Globale variable to exchange value between two planning function (Formel)
Hi,
can I define a globale variable to exchange the value between two planning function?
any anwser will be very appreciated.
hongwei
Hi,
can I define a globale variable to exchange the value between two planning function?
any anwser will be very appreciated.
hongwei
Similar Messages
-
In BADi , How to pass the values between two Method
Hi Experts,
We have two methods in BADis. How to pass the value between two Methods. Can you guys explain me out with one example...
Thanks & Regards,
Sivakumar SHi Sivakumar!
Create a function group.
Define global data (there is a similiar menu point to jump to the top include).
Create one or two function modules, with which you can read and write the global data.
In your BADI methods you can access the global data with help of your function modules. It will stay in memory through the whole transaction.
Regards,
Christian -
How to pass value between two forms.
Hi all,
how to pass value between two forms(using :parameter),...
Thanks
RajeshTo use parameters, create a parameterlist with the named parameters
DECLARE
pl_id PARAMLIST;
pl_name VARCHAR2(10) := 'tempdata';
BEGIN
pl_id := Get_Parameter_List(pl_name);
IF not Id_Null(pl_id) THEN
DESTROY_PARAMETER_LIST(pl_id);
END IF;
pl_id := Create_Parameter_List(pl_name);
ADD_PARAMETER (pl_id,'MYPARAMETER',TEXT_PARAMETER,:BLOCK.VALUE);
CALL_FORM('MYNEWFORM', NO_HIDE, DO_REPLACE, NO_QUERY_ONLY, pl_id);
END;In the new form you can then just access the parameters via :PARAMETER.MYPARAMETER;
An alternative is the usage of globals:
:GLOBAL.MYPARAM:=:BLOCK.VALUE;
-- call the emp-form
CALL_FORM('MYNEWFORM', NO_HIDE, DO_REPLACE);and in the new form use:
DEFAULT_VALUE(NULL, 'GLOBAL.MYPARAM');
IF :GLOBAL.MYPARAM IS NOT NULL THEN
...The advantage of gloabls is that they can also return values back to the calling form, which is not possible using parameters -
EXCHANGE SUBPARTITION between two Partitioned tables
DB Version: 10.2.0.5
We have :
Table A(Range-List Partitioned):
Partition A1 -> Sub-Partition S1A1 and S2A1
Partition A2 -> Sub-Partition S1A2 and S2A2
Table B(Range-List Partitioned):
Partition B1 -> Sub-Partition S1B1 and S2B1
Partition B2 -> Sub-Partition S1B2 and S2B2
I would like to EXCHANGE SUBPARITION A.S1A1 with B.S1B1, and S2A1 with S2B1 and S1A2 with S1B2 ...so on. Which means, how do I exchange subpartitions between two similar tables?
The following statement does not work...
ALTER TABLE A EXCHANGE SUBPARTITION S1A1
WITH TABLE B SUBPARTITION S1B1 INCLUDING INDEXES;
Please advice.Hi,
ALTER TABLE A EXCHANGE SUBPARTITION S1A1 WITH TABLE B INCLUDING INDEXES;
Read the document
http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10739/partiti.htm
Regards
Hitgon -
Problem exchanging values between a Servlet and Thread???
Hi Everybody,
I have got a problem exchanging values between a Servlet and a Thread...
The actual thing will go like this
I take a request from JSP which is served by a servlet..
A thread is invoked in the servlets into which the parameter values taken from JSP page is sent...
In between the thread needs to be suspended for a moment, relieve the control back to the servlet and then come back with the new values modified in the servlet...
How is this achieved?
Please give ur suggestions regarding this...
Thanks in advanceI really have no clue how you can use URLConnection to do that!
Could you please explain in the following scenario how it can help me as an alternative solution to the following:
Non-Servlet A continously running & saving to some prop regularly
--> servlet B reads prop file regularly --> display continously on a jsp file
I wish I could do a servlet A --> servlet B-- > display jsp scenario but I do not know how to have servlet A continously running while keep the servlet B interacting with the jsp. -
Awk - printing a value between two matching regex [SOLVED]
I'm trying to write a script to parse a single line output, but to then only display the value between two matching regex.
