Gnome-shell segfault when using fglrx

I have again tried to switch to the proprietary ATI Catalyst drivers as I wanted OpenCL support. When I attempt to login I get the "Oh no!" error screen.
dmesg:
[ 33.063458] 2:3:1: cannot get freq at ep 0x82
[ 34.186831] 2:3:1: cannot get freq at ep 0x82
[ 37.022969] gnome-shell[1635]: segfault at 5 ip 00007ff4f0b6af59 sp 00007fffafafd0c0 error 4 in libcairo.so.2.11000.2[7ff4f0b32000+a9000]
[ 37.423318] gnome-shell[1662]: segfault at 5 ip 00007fc69e495f59 sp 00007fff3f6a5bc0 error 4 in libcairo.so.2.11000.2[7fc69e45d000+a9000]
[ 652.305051] gnome-screensav[1647]: segfault at 5 ip 00007f968c453f59 sp 00007fff38525440 error 4 in libcairo.so.2.11000.2[7f968c41b000+a9000]
I just did a full system upgrade, hoping that would solve something, but it did not.
Any ideas?
EDIT: The wiki says support for gnome-shell with fglrx is "not very good". Is anyone else using the two together successfully?
EDIT 2: I am running two monitors, so this bug looks relevant: https://bugzilla.gnome.org/show_bug.cgi?id=649676
EDIT 3: Just don't use fglrx with GNOME if you want to maintain some sanity.
Last edited by whackedspinach (2011-06-04 01:34:44)

I succeded running gnome-shell with fglrx but performances suck and I get a lot of glitches, back to open drivers.

Similar Messages

X segfaults when using fglrx

So after reading this post in my thread from the other day, I've decided to try and get fglrx working to see if this would resolve my issue. All went well in installing and building the driver modules, but when restarting X, I got thrown back to a console with a segfault.
Here's /var/log/Xorg.0.log:
[ 4129.616]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 4129.616] X Protocol Version 11, Revision 0
[ 4129.616] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 4129.616] Current Operating System: Linux zeus 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
[ 4129.616] Kernel command line: root=/dev/disk/by-uuid/0131902b-69c9-4d45-8e29-000d52a0ecc8 ro
[ 4129.616] Build Date: 05 March 2012 05:59:48AM
[ 4129.616]
[ 4129.616] Current version of pixman: 0.24.4
[ 4129.617] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4129.617] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4129.617] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 26 18:14:05 2012
[ 4129.618] (==) Using config file: "/etc/X11/xorg.conf"
[ 4129.618] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4129.618] (==) ServerLayout "aticonfig Layout"
[ 4129.618] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 4129.618] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 4129.618] (**) | |-->Device "aticonfig-Device[0]-0"
[ 4129.618] (==) Automatically adding devices
[ 4129.618] (==) Automatically enabling devices
[ 4129.618] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4129.618] Entry deleted from font path.
[ 4129.618] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 4129.618] Entry deleted from font path.
[ 4129.618] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4129.618] Entry deleted from font path.
[ 4129.618] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4129.618] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4129.618] Entry deleted from font path.
[ 4129.618] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4129.618] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 4129.618] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4129.618] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4129.618] (II) Loader magic: 0x7cef60
[ 4129.618] (II) Module ABI versions:
[ 4129.618] X.Org ANSI C Emulation: 0.4
[ 4129.618] X.Org Video Driver: 12.0
[ 4129.618] X.Org XInput driver : 16.0
[ 4129.618] X.Org Server Extension : 6.0
[ 4129.619] (--) PCI:*(0:1:5:0) 1002:9710:103c:2ab1 rev 0, Mem @ 0xd0000000/268435456, 0xfe8f0000/65536, 0xfe900000/1048576, I/O @ 0x0000d000/256
[ 4129.619] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4129.619] (II) "extmod" will be loaded by default.
[ 4129.619] (II) "dbe" will be loaded by default.
[ 4129.619] (II) "glx" will be loaded by default.
[ 4129.619] (II) "record" will be loaded by default.
[ 4129.619] (II) "dri" will be loaded by default.
[ 4129.619] (II) "dri2" will be loaded by default.
[ 4129.619] (II) LoadModule: "extmod"
[ 4129.619] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 4129.619] (II) Module extmod: vendor="X.Org Foundation"
[ 4129.619] compiled for 1.12.0, module version = 1.0.0
[ 4129.619] Module class: X.Org Server Extension
[ 4129.619] ABI class: X.Org Server Extension, version 6.0
[ 4129.619] (II) Loading extension MIT-SCREEN-SAVER
[ 4129.619] (II) Loading extension XFree86-VidModeExtension
[ 4129.619] (II) Loading extension XFree86-DGA
[ 4129.619] (II) Loading extension DPMS
[ 4129.619] (II) Loading extension XVideo
[ 4129.619] (II) Loading extension XVideo-MotionCompensation
[ 4129.619] (II) Loading extension X-Resource
[ 4129.619] (II) LoadModule: "dbe"
[ 4129.619] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 4129.619] (II) Module dbe: vendor="X.Org Foundation"
[ 4129.619] compiled for 1.12.0, module version = 1.0.0
[ 4129.619] Module class: X.Org Server Extension
[ 4129.619] ABI class: X.Org Server Extension, version 6.0
[ 4129.619] (II) Loading extension DOUBLE-BUFFER
[ 4129.619] (II) LoadModule: "glx"
[ 4129.619] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4129.619] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 4129.619] compiled for 6.9.0, module version = 1.0.0
[ 4129.620] (II) Loading extension GLX
[ 4129.620] (II) LoadModule: "record"
[ 4129.620] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 4129.620] (II) Module record: vendor="X.Org Foundation"
[ 4129.620] compiled for 1.12.0, module version = 1.13.0
[ 4129.620] Module class: X.Org Server Extension
[ 4129.620] ABI class: X.Org Server Extension, version 6.0
[ 4129.620] (II) Loading extension RECORD
[ 4129.620] (II) LoadModule: "dri"
[ 4129.620] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 4129.620] (II) Module dri: vendor="X.Org Foundation"
[ 4129.620] compiled for 1.12.0, module version = 1.0.0
[ 4129.620] ABI class: X.Org Server Extension, version 6.0
[ 4129.620] (II) Loading extension XFree86-DRI
[ 4129.620] (II) LoadModule: "dri2"
[ 4129.620] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 4129.620] (II) Module dri2: vendor="X.Org Foundation"
[ 4129.620] compiled for 1.12.0, module version = 1.2.0
[ 4129.620] ABI class: X.Org Server Extension, version 6.0
[ 4129.620] (II) Loading extension DRI2
[ 4129.620] (II) LoadModule: "fglrx"
[ 4129.620] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 4129.633] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 4129.633] compiled for 1.4.99.906, module version = 8.95.3
[ 4129.633] Module class: X.Org Video Driver
[ 4129.634] (II) Loading sub module "fglrxdrm"
[ 4129.634] (II) LoadModule: "fglrxdrm"
[ 4129.634] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 4129.634] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 4129.634] compiled for 1.4.99.906, module version = 8.95.3
[ 4129.634] (II) ATI Proprietary Linux Driver Version Identifier:8.95.3
[ 4129.634] (II) ATI Proprietary Linux Driver Release Identifier: 8.95
[ 4129.634] (II) ATI Proprietary Linux Driver Build Date: Feb 14 2012 21:05:02
[ 4129.634] (--) using VT number 7
[ 4129.635] (WW) Falling back to old probe method for fglrx
[ 4129.641] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 4129.642] (--) Assigning device section with no busID to primary device
[ 4129.642] (--) Chipset Supported AMD Graphics Processor (0x9710) found
[ 4129.642] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 4129.642] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 4129.642] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 4129.642] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 4129.642] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 4129.642] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 4129.642] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 4129.642] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 4129.642] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 4129.642] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 4129.642] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 4129.642] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 4129.642] (II) AMD Video driver is signed
[ 4129.642] (II) fglrx(0): pEnt->device->identifier=0xf52090
[ 4129.642] (II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
[ 4129.643]
[ 4129.643] Backtrace:
[ 4129.643] 0: /usr/bin/X (xorg_backtrace+0x34) [0x567da4]
[ 4129.643] 1: /usr/bin/X (0x400000+0x16b8b9) [0x56b8b9]
[ 4129.643] 2: /lib/libpthread.so.0 (0x7f23c8da0000+0xf270) [0x7f23c8daf270]
[ 4129.643] 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs111_atiddxLeaveVT+0x45) [0x7f23c5588715]
[ 4129.643] 4: /usr/bin/X (xf86DeleteScreen+0x7c) [0x47ac4c]
[ 4129.643] 5: /usr/bin/X (InitOutput+0xdca) [0x473b5a]
[ 4129.643] 6: /usr/bin/X (0x400000+0x22c0d) [0x422c0d]
[ 4129.643] 7: /lib/libc.so.6 (__libc_start_main+0xed) [0x7f23c7c5638d]
[ 4129.643] 8: /usr/bin/X (0x400000+0x230cd) [0x4230cd]
[ 4129.643]
[ 4129.643] Segmentation fault at address 0x10
[ 4129.643]
Fatal server error:
[ 4129.643] Caught signal 11 (Segmentation fault). Server aborting
[ 4129.643]
[ 4129.643]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4129.643] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4129.643]
[ 4129.644] Server terminated with error (1). Closing log file.
/etc/rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK="localtime"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
LOCALE=
DAEMON_LOCALE="yes"
USECOLOR="yes"
# HARDWARE
MODULES=(fglrx)
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME=zeus
interface=wlan0
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
# DAEMONS
DAEMONS=(syslog-ng dbus !network crond !alsa @wicd)
/etc/X11/xorg.conf (as generated by aticonfig):
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
And last but not least, /etc/X11/xorg.conf.d/10-monitor.conf:
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Device0"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1920x1080_60.00"
EndSubSection
EndSection

