GM posting budget document - error message no. NR009, No changes were made

Hi all,
Iu2019m trying to post a grant´s budget document. The system issues the error message No changes were made message no. NR009.
Any suggestions?
Regards.

Hello Alberto,
First of all, please check these IMG activities and documentation:
Grants Management->Grantee Management->Budgeting and Availability
Control->Budgeting
Maintain Number Range Interval for Entry Documents
(Make any additions or changes you require)
Maintain Number Range Interval for Budget Change Documents
   Requirements
   Use Number range 01 for GM budget change documents.
   Enter 01 and not 1 as the number range.
   Only internal number allocations are valid. You must not set the Ext
   (external number allocation) indicator
Hope it helps
kind regards
Mar

Similar Messages

Post budget document from approved pre-posted budget document workflow

Hi,
We are using budget version "0" for AVC Check and "1" for provision budget used for sending further approvals.
I am uploading provisional budget i.e Pre-posted budget with version "1" and sending two levels for approvals by using SAP Standard workflow.
If pre-posted budget document approved by 2 levels, what is impact on budget posted document?
a) Will Pre-posted approved document be convert into Actual budget document with Version "0" (or)
b) Will Pre-posted document remain same by updating status with "approved", there by User again needs to post actual budget document with Version "0" by using "FMBB"
Please help me
Regards
Sam

CA Sam,
The Pre-posted document will remain the same i.e.approved version 1. In order to create version 0 you can copy from version to version.
Thanks
Shyam

Why am I receiving an error message while trying to change my phone number?

So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later." I was hoping to circumvent the 15$ fee of doing it over the phone. Finally, I decided to do an online chat, the associate did not know why the error was occurring but informed me in order to change my number over chat, i would STILL have to pay the 15$ fee. Something struck me as so wrong there, so conveniently the change features and phone number part of the website was not working, however the view/pay your bill part was always working properly, never received any error messages there. I understood it was not the associates fault however. Still that is wrong. If it was not urgent I would wait. Yes I could have tried the number block, that section was not working either, but having to renew which numbers you want blocked every couple of months makes no sense to me, if I want something blocked, i want it blocked permanently not just for 90 days. Yes I tried call/SMS blocker apps from the app store but they're faulty in that they still give you notifications of when the blocked person/number called/text or do not always block everything all the time. But when it came down to it, even the associate encountered the error message while trying to change my number. So why is this happening. Verizon is expensive but the reception is better however theirs always issues when I need to fix something. Its frustrating

Verizon was having a problem on their end, perhaps a server down for some repair or updating. However you were already aware that there was an on-going problem in your own posting and you decided to continue on.I can understand you wanting this done and trying to save the $15.00 fee. However I would have waited a bit longer until the Verizon issue had been corrected. Yes it is frustrating but again you know in advance of a problem , I can understand that this is most upsetting for you but never try to perform any change when a problem is there and I also do not like to do business on a weekend with no live tech support available. I'm sure this will all work out for you if given some time. Sorry.
So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later."

Just did the iTunes update that iTunes said was available now iTunes won't open, keep getting Runtime Error message. R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.

Just did the iTunes update that iTunes said was available, now iTunes won't open. I just keep getting a Runtime Error message.
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
Is anyone else having this problem?
I tried to re-install and got the following message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)
Does this mean I have now lost everything?

I just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck!

Error message: iMovie cannot save changes to the library!?!

iMovie crashed my computer and now I can't creat a new movie.
Here's the full error message:
iMovie cannot save changes to the library.
The hard disk where your library is located may be full or unavailable or permissions may have changed. To avoid losing your work, quit iMovie.
What's up with this? I tried trashing the preferences, but got the same message. I have a 27-inch late 2013 iMac running Mavericks with 445.55 GB free space.
Please let me know if you have any suggestions.

You've already tried trashing iMovie preferences (By the way think in Mavericks you have to reboot as well after this for the new preferences to take effect) . One other thing to try is creating a new user account, logging in and seeing if you can create a new project in iMovie (of course you won't see your exisitng projects). If you can then iMovie itself is OK. If not then the only other thing I can think of is re-installing iMovie (see http://macs.about.com/od/usingyourmac/qt/How-To-Re-Download-Apps-From-The-Mac-Ap p-Store.htm)
Is everthing else working OK after your computer crash? Maybe you should also run Verify disk in Disk Utility.
Maybe someone-else has some other suggestions (I have not heard of this problem before)?
Geoff

When using Migration Assistant to transfer files from my pc, I get an error message saying that an attempt was made to access a socket in a way forbidden by its access permissions. How can I fix this?

