Globalization/translation: Importing application using a new application ID

We want to use the globalization feature of APEX and have created a translation from Dutch to English (application ID's 100 and '101'). This works fine. However, when the application 100 is exported and imported under a different application ID, the translated application ('101') is not imported. We need to import the application using a new ID because we have a development and test version of the same application within one database instance and application ID's have to be unique within one database.
Is there a solution for this problem, except having separate database instances for development and test versions of an application?
Thanks,
Patrick

Hello Patrick,
>> I tried what you suggested but that did not work.
Yes, and I’m sorry about that. That’s what happen when you try to answer from memory, without checking first.
>> <trans-unit id="S-2-101724717460540986-100">
>> The 100 at the end of the trans-unit id probably refers to application 100 and not to application 200.
The problem is not with the application id - that can be easily fixed. The real problem is with the internal components id (the large number) which has been changed. When I first answered you, I thought these would not be changed, as you are using the same workspace (which is indeed the case when you are importing the application into a new workspace, with the same ID number, but on a different APEX instance). However, as you are using the same (physical) workspace, and these IDs must be unique within this workspace, they must be changed upon installation. The result is a very different XLIFF file.
I don’t see an easy solution to this situation. It’s all depends on the complexity and size of your XLIFF file. If it’s relatively small and simple, you can just create a new one. If it’s a large file, it’s probably don’t worth the efforts.
Regards,
Arie.

Similar Messages

Lost globalization translations on application change

I've made a change to my application, by a process of taking a copy of the application, and making the changes to it (all I did was an export/import, nothing clever). However, when I import the updated application back over the existing application ID, I find that the language translations no longer work.
The original application has translations for French, German and Spanish (I believe) but I have not done anything specific with them. My changes are explicitly defined as being English-only - the new fields and pages do not have to be translated.
I know nothing about language translations - that feature was part of the application before I took over support of it, and the fact that I have no knowledge is one of the reasons the new code is English-only.
Can anyone tell me what I might have done wrong, and how I should deploy my changes to preserve the existing translations? Once I have deployed the changes to this environment, I will need to further deploy them into production, from the (hopefully, now working!) test environment. A pointer to relevant documentation would help, although I have read the globalization chapters of the manual and they don't make much sense to me (I'm not sure how seeding translations figures in the case of a modification, and I've no idea how to deal with XLIFF files).
Thanks,
Paul.
PS This is HTML DB 1.6 :-( I'm hoping there are no major differences in this area...

Hello Paul,
>> I've made a change to my application, by a process of taking a copy of the application, and making the changes to it
By “taking a copy” I’m assuming you exported the original application, and then imported it under different ID. This is your basic mistake. As Scott pointed out, in order to maintain translations, you must import the application using the same ID.
>> when I import the updated application back over the existing application ID, I find that the language translations no longer work.
Your copy didn’t include any translation information in the first place, so importing it back, didn’t make any difference.
>> if the translations are separate applications
They are not exactly separate applications. You’ll not see the translated applications, and their application id, in the Application Builder application list.
>> what does that mean for my new pages?
As Scott mentioned in his post, if you are editing an existing pages, and don’t change any translated items, the changes will be reflected, in the primary language, in all the translated application.
However, if you are adding new pages, they will be available only in the primary language application. If a translated application will try to call them, you’ll receive an error message, similar to the one you encountered - Error ERR-1016 Application "103" Page "1" not found (requested language="fr") .
In order to fix that you’ll have to seed the primary language application and export the XLIFF file. As you are saying you don’t need to translate the new pages, just import back the XLIFF file – untouched – apply it and publish the translated application. The new pages, in the primary language, will be added to the translated application.
Hope this helps,
Arie.

Hi guys, i would like to ask about the apple id. Which at this time I have been using the new apple id, can I be able to continue updates all the applications that I have purchased by using the old apple id.

Hey guys, I am newbie here ;(.. I have a question regarding my new apple id. at this moment i've still have all the applications that i've been purchased by using my old apple id.
In case there are an update for the applications in my iphone, " Can i use my new apple id to update all the application that i've been purchased with my old apple id ". If its not possible to do, are there any suggestion for me to updates all the applications by using my new apple id ?
Many thanks ;)

Apps must be updated using the Apple ID used to originally download them to the device.
If you cannot or will not use the old Apple ID, then you can delete the app, and then download it again using the current Apple ID. Be aware that any paid apps will have to be purchased again.