Did you read the Wiki entry?
You use xorg 1.12, fglrx does not support it (yet). In the wiki there is a link to an extra repo with an old xorg version. And you better use directly the catalyst repo mentioned there instead of... yeah whatever you are doing now (suspecting you are not using it). It will handle all the dependencies for you.
Good luck
matse
Last edited by matse (2012-03-27 16:00:17)

Fresh Install: Gnome Shell segfault and bgrt invalid status (Nvidia)

Hi everyone! I have Arch freshly installed, and after some modprobing last night I was finally able to get the Arch repository Nvidia drivers working. That being said, I am still getting a "bgrt invalid status" message on boot up (and, for what it is worth I do not have an Arch splash screen). I have googled the issue which took me to a thread here on the Arch forums, but that was dealing with the Noveau driver and not Nvidia.
Below is my entire dmesg output, and would appreciate if someone might help me look through it and diagnose the Gnome segfault and any other issues that may be present. I am also looking for some advice as to the proprietary Nvidia drivers. I have a GTX 980, and while currently I don't need any advanced rendering, here when an upcoming game gets released on Steam, I very well may need that.
dmesg output [main concern near bottom at entry 2.875973]:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d00bbf3b-182d-4b7f-9502-23eff99f42e5 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d08dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d08e000-0x000000009d094fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009d095000-0x000000009d4f4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d4f5000-0x000000009d964fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d965000-0x00000000bd92bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd92c000-0x00000000bdc97fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdc98000-0x00000000bdcb5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdcb6000-0x00000000be1defff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be1df000-0x00000000bef51fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bef52000-0x00000000beffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xbdc9e000 ACPI=0xbdc9e000 SMBIOS=0xf04d0 MPS=0xfd5d0
[ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000008000-0x0000000000048000) (0MB)
[ 0.000000] efi: mem02: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000000048000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000005f000) (0MB)
[ 0.000000] efi: mem05: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000000005f000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem06: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem07: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f3e000) (14MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f3e000-0x000000003795c000) (874MB)
[ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000003795c000-0x0000000037ca6000) (3MB)
[ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000037ca6000-0x0000000070a60000) (909MB)
[ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000070a60000-0x0000000099a88000) (656MB)
[ 0.000000] efi: mem13: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099a88000-0x000000009c090000) (38MB)
[ 0.000000] efi: mem14: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c090000-0x000000009c094000) (0MB)
[ 0.000000] efi: mem15: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000009c094000-0x000000009c0b1000) (0MB)
[ 0.000000] efi: mem16: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0b1000-0x000000009c0b2000) (0MB)
[ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0b2000-0x000000009c0b3000) (0MB)
[ 0.000000] efi: mem18: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0b3000-0x000000009c0b7000) (0MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0b7000-0x000000009c0b9000) (0MB)
[ 0.000000] efi: mem20: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0b9000-0x000000009c0ba000) (0MB)
[ 0.000000] efi: mem21: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0ba000-0x000000009c0bb000) (0MB)
[ 0.000000] efi: mem22: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0bb000-0x000000009c0bd000) (0MB)
[ 0.000000] efi: mem23: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0bd000-0x000000009c0be000) (0MB)
[ 0.000000] efi: mem24: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0be000-0x000000009c0c2000) (0MB)
[ 0.000000] efi: mem25: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0c2000-0x000000009c0c4000) (0MB)
[ 0.000000] efi: mem26: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0c4000-0x000000009c0c5000) (0MB)
[ 0.000000] efi: mem27: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0c5000-0x000000009c0c6000) (0MB)
[ 0.000000] efi: mem28: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0c6000-0x000000009c0e2000) (0MB)
[ 0.000000] efi: mem29: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0e2000-0x000000009c0e3000) (0MB)
[ 0.000000] efi: mem30: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0e3000-0x000000009c0e4000) (0MB)
[ 0.000000] efi: mem31: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0e4000-0x000000009c0e5000) (0MB)
[ 0.000000] efi: mem32: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0e5000-0x000000009c0e7000) (0MB)
[ 0.000000] efi: mem33: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0e7000-0x000000009c0e8000) (0MB)
[ 0.000000] efi: mem34: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0e8000-0x000000009c0f0000) (0MB)
[ 0.000000] efi: mem35: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0f0000-0x000000009c0f4000) (0MB)
[ 0.000000] efi: mem36: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0f4000-0x000000009c114000) (0MB)
[ 0.000000] efi: mem37: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c114000-0x000000009c115000) (0MB)
[ 0.000000] efi: mem38: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c115000-0x000000009c116000) (0MB)
[ 0.000000] efi: mem39: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c116000-0x000000009c117000) (0MB)
[ 0.000000] efi: mem40: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c117000-0x000000009c118000) (0MB)
[ 0.000000] efi: mem41: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c118000-0x000000009c119000) (0MB)
[ 0.000000] efi: mem42: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c119000-0x000000009c126000) (0MB)
[ 0.000000] efi: mem43: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c126000-0x000000009c128000) (0MB)
[ 0.000000] efi: mem44: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c128000-0x000000009c129000) (0MB)
[ 0.000000] efi: mem45: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c129000-0x000000009c12b000) (0MB)
[ 0.000000] efi: mem46: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c12b000-0x000000009c12e000) (0MB)
[ 0.000000] efi: mem47: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c12e000-0x000000009c130000) (0MB)
[ 0.000000] efi: mem48: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c130000-0x000000009c132000) (0MB)
[ 0.000000] efi: mem49: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c132000-0x000000009c135000) (0MB)
[ 0.000000] efi: mem50: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c135000-0x000000009c138000) (0MB)
[ 0.000000] efi: mem51: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c138000-0x000000009c13e000) (0MB)
[ 0.000000] efi: mem52: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c13e000-0x000000009c141000) (0MB)
[ 0.000000] efi: mem53: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c141000-0x000000009c142000) (0MB)
[ 0.000000] efi: mem54: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c142000-0x000000009c143000) (0MB)
[ 0.000000] efi: mem55: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c143000-0x000000009c146000) (0MB)
[ 0.000000] efi: mem56: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c146000-0x000000009c148000) (0MB)
[ 0.000000] efi: mem57: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c148000-0x000000009c149000) (0MB)
[ 0.000000] efi: mem58: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c149000-0x000000009c14a000) (0MB)
[ 0.000000] efi: mem59: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c14a000-0x000000009c14d000) (0MB)
[ 0.000000] efi: mem60: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c14d000-0x000000009cb1b000) (9MB)
[ 0.000000] efi: mem61: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb1b000-0x000000009cb1d000) (0MB)
[ 0.000000] efi: mem62: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb1d000-0x000000009cb1e000) (0MB)
[ 0.000000] efi: mem63: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb1e000-0x000000009cb1f000) (0MB)
[ 0.000000] efi: mem64: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb1f000-0x000000009cb23000) (0MB)
[ 0.000000] efi: mem65: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb23000-0x000000009cb27000) (0MB)
[ 0.000000] efi: mem66: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb27000-0x000000009cb28000) (0MB)
[ 0.000000] efi: mem67: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb28000-0x000000009cb2b000) (0MB)
[ 0.000000] efi: mem68: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb2b000-0x000000009cb4e000) (0MB)
[ 0.000000] efi: mem69: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb4e000-0x000000009cb52000) (0MB)
[ 0.000000] efi: mem70: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb52000-0x000000009cb53000) (0MB)
[ 0.000000] efi: mem71: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb53000-0x000000009cb59000) (0MB)
[ 0.000000] efi: mem72: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb59000-0x000000009d08e000) (5MB)
[ 0.000000] efi: mem73: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009d08e000-0x000000009d095000) (0MB)
[ 0.000000] efi: mem74: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d095000-0x000000009d1f6000) (1MB)
[ 0.000000] efi: mem75: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009d1f6000-0x000000009d4ba000) (2MB)
[ 0.000000] efi: mem76: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d4ba000-0x000000009d4bf000) (0MB)
[ 0.000000] efi: mem77: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009d4bf000-0x000000009d4c3000) (0MB)
[ 0.000000] efi: mem78: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d4c3000-0x000000009d4d8000) (0MB)
[ 0.000000] efi: mem79: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009d4d8000-0x000000009d4ea000) (0MB)
[ 0.000000] efi: mem80: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d4ea000-0x000000009d4f5000) (0MB)
[ 0.000000] efi: mem81: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009d4f5000-0x000000009d965000) (4MB)
[ 0.000000] efi: mem82: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d965000-0x000000009d978000) (0MB)
[ 0.000000] efi: mem83: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009d978000-0x000000009d97c000) (0MB)
[ 0.000000] efi: mem84: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009d97c000-0x000000009d97d000) (0MB)
[ 0.000000] efi: mem85: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009d97d000-0x000000009d982000) (0MB)
[ 0.000000] efi: mem86: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009d982000-0x000000009d983000) (0MB)
[ 0.000000] efi: mem87: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009d983000-0x000000009d987000) (0MB)
[ 0.000000] efi: mem88: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009d987000-0x00000000a4a2a000) (112MB)
[ 0.000000] efi: mem89: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a2a000-0x00000000a4a2d000) (0MB)
[ 0.000000] efi: mem90: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a2d000-0x00000000a4a2e000) (0MB)
[ 0.000000] efi: mem91: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a2e000-0x00000000a4a30000) (0MB)
[ 0.000000] efi: mem92: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a30000-0x00000000a4a31000) (0MB)
[ 0.000000] efi: mem93: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a31000-0x00000000a4a32000) (0MB)
[ 0.000000] efi: mem94: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a32000-0x00000000a4a38000) (0MB)
[ 0.000000] efi: mem95: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a38000-0x00000000a4a39000) (0MB)