I have got it to only display the value between the matching regex, but then it carries on and displays the rest of the line. How do I tell it to stop once the matching value has been printed?
ARTIST=`awk '/Artist/,/Artist/ {gsub(/Artist/, Artist); print}' /home/sapphire/.foobar2000/track_info`
This produces 'Akira Yamaoka Title She Title Album Silent Hill 1 OST Album CurrentTime 0:03 CurrentTime TotalTime 2:01 TotalTime' rather then the desired 'Akira Yamaoka'.
So I guess I'm asking how one would go about terminating the above awk command? Thanks - I know, it'll be something simple - but I'm not experienced with scripting
Last edited by wyvern (2008-04-10 11:37:30)ibendiben wrote:Could you share the file you are extracting the data from?
No problem, and thank you for the help so far
This is what's written each time I update my playing track, no more, no less:
Artist Akira Yamaoka Artist Title Silent Hill Title Album Silent Hill 1 OST Album CurrentTime 0:04 CurrentTime TotalTime 2:51 TotalTime
Single line only, as the plugin won't break up the text into anything more than the one line -
How to share/exchange songs between two iPods?
Hi,
I would like to know of a way(s) to share/exchange songs between two iPods (synced to two separate computers).
Thanks,
ApuApu,
It's possible to share between two computers but not two iPods, change the settings for the pod to manual > Edit > Preferences > iPod. -
Global variables to share data between separate programs.
Hi guys and gals,
On the advice of a lv consultant, we've used an array of global
variables to share data (about 100 variables) between an acquisition/control
program and a consumer program (datalogging) running on the same PC. This
worked fine in the development environment. However it no longer works when
the two programs are compiled. Is there a trick to get this to work or do
we have to use datasockets or DDE to move the data.
In case you're wondering the idea of two separate programs is to
separate the critical control and data acquisition functions from the less
critical but more likely to error datalogging functions.
Regards,
Alf Katz,
[email protected]There are several solutions:
1.) Use VI Server available in LabVIEW 5.1 and Up to provide a communication
path between the two executables.
2.) Use a data file to transfer the data between the two executables.
3.) Use a TCP/IP connection there are several examples included with LabVIEW
showing the mechanics of this.
The simplest method is Number 1. Using the VI server, you open the
connection and then retrieve the data form the Global VI based on the
Parameter Name. It is very fast and requires very little processor
overhead. Make a driver to Open the connection then a Read to get the data.
Do not open and close the connection everytime, there is a lot of overhead
in the Open connection call.
Make sure you configure the VI Server within the development environmen
t.
Also you must include a few statements in the Executables INI file to
correctly enable the VI server capabilities.
Regards,
Jeff Meyer
Consultant
Focused Energy
Suffield, CT USA
"Alf Katz" wrote in message
news:[email protected]..
> Hi guys and gals,
> On the advice of a lv consultant, we've used an array of global
> variables to share data (about 100 variables) between an
acquisition/control
> program and a consumer program (datalogging) running on the same PC. This
> worked fine in the development environment. However it no longer works
when
> the two programs are compiled. Is there a trick to get this to work or do
> we have to use datasockets or DDE to move the data.
>
> In case you're wondering the idea of two separate programs is to
> separate the critical control and data acquisition functions from the less
> critical but more likely to error datalogging functions.
>
>
> --
> Regards,
> Alf Katz,
> [email protected]
org
>
>
> -
How Do I Pass A Value Between two Spry Tabs?
I am using the Adobe Spry framework to develop an webpage
with 3 tabs. I want to be able to pass a value between tabs.
More specifically...
In Tab1, the user will click on a link that declares a
variable called "groupID" with a value of "999"
Tab 2 Should then open up and have "groupID" available for
use. It will be used as a hidden form field.I think I get what your talking about.
Thing to remember is that all the data is loaded on the same
page still so you can just pass it over like you would using JS.