When using Migration Assistant to transfer files from my pc, I get an error message saying that an attempt was made to access a socket in a way forbidden by its access permissions. How can I fix this?

You followed:
http://www.apple.com/support/switch101/

IPhoto 08 vsn 7.1.5 software issue. Can't print a photo. When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh

Can't print a photo. When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh. Uploaded latest update but it still doesn't work. Was going to try and load the software again but can't find the source as a download.
Cheers,
Papasailor

YOu need to reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Imovie 11 on macbook pro get error message cannot save project changes

imovie 11 on macbook pro get error message cannto save project changes:
Please check the disk to ensure there is enough free space and you have permission to write projects. iMovie will try to save periodically, but your changes will be lost if you quit iMovie before the problem is resolved. I have 462 GB disc space available. I don't know about "permission to write projects".

OK - bad luck about that. I hope you weren't too far advanced into your project. Sorry to hear that repairing permissions didn't help.
When working on a long project, it's advisable to duplicate the project from time to time. In Project Library view click on your project then select File>Duplicate Project from iMovie's menu. A number will be appended to the name of the duplicate, otherwise you can rename it. A short-cut is to control-click (or right-click) on the project name, then select Duplicate Project from the pop-up menu. Duplicating doesn't take up much extra space, as the project points to the clips in the Event (or Events) and doesn't contain actual video as such (it's basically a text file which also holds information about your edits, added photos, music, titles and so forth).
Also, it's best to have a backup, such as Time Machine. It gives you peace of mind when things go wrong!
John

Error while posting billing document - Error belongs to Business area/G/L a

Hi All,
When i am posting the billing document i ma getting below error message:
Business Area must be entered, Pl check if the Business Area is correct Message no. ZT017
I think it is due to MWST tax condtion type and respective G/L account only.
When i post 17% tax of MWST i am able to post it - it is having one G/L account,
When i post 5% tax of MWST, i am not able to post it - Different G/L Account - I am getting above error.
Please suggest us to proceed further.
Regards
Lakshmikanth

Hi Lakshmipathi,
This is not at all related to VKOA settings, because the G/L account determination through OB40 here. But every thing is in place. A1 tax code with XXXXXX G/L account is working fine, A2 tax code with YYYYY G/L account is not working fine. If change A2 tax code G/L account to XXXXXX, it is working fine. Here only with YYYYY G/L account issue,
The error details already available in this thread.
Thanks and Regards
Lakshmikanth

IO Budget exceeded error message BP603

Dear Gurus,
I need to make the Error message to Warning relate Internal Order Budget exceeded.
Is there any SAP note suggesting to add Error message BP603 to table T100s.
Application area BP is already given in T100SA. But the message BP603 is not given in T100S.
Now I need a new entry in T100S.
Before doing this I should support from SAP note if any.
Request to you if any inputs.
Thanks in Advance
Aravind

Hi,
Requirement is not incrase the limits. Just RFC user should post with warning message. Manual entry means Error message.
In this Case I should add in OBA5 as Warning message.
To add this entry I need supporting OSS note.
Thanks & Regards
Aravind

Budget exceeded error message

Hi,
We are in SRM 5.0 ECS, with support pack 11.
When a PO is created with account assignment category project statistical (WBS element), with value exactly matching the budget availability, PO gets created, however if tried doing any changes to the PO, it gives an error message - WBS element budget exceeded.
How it can be avoided.
Rgds,
Madhan

Hi Madhan,
Have a look at the following OSS Notes:
Note 1068860 - Extended classic:Budget check errors on trying to change PO
Note 1292419 - Budget exceeded error while changing a SRM purchase order
Thanks,
Pradeep

Pages V5 COULDN'T AUTO-SAVE DOCUMENT error message

Why am I getting this error message when I attempt to save a document, duplicate a document, move a document--"Couldn't Auto-Save Document" I cannot save the document. I originally opened this document from the server computer to my laptop, made changes on the laptop at remote office and now I cannot save it, even to a new location on the laptop.

