because I have this root select from dual that the query in the where clause does not work? How do I make it work so that I get 0 or one row only from the table? My solution was to write a function that returns each part of the license plate data using dymanic sql and call it in the xmlelement function. It works but I would like to use plain sql instead.
Thanks.
Ben

By the way, the error I get is this,
ERROR:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00216: invalid character 3 (0x3)
Error at line 1
ORA-06512: at "SYS.XMLTYPE", line 111
Ben

I have just started with Logic X, having been a Logic 8 user for many years. I have some expensive plug-ins which are not being recognised by the news Logic. Where should I install them ? YoursdisillusionedbyLogic

I have some expensive plug-ins which are not being recognised by the new Logic. Where should I install them ?
I am using Mavericks OS, and I am considering transfering my choiceof DAW to Protools.
YoursdisillusionedbyLogic

Hi
LPX only supports 64bit Audio Unit plugins. You probably need to get the latest updates for all of your plugs.
Some plugs are not currently available as 64bit versions: you may want to try
http://www.soundradix.com/products/32-lives
CCT

Product hierarchy is not being maintained in the sales order material

Hi,
I have an issue where the product hier is not being maintained in the sales order for some of the materials although the material master has the prod hier maintained.. The main program is SAPMV45A and I have checked all the exits in MV45AFZZ. In none of these exits the PRODH field in XVBAP is being populated. I would like top know if anyone has faced a problem like this.
cheers
Aveek

Hi,
Thanks for your suggestion. The poduct hierarchy is maintained in the material master but not being picked up at the time of creating the sales order. I have found the solution and coding has to be done in the MV45AFZZ.
cheers
Aveek

Dashboard prompt value is not passing into the report

Hi,
I am using OBIEE 10g. The problem is in Oracle BI Answers
I have a prompt and its related report. In the prompt, in one of the column, I am using sql result. The sql query is a co-related sub query where i have used 2 tables. employee_data and employee_region. The reason for using sub-query is that there is no data_center column in the employee_data table. It has the records for all the data_center e.g USA, UK,IND,AUSTRALIA etc So, I used the sub query with condition which will give the result on a particular data center (here it is USA) and this sub query's output is input for the main query. And the prompts works fine and gives correct result
The sql query used for the column in the prompt (in Oracle BI Answers) as
SELECT EMPLOYEE_DATA.ENAME FROM EMPLOYEE WHERE EMPLOYEE_DATA.ENAME IN (SELECT EMPLOYEE_REGION.ENAME FROM EMPLOYEE WHERE EMPLOYEE_REGION.DATA_CENTER = 'USA')Now in the report, there are 2 coulmns. - EMPLOYEE_DATA.ENAME and EMPLOYEE_REGION.DATA_CENTER
I have used the main column EMPLOYEE_DATA.ENAME for filter as 'prompted'.
The problem is the value from the prompt is not passing from the prompt to the report, what I found. Because, instead of showing the result for 'USA' data_center, It also shows other data_center 's (UK,IND,AUSTRALIA) data.
How filter condition I should use for EMPLOYEE_DATA.ENAME column in the report so that the prompt value will pass to the report properly ?
Thanks
Edited by: Kuldip on Feb 21, 2013 6:17 AM

Hi Kuldip,
There are 2 ways of doing it.
1. Nice and good: For the section where the report is put have a condition to display only if it returns rows. For details please refer to :
http://bischool.wordpress.com/category/guided-navigation/
2. The easy way: Add a "No Result" view to your report and add few spaces in the text.
Let me know if this helped.
Regards,
Jay

My notes are not being passed from one device to another

My notes are not being passed from my ipad to my ipad mini.

There can be several different accounts in the notes app if you have email account that allow you to sync notes. I do not use iCloud email, but I have two IMAP email accounts that sync notes. I wanted to know if you were selecting the correct account on the Mini.
When you launch the Notes app, you can tap The Account button in the upper left corner in order to switch between accounts. If you do not have another Notes account, try turning Notes off on the Mini in Settings>iCloud>Notes>Off. Restart your iPad, go back in and turn Notes on again.