I did a little example let me know if this is what you are
looking for.
You will see that I added a function at the bottom that will
tell spry what panal to open as well as pass your "groupID" the
function is call on the onclick even.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
<script language="JavaScript" type="text/javascript"
src="js/SpryTabbedPanels.js"></script>
<style>
.TabbedPanels {
clear:none;
float:left;
width:100%;
padding-top: 0px;
padding-right: 0px;
padding-bottom: 0px;
padding-left: 0px;
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
margin-left: 0px;
.TabbedPanelsTabGroup {
margin:0px;
padding:0px;
.TabbedPanelsTab {
-moz-user-select:none;
cursor:pointer;
float:left;
font-family:Verdana, Arial, Helvetica, sans-serif;
font-size:11pt;
font-size-adjust:none;
font-stretch:normal;
font-style:normal;
font-variant:normal;
font-weight:normal;
line-height:normal;
list-style-image:none;
list-style-position:outside;
list-style-type:none;
position:relative;
top:0px;
background-color:#FFEEEE;
height: 25px;
width: 161px;
margin-top: 2px;
margin-right: 15px;
margin-bottom: -2px;
margin-left: 0px;
padding-top: 8px;
padding-right: 10px;
padding-bottom: 4px;
padding-left: 10px;
color: #ebe3cb;
background-repeat: no-repeat;
vertical-align: bottom;
text-align: center;
.TabbedPanelsTabHover {
.TabbedPanelsTabSelected {
background-color:#EEEEEE;
height: 25px;
margin-top: 2px;
margin-right: 15px;
margin-bottom: -2px;
margin-left: 0px;
padding-top: 2px;
padding-right: 10px;
padding-bottom: 9px;
color: #46483c;
.TabbedPanelsTab a {
color:black;
text-decoration:none;
.TabbedPanelsContentGroup {
background-color:#EEEEEE;
clear:both;
.TabbedPanelsContent {
padding:4px;
border: 1px solid #000000;
text-align: left;
background-color: #FFFFFF;
.TabbedPanelsContentVisible {
.VTabbedPanels .TabbedPanelsTabGroup {
background-color:#EEEEEE;
border-color:#999999 rgb(153, 153, 153) rgb(204, 204, 204)
rgb(204, 204, 204);
border-style:solid;
border-width:1px;
float:left;
height:20em;
position:relative;
width:10em;
.VTabbedPanels .TabbedPanelsTab {
border-left:medium none;
border-right:medium none;
border-top:medium none;
float:none;
margin:0px;
.VTabbedPanels .TabbedPanelsTabSelected {
background-color:#EEEEEE;
border-bottom:1px solid #999999;
.VTabbedPanels .TabbedPanelsContentGroup {
clear:none;
float:left;
height:20em;
padding:0px;
width:30em;
</style>
</head>
<body>
<div class="TabbedPanels" id="tp1">
<ul class="TabbedPanelsTabGroup">
<li class="TabbedPanelsTab" tabindex="0"
>Tab1</li>
<li class="TabbedPanelsTab" tabindex="0"
>Tab2</li>
<li class="TabbedPanelsTab"
tabindex="0">Tab3</li>
<li class="TabbedPanelsTab"
tabindex="0">Tab4</li>
</ul>
<div class="TabbedPanelsContentGroup">
<!---We include the 4 tabs--->
<div class="TabbedPanelsContent" >
tab1
</div>
<div class="TabbedPanelsContent1" >
<a href="#" onclick="tabtest(3,999);">test</a>
</div>
<div class="TabbedPanelsContent" >
</div>
<div class="TabbedPanelsContent" >
<form name="myform">
This number was passed from tab 1 <input name="mystuff"
/></form>
</form>
</div>
</div>
</div>
</body>
</html>
<!---we add this so the tabs will work--->
<script language="JavaScript" type="text/javascript">
var tp1 = new Spry.Widget.TabbedPanels("tp1", { defaultTab: 0
function tabtest(tab,groupID)
var tp1 = new Spry.Widget.TabbedPanels("tp1", { defaultTab:
tab });
document.myform.mystuff.value = groupID ;
</script> -
Better approach for checking column values between two different rows
My requirement is to find best Approach to find difference between column values of two different rows.Below I've mentioned two different
approaches I'm thinking of,but I'd like to know is there any other better approach.
