Gnome and kde not loading with systemd

Hello!
I use [testing] repo and after some updates i can't use gnome or kde with systemd anymore.
* with sysvinit everything works
* xfce and other wms works fine with systemd and sysv
* 'gnome-shell --replace' also work in xfce with systemd
* I've got some errors:
gnome-session[2301]: WARNING: Application 'gnome-settings-daemon.desktop' failed to register before timeout
(gnome-settings-daemon:2321): libupower-glib-WARNING **: Couldn't enumerate devices: Activation of org.freedesktop.UPower timed out
gnome-session[2301]: WARNING: Application 'gnome-shell.desktop' failed to register before timeout
(gnome-settings-daemon:2321): color-plugin-WARNING **: GDBus.Error:org.freedesktop.ColorManager.Failed: failed to obtain org.freedesktop.color-manager.create-profile auth
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Object::connect: No such signal QDBusAbstractInterface::DeviceAdded(QString)
plasma-desktop(2323): Communication problem with "plasma-desktop" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
I think there is some problems with dbus...

Without a dbus socket, dbus probably isn't running. It's supposed to be started automatically when a program needs it. Check to see that it is installed and running:
pacman -Q dbus
pgrep -l dbus
Dbus won't run without hal, so hal should be in:
tail /etc/rc.conf
Are any of your partitions full?
df -h
For the other error, it looks like libdrm isn't installed, but I don't think you need it if you're running the nvidia driver.
Your xorg.conf and Xorg.0.log would also be useful. Also check dmesg for errors.
And see if /etc/rc.d/dbus is marked executable.
Last edited by fphillips (2009-05-12 18:27:41)

Similar Messages

HT201343 I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and third generation loaded with the latest software. Can someone help?

I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and 3rd generation loaded with the latest software. I can succesfully transmit from my itunes on my Macbook pro to both Apple TVs, but I can not see the airplay icon on the taskbar. Can someone help?

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay

When I publish projects with AICC reporting enabled the SWF "breaks" and does not load.

When I publish projects with AICC reporting enabled the SWF "breaks" and does not load. If I change the publish method to SCORM the SWF works, and if I turn off reporting the SWF also works.

OK. That makes sense now. Captivate 6 changed over to Rustici's LMS drivers. Cp7 must have made even further changes that mean you must have an LMS present if you turn on reporting.
I would suggest you just turn off reporting while you are testing other aspects of the course functionality during development, and only turn on reporting when you are ready to upload to your LMS.

Apple home start page will not start and games will not load with flash.

Apple home start page will not start and games will not load with flash.

Never mind...I just figured it out. Restore windows when quitting box in Gen Prefs must be unchecked. To many new little things.

Is X-windows and GUI desktops supported on the ODA "engineered system" running a RAC database? If it is, what is the yum command needed to install the X-windows, Gnome, and KDE package groups?

Is X-windows and GUI desktops supported on the ODA "engineered system" running a RAC database? If it is, what is the yum command needed to install the X-windows, Gnome, and KDE package groups?

While I agree with the direction of the suggestions with installing packages for X-windows, we do not have a blanket 'apply any package' recommendation.
In particular we do not support altering the kernel (although we do have exceptions which we review on a case by case basis).
Basically, if the you want to alter functionality that would not impact core functionality you are usually fine.
A good guideling is : The more dependencies that there are between the package / rpm you are considering using the higher the potential impact on functionality - meaning higher chance for problems
Note: We do use VNC including Real and Tiger regularly , but we have no hard recommendation on how you may want to use X-windows. I have never seen a limitation other than comments on bugs
or incompatibility within the X-window product itself with certain kernel levels.
Patching may overwrite some packages that you may install, however, _depending on packages/rpms added_ there is also the possibility that you will break existing functionality to the point
that patching itself will fail ( we have already seen a few cases of this in which case the proper mitigation is to remove / roll-back any alterations to the ODA before patching, and then adding the packages/rpms
back after the patching is completed.
From what you are discussing the impact should be low without conflicts, but please consider the above, and if you have specific packages which you consider potential problems
please create an SR so that we can review packages / rpms on an individual basis.
Once again: the main criteria for not supporting rpms is regarding the kernel itself
Chuck

I don't want all those GNOME and KDE libs on my system!