I am not being able to create my apple ID as my card details are not being accepted by the app store. i tried with my visa card as well as master card. help me out to solve the problem..

I am not being able to create my apple ID as my card details are not being accepted by the app store. i tried with my visa card as well as master card. help me out to solve the problem..

Were the VISA and MasterCard issued to you by a bank in the country where you reside and do they have a verifiable billing address in the same country?
Or are these debit cards that you bought in a local store. Apple does not accept debit cards that you bought.

Ipod not being recognized on the system, not getting reset,retry,restore,..

hi all
my ipod is not being recognized on the system..
i dont know wat is the problem
i tried the 5 Rs thing and i didn't get any king of result..
i dont know wat to do
please someone who could find a solution for this please reply and send me the solutions
thanks..
bye.

See this...
Windows Does Not Recognize iPod
btabz

Stoarage location is not being reflected in the outbound delivery

Hi
I have a scenario of creating outbound delivery with respect to sales order, But when i am creating outbound delivery vai tranaction Vl10H , The system creates outbuond delivery but the stoarge location is not being reflected in the outbound delivery . Since this storage location is WM managed hence the WM status shows that the transfer order is not required .
When i tried to put manually the storage location the system throws an error that this storage location in not maintained in plant R001 .
Althoght the stoack has been there in the stoarage location with resepct to plant ans also the matrerial master is also been extended for this storage laocation and all the respective views such as WM and Sales hasbeen maintianed .
Could any one guide me what correction is to be done to incorporate the Storage location in Delivery ?
Thnaks and Regards
RAJ K

Hi,
did you check if there is a storage location determination maintained for the relevant combination of shipping point, plant and
stor.conditions (table TVKOL)?
Please also check if the storage location determination is activated for the relevant delivery item type in customizing (transaction 0vlp - field "Determine storage location" (V_TVLP-BELGO)).
Regards,
Ely

Fieldname in not being displayed in the table maintenance

Hi Experts,
I have created a table maintenance for a custom table.The table contains 10 fields out of which first 3 are key fields.
on the 3rd key field i have supplied F4 help so as to populate the 4th field automatically based on the selection of 3rd field.
everything is working fine but last 6 'fieldname' is not being displayed on the column bar.instead of fieldname there is '+' sign on the column. And i have checked in layout(screen) also only first four fields being displayed.
plz help.
Thanks n Regards,
Mukesh

Hello Mukesh,
As you know, data element or pre-defined data type will be assigned as field type to the fields in a table. If you are assigning the data element, then the data element has the option to give the field label.
If you are assigning the data element and the field label is empty, then + sign will come. In other case - if you assigning the pre-defined data type also, the screeen column header will be shown as + sign.
In both the above cases, you can change the column header manually in the layout.
Regards,
Selva K.

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
Here's a link to the product feedback page: http://www.apple.com/feedback/
I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
Cheers!

Date not being displayed in the custom format

Hi ,
I have a problem wherein i am unable to change the format of the date.
I need the date to be in the format 'January 10,2010.' however the date is being displayed as '1/10/10'. I have tried all options for the date formatting. I specified the custom format as 'MMMM D,YYYY' as mentioned in the SAP Library. I am trying to use the std custom options like YYYY-MM-DD, the date is not being dispalyed in the custom format provided by SAP either.
I have binded date from the context, used the Current Date field provided by SAP. Nothing works.
Its not working on the new form. However the old forms have the same kind of formatting and are being displayed as desired.
Please suggest as to what the issue could be.
Thanks,
Soumya.

Hi All,
Even I'm encountering the same issue. I'm trying to control the outputted date format programmatically.Please have a look.
data: v_int_date like sy-datum,
v_ext_date(10).
v_int_date = '20110201'
write v_int_date to v_ext_date MM/DD/YYYY.
Here I've tried to convert the date to external format using a fixed format(MM/DD/YYYY). But still it's getting outputted in the format DD/MM/YYYY only as that's the way its defined in the User Master!
Is there any solution for this? How can I 'override' defaults in the SAP User Master?
Thanks,
Mahesh

Where clause is not being passed to the report

Similar Messages

Maybe you are looking for