[ 0.000000] efi: mem96: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a39000-0x00000000a4a45000) (0MB)
[ 0.000000] efi: mem97: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a45000-0x00000000a4a46000) (0MB)
[ 0.000000] efi: mem98: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a46000-0x00000000a4a6a000) (0MB)
[ 0.000000] efi: mem99: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a6a000-0x00000000a4a6b000) (0MB)
[ 0.000000] efi: mem100: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a6b000-0x00000000a4a77000) (0MB)
[ 0.000000] efi: mem101: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a77000-0x00000000a4a78000) (0MB)
[ 0.000000] efi: mem102: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a78000-0x00000000a4a9c000) (0MB)
[ 0.000000] efi: mem103: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a9c000-0x00000000a4a9d000) (0MB)
[ 0.000000] efi: mem104: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a9d000-0x00000000a4aa9000) (0MB)
[ 0.000000] efi: mem105: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4aa9000-0x00000000a4aaa000) (0MB)
[ 0.000000] efi: mem106: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4aaa000-0x00000000a4b29000) (0MB)
[ 0.000000] efi: mem107: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4b29000-0x00000000a4b2a000) (0MB)
[ 0.000000] efi: mem108: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4b2a000-0x00000000a4c4c000) (1MB)
[ 0.000000] efi: mem109: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4c4c000-0x00000000a5238000) (5MB)
[ 0.000000] efi: mem110: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5238000-0x00000000a5239000) (0MB)
[ 0.000000] efi: mem111: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5239000-0x00000000a523b000) (0MB)
[ 0.000000] efi: mem112: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a523b000-0x00000000a523c000) (0MB)
[ 0.000000] efi: mem113: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a523c000-0x00000000a523d000) (0MB)
[ 0.000000] efi: mem114: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a523d000-0x00000000a524a000) (0MB)
[ 0.000000] efi: mem115: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a524a000-0x00000000a524d000) (0MB)
[ 0.000000] efi: mem116: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a524d000-0x00000000a524e000) (0MB)
[ 0.000000] efi: mem117: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a524e000-0x00000000a5250000) (0MB)
[ 0.000000] efi: mem118: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5250000-0x00000000a5289000) (0MB)
[ 0.000000] efi: mem119: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5289000-0x00000000a528a000) (0MB)
[ 0.000000] efi: mem120: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a528a000-0x00000000a52ef000) (0MB)
[ 0.000000] efi: mem121: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a52ef000-0x00000000a52f0000) (0MB)
[ 0.000000] efi: mem122: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a52f0000-0x00000000a5334000) (0MB)
[ 0.000000] efi: mem123: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5334000-0x00000000a593e000) (6MB)
[ 0.000000] efi: mem124: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a593e000-0x00000000a594b000) (0MB)
[ 0.000000] efi: mem125: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a594b000-0x00000000a594c000) (0MB)
[ 0.000000] efi: mem126: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a594c000-0x00000000a594d000) (0MB)
[ 0.000000] efi: mem127: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a594d000-0x00000000a595d000) (0MB)
[ 0.000000] efi: mem128: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a595d000-0x00000000a5b5c000) (1MB)
[ 0.000000] efi: mem129: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5b5c000-0x00000000a5b78000) (0MB)
[ 0.000000] efi: mem130: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5b78000-0x00000000a5c47000) (0MB)
[ 0.000000] efi: mem131: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5c47000-0x00000000a5c49000) (0MB)
[ 0.000000] efi: mem132: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5c49000-0x00000000a5c68000) (0MB)
[ 0.000000] efi: mem133: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5c68000-0x00000000a5c71000) (0MB)
[ 0.000000] efi: mem134: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5c71000-0x00000000a5e1e000) (1MB)
[ 0.000000] efi: mem135: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5e1e000-0x00000000a6149000) (3MB)
[ 0.000000] efi: mem136: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6149000-0x00000000a6168000) (0MB)
[ 0.000000] efi: mem137: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a6168000-0x00000000a6263000) (0MB)
[ 0.000000] efi: mem138: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6263000-0x00000000a626c000) (0MB)
[ 0.000000] efi: mem139: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a626c000-0x00000000a65d6000) (3MB)
[ 0.000000] efi: mem140: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a65d6000-0x00000000a65d8000) (0MB)
[ 0.000000] efi: mem141: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a65d8000-0x00000000a6b1e000) (5MB)
[ 0.000000] efi: mem142: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6b1e000-0x00000000a6b20000) (0MB)
[ 0.000000] efi: mem143: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a6b20000-0x00000000a6b26000) (0MB)
[ 0.000000] efi: mem144: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6b26000-0x00000000a6b28000) (0MB)
[ 0.000000] efi: mem145: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a6b28000-0x00000000a711a000) (5MB)
[ 0.000000] efi: mem146: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a711a000-0x00000000a711c000) (0MB)
[ 0.000000] efi: mem147: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a711c000-0x00000000a853f000) (20MB)
[ 0.000000] efi: mem148: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a853f000-0x00000000a8547000) (0MB)
[ 0.000000] efi: mem149: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8547000-0x00000000a854e000) (0MB)
[ 0.000000] efi: mem150: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a854e000-0x00000000a8556000) (0MB)
[ 0.000000] efi: mem151: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8556000-0x00000000a855c000) (0MB)
[ 0.000000] efi: mem152: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a855c000-0x00000000a8564000) (0MB)
[ 0.000000] efi: mem153: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8564000-0x00000000a8568000) (0MB)
[ 0.000000] efi: mem154: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8568000-0x00000000a8570000) (0MB)
[ 0.000000] efi: mem155: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8570000-0x00000000a8578000) (0MB)
[ 0.000000] efi: mem156: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8578000-0x00000000a8586000) (0MB)
[ 0.000000] efi: mem157: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8586000-0x00000000a8592000) (0MB)
[ 0.000000] efi: mem158: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8592000-0x00000000a8597000) (0MB)
[ 0.000000] efi: mem159: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8597000-0x00000000a859c000) (0MB)
[ 0.000000] efi: mem160: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a859c000-0x00000000a85a3000) (0MB)
[ 0.000000] efi: mem161: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85a3000-0x00000000a85aa000) (0MB)
[ 0.000000] efi: mem162: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85aa000-0x00000000a85b1000) (0MB)
[ 0.000000] efi: mem163: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85b1000-0x00000000a85b5000) (0MB)
[ 0.000000] efi: mem164: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85b5000-0x00000000a85bd000) (0MB)
[ 0.000000] efi: mem165: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85bd000-0x00000000a85bf000) (0MB)
[ 0.000000] efi: mem166: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85bf000-0x00000000a85c3000) (0MB)
[ 0.000000] efi: mem167: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85c3000-0x00000000a85ca000) (0MB)
[ 0.000000] efi: mem168: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85ca000-0x00000000a85d2000) (0MB)
[ 0.000000] efi: mem169: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85d2000-0x00000000a85d9000) (0MB)
[ 0.000000] efi: mem170: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85d9000-0x00000000a85e4000) (0MB)
[ 0.000000] efi: mem171: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85e4000-0x00000000a85e9000) (0MB)
[ 0.000000] efi: mem172: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85e9000-0x00000000a85ee000) (0MB)
[ 0.000000] efi: mem173: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85ee000-0x00000000a85f6000) (0MB)
[ 0.000000] efi: mem174: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85f6000-0x00000000a85fc000) (0MB)
[ 0.000000] efi: mem175: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85fc000-0x00000000a8604000) (0MB)
[ 0.000000] efi: mem176: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8604000-0x00000000a8608000) (0MB)
[ 0.000000] efi: mem177: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8608000-0x00000000a860a000) (0MB)
[ 0.000000] efi: mem178: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a860a000-0x00000000a860d000) (0MB)
[ 0.000000] efi: mem179: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a860d000-0x00000000a8612000) (0MB)
[ 0.000000] efi: mem180: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8612000-0x00000000a861c000) (0MB)
[ 0.000000] efi: mem181: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a861c000-0x00000000a86f7000) (0MB)
[ 0.000000] efi: mem182: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a86f7000-0x00000000a86fb000) (0MB)
[ 0.000000] efi: mem183: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a86fb000-0x00000000a873e000) (0MB)
[ 0.000000] efi: mem184: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a873e000-0x00000000a8740000) (0MB)
[ 0.000000] efi: mem185: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8740000-0x00000000a879c000) (0MB)
[ 0.000000] efi: mem186: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a879c000-0x00000000a879e000) (0MB)
[ 0.000000] efi: mem187: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a879e000-0x00000000a87a0000) (0MB)
[ 0.000000] efi: mem188: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a87a0000-0x00000000a87a2000) (0MB)
[ 0.000000] efi: mem189: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a87a2000-0x00000000a880e000) (0MB)
[ 0.000000] efi: mem190: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a880e000-0x00000000a881e000) (0MB)
[ 0.000000] efi: mem191: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a881e000-0x00000000a8823000) (0MB)
[ 0.000000] efi: mem192: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8823000-0x00000000a8835000) (0MB)
[ 0.000000] efi: mem193: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8835000-0x00000000a883e000) (0MB)
[ 0.000000] efi: mem194: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a883e000-0x00000000a8841000) (0MB)
[ 0.000000] efi: mem195: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8841000-0x00000000a8842000) (0MB)
[ 0.000000] efi: mem196: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8842000-0x00000000a887e000) (0MB)
[ 0.000000] efi: mem197: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a887e000-0x00000000a8883000) (0MB)
[ 0.000000] efi: mem198: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8883000-0x00000000a8884000) (0MB)
[ 0.000000] efi: mem199: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8884000-0x00000000a88d6000) (0MB)
[ 0.000000] efi: mem200: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a88d6000-0x00000000a8926000) (0MB)
[ 0.000000] efi: mem201: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8926000-0x00000000a892a000) (0MB)
[ 0.000000] efi: mem202: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a892a000-0x00000000a8948000) (0MB)
[ 0.000000] efi: mem203: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8948000-0x00000000a89ef000) (0MB)
[ 0.000000] efi: mem204: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a89ef000-0x00000000a8a1a000) (0MB)
[ 0.000000] efi: mem205: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8a1a000-0x00000000a8bca000) (1MB)
[ 0.000000] efi: mem206: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8bca000-0x00000000a8bdc000) (0MB)