Kde Libraries/Base/Bindings - 80 megs
Full KDE - 200 megs
Full GNOME - 80 megs
Base Gnome - 55 megs
I hear so many people saying "Ew, it's using gnome-libs I don't wanna install that" I have said this many times. It's seemed like a lot of usage on my hard drive with all those packages... In reality, 50 megs for GNOME libs or 80 megs for KDE isn't a lot at all.. Heck, UT2004 is around 90 times bigger than installing base KDE and GNOME libs. Thanks to modern technology, most PCs have 80 - 120 gigs on them.. Even with this 30 gig hard drive, 150 megs does not even put a dent. Unless your using a floppy for your hard drive, it won't hurt to install gnome and kde libaries. You need a gig and a half for just winblows stuff! Just because it says:
Targets: hal-0.2.97-2 libgsf-1.9.1-1 gnome-desktop-2.8.0-1 nautilus-2.8.1-1
nautilus-cd-burner-2.8.1-1 libdvdcss-1.2.8-1 libdvdread-0.9.4-2
libdvdnav-0.1.9-2 faac-1.24-1 faad2-2.0-5 hermes-1.3.3-1
libmikmod-3.1.11-1 gtk-1.2.10-4 mjpegtools-1.6.2-1 gst-plugins-0.8.5-1
totem-0.99.19-2
Total Package Size: 11.5 MB
Proceed with upgrade? [Y/n]
It seems like a lot of depedencies, being on four lines and all... But it's really not that much. I won't hurt to have it on your PC.
Just my .2 for the day

xerxes2 wrote:
kth5 wrote:hmm, i have exactly the same scenario on my laptop. it's only a Celeron 700 + 256MB ram. i run kde, mozilla thunderbird, several konsole session, xchat2, xmms plus some more konqueror session w/o any problem. only thing that is lagging behind is my GFX card which needs a share of the system memory. anway, my system in KDE w/ all these apps up needs only ~120MB the rest is filled up w/ diskcache or whatever. it's not bad for a desktop system that is not supposed to render 3D or viewing 100MB+ large files from memory.
I'm impressed!
I havn't tried kde since 3.2.0 and it was totally unusuable due to bugs, crashes, bloat and so forth,
the kde devs must been busy since then...
I was even quite impressed with KDE 3.3.x. I use KDM for my default DM all the time.. GDM is too buggy.. WDM/XDM too ugly... I actually made KDM look pretty sexy.. People say you can't, but it's not that hard... I'll make some screenies if anyone want some

Ipod will not update and will not sync with photos

I had a 5th gen 60gb ipod video that died and was switched out for a new one at the apple store. now when i plug it into my powerbook G4(667) it keep coming up with a window stating (can not update , error code -208) I've taken my ipod to apple store and it was working fine on thier machine. but can not get it working on mine. reinstalled itune, ipod up to date. it will not sync up with my photos and will not load some of my mp3 files. tech support hasn't helped much. tried few options with preference but still not working.

I just needed to move some files around!

CR files will no longer show in bridge and will not load into PS

Hi I had a problem with bridge CS6 dynamic link failing and had tech support finally help with the problem by phone They had me reinstall PSCS6 and Bridge among other things like setting the permissions differenty. It worked ok when I opened it again after those changes and then I closed the apps and opened them again the next day (today) but now the CR files will show no thumbnails nor previews in bridge and will not load into PSCS6.
I get now the following error messages
These are files that are on my system and not from a camera plugged into the computer. They had worked just fine before the reinstall and permisisons changes the tech had me do. They open in the preview app and look fine so I know they are not corrupted files and I have tried different saved versions of the same (or any other CR file) and none of them will now open and Camera raw itself seems no where to be found. My prefences in camera raw have not clanged. Any ideas??? thanks and aloha, UP
I tried image processor in bridge to make them PS files and got the following error message.
I tried to load one of the CR files from the finder dirretly and got the following error message.
Any help would be appreciated. If the post goes inanswered I will call tech support again. aloha UP

HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. iTune out??