version details
SQL> SELECT *
2 FROM V$VERSION;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Solaris: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - ProductionTable creation script
CREATE TABLE R_DUMMY
(CA_ID VARCHAR2(16) NOT NULL ENABLE,
CA_VER_NUM NUMBER(4,2) NOT NULL ENABLE,
BRWR_SHORT_NAME VARCHAR2(25 CHAR),
sic_code number,
FAC_ID VARCHAR2(10) NOT NULL ENABLE
/ insert script
insert into r_dummy (CA_ID, CA_VER_NUM, BRWR_SHORT_NAME, sic_code, FAC_ID)
values ('CA2001/11/0002', 2.00, 'Nandu',1234, 'FA000008');
insert into r_dummy (CA_ID, CA_VER_NUM, BRWR_SHORT_NAME, sic_code, FAC_ID)
values ('CA2001/11/0002', 3.00, 'SHIJU',456, 'FA000008');Desired O/P :
ca_id fac_id column_name previous name after_modification
CA2001/11/0002 FA000008 BRWR_SHORT_NAME Nandu SHIJU
CA2001/11/0002 FA000008 sic_code 1234 456My approach
select ca_id,fac_id,column_name,
decode(column_name,'BRWR_SHORT_NAME',lg_brwr,lg_sic) previous_name ,
decode(column_name,'BRWR_SHORT_NAME',ld_brwr,ld_sic) after_modification
from
select
case
when ld_brwr != lg_brwr then
'BRWR_SHORT_NAME'
when ld_brwr != lg_brwr then
'sic_code'
end
) column_name,ca_id,fac_id,lg_brwr,ld_brwr,ld_sic,lg_sic
from (
select ca_id,fac_id,lag_brwr,ld_brwr,ld_sic,lag_sic
from
Select lead(brwr_short_name,1) over(partition by ca_id,fac_id) ld_brwr,
lag(brwr_short_name,1) over(partition by ca_id,fac_id) lg_brwr,
lead(sic_code,1) over(partition by ca_id,fac_id) ld_sic,
lag(sic_code,1) over(partition by ca_id,fac_id) lg_sic,
ca_id,fac_id
from r_dummy
where (ld_brwr != lg_brwr or ld_sic != lg_sic)
)2nd Approach :
=============
select ca_id,fac_id,column_name,
decode(column_name,'BRWR_SHORT_NAME',lg_brwr,lg_sic) previous_name ,
decode(column_name,'BRWR_SHORT_NAME',ld_brwr,ld_sic) after_modification
from
select
case
when ld_brwr != lg_brwr then
'BRWR_SHORT_NAME'
when ld_brwr != lg_brwr then
'sic_code'
end
) column_name,ca_id,fac_id,lg_brwr,ld_brwr,ld_sic,lg_sic
from (
select ca_id,fac_id,brwr_short_name,sic_code
from
Select ca_id,fac_id,brwr_short_name lg_brwr,sic_code lg_sic
from r_dummy
where ca_ver_num = '2.00'
)o,(
Select ca_id,fac_id,brwr_short_name ld_brwr,sic_code ld_sic
from r_dummy
where ca_ver_num = '3.00'
)n
where 0.ca_id = n.ca_id
and 0.fac_id = n.fac_id
and (ld_brwr != lg_brwr or ld_sic != lg_sic)
)Hi Experts,
I've provided sample data where I'm checking for just two columns viz brwr_short_name ,sic_code,but in real time
I've to check for 8 more columns so please suggest me with a better approach.
I appreciate your precious suggestions.Hi,
Thanks for posting the CREATE TABLE and INSERT statements; that really helps!
