Gmail won't send emails

When I try and send an email from my gmail account the following things occur.
Pre acts as though it is sending the email.  All looks as it should.
I get an error saying that it was unable to send the email
email sits in outbox and every couple of minutes the Pre tries to send the email only to give the error message again.
Some of the attempts to send the email make it through but I have no indication as to when it goes through as it stays in the Outbox and keeps giving me the error messages 
I have to go into the Outbox and delete the email to get the error to stop coming.  At this point I may have sent a copy out or I may have sent 5 copies out.  I have played with the account settings based upon what I have seen recommended to others having similar issues to no avail.  Here are my account settings: smtp.gmail.com, Authentication on, username with and without @gmail.com has been tried, password has been entered multiple times to make sure it is there correctly, SSL, and Port 465.  Please help!
Post relates to: Pre p100eww (Sprint)

I am having the exact same issue. I am unfortunately not sure when it began.
Icthusman1, have you installed any patches? I suspect it may be an issue caused by one.
EDIT: After a little more research, I found a solution that worked for me. Check out this thread: http://forums.precentral.net/gsm-pre/216747-problems-sending-email-since-1-3-1-a.html
Message Edited by dguitaramann on 11-29-2009 01:11 PM

Similar Messages

  • Gmail authentication required. Won't send emails on Mac

    Gmail suddenly stopped sending emails from my mac mini. Authentication required pops up. Did an apple update fairly recently. I have checked the outgoing server and it is was set to gmail offline, however no other choices were given. I have tried everything. I am receiving emails without issue. Please help!

    Is it POP or IMAP?
    The Password/Authentication rejection can confuse people since it's a catch all meaning...
    This Password, Username, Authentication method... is not recognized on this Port to this Server.
    If WebMail works in a browser, it's not Name or Password, but one of the other ones.
    Or Keychain has more than 2 entries for that account one incoming, one outgoing.
    The receiving email ports are:
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    Outgoing ports are...
    SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

  • After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
    From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
    I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
    I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

  • Upgraded to 5S and my bt email address won't send emails

    Upgraded to 5S and my bt email address won't send emails, how do I resolve this?

    Thanks that was the first thing I did.  It will receive emails but it won't send them. 

  • My emailer won't send emails since I installed Yosemite

    Just as above - the emailer won't send emails although it does receive them This has only happened since I installed Yosemite a few days ago.

    Troubleshooting Apple Mail
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • IPad won't send emails but iPhone does. iPad message says server does not recognise email address resetting account makes no difference what else can I try?,

    My iPad won't send emails despite identical settings with iPhone which does work. " server does not recognise email address" resetting account fails to solve issue. What else can I try?

    Have you checked ALL the settings including the port assignments? Easiest way to get those back to is to delete the email account from the iPad then redo the email account. Usually the ISP providing the email account will have instructions on their web site.

  • TS3276 Mac Mail won't send emails with signatures

    My Mac Mail won't send emails with signatures. I get the "whoosh" sound and they show in sent mail, but the recipient doesn't receive them until I take off the signature and resend the email. Without a signature, it is received. It never used to be a problem, but started this past month. Please advise!

    Did Earthlink have you try using their authenticated SMTP server?
    If not, try changing Earthlink's SMTP server settings to the following:
    SMTP Server: smtpauth.earthlink.net
    Server Port: 25 or 587. Assuming Earthlink is your ISP, 25 should work.
    Use Secure Sockets Layer (SSL): Off or not selected.
    Authentication Type: MD5 Challenge-Response. Not sure if this authentication type is available with 10.2 and if not, select Password.
    User Name: Your entire Earthlink email address.
    Password: The password for your Earthlink email account - the same password used to check the incoming mail server for new messages.

  • TS3899 my iPhone 5s won't send email but receives email fine

    my iPhone 5s won't send email but receives email fine

    Hi Robgt8,
    Thanks for visiting Apple Support Communities.
    The steps in this article can help with troubleshooting your iPhone 5s is email will not send:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Cheers,
    Jeremy

  • Calendar won't send email reminders since updating to Mavericks?