[ 0.000000] efi: mem207: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8bdc000-0x00000000a8be0000) (0MB)
[ 0.000000] efi: mem208: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8be0000-0x00000000a8be7000) (0MB)
[ 0.000000] efi: mem209: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8be7000-0x00000000a8bea000) (0MB)
[ 0.000000] efi: mem210: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8bea000-0x00000000a8bfc000) (0MB)
[ 0.000000] efi: mem211: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8bfc000-0x00000000a8d7f000) (1MB)
[ 0.000000] efi: mem212: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8d7f000-0x00000000a8daa000) (0MB)
[ 0.000000] efi: mem213: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8daa000-0x00000000a8dc5000) (0MB)
[ 0.000000] efi: mem214: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8dc5000-0x00000000a8dd0000) (0MB)
[ 0.000000] efi: mem215: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8dd0000-0x00000000a8dfd000) (0MB)
[ 0.000000] efi: mem216: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8dfd000-0x00000000a8dfe000) (0MB)
[ 0.000000] efi: mem217: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8dfe000-0x00000000a8dff000) (0MB)
[ 0.000000] efi: mem218: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8dff000-0x00000000a8e08000) (0MB)
[ 0.000000] efi: mem219: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8e08000-0x00000000a90d8000) (2MB)
[ 0.000000] efi: mem220: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a90d8000-0x00000000a90d9000) (0MB)
[ 0.000000] efi: mem221: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a90d9000-0x00000000a94f9000) (4MB)
[ 0.000000] efi: mem222: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a94f9000-0x00000000a94fb000) (0MB)
[ 0.000000] efi: mem223: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a94fb000-0x00000000aa9e9000) (20MB)
[ 0.000000] efi: mem224: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aa9e9000-0x00000000aa9eb000) (0MB)
[ 0.000000] efi: mem225: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aa9eb000-0x00000000adb6d000) (49MB)
[ 0.000000] efi: mem226: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000adb6d000-0x00000000adb6f000) (0MB)
[ 0.000000] efi: mem227: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000adb6f000-0x00000000ae74b000) (11MB)
[ 0.000000] efi: mem228: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ae74b000-0x00000000ae74d000) (0MB)
[ 0.000000] efi: mem229: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ae74d000-0x00000000ae752000) (0MB)
[ 0.000000] efi: mem230: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ae752000-0x00000000ae754000) (0MB)
[ 0.000000] efi: mem231: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ae754000-0x00000000ae86e000) (1MB)
[ 0.000000] efi: mem232: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ae86e000-0x00000000ae872000) (0MB)
[ 0.000000] efi: mem233: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ae872000-0x00000000ae878000) (0MB)
[ 0.000000] efi: mem234: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ae878000-0x00000000ae87a000) (0MB)
[ 0.000000] efi: mem235: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ae87a000-0x00000000aeafa000) (2MB)
[ 0.000000] efi: mem236: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aeafa000-0x00000000aeafc000) (0MB)
[ 0.000000] efi: mem237: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aeafc000-0x00000000aeb16000) (0MB)
[ 0.000000] efi: mem238: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aeb16000-0x00000000aeb18000) (0MB)
[ 0.000000] efi: mem239: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aeb18000-0x00000000af538000) (10MB)
[ 0.000000] efi: mem240: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000af538000-0x00000000af564000) (0MB)
[ 0.000000] efi: mem241: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000af564000-0x00000000af5fe000) (0MB)
[ 0.000000] efi: mem242: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000af5fe000-0x00000000af64e000) (0MB)
[ 0.000000] efi: mem243: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000af64e000-0x00000000af7a2000) (1MB)
[ 0.000000] efi: mem244: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000af7a2000-0x00000000af7aa000) (0MB)
[ 0.000000] efi: mem245: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000af7aa000-0x00000000af86e000) (0MB)
[ 0.000000] efi: mem246: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000af86e000-0x00000000af892000) (0MB)
[ 0.000000] efi: mem247: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000af892000-0x00000000afa7e000) (1MB)
[ 0.000000] efi: mem248: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afa7e000-0x00000000afaa1000) (0MB)
[ 0.000000] efi: mem249: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afaa1000-0x00000000afae3000) (0MB)
[ 0.000000] efi: mem250: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afae3000-0x00000000afb00000) (0MB)
[ 0.000000] efi: mem251: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afb00000-0x00000000afea4000) (3MB)
[ 0.000000] efi: mem252: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afea4000-0x00000000afebc000) (0MB)
[ 0.000000] efi: mem253: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afebc000-0x00000000aff04000) (0MB)
[ 0.000000] efi: mem254: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aff04000-0x00000000aff0e000) (0MB)
[ 0.000000] efi: mem255: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aff0e000-0x00000000b00a3000) (1MB)
[ 0.000000] efi: mem256: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b00a3000-0x00000000b00a9000) (0MB)
[ 0.000000] efi: mem257: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b00a9000-0x00000000b0123000) (0MB)
[ 0.000000] efi: mem258: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0123000-0x00000000b012a000) (0MB)
[ 0.000000] efi: mem259: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b012a000-0x00000000b0176000) (0MB)
[ 0.000000] efi: mem260: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0176000-0x00000000b0199000) (0MB)
[ 0.000000] efi: mem261: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0199000-0x00000000b02b6000) (1MB)
[ 0.000000] efi: mem262: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b02b6000-0x00000000b02e3000) (0MB)
[ 0.000000] efi: mem263: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b02e3000-0x00000000b0426000) (1MB)
[ 0.000000] efi: mem264: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0426000-0x00000000b0443000) (0MB)
[ 0.000000] efi: mem265: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0443000-0x00000000b0645000) (2MB)
[ 0.000000] efi: mem266: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0645000-0x00000000b0662000) (0MB)
[ 0.000000] efi: mem267: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0662000-0x00000000b07a0000) (1MB)
[ 0.000000] efi: mem268: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b07a0000-0x00000000b07a6000) (0MB)
[ 0.000000] efi: mem269: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b07a6000-0x00000000b08d9000) (1MB)
[ 0.000000] efi: mem270: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b08d9000-0x00000000b08e4000) (0MB)
[ 0.000000] efi: mem271: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b08e4000-0x00000000b0a30000) (1MB)
[ 0.000000] efi: mem272: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0a30000-0x00000000b0a3e000) (0MB)
[ 0.000000] efi: mem273: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0a3e000-0x00000000b0a91000) (0MB)
[ 0.000000] efi: mem274: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0a91000-0x00000000b0a94000) (0MB)
[ 0.000000] efi: mem275: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0a94000-0x00000000b0bf3000) (1MB)
[ 0.000000] efi: mem276: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0bf3000-0x00000000b0bf7000) (0MB)
[ 0.000000] efi: mem277: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0bf7000-0x00000000b0c55000) (0MB)
[ 0.000000] efi: mem278: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0c55000-0x00000000b0c56000) (0MB)
[ 0.000000] efi: mem279: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0c56000-0x00000000b0d46000) (0MB)
[ 0.000000] efi: mem280: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0d46000-0x00000000b0d50000) (0MB)
[ 0.000000] efi: mem281: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0d50000-0x00000000b0da2000) (0MB)
[ 0.000000] efi: mem282: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0da2000-0x00000000b0daf000) (0MB)
[ 0.000000] efi: mem283: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0daf000-0x00000000b0dd7000) (0MB)
[ 0.000000] efi: mem284: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0dd7000-0x00000000b0ddf000) (0MB)
[ 0.000000] efi: mem285: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0ddf000-0x00000000b0de4000) (0MB)
[ 0.000000] efi: mem286: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0de4000-0x00000000b0de8000) (0MB)
[ 0.000000] efi: mem287: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0de8000-0x00000000b0ea0000) (0MB)
[ 0.000000] efi: mem288: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0ea0000-0x00000000b0ea5000) (0MB)
[ 0.000000] efi: mem289: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0ea5000-0x00000000b0f50000) (0MB)
[ 0.000000] efi: mem290: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0f50000-0x00000000b0f56000) (0MB)
[ 0.000000] efi: mem291: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0f56000-0x00000000b0f91000) (0MB)
[ 0.000000] efi: mem292: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0f91000-0x00000000b0f9e000) (0MB)
[ 0.000000] efi: mem293: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0f9e000-0x00000000b0fd1000) (0MB)
[ 0.000000] efi: mem294: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0fd1000-0x00000000b0fde000) (0MB)
[ 0.000000] efi: mem295: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0fde000-0x00000000b1080000) (0MB)
[ 0.000000] efi: mem296: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1080000-0x00000000b1087000) (0MB)
[ 0.000000] efi: mem297: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1087000-0x00000000b1146000) (0MB)
[ 0.000000] efi: mem298: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1146000-0x00000000b1154000) (0MB)
[ 0.000000] efi: mem299: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1154000-0x00000000b116f000) (0MB)
[ 0.000000] efi: mem300: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b116f000-0x00000000b1176000) (0MB)
[ 0.000000] efi: mem301: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1176000-0x00000000b11a5000) (0MB)
[ 0.000000] efi: mem302: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b11a5000-0x00000000b11ab000) (0MB)
[ 0.000000] efi: mem303: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b11ab000-0x00000000b1231000) (0MB)
[ 0.000000] efi: mem304: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1231000-0x00000000b1236000) (0MB)
[ 0.000000] efi: mem305: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1236000-0x00000000b1271000) (0MB)
[ 0.000000] efi: mem306: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1271000-0x00000000b127e000) (0MB)
[ 0.000000] efi: mem307: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b127e000-0x00000000b1304000) (0MB)
[ 0.000000] efi: mem308: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1304000-0x00000000b1308000) (0MB)
[ 0.000000] efi: mem309: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1308000-0x00000000b142c000) (1MB)
[ 0.000000] efi: mem310: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b142c000-0x00000000b142f000) (0MB)
[ 0.000000] efi: mem311: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b142f000-0x00000000b151c000) (0MB)
[ 0.000000] efi: mem312: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b151c000-0x00000000b1525000) (0MB)
[ 0.000000] efi: mem313: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1525000-0x00000000b153c000) (0MB)
[ 0.000000] efi: mem314: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b153c000-0x00000000b1544000) (0MB)
[ 0.000000] efi: mem315: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1544000-0x00000000b155b000) (0MB)
[ 0.000000] efi: mem316: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b155b000-0x00000000b1560000) (0MB)
[ 0.000000] efi: mem317: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1560000-0x00000000b198d000) (4MB)