Here's one wa. Like your 2nd approach, this uses a self-join:
WITH got_r_num AS
SELECT ca_id
, ROW_NUMBER () OVER ( PARTITION BY ca_id
, fac_id
ORDER BY ca_ver_num
) AS r_num
, brwr_short_name
, TO_CHAR (sic_code) AS sic_code
, fac_id
-- , ... -- Other columns (using TO_CHAR if needed)
FROM r_dummy
, unpivoted_data AS
SELECT *
FROM got_r_num
UNPIVOT INCLUDE NULLS
( txt
FOR column_name IN ( brwr_short_name AS 'BRWR_SHORT_NAME'
, sic_code AS 'SIC_CODE'
-- , ... -- Other columns
SELECT p.ca_id
, p.fac_id
, p.column_name
, p.txt AS previous_name
, a.txt AS after_modification
FROM unpivoted_data p
JOIN unpivoted_data a ON p.ca_id = a.ca_id
AND p.fac_id = a.fac_id
AND p.column_name = a.column_name
AND p.r_num = a.r_num - 1
AND p.txt || 'X' != a.txt || 'X'
ORDER BY a.r_num
;To include other columns, add them in the 2 places where I put the comment "Other columns".
Ca_ver_num can have any values, not just 2.00 and 3.00.
This will show cases where a value in one of the columns changed to NULL, or where NULL changed to a value.
There ought to be a way to do this without a separate sub-query like got_r_num. According to the SQL Language manual, you can put expressions in the UPIVOT ... IN list, but when I tried
... UNPIVOT INCLUDE NULLS
( txt
FOR column_name IN ( brwr_short_name AS 'BRWR_SHORT_NAME'
, TO_CHAR (sic_code) AS 'SIC_CODE'
)I got the error "ORA_00917: missing comma" right after TO_CHAR. Perhaps someone else can show how to eliminate one of the sub-queries. -
Replacing one column value between two rows..help??
HI,
I have table T
it has five columns, all are in number data type
Col1 and col2 are jointly primary key i.e. they cannot be repeated combined
when i run this query..
SQL> Select * from t
it shows me the data like this
Col1 Col2 Col3 Col4 Col5
1 1 78 58 12.76
2 1 128 446 32.10
3 1 468 566 52.10
4 1 878 58 52.05
5 1 987 348 22.02
... so on.
my requirement is that i want to update this table by replacing the col1 value between any two rows
suppose this is the first row
Col1 Col2 Col3 Col4 Col5
1 1 78 58 12.76
and this is any 2nd row
Col1 Col2 Col3 Col4 Col5
5 1 987 348 22.02
now i want that for first row the value of col1 replaces the value of col1 of 2nd row
and for 2nd row the value of col1 replaces the value of col1 of 1st row
i.e.
Col1 Col2 Col3 Col4 Col5
5 1 78 58 12.76
Col1 Col2 Col3 Col4 Col5
1 1 987 348 22.02
please tell how to achieve this in single query/procedureregards,
RamisSQL> create table t (id1 number, id2 number, name varchar2(1));
Table created.
SQL> alter table t add primary key (id1,id2);
Table altered.
SQL> insert into t values(1,1,'A');
1 row created.
SQL> insert into t values(5,1,'B');
1 row created.
SQL> commit;
Commit complete.
SQL> select * from t;
ID1 ID2 N
1 1 A
5 1 B
SQL> var val1 number
SQL> var val2 number
SQL> exec :val1 := 1;
PL/SQL procedure successfully completed.
SQL> exec :val2 := 5;
PL/SQL procedure successfully completed.
SQL> update t set id1 = (:val1 + :val2) - id1 where id1 in (:val1,:val2);
2 rows updated.
SQL> select * from t;
ID1 ID2 N
5 1 A
1 1 B
SQL> rollback;
Rollback complete.
SQL> select * from t;
ID1 ID2 N
1 1 A
5 1 B
SQL> commit;
Commit complete.
SQL> update t set id1 = decode(id1,:val1,:val2,:val1)
2 where id1 in (:val1, :val2);
2 rows updated.