    Since upgrading to OS Mavericks Calendar won't send email reminders.
    I have been able to set them.  But they don't actually send.
    I have visited multiple sites and discussions and attempted the suggestions posted there but nothing seems to help.  I have even contact Apple feedback, and still haven't heard back from anyone.
    Just to clarify, i have attempted the following fixes:
    - Adjusted email settings to ensure iCloud ermail account is properly set up
    - Adjusted reminder settings in calendar to ensure the reminders should send
    - ensured that "My Card" is properly set up in Contacts
    I can't seem to find anything else to help?  Anyone have any ideas?

    I am haivng the same issue too.
    According to some other posts, I deleted and readded the "Me" record in the address book. When creating a new calender entry I set it to send email. When the notification pops up it's just a normal alert and no email.
    Any ideas?

  • IPhone won't send email

    My iPhone 4S won't send emails. I can receive emails just fine but I can't seem to send any. Each time I try to send an email it says my password is incorrect (which is isn't). I've checked my STMP server to make sure the information on it was correct but when I typed in my password it wasn't responding. Any other suggestions or solutions I could try to fix this problem?

    Hello Chantelle103
    If everything checks out, then the only other option is to remove the email account and then add it back. Then test with sending out the email again.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Regards,
    -Norm G.

  • Installed Lion, Outlook 11 for Mac won't send email anymore

    Hey all - I installed Lion but now my work Microsft Outlook 11 accounts won't send email...looks like they receive though. Happening to anyone else? Any ideas on a fix?

    In Finder you have to go to your user account's library, which Apple hid in Lion.  You can still get to it by using the "Go to Folder" option in the Finder>Go menu.
    In the dialog option that comes up, type in ~/Library
    Inside the library is a "Caches" folder, and inside that folder is one called ".com.microsoft.outlook"
    Try deleting that?  As always, make sure you have a good backup before deleting anything in the library   Hope it helps!

  • HT1338 my mac won't send emails but can receive them

    mac won't send emails but can receive them

    Hi Mick209
    I am in the UK and eventually found the problem was due to my BT Home Hub Router.  Not sure where you live, but of you are in the UK, this might work for you.
    I found this fix below on https://discussions.apple.com/thread/4604180?start=15&tstart=0
    It worked for me.  If you can't link to the URL, here is the body of the text
    There's an issue related to the BT homehub that is providing a hostname that is "syntactically incorrect" for several smtp server.
    Here's how you can fix it.
    Using your internet browser, go to the address "192.168.1.254
    - Follow instructions to reset your password if asked.
    - Then go to "Settings", then "Advanced Settings" and "home network"
    You will see there all the devices that are connected or that has been connected before. It's gonna be easyer if yout computer is the only one connected.
    Your computer should have a name like "unknown-xx:xx:xx:xx:xx ...
    Click on this name, chose another name without any special characters, like "macbook" for exemple.
    And then click on "apply"
    - restart your computer.
    That should fix the issue.
    Credit goes to vincentfromcork for providing me with the solution.
    If it works, spread the word :-)

  • When using 3G on my ipad2, gmail won't send mail.  The 2 emails i'm trying to send have 3 pictures attached and are stuck in the Outbox-checkd server under settings

    Been trying to send 2 emails from Ipad2 with pictures attached from gmail.  Both emails have been stuck in my Outbox and gmail continually tries to send but i keep getting a nessage that the gmail server can't be found.  Went under settings, checked server and it seems fine.  I don't have Wifi @home or else i'd try switching.  Any ideas of what could be happenin'?

        daviddavidff, we want you to be able to send and receive! If Earthlink has confirmed the outgoing server settings and you can access the email and send without issue from a labtop I would lean away from it being an issue with the account. If you can receive email then we know the device is communicating with the network.
    I would try deleting the any email in the outbox folder http://bit.ly/1g1labk and then attempt to send a new email. Send the email to your own email address so we can verify success. Let us know if you can then send email.
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • Gmail on iPhone (IMAP Account) Won't Send Emails