[ 0.000000] efi: mem318: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b198d000-0x00000000b1999000) (0MB)
[ 0.000000] efi: mem319: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1999000-0x00000000b19a2000) (0MB)
[ 0.000000] efi: mem320: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b19a2000-0x00000000b19a5000) (0MB)
[ 0.000000] efi: mem321: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b19a5000-0x00000000b19a8000) (0MB)
[ 0.000000] efi: mem322: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b19a8000-0x00000000b19a9000) (0MB)
[ 0.000000] efi: mem323: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b19a9000-0x00000000b19fa000) (0MB)
[ 0.000000] efi: mem324: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b19fa000-0x00000000b19fb000) (0MB)
[ 0.000000] efi: mem325: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b19fb000-0x00000000b1a37000) (0MB)
[ 0.000000] efi: mem326: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1a37000-0x00000000b1a38000) (0MB)
[ 0.000000] efi: mem327: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1a38000-0x00000000b1aa1000) (0MB)
[ 0.000000] efi: mem328: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1aa1000-0x00000000b1aad000) (0MB)
[ 0.000000] efi: mem329: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1aad000-0x00000000b1acd000) (0MB)
[ 0.000000] efi: mem330: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1acd000-0x00000000b1ace000) (0MB)
[ 0.000000] efi: mem331: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1ace000-0x00000000b1af3000) (0MB)
[ 0.000000] efi: mem332: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1af3000-0x00000000b1af4000) (0MB)
[ 0.000000] efi: mem333: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1af4000-0x00000000bb91e000) (158MB)
[ 0.000000] efi: mem334: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb91e000-0x00000000bb920000) (0MB)
[ 0.000000] efi: mem335: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb920000-0x00000000bcf8f000) (22MB)
[ 0.000000] efi: mem336: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bcf8f000-0x00000000bd052000) (0MB)
[ 0.000000] efi: mem337: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000bd052000-0x00000000bd061000) (0MB)
[ 0.000000] efi: mem338: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bd061000-0x00000000bd92c000) (8MB)
[ 0.000000] efi: mem339: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000bd92c000-0x00000000bd9df000) (0MB)
[ 0.000000] efi: mem340: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000bd9df000-0x00000000bdc98000) (2MB)
[ 0.000000] efi: mem341: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bdc98000-0x00000000bdc9e000) (0MB)
[ 0.000000] efi: mem342: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bdc9e000-0x00000000bdcb6000) (0MB)
[ 0.000000] efi: mem343: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bdcb6000-0x00000000bddbe000) (1MB)
[ 0.000000] efi: mem344: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bddbe000-0x00000000be1df000) (4MB)
[ 0.000000] efi: mem345: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000be1df000-0x00000000be538000) (3MB)
[ 0.000000] efi: mem346: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000be538000-0x00000000bee39000) (9MB)
[ 0.000000] efi: mem347: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bee39000-0x00000000bee3b000) (0MB)
[ 0.000000] efi: mem348: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bee3b000-0x00000000beeb1000) (0MB)
[ 0.000000] efi: mem349: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beeb1000-0x00000000beeb4000) (0MB)
[ 0.000000] efi: mem350: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beeb4000-0x00000000bef52000) (0MB)
[ 0.000000] efi: mem351: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bef52000-0x00000000bef74000) (0MB)
[ 0.000000] efi: mem352: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bef74000-0x00000000befff000) (0MB)
[ 0.000000] efi: mem353: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000befff000-0x00000000bf000000) (0MB)
[ 0.000000] efi: mem354: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000083f000000) (29680MB)
[ 0.000000] efi: mem355: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem356: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem357: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem358: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem359: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem360: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUS All Series/Z97-PRO, BIOS 2012 09/30/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x83f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DBFFF write-protect
[ 0.000000] DC000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 0800000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0820000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 0830000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 0838000000 mask 7FFC000000 write-back
[ 0.000000] 5 base 083C000000 mask 7FFE000000 write-back
[ 0.000000] 6 base 083E000000 mask 7FFF000000 write-back
[ 0.000000] 7 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd8d0-0x000fd8df] mapped at [ffff8800000fd8d0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x83ee00000-0x83effffff]
[ 0.000000] [mem 0x83ee00000-0x83effffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x820000000-0x83edfffff]
[ 0.000000] [mem 0x820000000-0x83edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x800000000-0x81fffffff]
[ 0.000000] [mem 0x800000000-0x81fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9d08dfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9cffffff] page 2M
[ 0.000000] [mem 0x9d000000-0x9d08dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9d095000-0x9d4f4fff]
[ 0.000000] [mem 0x9d095000-0x9d1fffff] page 4k
[ 0.000000] [mem 0x9d200000-0x9d3fffff] page 2M
[ 0.000000] [mem 0x9d400000-0x9d4f4fff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9d965000-0xbd92bfff]
[ 0.000000] [mem 0x9d965000-0x9d9fffff] page 4k
[ 0.000000] [mem 0x9da00000-0xbd7fffff] page 2M
[ 0.000000] [mem 0xbd800000-0xbd92bfff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff]
[ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[ 0.000000] [mem 0x100000000-0x7ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3795c000-0x37ca5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BDC9E000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BDC9E080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BDCAD510 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BDC9E198 00F372 (v02 ALASKA A M I 00000011 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000BE1DEF80 000040
[ 0.000000] ACPI: APIC 0x00000000BDCAD620 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BDCAD6B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BDCAD700 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000BDCAE380 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000BDCAE8C0 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000BDCAF438 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BDCAF478 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000BDCAF4B0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000BDCAF820 005977 (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: BGRT 0x00000000BDCB51F0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000083effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x83eff8000-0x83effbfff]
[ 0.000000] [ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081e600000-ffff88083e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x83effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00057fff]
[ 0.000000] node 0: [mem 0x00059000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x9d08dfff]
[ 0.000000] node 0: [mem 0x9d095000-0x9d4f4fff]
[ 0.000000] node 0: [mem 0x9d965000-0xbd92bfff]
[ 0.000000] node 0: [mem 0xbefff000-0xbeffffff]
[ 0.000000] node 0: [mem 0x100000000-0x83effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x83effffff]
[ 0.000000] On node 0 totalpages: 8373331
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 59 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12051 pages used for memmap
[ 0.000000] DMA32 zone: 771254 pages, LIFO batch:31
[ 0.000000] Normal zone: 118720 pages used for memmap
[ 0.000000] Normal zone: 7598080 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d08e000-0x9d094fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d4f5000-0x9d964fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd92c000-0xbdc97fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdc98000-0xbdcb5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdcb6000-0xbe1defff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe1df000-0xbef51fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbef52000-0xbeffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88083ec00000 s86336 r8192 d32448 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8242437
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d00bbf3b-182d-4b7f-9502-23eff99f42e5 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32486996K/33493324K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 1006328K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4000.001 MHz processor
[ 0.000017] Calibrating delay loop (skipped), value calculated using timer frequency.. 8003.33 BogoMIPS (lpj=13333336)
[ 0.000019] pid_max: default: 32768 minimum: 301
[ 0.000022] ACPI: Core revision 20141107
[ 0.009229] ACPI: All ACPI Tables successfully acquired
[ 0.029785] Security Framework initialized
[ 0.029788] Yama: becoming mindful.
[ 0.030858] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.034247] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.035692] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.035711] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.035889] Initializing cgroup subsys memory
[ 0.035892] Initializing cgroup subsys devices
[ 0.035893] Initializing cgroup subsys freezer
[ 0.035894] Initializing cgroup subsys net_cls
[ 0.035895] Initializing cgroup subsys blkio
[ 0.035908] CPU: Physical Processor ID: 0
[ 0.035909] CPU: Processor Core ID: 0
[ 0.035911] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.036595] mce: CPU supports 9 MCE banks
[ 0.036604] CPU0: Thermal monitoring enabled (TM1)
[ 0.036611] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.036664] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.037117] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.043080] ftrace: allocating 21171 entries in 83 pages
[ 0.048407] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.081410] smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (fam: 06, model: 3c, stepping: 03)
[ 0.081414] TSC deadline timer enabled
[ 0.081426] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.081437] ... version: 3
[ 0.081437] ... bit width: 48
[ 0.081438] ... generic registers: 4
[ 0.081438] ... value mask: 0000ffffffffffff
[ 0.081439] ... max period: 0000ffffffffffff
[ 0.081439] ... fixed-purpose events: 3
[ 0.081440] ... event mask: 000000070000000f
[ 0.101445] x86: Booting SMP configuration:
[ 0.101446] .... node #0, CPUs: #1
[ 0.115404] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.122053] #2 #3 #4 #5 #6 #7
[ 0.238414] x86: Booted up 1 node, 8 CPUs
[ 0.238416] smpboot: Total of 8 processors activated (64025.68 BogoMIPS)
[ 0.243980] devtmpfs: initialized
[ 0.246376] PM: Registering ACPI NVS region [mem 0x9d08e000-0x9d094fff] (28672 bytes)
[ 0.246377] PM: Registering ACPI NVS region [mem 0xbdcb6000-0xbe1defff] (5410816 bytes)
[ 0.246503] pinctrl core: initialized pinctrl subsystem
[ 0.246530] RTC time: 13:27:06, date: 04/16/15
[ 0.246592] NET: Registered protocol family 16
[ 0.257198] cpuidle: using governor ladder
[ 0.270535] cpuidle: using governor menu
[ 0.270549] ACPI: bus type PCI registered
[ 0.270550] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.270588] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.270589] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.270757] PCI: Using configuration type 1 for base access
[ 0.284059] ACPI: Added _OSI(Module Device)
[ 0.284060] ACPI: Added _OSI(Processor Device)
[ 0.284060] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.284061] ACPI: Add