SQL> select * from t;
ID1 ID2 N
5 1 A
1 1 BRgds. -
How exchange messages between two user-bean instances?
Hi,
I would like to let several user to log-in my web site (I'm using tomcat) and then let them exchange some messages until they are logged-in. Is there a way using JSF?
I was thinking about implementing a list of messages inside each user-bean. The user should know that other users are logged-in, that could be listed in a table, and click on its name. I would like that the click action create an item in the list valiable of the selected user. Is that possible using JSF? I didn't find any of such kind of communication between two user-bean instances.
Do you have any hints? Is that the right way or is there other possibilities?
ThanksYou could get hold of a map of sessions in the application scope. Make use of HttpSessionListener to add/remove sessions to/from the map.
JSF is just another component based MVC framework on top of JSP/Servlet. Everything which you can do in JSP/Servlet is just still possible. You only need to understand how JSF works under the hood. -
How to get values between two years??
select distinct a.band_no_daftar, a.episod, a.band_nama1, a.penjara,
to_char(b.trkh_semak_layak,'yyyy') as tahun,
c.penj_lokasi
from banduan a, prl_semak_layak b, penjara c
where a.band_no_daftar = b.no_daftar(+)
and a.episod = b.episod(+)
and a.penjara = c.penjara_id
and b.status_layak = 1
and b.trkh_semak_layak between trunc(to_date(:dari,'yyyy')) and to_date(:hingga,'yyyy')
group by c.penj_lokasi, a.band_no_daftar, a.episod, a.band_nama1, a.penjara,
to_char(b.trkh_semak_layak,'yyyy')
order by a.penjarahow i'm going to retrieve records between two years??for example from year 2011 to 2012.CREATE TABLE PRL_SEMAK_LAYAK
NO_DAFTAR VARCHAR2(10 BYTE) NOT NULL,
EPISOD NUMBER(2) NOT NULL,
TL_HUK NUMBER(1),
TL_KLAS NUMBER(1),
TL_JAD4 NUMBER(1),
TL_KESLAIN NUMBER(1),
TL_LP NUMBER(1),
TL_RAY NUMBER(1),
TL_PPI NUMBER(1),
STATUS_LAYAK NUMBER(1),
TRKH_LAYAK_PAROL DATE,
KOD_PEJABAT_PAROL VARCHAR2(10 BYTE),
TRKH_MULA_PRL DATE,
TRKH_TAMAT_PRL DATE,
TEMPOH_T NUMBER(4),
TEMPOH_B NUMBER(4),
TEMPOH_H NUMBER(4),
KLASIFIKASI_PRL NUMBER(1),
TL_ROTAN NUMBER(1),
PECAHAN_KESALAHAN VARCHAR2(3 BYTE),
TERIMA_DOSIR NUMBER(1),
TRKH_DOSIR DATE,
TRKH_SEMAK_LAYAK DATE
Insert into prl_semak layak
(NO_DAFTAR, EPISOD, TL_HUK, TL_KLAS, TL_JAD4, TL_KESLAIN, TL_LP, TL_RAY, TL_PPI, STATUS_LAYAK, TRKH_LAYAK_PAROL, TL_ROTAN, TRKH_SEMAK_LAYAK)
Values
('70201849', 9, 1, 1, 1, 1, 1, 1, 1, 1, TO_DATE('04/06/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 1, TO_DATE('12/24/2012 10:46:40', 'MM/DD/YYYY HH24:MI:SS'));
Insert into prl_semak layak
(NO_DAFTAR, EPISOD, TL_HUK, TL_KLAS, TL_JAD4, TL_KESLAIN, TL_LP, TL_RAY, TL_PPI, STATUS_LAYAK, TRKH_LAYAK_PAROL, TL_ROTAN, TRKH_SEMAK_LAYAK)
Values
('670500066', 5, 1, 1, 1, 1, 1, 1, 1, 1, TO_DATE('04/22/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 1, TO_DATE('12/24/2012 11:03:27', 'MM/DD/YYYY HH24:MI:SS'));
Insert into prl_semak layak
(NO_DAFTAR, EPISOD, TL_HUK, TL_KLAS, TL_JAD4, TL_KESLAIN, TL_LP, TL_RAY, TL_PPI, STATUS_LAYAK, TRKH_LAYAK_PAROL, TL_ROTAN, TRKH_SEMAK_LAYAK)
Values
('71000424', 3, 1, 1, 1, 1, 1, 1, 1, 1, TO_DATE('04/26/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 1, TO_DATE('12/24/2012 11:11:01', 'MM/DD/YYYY HH24:MI:SS'));
Insert into prl_semak layak
(NO_DAFTAR, EPISOD, TL_HUK, TL_KLAS, TL_JAD4, TL_KESLAIN, TL_LP, TL_RAY, TL_PPI, STATUS_LAYAK, TRKH_LAYAK_PAROL, TL_ROTAN, TRKH_SEMAK_LAYAK)