    So my IMAP account on my iPhone 3G is Gmail. Yesterday I could send emails all over the place and it worked fine. I turned on my iPhone 3G today and for some reason it kept saying "The Sending Address is Invalid" message every time I tried to send an email. My IMAP is also linked to my MacBook's Mail utility and I can send messages there no problem. It's just on my iPhone 3G that seems to be the problem. I even tried deleting the account and re-setting it up on my iPhone 3G...I've even tried contacting Google for help with Gmail setup but so far, nothing has worked.
    Is anybody else having issues with their IMAP email accounts on their iPhone 3G's? Does anybody know how to fix this?

    Hey, so I checked the Google Discussion Forums and yes, it is a Google problem. I turned off my primary SMTP server which is Gmail, and I turned on my ROGERS SMTP server. This way I can still receive Gmail messages on the IMAP server and send out emails on the ROGERS server. I guess we'll just have to wait till Google fixes whatever problem there is with the Gmail SMTP server before we use them again. Hope that helps everyone with this problem.
    p.s. This should work for FIDO customers as well (other Canadians) and AT&T in the U.S.

  • Gmail won't send on iPhone 4S/iOS 7.1

    Just got a new iPhone and had problems connecting to Gmail. Someone here helped me out and got that problem fixed. Now it won't send. I get the message:
    "Unable to send Email"
    "A copy has been placed in your Outbox. The sender address "[email protected]" was rejected by the server."
    So I have four emails in my outbox that I can't delete, and they won't send. I can receive email on the phone. I can send and receive email on my iPad and one my computer. So it is a setting in this phone that isn't configured right.
    Any ideas? Thanks in advance.

    Ok - the problem is solved. I'm going to give you the solution so that you can help others in the future, because it is kind of a pain in the butt, and you mentioned that you didn't use gmail. Before I tell you, thanks for trying to help. It is appreciated.
    So for some reason, if you use the built in mail applcation instead of the gmail app, AND if you have two-step authenticaiton turned on (which I do) you can not use your standard password. If you are not using two-step authentication, this is not a problem.
    So, you have to go into your gmail account from a web browser, go into your two step authentication settings, and generate what is called an "application specific password." You give it a name. For example, I have one for my iPad, one for my iPhone, etc.
    The problem I had was that I had put the applicaiton specific password in for checking mail, but not sending it, because it was marked as "optional" so I didn't think I needed it in both locations since all of my email popped up right away. So I generated a new password for the iPhone and put it in both incoming and outgoing email, and it worked.
    Thanks again for trying!

Maybe you are looking for

  • How do I recombine tracks from one album that have been split up in the iCloud

    I have a number of soundtrack albums where each track is atributed to a different artist.  When they go into iCloud they sort as multiple "albums", one for each artist.  They show the same album name but each track is mixed amoung my other albums alp

  • Unable to update payment cards data through ORDERS05 in va02

    Hi all, I noticed one thing that in IDOC_INPUT_ORDERS (ie creation of sales order)  we have a bdcdata populated for payment cards (for header in VA01) .But when we are changing sales order by IDOC_INPUT_ORDCHG (change sales order VA02) we have no bdc

  • Why I cannot export Video from my Premiere CS6 to my DVC PRO AJ-D455?

    I am trying to export video from my Premiere CS6 to my DVC PRO AJ-D455 I can only capture the video but not export, why?

  • Redirect From PL/SQL Procedure

    Hi I hope this is a relatively straightforward question, but I am having trouble getting a page redirect to work from a PL/SQL procedure. I call the following procedure:- CREATE OR REPLACE PROCEDURE DOWNLOAD_FILE(p_id NUMBER) AS v_mime VARCHAR2(200);

  • Load failed

    Hi Experts, When i am loading data into cube the below error occured. Value 'MC2008020' of characteristic 0FISCPER is not plausible can anyone give me solution. David