HT1338 I cannot access my iphoto application on my imac as it says I have made changes in Iphoto using a newer version. We have recently purchased a Macbook Air and this has Lion (as opposed to leopard on the iMac) and we are sharing photos between the 2?

I cannot access my iphoto application on my imac as it says I have made changes in Iphoto using a newer version. We have recently purchased a Macbook Air and this has Lion (as opposed to leopard on the iMac) and we are sharing photos between the 2. I am awaiting the upgrade discs for snow leopard and then to Lion for the iMac but is there a way to access my photos until this arrives?

Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Use the new CE 7.1 NWDS for developing 7.0 Portal Applications

Hi all,
We currently evaluate which would be the best development studio for our development. Of course I know the SAP Guideline "use the same NWDS as your support package stack". This would mean we have to use NW 7.0 SPS 16. But we realized there is a new Eclipse Version within CE 7.1 NWDS.
So the question is, could we also use the new NWDS, is it compatible with 7.0 or did anybody try something in the way we want to do?
Thanks for your help,
Stefan

Hi Stefan,
You might want to consider using the "federated portal network" (FPN) capabilities of SAP NetWeaver 7.0 and CE7.1.
FPN in this case allows you can utilize the full composition capabilities of NWCE7.1 to develop applications and then render them in a central 7.0 runtime environment (portal). This is loosely called the "side-car approach".
For more information: http://help.sap.com/saphelp_nwce10/helpdata/en/3e/878ce2eba747e2b065cfb5d4496483/frameset.htm
Michael

HT204088 im from the philippines, i use to used debit card from U.A.E to purchase an application for my Apple Ipad 2, i still have pending unpaid application and wanted to pay it using a new Debit card here in the philippines but is being decline. how wil

i use to used my debit card when i was in U.A.E. Dubai in buying applications for my Ipad 2, now im in my country Philippinehand still have billing balance from my previous purchase. i used my new debit card to pay my pending balance but unfortunately my other debit card is being declined. how can i pay my pending bill? my debit card is sufficient. please help as i cannot update my applications because of that billing problem. Thanks

Debit cards are no longer accepted in the iTunes Store, it seems. The current valid payment methods are listed here:
http://support.apple.com/kb/HT5552
You can try contacting the iTunes Store and asking if there is any way to use your card, but they probably will tell you that it's not possible.
http://www.apple.com/emea/support/itunes/contact.html
Regards.

I have just been told by Adobe that I have to UNINSTALL ALL PREVIOUS VERSIONS OF THEIR APPLICATIONS IN ORDER TO USE THE NEW 2014 VERSIONS.

I have just been told by Adobe that I have to UNINSTALL ALL PREVIOUS VERSIONS OF THEIR APPLICATIONS IN ORDER TO USE THE NEW 2014 VERSIONS. No software update is worth the time it will take to do that!!!!! I don't know about the rest of you but I am woefully disappointed in Adobe. I pay on time every single month SINCE CREATIVE CLOUD BECAME AVAILABLE and now they place this on me? NOT HAPPY.

THE LATEST AND THE LAST:
Oh, and I'm on a MAC, not a PC so how could my database be corrupted?
Shruthi: The caps.db file is located in Library/Application Support/Adobe/caps folder
Shruthi: Can you try uninstalling from Adobe installers.
Susan Meredith: You folks don't understand. Most of us are very excited at the new "bells and whistles" that Adobe has introduced and in the past we've been able to QUICKLY update to the new version. We haven't had to uninstall anything to get the new. We are all working and have deadlines. This is A HARDSHIP ON ADOBE'S USERS AND THEY NEED TO FIX IT ON THAT END. Or give up some monthly fees.
Susan Meredith: There are many ways to uninstall. I can do it through "CleanMyMac". But now I don't trust that Adobe's programs will actually download and then I'm in trouble...and out of business.