Hey, I ran into a similar error (not bgrt invalid status, but a gnome shell segfault) after updating recently and I'm using the proprietary drivers. I think I may have had multiple issues. I'm not sure if any of this advice will prove useful, but some combination of these worked for me:
* Stop gdm with systemctl (use ctrl alt f2 or another tty), uncomment WaylandEnable=false in /etc/gdm/custom.conf and try restarting gdm
* If that doesn't work, disable gdm and install another login manager (I used sddm)
* If that still doesn't work and you have the infinality font packages for freetype, fontconfig, and cairo, replace them with the default packages and try starting your login manager again
Last edited by canurabus (2015-04-17 18:36:59)

OpenCV SEGFAULT when using imshow functions

Hello,
recently, when I run my OpenCV application on archlinux, I get a segfault when using OpenCV's imshow() functions for displaying the video output. This still worked some weeks ago and I did not change my code since then.
The error is related to GTK+ which causes the segfault after OpenCV uses the gtk_init() function.
This is the stacktrace:
#0 0x00000000006328a0 in signal ()
#1 0x00007ffff1dff264 in ?? () from /usr/lib/libgtk-x11-2.0.so.0
#2 0x00007ffff1524427 in g_option_context_parse ()
from /usr/lib/libglib-2.0.so.0
#3 0x00007ffff1dff80e in gtk_parse_args ()
from /usr/lib/libgtk-x11-2.0.so.0
#4 0x00007ffff1dff869 in gtk_init_check ()
from /usr/lib/libgtk-x11-2.0.so.0
#5 0x00007ffff1dff899 in gtk_init () from /usr/lib/libgtk-x11-2.0.so.0
#6 0x00007ffff6a1fa38 in cvInitSystem ()
from /usr/lib/libopencv_highgui.so.2.4
#7 0x00007ffff6a20163 in cvNamedWindow ()
from /usr/lib/libopencv_highgui.so.2.4
#8 0x00007ffff6a20cfd in cvShowImage ()
from /usr/lib/libopencv_highgui.so.2.4
#9 0x00007ffff6a1c7f7 in cv::imshow(std::string const&, cv::_InputArray const&) () from /usr/lib/libopencv_highgui.so.2.4
#10 0x00000000004187e0 in StereoMatrix::displayImages (this=0x7fffffffd6ff)
at /home/user/mtdev/src/StereoMatrix.cpp:51
#11 0x000000000041861a in StereoMatrix::generateStereoMat (
this=0x7fffffffd6ff, input=..., resizeMat=false)
I'm running the recent version of OpenCV from the repositories:
extra/opencv 2.4.6.1-3
Apart from that my system is also up-to-date.
Can anyone reproduce this error or has an idea what causes it?
Thanks

Hi Thanks for the response
Still beavering away at this but have made sizeable progress since this post.
First off I ma looking for solutions within CVI and not LabView but I often find that if there is a solution in Labview then there is often one in CVI so my question becomes.....does Labview allow for capture of a 10 bit image? That is my biggest stumbling block.
My solution so far involves writing a C wrapper dll for the existing C++ SDK that is supplied with these cards in Visual studio then using it within CVI.
This works but has been allot of work and as disappointed as I would be to find that there is a simpler solution I would be happy to simplify the code involved in my overall project - and also to put details of the best solution on the forums for others that may be trying to do the same thing!
Another disadvantage to the curretn method is it is a little slow - I am constantly looking at way of speeding up aquisition of the images. I have no solid numbers but I'd estimate I am working in the region fo around 10 frames a second when working with 10 bit images.
For 8 bit images the best solution I have found is to make use of the IPP library that is provided by Intel. This hasgreat functions for taking the raw data from the card and presenting it in various ways at high speed. I have written 1 application with this that pulls the informaiton in real time but only at 8 bit as unfortunately there is no 10 bit option.

GNOME shell crashes when searching

Hello everyone this is my first post
My problem is when in the GNOME shell using the search function every time I type more than 2 letters it crashes
The last thing I did was install a bunch of themes
I have a very similar problem to https://bbs.archlinux.org/viewtopic.php … 4#p1007204 I can't seem to find a solution it's a very strange problem

Not certain if you are having the same problem I was but mine was caused by running a kernel with bfq switched on, in noop or cfq mode everything runs fine for me.

Getting multiple segfaults when using Gnome3

I recently switch to Arch linux for my work computer, and decided on Gnome3 for my WM. Everything looked good however I have recently been getting very odd behavior that is hard to describe.
Gnome3 seems generally unstable, and I say that because I have been frequently been getting the "Oh No.." error which then crashes the window manager and kicks me back out to GDM. Also, the online accounts functionality gives me gnome-keyring errors when trying to remove accounts (I think this might be because I changed my password). Evolution hangs when loading my exchange account, crashes, has trouble syncing my calendar, but then magically starts working again after a restart. Just today I changed my desktop background and got an "Oh No..." error.
Trying to investigate these issues and haven't found much in the way of logs. I am used to seeing /var/log/messages but that does not exist on my system. I did however find these in dmesg:
[ 180.763980] mission-control[805]: segfault at 0 ip 00007f686f38b360 sp 00007fff071ec2e8 error 4 in libglib-2.0.so.0.3400.3[7f686f353000+f4000]
[ 278.351169] dconf worker[914]: segfault at a ip 00007f8a33bb17f2 sp 00007f8a1d5cb9a0 error 4 in libglib-2.0.so.0.3400.3[7f8a33b4f000+f4000]
[ 961.020095] evolution[2046]: segfault at 8 ip 00007fdb88d89fa8 sp 00007fff01e02d60 error 4 in libpixman-1.so.0.28.2[7fdb88d32000+91000]
[ 9174.786628] soffice.bin[3191]: segfault at 7f2aeb006182 ip 00007f2aecb67f7d sp 00007fff837271b0 error 4 in libmergedlo.so[7f2aebf15000+2d92000]
[11892.209189] mission-control[2019]: segfault at 0 ip 00007f028bae6360 sp 00007fff1f590b08 error 4 in libglib-2.0.so.0.3400.3[7f028baae000+f4000]
[13693.700127] mission-control[5266]: segfault at 0 ip 00007fd7cb0f8360 sp 00007fff7247c8f8 error 4 in libglib-2.0.so.0.3400.3[7fd7cb0c0000+f4000]
What is going on with my glib2? The frequency of segfaults and the applications involved suggest that this might be my problem. I just reinstalled it with pacman and so far so good, but the nature of this problem doesn't give me too much confidence that it is fixed!
TIA,
Trann

...so look in the Event editor (just hit E ) and see if the doubled notes are on the same or on different midi channels. If the doubles are duplicates (same length, same velocity, same channel) then you have a MIDI loop and need to set your keyboard to local off, as pointed out.
To get rid of the duplicates you already have, select all notes (⌘-A) in the editor and hit D .