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. And, of course, on startup, a window opens with the error and tells me find QTMovie.dll and delete it because this may be the source of the hangup. Also, in trying to delete iTunes, I get the additional message that I must get approval from the System Administrator to take this action. I am the System Administrator.
Any ideas would be welcomed.
Thank you.
James
<E-mail Edited by Host>

Thank you for asking this question. I'm having the same issues.
Liz

HT4623 My sister has given me an old iPod touch 2 I think it is and after resetting the account info to mine the content was wiped and can not load any games now as it runs 3.1.3 and there all saying they need iOS 5 how can I update it to this

My sister has given me an old iPod touch 2 I think it is and after resetting the account info to mine the content was wiped and can not load any games now as it runs 3.1.3 and there all saying they need iOS 5 how can I update it to this

I suspect you have the original, 1G iPod touch. Those can only go as high as iOS 3.1.3,
If y ohave a 2G those can go as high as 4.2.1
Identifying iPod models
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later.
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I'm sorry no-one has answered you yet - I'm afraid I don't know the answer to the question: but I wanted to put into your mind that starting up with AppleWorks at this stage isn't a good idea. The program was 'end-of-lifed' years ago, it won't run on Lion, and some of the document types created in it - Databases in particular - cannot be opened at all by any other program whatever. Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (with some reservations in both cases), but building up a collection of AppleWorks documents at this stage is going to lead to problems later on.
It's difficult to know what to recommend for a PowerPC machine that would still be compatible with modern ones. An older version of Microsoft Office, perhaps, if you can find one which will run on PPC; but most of the modern Word Processors are Intel only. This is something you would need to investigate.

Since updating to iOS 7 iTunes crashes and will not load on my 4s

Since updating to iOS 7 iTunes crashes and will not load on my 4s

I tried resetting to factory and that worked for a couple of hour then I ended up with iTunes crashing again. So I logged out and logged back in and so far so good. This has kept me working for 3 days now so I won't guarantee a fix but it seems to have worked.
Go to Settings->iTunes & App Store click on your login email and select logout. I closed all of my open apps at this time and restarted my phone which was probably an overabundance of caution, but I wanted to ensure any temporary files were gone. Log back in and hopefully all will work for you.
Good luck.

Could not load iCloud preference pane and could not load internet accounts preference pane

after a recent not so succesful time machine restore, and after turning internal hard drive and ssd on my macbook pro late 2008 into a fusion drive, I get these error messages in the system preference : could not load iCloud preference pane and could not load internet accounts preference pane. I noted that Mail, Calendar, notes etc all sync to my various device, but on my mac, I can't access the accounts feature. Can anyone help me resolve this issue ? I searched all over the net with no success...
cheers !

iMac (Processor 3.2GHz, 8GB 1600MHz DDR3, 3TB HD) Running Mavericks (10.9.4), I have the exact same problem. Local Apple Store unable to help. Turned to my AppleCare Program. They say their techs have never come across this issue this was what was done:
Have downloaded & new copy of OS X = same issue.
Deleted OS X Reinstalled OS X on blank drive - restored all my data from backup = now have no MS Office, no Adobe Photoshop Elements, no iWeb, no Parallels, no VMWare, no iPhoto in fact, nothing of "my" machine. (but problem is still there)
Advised to do an "Internet Restore" from good Backup (over 24 hours to complete); when complete, machine restarts = a circle with a cross diagonally through it and the spinning wheel. (It goes no further no matter how many times you reboot)
Now on my own, booted using "Command + R" to start in Recovery mode. Changed all permissions in Disk Utility. Rebooted. = my machine is back - all data intact and all programs there & working BUT problem persists.
I have now turned to Communities. Followed everything people said worked for them but in my case, after a reboot, I still cannot load iCloud OR Internet Accounts Preferences panes!!
If I add a calendar item on my iMac it will not sync with either my iPad or iPhone. If I add a calendar item on either my iPhone or my iPad that item will sync with the other device but will not sync to my iMac. The same is true for Contacts as well. Extremely annoying to have to type it in all the time. This is Apple for heavens sake and therefore it should work!!

When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks :)

When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks

Let's first try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.

Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario

Gnome and kde not loading with systemd

Similar Messages

Maybe you are looking for