Using a newer db version than what a COTS application supports

This is more of a general question ...
My manager today asked me what I thought about moving an application's back-end from SQL Server into Oracle. He was concerned because in SQL Server, they were repeatedly constrained in upgrading the database to newer versions, because the vendor was slow in approving newer versions of SQL Server. He didn't want to impact our plans to upgrade Oracle (95% of our data) because one application (5% of our data) was in conflict.
So it got me to thinking, has anyone ever had a problem using a newer version of the database, than what a vendor claims to support? I guess I'm thinking that as long as the software has a compatible client, then a newer database should be a safe gamble? Am I being naive? It just seems like with Oracle, newer versions bring in newer features, but rarely remove anything.
--=Chuck

I wouldn't run a version of Oracle that the vendor didn't support. While it's true that Oracle isn't likely to remove a particular feature, adding a new feature can cause just as many problems-- you may find that query plans change, for example, or you may find bugs where the COTS vendor assumes that SQL behaves one way because it happens to do that in one version of Oracle but the behavior changes in a future version. Plenty of COTS software assumed that GROUP BY did an implicit ORDER BY because Oracle happened to implement GROUP BY by doing a sort. Until 10g, I believe, when hash group by's were introduced, and suddenly things that were supposed to be sorted weren't sorted anymore.
Normally, each COTS application would have its own separate database. That allows you to upgrade and patch other Oracle instances without worrying about whether the COTS vendor supports it. When the COTS vendor validates their application against the new version of the database, you then upgrade the COTS Oracle instance. So it normally doesn't affect your upgrade schedules for everything else in the world if one application wants to use an older version of Oracle.
Justin

Error while exporting - importing application

Hi All
I was trying to export my apex.oracle.com app and was importing it to my local db installation environment. Encountered with an error:
*1 error has occurred*
*NOT COMPATIBLE (Your export may contain calls not supported by your application version.)*I found that in my local environment, some features were missing like page of Type "Master-Detail" was not there while creating a page in my local instance. (My app is not using any mater-detail page, but it may be using some features which are missing in my local version). Want to know about the following:
1. The APEX 3.2 (apex.oracle.com) DB version so that I can upgrade my DB instance version.
2. Is the error telling about the incompatible application version or the DB version? How can it be addressed?
Thanks
Bhavesh

Hello Bhavesh,
>> That means my env is the newer one, still it is not compatible with the app created on an earlier version. Not sure why?
The compatibility issue you encountered is about the APEX version and NOT the database version. The same APEX version can be installed on different database versions, starting with 9.2.0.3 or later.
As each new APEX version adds new features, which manifest in the metadata table structure (among others), you can’t install an application from an advanced APEX version on an earlier APEX version.
The version on apex.oracle.com is 3.2, while the default APEX installation on a new 11g database is 3.0.1. As such, if no specific upgrade were done to your local APEX instance, you won’t be able to import applications from apex.oracle.com.
As was suggested, the only feasible solution is to upgrade the local APEX instance to the version on apex.oracle.com.
Regards,
Arie.
Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.

Help needed in importing application - Urgent

Hi,
I am new fairly new to apex and would be grateful for any help....
I have an application that i would like to import and install... but i am obtaining an error...
Situation is as follows:
Application in machine A with oracle 10g standard and apex 3.0. Workspace is portal, schema is status_portal...
export is working fine.
Need to import it to machine B with oracle 10g and apex 3.0 Workspace is
online_portal, schema is portal
Import also works fine...
But when i try to install the imported application, i get following error:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-02291: integrity constraint (FLOWS_030000.WWV_FLOWS_FK) violated - parent key not found <pre>begin wwv_flow_api.create_flow( p_id =>134, p_display_id=>134, p_owner => 'STATUS_PORTAL', p_name => 'Status Portal', p_alias => 'F114', p_page_view_logging => 'YES', p_default_page_template=> 3865804637029456 + wwv_flow_api.g_id_offset, p_printer_fri
Please guide me as to what to do....
History:
I have tried exporting from machine A to apex online workspace and installing there.... and vice versa...It is working fine...
the problem arises only when i try import & install on machine B....
Please help me.... i need to do this urgently
Thanks,
Sumana