Hi.
I was just now suddenly afflicted by this problem.
Have new macbook pro retina - iOS X 10.9.2.
Everything is up to date.
Even Pages is up to date. checked it (of course), as soon as I started getting the error message every time I tried to save. Even tried saving or 'exporting' to Word, PDF...still same message.
Now...I recall that any time an app is 'acting up' (i.e. not responding the way it should)...it usually means that it either needs updating, or it has some sort of 'bug' to it.
If it needs updating...then simply update it. I checked that option...and got message that Pages is indeed up to date.
So...opted to simply 'force quit' pages (as well as quit many other still-open apps that I wasn't using at the moment...to try to cut down on excess memory being used...thinking that may be part of the problem.
Also...thought that maybe my hard disk was getting rather full...so opted also to move all my music, movies & pictures to an external hard disk to free up internal storage space (by eventually deleting all after first backing up to external hard disk)...and then of course finally freeing up all space by emptying the trash.
Then...after force quitting pages (and all other non-used apps at the time)...and still before completing the transfer of all those heavy files to an external hard disk...then I re-opened pages to test it...and 'WHOALA!"...it worked just fine!!!
So...it seems that this was the solution...at least for me at this moment...to simply force quit the renegade app, and then re-start it.
If that didn't work, I was going to simply shut down the computer...and do a complete re-start. That is another option that often times gives a new look to life for apps which are acting up.
OK...just thought to put in my two cents-worth here.
Hope this helps someone else.
Regards,
Balqees Mohammed.

BP603 Budget exceed error message customization

Hi,
I have set the error message BP603 from error to warning in Tcode OBA5, still i am getting the error message.
Can somebody provide input on this.
regards,
Khan

Hi,
Please select the following path in your customizing transaction SPRO:-
Controlling
Internal Orders
Budgeting and Availability Control
Define Tolerance Limits for Availability Control
Here you can see the Controlling Area and Profile information, you will also be able to see a column called 'Actn' in which you probably have a value of '1' or '2' which represents 'Warning' or 'Warning with MAIL to the person responsible' respectively, the third option here is '3' 'Error message', these are usually set depending on the Usage percentage that is defined.
regards
Waman

I have files that have been on my computer for over a year and all of a sudden they wont open and an error message comes up saying they were improperly downloaded or came in an email attach which is not the case

I have files that have been on my computer for over a year and I have used them several times and all of a sudden they wont open. I received an error message saying they are improperly downloaded or came as an email attachement which is not the case. Please advise

They seem to be word files - they will open if I choose "open with" microsoft word, but if I double click they don't open they are appearing as PDF on my screen. I even opened one and then tried to "save as" making sure I chose .doc and they still appear as PDF
I just created a new document response.doc in word and when I saved to my desktop it appears as a PDF file and I absolutely did not create a PDF or save as PDF it was a simple word
doc.
The message says "Adobe reader could not open response.doc because it is either not a supported file type or because the file has been damaged (for example attached in an email and not properly decoded)
The reader version is I believe the most current, I always update when prompted. OS is Windows 8

Why do we get First operand...error message when trying to change password

Hi
I'm new at posting here, so sorry if I'm doing this wrong. I did search first to see if there was info on this already, but I didn't find anything. (If there is already something out there, please point me to it.)
We are using PeopleSoft Financials 8.8 SP1.
We have basic workflow enabled in expenses which generates an email to an approver with a link into PS Expenses (right to their worklist area) when they have an expense report to review. When the user clicks the link they are directed to the PS sign on page. Normally they can sign on without any problems. However, if their password has expried they will be redirected to a page which says "Your password has expired. Click here to change your password." When they click the link they recieve a blank page with an error message that starts out as "First operand of. is NULL, ".
I cannot replicate it in our test environments.
I have confirmed that we have the PSWDEXPR permission list in our environment.
I have also confirmed that our template for Change Expired Password is correct (PeopleTools > Portal, Structure & Content > Folder, "Tools - Hidden" > Change Expired Password > Template is PRTL_TEMPLATE_PASSWORD_EXP)
I have also tried changing our brower cache to 0. (PeopleTools >Personalization >Personalization Options > Option Category Level = PeopleTools, Format tab, User Option of METAXP. I changed METAXP to 0 instead of 900 which was set by default).
The odd thing is that if the user waits one day, they can use the link in the expense workflow email and change their password no problem.
Also, when our users do experience this problem, if they log into PeopleSoft without using the link from the expense workflow email the change password function works fine.
The link seems to be okay since it works fine at all times unless the user is prompted to change their password.
Any suggestions?

Try the troubleshooting tips here:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
You may have something in your project on one of the slides that is tripping up the publishing process.

GM posting budget document - error message no. NR009, No changes were made

Similar Messages

Maybe you are looking for