Values
('470900549', 1, 1, 1, 1, 1, 1, 1, 1, 1, TO_DATE('12/20/2012 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 1, TO_DATE('11/08/2010 09:15:59', 'MM/DD/YYYY HH24:MI:SS'));
Insert into prl_semak layak
(NO_DAFTAR, EPISOD, TL_HUK, TL_KLAS, TL_JAD4, TL_KESLAIN, TL_LP, TL_RAY, TL_PPI, STATUS_LAYAK, TRKH_LAYAK_PAROL, TL_ROTAN, TRKH_SEMAK_LAYAK)
Values
('30906760', 2, 1, 1, 1, 1, 1, 1, 1, 1, TO_DATE('12/02/2012 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 1, TO_DATE('11/19/2010 08:54:26', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;i give you this sample,table creation and some insert values.So now,what i should do in order to retrieve all these records? -
Forms6i- how do i pass values between two forms
Forms6i- passing values between forms
I have two forms. FORM1 does a call_form to FORM2.
How do i send values from FORM1 over to FORM2?
I want the 2 values in FORM1 to be passed top FORM2 and displayed as a TEXT ITEM.
But i don't know what is involved in passign vales between forms.Define Parameters in Form2, and pass parameters with the same name from Forms1 with the parameter list option of your call_form built-in.
It is in the online help. -
Using functional global variables to transfer data between touch screen device and other targets
Hi,
We are currently developing a control system that will operate on a cRIO with a touch screen interface. During development we have been using functional global variables (FGVs) to handle most of the settings/data etc, however we have just realised that we may have an issue updating the data on the touch screen, and vice versa.
Previously we have implemented similar programs using shared variables, however we were wondering if there is anyway to implement FGVs in a similar manner, whether it'd be a combination of FGVs and shared variables.
Regards,
Mike
Software version: Labview 8.2.1See this thread on LAVA about sharing FGV's across projects. THis should be extendable to cross paltforms (I believe).
You also may want to concider an upgrade to LV 8.5.1. We have found a number of performance related issues with LV 8.2.1 and RT.
If you decide not to upgrade, just remeber what I wrote (above) when you have reason to question the performance.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Maybe you are looking for
-
i have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any sug
-
hi, how do we select a seeded QA given by Corp. for our requirement thanks, Surya
-
ASA5505 hardware failure?
Hi. One of our ASA5505's stopped working the other day. Power led is green and status is amber. The others are off. There is no console-output on boot and it doesn't take input either. Is there anything I can try or is it demoted to paperweight statu
-
Gluing 2 MIDI notes in piano roll view...is this not possible any more?
I am experiencing some very unusual behavior in version 8 - such as no longer being able to use the "glue" tool in Matrix edit mode (now called piano roll) to glue two MIDI notes of the same pitch together into one note. Has anyone been able to get t
-
Downloading from icloud - suggestions of proper use
What is the point of having icloud backup my data if I can't download it when I need it. I have gbs of data just sitting from my old iphone that got lost. I have no clue whats on there and no direct way to get it back. new data shows up on my pc tha