Hi Scott,
I will not be able to show the actual application, as it has our customer's information. But i have created a sample application and done the export and import. The details are as follows:
Machine A Details:
Workspace name = portal
worskspace ID = 3727029916111535
schema = status_portal
Exported Application Name = Status Portal
Exported Application ID = 117
When importing application from machine A to online workspace:
Online Workspace Details: (when importing application 117)
Workspace Name = sumana
Workspace iD = 3033192431425185475
schema = sumanadb
Imported Application Name = Status Portal
Imported Application IS = 42146
You can access the workspace using: http://apex.oracle.com/pls/otn/f?p=4550:1:
the password is sumi123
When importing application from machine A:
Machine B Details:
1 ) Workspace1 Name = auditws
workspace ID = 7048503433678645
schema = audit_schema
When installing imported application no 117 I get:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful.
ORA-02291: integrity constraint (FLOWS_030000.WWV_FLOWS_FK) violated - parent key not
found <pre>begin wwv_flow_api.create_flow( p_id =>129, p_display_id=>129, p_owner =>
'STATUS_PORTAL', p_name => 'Status Portal', p_alias => 'F114117', p_page_view_logging =>
'YES', p_default_page_template=> 10898936714426385 + wwv_flow_api.g_id_offset, p_printer
Error installing application.
Return to application.
2) Workspace2 name = online_portal
workspace ID = 9302626026712423
schema = portal
When installing imported application no 117 I get:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful.
ORA-02291: integrity constraint (FLOWS_030000.WWV_FLOWS_FK) violated - parent key not found
<pre>begin wwv_flow_api.create_flow( p_id =>159, p_display_id=>159, p_owner => 'STATUS_PORTAL',
p_name => 'Status Portal', p_alias => 'F114117', p_page_view_logging => 'YES',
p_default_page_template=> 10898936714426385 + wwv_flow_api.g_id_offset, p_printer
Error installing application.
Return to application.
3) When importing application no 130 from machine B to machine B
(from workspace auditws and schema audit_schema to workspace online_portal and schema portal)
I get the error as said before
"Access Denied by application security check" Also, i observed that,
the application gets installed in auditws and audit_schema itself...
Screenshots are here:
4) when importing application no 130 from auditws back to auditws, it works fine.

Post Create/Import Application Wizard Action

I'm fairly new to working with SCCM 2012 R2 so most of this will be pure ignorance.
I've had a fairly easy time learning how to craft my own forms and extensions using C# and xml. I'm even getting more and more comfortable using the Admin UI Console Editor; though the sheer amount of detail in that is a bit overwhelming trying to digest
(Series of walkthroughs anyone?)
What I'm wondering is there a way and if so how do I link up a post wizard action to run after the standard create or import application wizard finishes.
Right now I already have a custom wizard that sends an existing application information including it's parent folder tree and it's deployments to our intranet document repository, But that's based on our Application Section in configuration manager organized
in the following way (All are folders obviously except the final item)
Applications
<Manufacturer/Publisher>
<Product>
<Version>
<Actual Application>
I would like to fire up a follow up action to automatically create the folder structure based on the above information provided in the application wizard, and then move the application into its intended destination folder
I could add the logic into my custom documentation form but I would rather have it be something that happens when an application is created so it's one less thing our software packaging staff has to worry about.
Thanks in advance for any help and direction on this.
Ryan

Hi,
How about writing a script to create a application and the script contains codes of creating folder and moving application to a folder?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Major Problem with importing application from QA environment to PROD

We did our first ever full move of our application from our QA server to our PROD server tonight. First, I exported the current PROD application version as a backup. Then I did an export of the application on QA and then imported it into PROD using the same application ID as it had previously (which is the same as it was in QA). When the installation portion of the import was running I received an error. The error was: ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-00001: unique constraint (APEX_030200.WWV_FLOW_WORKSHEET_COND_PK) violated <pre>begin wwv_flow_api.create_worksheet_condition( p_id =&gt; 2700222847807840wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_flow.g_flow_id, p_page_id=&gt; 42, p_worksheet_id =&gt; 7285923079312021+wwv_flow_api.g_id_offset, p_report_id =&gt; 2694211409728899+wwv_flow_api.g_id_offset, p_condition_type+*
h1. We have been unable to get the app installed using the same application ID, so we installed it using a new application ID. However, we have now lost all of the user's saved interactive reports.
h3. So, first, we need to know how to get the user's saved interactive reports put into the new application id. Second, we need to know what the proper procedures should have been for exporting our QA application and importing it into PROD without loosing the saved interactive reports. Hope someone can help us out very quickly - the natives will be very restless tomorrow morning when they find out that they don't have their saved reports.
Thanks in advance for any help you can provide!
Dale