Logout crashes system when using fglrx [SOLVED]

Hi guys,
I admit I'm a little annoyed about X related issues with Arch on my thinkpad T400, none of choice is working totally fine on it now. It has ATI HD3470 discrete card and Intel X4500 integrated card, I've tried all available dirvers: xf86-video-ati, xf86-video-radeonhd, catalyst(fglrx) and xf86-video-intel. Here are problem descriptions:
1, Intel X4500 + xf86-video-intel
This scheme is the best working choice at present. Everything is fine, except cannot pass 3D acceleration test in Cedega. glxinfo shows direct rendering is "yes", and openGL direct rendering test in Cedega is passed. With 3D acceleration test failed, I cannot run any games in it. Glxgears shows 420FPS with Intel X4500
2, ATI HD3470 + xf86-video-ati / xf86-video-radeonhd
Annoying! I'm not sure how well the open source driver support my card, surely they are working, but only provide very basically performance. 3D acceleration test in Cedega cannot pass either, while direct rendering is "yes" in glxinfo too! Besides this, the really annoying thing is laptop FAN is keep running with these two drivers, even CPU occupation is ZERO. Glxgears shows 370FPS with radeon or radeonhd.
3, ATI HD3470 + catalyst
This scheme provides best performance, that 3D acceleration test in Cedega can pass, and the game plays smoothly. However, this driver has a frustrated problem: It works fine when first boot up, but if I logout, then X would crash to a black screen, and both keyboard and mouse lost response. Only press power button for 3 seconds to hardly shutdown can leave the mess. More details can refer to: http://bbs.archlinux.org/viewtopic.php?id=62413
Glxgears shows 1200FPS with fglrx.
I guess a comparison is suitable here, with fglrx+ubuntu installed on this laptop, Glxgears shows 3200FPS, and it works totally fine without logging out to black screen problem either. I'm a newbie switched from Ubuntu to Arch, I love the Arch way. But I have to say, I DO NOT like the Arch's X way.
Hope someone who has the same hardware or even the same laptop can help me. Though I don't like to configure X, I like the feeling manually solve problems. Any advice or suggestion or even criticism will be highly appreciated. My xorg.conf are attached in pastebin:
xorg.conf_intel: http://pastebin.com/f49274228
xorg.conf_radeon/radeonhd: http://pastebin.com/f2493d0d9
xorg.conf_catalyst: http://pastebin.com/f3a8545f4
Best regards,
L.Y.
Last edited by leeyee (2009-01-30 09:00:46)

I reinstalled catalyst and now using fglrx driver. I reproduced the problem and paste X server log here, I hope anyone have or had this problem would come on to solve this, seems this problems is old, common and nasty all together.
My system:
Thinkpad T400
ATI Radeon HD3470
xorg-server 1.5.3-4
xorg-server-utils 7.4-2
catalyst 8.12-3
catalyst-utils 8.12-1
kernel26 2.6.28.1-1
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux thinkpad 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 18 20:17:17 UTC 2009 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 25 13:03:12 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Configured Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "ATI HD3470"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Configured Keyboard"
(**) |-->Input Device "Touchpad"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Configured Mouse
(WW) Disabling Configured Keyboard
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xd0000000/0, 0xcfff0000/0, I/O @ 0x00002000/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
Module class: X.Org Video Driver
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.56.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.561
(II) ATI Proprietary Linux Driver Build Date: Dec 1 2008 14:55:43
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(--) Chipset Supported AMD Graphics Processor (0x95C4) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x8775500
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
ABI class: X.Org Server Extension, version 1.1
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset = 0x95c4)
(--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x210e)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xcfff0000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.88
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M82
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x813017b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80d8cb1]
2: [0xb7f55400]
Fatal server error:
Caught signal 4. Server aborting
Reproduce problem as follows:
1, Install fglrx as driver for ATI 3470 on LAPTOP
2, Boot up and login gnome will succeed every time.
3, Logout:
3.1 If using GDM
Logout then it goes into a black screen, both keyboard and mouse lost response, only hard shutdown helps.
3.2 If on runlevel 3
Logout succeeds, will back into user console. Log into normal users in other consoles succeeds. If now run startx, it will generate above quoted error: "Fatal Server Error: Caught signal 4". After this, commands such as su, ps, sudo, or as root log into other consoles will cause Segment Fault, or even Kernel panic. As these situations happen, only hard shutdown helps.
I've also tried these workarounds found with google or in other forums:
1, Edit /etc/gdm/custom.conf to set X server always restart value equal 1.
Does not help. Actually, this problem might not caused by gdm, because I boot into runlevel 3 would also have this problem.
2, Edit /boot/grub/menu.lst to add "nopat" option into kernel line
Does not help, the problem remains.
3, Build catalyst 8.11 with ABS
Does not help, with catalyst-8.11 X will boot into black screen for the first time too. I'm not sure if I build it correctly, it has a 2.6.27.patch in abs, but I'm using 2.6.28 kernel.
4, Use D-sub instead of DVI
I'm on LAPTOP, don't have a choice to change to D-sub connector, so I don't know if this help.
5, Remove .Xauthority file or edit /etc/ati/authatieventsd.sh file as https://bugs.launchpad.net/ubuntu/hardy … bug/118605 suggests
Does not help either, It might not be X authority's problem. But I'm not quite sure.
Alright, I hope these details have made myself clear, because of my poor English. Hope you guys help, thanks in advance!
Last edited by leeyee (2009-01-25 06:33:35)

Segfault when using shared library

Hi,
I have a little problem. I'm using a shared library in my program. It works fine under windows, but when I run my program under linux or solaris I get a segfault.
When using the same library from a C/C++ program under soloris or linux I have no problem.
Does someone have an idea ??
Thanks.
Vincent

This is Java related ?
Windows may not be as strict about memory pointers....
Try running something like "BoundsChecker" against a debug version of your code.
Years ago I used to use that, to detect pointer problems.
You may be trying to access the contents of NULL in C/C++, or trying to read from a memory location
which is no longer valid... eg. freed memory, or you return a pointer to a local variable to a calling routine.
That stack space would be destroyed when the function returns, so you'd be trying to access memory
that is no longer "valid".
regards,
Owen

SEGFAULT when using pango-graphite

I wish to use pango-graphite (pango enabled with graphite smart rendering technology). I installed from source, following the pango-graphite and silgraphite installation instructions. However, whenever I try to run a pango app (firefox, gnome-terminal, gedit, basically anything except xterm) I get a Segmentation Fault. This persists until I deselect pango-graphite.so from /etc/pango/pango.modules.
In ubuntu I simply did apt-get install pango-graphite silgraphite and it worked.
Any suggestions would be most welcome.

This is Java related ?
Windows may not be as strict about memory pointers....
Try running something like "BoundsChecker" against a debug version of your code.
Years ago I used to use that, to detect pointer problems.
You may be trying to access the contents of NULL in C/C++, or trying to read from a memory location
which is no longer valid... eg. freed memory, or you return a pointer to a local variable to a calling routine.
That stack space would be destroyed when the function returns, so you'd be trying to access memory
that is no longer "valid".
regards,
Owen

Gnome-shell uses 100% of cpu!

Hello,
after some time, gnome-shell starts to use all of my cpu (well, one core out of 2). The navigation becomes sluggish, applications need several seconds to refresh.
How can I determine what is causing this? It is really annoying, as I have to close all my work when this occurs.

Try `strace`ing the running process. Any fd's can be looked up in /proc/$PID/fd

Gnome shell volume always back to previous setting when reboot

Hello,
I have one little bug with the volume icon in gnome shell. When I set the volume to another level. Whenever I reboot, the seeting is lost and it's back to the previous level (lower in my case).
Any idea?
Pitou!