Thanks for your reply Scott.
The problem is that the saved reports are not in the application we are exporting, they are in the one we are trying to update. I'll try to provide a more detailed description of what we are doing. We have two separate server environments, one for our production Oracle databases and our production APEX workspaces and applications. The other is for our development and QA Oracle databases and APEX workspaces and applications. Both environments run the same version of Oracle. So, on the production environment, we have a workspace called "payorprofile" and, within that workspace we have an application with application ID 126. That is where our users have been happily creating their saved interactive reports for the past 4 months. On the development environment, we have a workspace called "payorprofile" and, within that workspace we have an application with application ID 126. Now we have a new version of application 126 on the development environment that we need to promote to production. This newly QA'd version does NOT have the user's saved reports but it has all of the new and changed pages, LOVs, lists, breadcrumbs, etc. We needed to merge the new pages, etc. from dev with the data and user's saved reports on prod. What we did was to export the Dev version without saved reports and then we imported it into the prod system using the same application ID. It asked if we wanted to overlay the current application 126 with the new one and we said yes. During the install step we got the error noted in this post. The only thing we knew to do was to import the dev application as a new application ID (we chose 326). The application works fine, but, of course, we don't have the saved reports. Now we need to get the saved reports into the new application 326 - and I think with the help of some articles and posts on the web we can do that. However, we need to know what to do differently the next time we are ready to promote a version of the application to production.
Thanks,
Dale

[BUG] TP3 duplicating imported application module data controls

Hi,
I'm using TP3.
I have an application project A which imports business components from an other project B. Whenever I open JDev (or the project A) the first time, the imported application modules from the other project B get an new entry in A's model.jpx file. This will lead to duplicate data controls in the Data Control panel.
There might be other possible ways to get duplicate entries, but this one I can reproduce. I'm not sure if there are any implications having duplicate entries (my be longer start up time in OC4J).
Can anybody confirm my findings?
Timo

Hi Frank,
right now I don't have a test case, but I'll try to set one up. This will take some time. Till then I can only describe in detail what I did.
I have an older application Module migrated from version 10.1.2.2 via 10.1.3.3 to 11TP3. The application is used to login a user to our application framework. User name and password are checked against a DB table and if correct some user information is compiled into a bean.
In all of our other applications this login module is used to authenticate a user.
I added the logingmodule.jar ro the classpath and the used 'file->import->business components' to import the application module into a new ADF Fusion Application (this was the method to import application modules from other projects in versions 10.1.2.1 and also worked in 10.1.3.3).
Afer importing the jar I can add the login module to the new application module in the 'Data Model-> Application Aodule Instances' shuffle component.
As far as I found out this triggers an entry in the model.jpx file: <AppContainee
 Name="ber"
 ObjectType="JboProject">
 <DesignTime>
 <Attr Name="_SourceName" Value="loginModel.jar"/>
 </DesignTime>
</AppContainee> This entry gets dulicated every time I open the project in JDev 11TP3 the first time.
I read in the new doc, chapter 31, that there is a new method to reuse application modules (or other objects). This I'm currently checking out. Nonetheless I try to set up a test case.
Timo

Import application

Hi,
we just let the latest version of HTMLDB 1.4.4.00.33 installed on our own environment. I am trying yo move over our ARIA (aria.us.oracle.com/lms: version 1.4.4.00.32) based application to our own environment. While importing with the correct Char set and settings I get the following error (see below).
We just let our environment upgrade to the lastest version to avoid any import/export problems.
Can you help me out?
Regards,
Patrick
Error installing application.
Return to Application
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-02291: integrity constraint (FLOWS_010404.WWV_FLOWS_FK) violated - parent key not found
1534::begin
wwv_flow_api.create_flow(
p_id =>106,
p_display_id=>106,
p_owner => 'LMS',
p_name => 'ORI EMEA',
p_alias => '106',
p_page_view_logging => 'YES',
p_default_page_template=> 326075150375066885 + wwv_flow_api.g_id_offset,
p_printer_friendly_template=> 326075356994066885 + wwv_flow_api.g_id_offset,

Patrick,
Your workspace does not exist in the new HTML DB instance. This must exist before you can import applications into it.
You can either:
1) Export your workspace from the "old" instance and import it into the "new" instance.
or
2) Manually recreate the workspace on the new instance, ensuring you use exactly the same Workspace ID as the one on the old instance.
Joel

Importing Applications from 10.4?

Hi,
I am awaiting delivery of a new iMac and am wondering if I'll be able to hook my lap top with 10.4 to the new Snow Leopard machine (via FW) and be able to import applications between OS?

Yes, you can do what you want. Personally, I would prefer to use a combination of drag and drop and reinstall by hand. Regardless, be sure that Rosetta is installed on your new machine if you will be importing any PPC apps. You can install Rosetta using the optional install folder on your Sno DVD. Check here on [using migration assistant|http://support.apple.com/kb/HT3322] to do what you want.
Message was edited by: donv (The Ghost)

Globalization/translation: Importing application using a new application ID

Similar Messages

Maybe you are looking for