Agamemnon wrote:I've solved this problem on my computer by installing pavucontrol.
I sat the settings at 100%, reboot, remove the package pavucontrol and it's working like a charm now.
That's odd, I was having the same issue and solved by installing alsa-utils instead. I don't have pavucontrol installed.
I'm quite new to Arch and I was thinking about reporting this as a bug against the pulseaudio package in the Arch tracker, but I would like someone to tell me if this is a good idea first...
EDIT: I should clarify that I didn't have to run 'alsactl store' or any other command; installing the package and changing the volume did the trick.
Last edited by Kaoss (2012-07-20 22:30:56)

How do I add an input source besides English in Gnome Shell? [SOLVED]

Hello.
I'm a bit confused as to how I should add additional languages/input sources in Gnome Shell. When I ran Gnome Shell in Ubuntu, I could add additional input sources via the Region & Language section of the Gnome control panel, but in Arch I've only got English (my locale is en_US.UTF-8). I'd like to be able to switch between English & Hebrew.
Do I need to install an underlying gnome package for handling additional input sources? Or do I need to manually add a locale? The wiki seems unclear on this. Also, should I use localectl? I'm also a bit unsure there.
Thanks!
Last edited by yochaigal (2015-02-21 16:38:25)

yochaigal wrote:Or do I need to manually add a locale?
I think so.
Edit the file at /etc/locale.gen and un-comment the desired locale then run:
# locale-gen
https://wiki.archlinux.org/index.php/Lo … ng_locales

Gnome Shell

I want to basically wipe my system clean except for sudo, base and clyde and then install Gnome Shell via AUR/clyde.
Is there an easy way to just uninstall everything? I am currently running Gnome 2.
Also, should I install gnome-shell or gnome-shell-git from AUR?
Thanks!

justo wrote:
Gnome Shell reportedly compiled correctly but when I run ./gnome-shell --replace I get
[justin@Justin src]$ ./gnome-shell --replace
Gtk-Message: Failed to load module "gnomesegvhandler": libgnomesegvhandler.so: cannot open shared object file: No such file or directory
mutter: symbol lookup error: /home/justin/gnome-shell/install/lib64/gtk-3.0/modules/libcanberra-gtk-module.so: undefined symbol: gtk_quit_add
[justin@Justin src]$ Window manager warning: Screen 0 on display ":0.0" already has a window manager; try using the --replace option to replace the current window manager.
Cannot register the panel shell: there is already one running.
Am I missing a dependency?
I do not know what to do about your first Gtk-Message. It doesn't happen to me (at least I'm not aware of it) and Google doesn't help.
For your second error (see e.g. http://mail.gnome.org/archives/gnome-sh … 00059.html):
rm ~/gnome-shell/install/lib/gtk-3.0/modules/libcanberra-gtk-module.so
You might have a look at the Gnome Shell mailing list (http://mail.gnome.org/archives/gnome-shell-list/) when you are in trouble, sometime workarounds are provided there.
Last edited by alexcriss (2011-01-09 09:52:59)

Vlc 2.0.5 and ffmpeg 1.1.3 segfaults if using AAC (MP4A)

vlc segfaults when using aac (mp4a) audio codec on transcode
./asus0.sh: line 10: 20063 Segmentation fault (core dumped) vlc -Idummy -v 'v4l2:///dev/video0:input=1:standard=2:chroma=I420:width=720:height=576' ':input-slave=alsa://' --v4l2-aspect-ratio=16:9 --sout '#transcode{vcodec=h264{keyint=30},vb=512,fps=25,acodec=mp4a,ab=128,channels=2,fps=25,vt=1024000,deinterlace,canvas-aspect=16:9,aspect=16:9,samplerate=44100,hurry-up,high-priority}:duplicate{dst=std{access=http{mime=video/x-flv},mux=ffmpeg{mux=flv},dst=:8080},dst=std{access=livehttp{seglen=10,delsegs=true,numsegs=5,index="/home/vlc/streaming/asus0.m3u8",index-url="http://leelo.folk.ee/streaming/asus0-########.ts"},mux=ts{use-key-frames},dst="/home/vlc/streaming/asus0-########.ts"},dst=std{access=http{mime=video/x-mpeg},mux=ts,dst=:8090},dst=rtp{sdp=rtsp://:8880/asus0.sdp},dst=std{access=file,mux=ts,dst="/home/vlc/save/FILE"}}' --ttl 12 --sout-ffmpeg-strict=-2 --rtsp-host=193.40.120.236
dmesg last line
[61652.892234] vlc[20074]: segfault at 7f3bcd96d9a0 ip 00007f3c4d3ca100 sp 00007f3c34f01c38 error 4 in libavcodec.so.54.86.100[7f3c4d33a000+7b8000]
no problems when using mpga (mp3) audio. And problem starts after ffmpeg 1.0.1 -> 1.1.3

asus0 is symlink to vlc
asus0 -Idummy \
'v4l2:///dev/video0:input=1:standard=2:chroma=I420:width=720:height=576' ':input-slave=alsa://' \
--v4l2-aspect-ratio=16:9 \
--sout \
'#transcode{vcodec=h264{keyint=30},vb=512,fps=25,acodec=mp4a,ab=128,channels=2,fps=25,vt=1024000,deinterlace,canvas-aspect=16:9,aspect=16:9,samplerate=44100,hurry-up,high-priority}:duplicate{dst=std{access=http{mime=video/x-flv},mux=ffmpeg{mux=flv},dst=:8080},dst=std{access=livehttp{seglen=10,delsegs=true,numsegs=5,index="/home/vlc/streaming/asus0.m3u8",index-url="http://leelo.folk.ee/streaming/asus0-########.ts"},mux=ts{use-key-frames},dst="/home/vlc/streaming/asus0-########.ts"},dst=std{access=http{mime=video/x-mpeg},mux=ts,dst=:8090},dst=rtp{sdp=rtsp://:8880/asus0.sdp},dst=std{access=file,mux=ts,dst="/home/vlc/save/FILE"}}' \
--ttl 12 --sout-ffmpeg-strict=-2 --rtsp-host=193.40.120.236
and big -vvv output from vlc is available http://www2.folk.ee/~jaanus/log.txt
valgrind output http://www2.folk.ee/~jaanus/valgrind.txt
strace -ff output http://www2.folk.ee/~jaanus/strace.txt
vlc, x264 & ffmpeg downgrade helps, but this information may be useful.
This issue is repeatable on different machines. No problem with mp3 audio, crash only occures when using AAC audio codec.
Last edited by bannbann (2013-03-01 10:17:35)

[Gnome-shell] make the notification image size depends of the sender

Hi,
I just set up my Arch and decided to make it beautiful.
And one of the things upset me was the size of the profil picture in Gwibber notification.
So I decided to look a bit into the Gnome-Shell code to change that.
Now, Gwibber notification will be displayed with 48px images, while Rhythmbox will still display 125px images.
Here is the code :
In /usr/share/themes/<your-theme>/gnome-shell/
gnome-shell.css
/* We use row-span = 2 for the image cell, which prevents its height preferences to be
taken into account during allocation, so its height ends up being limited by the height
of the content in the other rows. To avoid showing a stretched image, we set the minimum
height of the table to be ICON_SIZE + IMAGE_SIZE + spacing-rows = 24 + 125 + 10 = 159*/
.notification-with-image {
min-height: 159px;
/*=== ADD THIS === */
/* Same for twitter notification :
24 + 48 + 10 = 82*/*/
.notification-with-twitter-image {
min-height: 82px;
/*=== END ADD ====*/
Add the .notification-with-twitter-image section.
The idea is to differentiate the two type of notification to apply different height on it.
In /usr/share/gnome-shell/js/ui
messageTray.js
setImage: function(image) {
if (this._imageBin)
this.unsetImage();
this._imageBin = new St.Bin();
this._imageBin.child = image;
this._imageBin.opacity = 230;
this._table.add_style_class_name('multi-line-notification');
/*this._table.add_style_class_name('notification-with-image');*/
/*=== ADD THIS === */
if (this.IMAGE_SIZE === 48) {
this._table.add_style_class_name('notification-with-twitter-image');
} else { // IMAGE_SIZE === 125
this._table.add_style_class_name('notification-with-image');
/*=== END ADD ==== */
this._addBannerBody();
this._updateLastColumnSettings();
this._table.add(this._imageBin, { row: 1,
col: 1,
row_span: 2,
x_expand: false,
y_expand: false,
x_fill: false,
y_fill: false });
unsetImage: function() {
if (this._imageBin) {
this._table.remove_style_class_name('notification-with-image');
/*=== ADD THIS === */
this._table.remove_style_class_name('notification-with-twitter-image');
/*=== END ADD ==== */
this._table.remove_actor(this._imageBin);
this._imageBin = null;
this._updateLastColumnSettings();
if (!this._scrollArea && !this._actionArea)
this._table.remove_style_class_name('multi-line-notification');
Here we add everything related to notification-with-twitter-image in both functions.
Adding the class, and removing the class.
notificationDaemon.js
// We only display a large image if an icon is also specified.
if (icon && (hints['image-data'] || hints['image-path'])) {
let image = null;
/*=== ADD THIS === */
if (ndata.appName === 'Gwibber') {
notification.IMAGE_SIZE = 48;
/*=== END ADD ==== */
if (hints['image-data']) {
let [width, height, rowStride, hasAlpha,
bitsPerSample, nChannels, data] = hints['image-data'];
image = St.TextureCache.get_default().load_from_raw(data, hasAlpha,
width, height, rowStride, notification.IMAGE_SIZE);
} else if (hints['image-path']) {
image = St.TextureCache.get_default().load_uri_async(GLib.filename_to_uri(hints['image-path'], null),
notification.IMAGE_SIZE,
notification.IMAGE_SIZE);
notification.setImage(image);
} else {
notification.unsetImage();
Here, we modify the IMAGE_SIZE depending if it's a Gwibber notification.
That's all.
Edit: Does someone know how to submit this patch to Gnome-Shell developers ?
Last edited by gravitezero (2012-05-03 15:55:43)

Hi,
I wasn't exactly clear, but yes there is a specific place to add the code.
My patches only add code to the existing one.
You should search in original file for code I didn't add (outside the "===== ADD THIS =====" blocks), and then add my code were I added it.

Gnome-shell segfault when using fglrx

Similar Messages

Maybe you are looking for